PowerEdge 2950 reporting & quot; E2119 Fatal SB Mem CRC & quot; before and after the replacement of the memory.

Similar Questions

• Firefox crashed and after the report is sent and restarted all my extensions have disappeared! How can I recover it?

  I checked the folder %AppData%, but there is still no sign of the extensions that I had installed (which were about 10).

  How can I recover it?

  There is a profile folder by default with a file extension, it contains, but extensions were all parties.

  Quite strange if, somehow it keep the settings. Cause when I tried to reinstall the extensions, it has applied the settings as I had before.

  It fixed now, thank you very much.

• Method of Report.Save, the report has been made in a new path, but why is the empty file?

  Hallo,

  I have a problem to save the report file in a new way.

  In my code, I used the Runstate.Report.Save(newpath, overwrite, 0) method to save the report.

  And after the excution of the test, I can find the file of report in the right place, but if I open it, it's empty, I mean, there's nothing in this report.

  Someone has an idea? Where is the problem? And what I could do?

  Thank you!

  Cabio

  Hi Cabio,

  Before answering your question, I would like to let you know that you can configure the path to the report file in the report file path tab report options.  You can choose from several options, including by specifying an expression that is customized for the report path.  This will allow you to customize where the report is saved without changing code.

  If this isn't meeting your needs, the problem you're likely to have is that you access report until the report is actually produced.  To access the report object after it has been populated, replace the ProcessCleanup callback, which runs after the report has been generated.  (see the example of navigation PreUUTCallback for an example of substitution of a reminder.

  Note: if you use TestStand 2012, this method will not work unless you configure Report Builder for not using a new thread.  You can configure this option in the treatment of dialogue by selecting the checkbox options more results.  If you do not want to use a new thread, you can access the report by changing the sequence of AddUUTReportAndSave in ReportGen_ATML.

• II of the PowerEdge 2950 not allowing for space HARD to be accessible

  Nice day

  I have an old server PowerEdge 2950 II (card: 2x3.0 Ghz Xeon, 24 MB Mem 1 TB SATA HDD, 1 Tb SATA HDD, 2 TB SATA HDD - Server data center in 2012).

  The question I have is that I recently updated the operating system from 2008 to 2012 DC, then installed an extra drive (2 TB).  I run RAID 0, and the system is only show a MAXIMUM of space disk HARD 1.98 TB, with the other Tb 0.02 table allocated to file systems.  RAID Perc 5i controller has all the three marked as online HARD drives.  BUT I can not use the additional 2 tablespoons in the table.  I was going to buy and install a 2nd HARD drive of 2 to SATA and RAID 1 go; but, if I can't fix this storage space not represented in the storage Bay I can't justify the purchase.  If anyone can help I would be grateful.

  So, you have three disks - 1 TB, 1 TB, 2 TB - during a RAID 0, and you expect to see 4 TB of space?  If so, see my notes above.  Each virtual disk (RAID array) is presented to the operating system as a separate 'disc'.  Windows cannot use a more 2 TB drive unless it has been converted to GPT.  First of all, the conversion to TPG is data destructive, so you will need to do a backup/restore.  Secondly, convert your boot 'disc' TPG will not cause it to start on a 2950 because it only supports UEFI, which is necessary to start from a GPT disk.

  Bottom line?  You need to rethink your configuration on this machine.  You could make two 1 TB disks in a 1 TB RAID 1 for the OS (in MBR and bootable on a 2950), and then you could add 2 TB RAID 1 for data disks.  2 TB, it would be unnecessary to convert to GPT, but if you have added more than 2 TB of space, you would then convert that TPG and use as many TB for the data that you can hold in the system.

  In addition, you realize how dangerous running a RAID 0 is, right?

• (Redirected) PowerEdge 2950 - disk failure

  Buon giorno

  HO a PowerEdge 2950 cui non riesco a qa Server da collegarmi console (window sin corso accesso).

  failure of disco 3 he display tell

  STO pensando di riavviare comunque server of it

  My devo acquistare UN disco in sostituzione.

  Come posso fare.

  Grazie by it support

  Sartore franco-

  ADMIN NOTE: replace character removed according to the TOU >

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• PowerEdge 2950 III w / Server2008 64 bit: cannot activate TOE

  I recently purchased a PowerEdge 2950 III with standard options, which includes a double NetXtreme II Broadcom nic with TOE capabilities. Due to some communication problems, it was delivered without active TOE and the TOE installed key. I installed Windows Server 2008 64 bit on it.

  After some time Dell send me a TOE key, and I off the server and installed it.

  In the BIOS, it now says "able TOE." In the Dell OpenManage Server Administrator it said ' able TOE: available 'and' enable TOE: 'Yes. But in the Broadcom Control Suite to unload his abilities he doesn't list that the LSO and CO, PINCH.

  I have tried several things:

  -J' ran "netsh interface tcp > set global chimney = on" to activate TOE

  -disabled the Windows Firewall

  -remove the Broadcom drivers and reinstall them (the more recent on the Dell site)

  -installed the SNMP functionality

  But I can't seem to make it work.

  TOE benefits to the whole Server 2008? If so, what am I doing wrong?

  
  

• Flash 8 GB of PowerEdge 2950 memory cards work?

  Hi I want to improve my poweredge 2950 (I) memory and I have 2 sticks of fbd DIMM, 8 GB at 667 mhz each. There in all 16 Gb, but I m not sure if he's going to work because, back in the day, there were 4 GB sticks support, perhaps because 8 GB sticks did not exist. The questions are, can this work, does not work at all, to recognize the part of memory. ?

  Thank you

  Hi guys just to say what it was. My 2 8 GB sticks well and mixed with the other 6 of 1 GB. Now I have 22 GB correctly recognized by my 2950 I server.

  Thank you.

• Upgrade of ram per server DELL PowerEdge 2950

  Buongiorno,

  necessitiamo di assistenza per UN PowerEdge 2950 venduto a nostro client nel 2008, by cui ormai fuori co (he e S/N FJ0C34J).

  It client vorrebbe fare della di 16GB ram upgrade.

  In attesa di risposta, in want pre-empted by attenzione

  Buongiorno,

  Unfortunately no vendiamo più banchi di memoria per questo modello di server.

  Who can find I banchi di memoria currently available alla vendita.

  Accessories.euro.Dell.com/.../genselector.aspx

  Marco

• riflettore ridondante da sul Server PowerEdge 2950

  Buongiorno,

  avrei need di UN preventivo per sostituzione di UN riflettore ridondante da by server it

  PowerEdge 2950 con number number {{Svc Tag rimosso dal intimate}}

  Fuori co.

  Grazie

  Speaking saluti

  Domenico Procopio

  Domenico,

  Reed is it Server e fine della vita, ancora cercare di way we can it number e lo stato parte. Corretta part links the di di corrente installata, cosi can way side tension.

• PowerEdge 2950-second map PERC to connect to PowerVault 220 s

  Hello

  I have a PowerEdge 2950 unit (Service Tag # NOTE from the ADMIN: maintain the label removed by privacy policy >) and PowerVault 220 s unit (Service Tag # NOTE from the ADMIN: maintain the label removed by privacy policy >).
  I would like to know is possible to connect this PowerVault 220 s 2950? I'm going to put this 2950 Windows Server 2012.

  Initially, this PE2950 came not with additional PERC card. If I want to add in the additional PERC card to connect to PV220s, it is possible to do?

  Hello, jindrax.

  So, I'm not saying it's impossible, but it will get difficult. The PV220s works with a PERC 3 or PERC, which is NOT validated on the PE2950 4. The PE2950 is all the time, we started to switch to SAS, if I remember correctly. So it will be difficult at best to find a card to connect the PV220s.

  Aside from that, using the PV220s with Windows 2012 isn't a good idea either. While windows may have a driver randomly for him, it will not match the firmware and will act "funky" to say the least.

  In this case, honestly you'd be best suited for a large USB drive (4to) and be in a much better position to try to mesh the old technology of today.

• Looking for documentation PowerEdge 2950 III

  The material does not match looking for PowerEdge 2950 III manual/documentation material... the documentation associated with the service tag.  Documentation that seems to be the 2950 base while the material is the version III with the - 7 marked 0 on the front disc.  More useful would be linked to the set, but if not, then at least the hardware manual.

  I realize this is an older system... but I need to be able to show what parts I might need to get from Dell to keep it operational.

  Sorry if this isn't the right forum to ask.  Thank you.

  www.Dell.com/.../manuals

  This is the link to the manuals PE2950 etc.  If there is a different version, I can't find it.

• PowerEdge 2950 iii E1410 CPU IERR

  I just bought the parts for my new old dell poweredge 2950 I put the e5440s dual xeon inside and it gives me a cpu mismatch so I take cpu 1 and it starts very well (I also put cpu 1 in any other slot and it worked). When I just loaded CPU 1 that he would give me e1410 IERR I looked at the decision-making and 4 pins were bent moderately. If the bent PIN will cause this error.

  PowerEdge 2950iii

  DRAC 5

  32 gigabytes of ram fb ecc

  Xeon e5540x2

  Hello.

  Yes, misaligned pins can cause error internal processing, e1410 IERR due to a communication channel dropped because the processor is not firmly on hold.

• DELL PowerEdge 2950 PERC 5 / i

  Dear members,

  I have server Dell PowerEdge 2950, I need to install Windows 2003 Standard Edition and save it as a file server for my network.

  So I bought 2 TB SATA WD HDD, I would like to create RAID 1.

  As a trial, I connected two 145 GB SAS and a 2 TB SATA Bay and switch ON create RAID1.

  Please guide me how to create RAID 1 using PERC 5 / i utility of configuration?

  My version 5 PERC / i integrated 5.0.2.0003.

  Thank you

  Tony

  You cannot mix SAS and SATA drives in a RAID array.

• PowerEdge 2950 - order replacement HARD drive

  We recently replaced among 300 GB three SAS hard drives in a PowerEdge 2950, after seeing 1810 Code error 1 HARD disk fault.  We would like to order replacement disks to have on hand, but must be sure that we order is fully compatible.  The reader, we have removed is Seagate ST3300656SS with Firmware HS09 and certified as a disk HARD of Dell Enterprose class.  I understand that just order a Seagate drive of the same model number is not enough.  How can we be sure we are ordering the right items?

  finbarrd

  How can we be sure we are ordering the right items?

  Make sure that the disc is "certified" (Dell co-branded with a Dell Reference number):
  http://www.Amazon.com/Seagate-ST3300656SS-Dell-Cheetah-LABELED-ST3300656SSDELL/DP/B003FO8POG

• If Server PowerEdge 2950 [CF]

  PowerEdge 2950 Server
  Comunico che he server in oggetto da i seguenti if: E1000, E1218 ed E1219.
  Richiedo UN intervento con massima urgenza.
  Codice H84QC3J Server
  Francesco

  Buongiorno, the sto contattando by mail.