Portege R600 - detected SD cards but cannot navigate or format

Similar Questions

• Satellite 1410 S102: WLan card detect the SSID but cannot connect

  I have no PA3458U-1MPC installed part of the mini-map wireless in my PC Toshiba 1410 S102.
  The card works well, that it detects wireless (SSID) but the problem is that I can't able to connect to my router and also there is no light wireless ON my laptop. Thanks in advance for the help

  Check if the device that you have added to your laptop is working properly. To do this, go to control panel - system - device manager.
  Your wireless network adapter should be listed here.

  Note that you must enter the security key for your router to access the wlan. Another thing you could try is to check the settings of your router or if installed firewall, not that there is any set of restrictions, preventing you to connect.

• X 200 wireless problem - detects available networks, but cannot connect to them.

  Hi all

  I have a weird and annoying problem. My X 200 can detect wireless networks but refuses to connecto to them.

  It's a brand new computer that I just received.

  Some info:

  ThinkPad X 200 7454-2HU, running Vista x 64.

  Downloaded latest drivers installed, all using the autopilot to Lenovo download application.

  The driver has detected in the Device Manager is: Intel Wifi Link 5100 AGN.

  There is no problem with the wireless network (the other computers connect to it without any problems).

  I tried to cancel the option "n", leaving a "b/g", but it did not help.

  It is problematic that only one device in Device Manager, and it's "Controller of Bus SM" (cannot understand what it is and update windows or Lenovo update does not solve this problem).

  When I use "Intel ProSet/Wireless Tools" diagnose, I get:

  Test equipment: managed (wireless hardware is enabled)

  Pilotass. Driver is loaded. NET w5v64 Versio: 12.0.0.82

  Radio test: past. The radio is on.

  Scan Testass. There are 12 networks available to connect.

  Association test: failed. No partner.

  When I look at the statistics, it seems that the card receives bytes (nothing is sent).

  What do you think? Is it a hardware problem or software?

  No idea what can be done if it is a software problem?

  S.

  
  

• I want to add a usb 3.0 for a 380t card but cannot find an outlet.

  Cannot find a power outlet 4 extra pins. There is a female P8 6-pin but I think it's for extra fans.

  There are also two plastic plugs 'looks like' with no limits attached to the power cable & are labeld, I think than P4 & P5.

  Don't see how something could be plugged into them as they are closed.

  Hello

  Yes, you can get 4 pin molex adapers for these sata connectors.  Try to www.newegg.com I don't know how much power draw comes off the USB 3.0 card, but you may consider using an adaptor molex to 6-pin connector that is not used. Power supplies were typically 4 molex connectors that you can use a splitter cable in Y molex.

• T430 to 6300 Centrino ultimate upgrade detects the network but cannot connect

  Hello

  I recently bought a wifi card 6300 centrino on ebay with the correct FRU (60Y3233) of a centrino 6205. The new card detects networks, but it can't connect to the networks. no idea why?

  Edge has 6300 card option, so who have already sold it is you already tell you a lie.

  If reinstalling the drivers do not work, and your card 6205 worked previously then it means that this card has a problem that the seller did not talk to you.

• I can connect to ad hoc networks, but cannot navigate

  I have a compaq laptop with VISTA home SP2 original base. I have can create and connect to ad hoc networks but once established connection, other computers on the network do not appear on my network card, so I can not navigate on their.

  they can see my laptop on their network, but they can't sail too not my camera. It is shown as "inaccessible" on their network

  I activated files and printers, sharing, file sharing and all the options.

  XP and 7 do not have this problem, vista laptop to have this problem

  Please help, I'm frustrated

  Thanks in advance

  Hello santu

  The link below has a multitude of steps that you can use to try to resolve this problem. I hope this helps.

  http://forums.techguy.org/networking/925138-solved-ad-hoc-network-CMPTR.html

• antivirus detects a virus but cannot remove it.

  Original title: my antivirus detects the virus, then I try to run the program to delete but it won't let me?

  I was struck by the virus, ive tried several different programs, which find them all, but when I try to remove them, he said cannot run the program.

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Portege R600 - software SIM card which warn for incoming call

  Hi all,

  I just plug my sim card in my laptop, everything works :) but I have a quesiton...

  Is it possible, (when someone call me while my sim card is in the laptop) some software or that never notify me of incoming calls?
  As there is an option to play sounds on my laptop when new cams sms message.

  Thank you.

  Hello

  This software is not known to me and to be honest, I doubt that it s is available on the market, but google a bit... maybe you will be lucky
  I n t could find none :(

  Cheers mate

• C50D-A-133 satellite detect WIFI connection but cannot connect

  Hello world!

  I have a problem with the internet connection from my laptop.
  Earlier this week, I noticed that my internet is very slow.

  Now a few days later I can not connect with my wireless network more.

  My other laptop can still connect with the network, so I think that there is something wrong with the windows drivers 8.1?

  Because I've read some things other people who have had the same problem but I couldn't solve the problem.

  It's a toshiba Satellite C50D-A-133 with qualcomm atheros ar956x as an internet adapter

  Can someone help me with this problem?

  Kind regards
  Hannes Van den Berghe

  {quote} My other laptop can still connect with the network, so I think that there is something wrong with the windows drivers 8.1? {quote}

  According to your post, you were able to connect the laptop to the router WLan.
  In this case, the WiFi connection has been established correctly.

  I put t think there is a problem with the laptop s Wlan connection. Your WLan router is probably some problems and that is why I recommend to reset the router.

  In addition, you could test the LAN connection.
  In case you have a problem with the connection to the local network, the configuration of the router should be checked.

• Tecra A2 - connected to the WIFI router, but cannot browse

  Hi and help!

  I have a Tecra A2 and using the huawei HG520b router, I have a connection ok, but cannot navigate. Been in contact with my provider, had 2 hours of help and they say it's a problem with my laptop.

  I've updated the driver WLAN and now am losing to live... any suggestions would be great. Thank you

  Hello

  Did you check if your router has an Internet connection? If your router doesn't have a connection, you are not able to navigate through the Internet.
  Check this box!

  In addition, it would be interesting to know what browser you use. You can test another like Firefox or Opera?

• Portege R600 cannot detect Toshiba Slim Port Replicator II PA3603U-1PRP

  Hi all

  My Toshiba laptop is Toshiba Portege R600 D260 with Toshiba PA3603U - 1PRP Slim Port Replicator II (REF: PA3603U-1PRP), the problem is "PA3603U-1PRP Toshiba Slim Port Replicator II can't detect the USB Port.

  I wonder that PA3603U-1PRP Toshiba Slim Port Replicator II is not suitable for Toshiba Portege R600 - D260.
  Please help me,
  My Skype: hau.vancong

  According to the specification of the laptop, with this notebook, you must use Toshiba Replicator Slim of ports with PA3681E-1PRP part number III.

• Portege S100: SD led flashes but the SD card cannot be recognized

  I tried several SD cards (size & make) in a S100, while the device tandis que l' appareil clignote flashes light when I push the SD card, it does not appear as a disk. The format utility does not show an installed device, nor the password protection software.

  The laptop is running XP pro.

  An idea

  Hello

  According to the user manual the laptop supports several sizes with SD cards, but housing is unable to accommodate multimedia cards (MMC)
  don't forget to use the right card (Toshiba)
  But if you use the right SD card so I would recommend removing the slot and the driver for the SD card from the Device Manager.
  The new after reboot, you must reinstall the driver again. Check the Toshiba driver pager for the SD card driver updates.

• Portege R600: SIM inserted but error: "device not found".

  Hello

  Portege R600 under XP.
  Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".

  Cannot find the configuration options or anything like that in the manual.
  Can someone point me in the direction of literature?

  Thank you very much!

  Evan

  Hello

  Here you can download the latest version of 3G driver and tool:
  http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads

  Here you will find a knowledge base on the topic of G 3:
  http://APS2.toshiba-tro.de/WLAN/?page=3ghowto

  and here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Hope this helps

• Portege R600-10 q - 3G modem adding internal (Ericsson F3507g card)

  Hi all

  I recently bought Portege R600 but without 3G module. (at that time was not available). So I'll be happy to know what type of card numbers etc. of the piece. I need to buy and where to have the internal module 3 G works on my machine R600-10 q.

  Thank you in advance,

  Dave

  Manufacturer: Toshiba

  Device: G450

  Connection type: USB

  A new software is available from this link:

  [ftp://smccust020:[email protected]/TOSH/Setup.exe]

  This (3.7.671.33) fixes the problem with the update of DotNet framework v3.5.

  Support of SmartCom

• Portege R600-10 q - SD cards does not always work

  Hello

  I have a r600, but there seems to be a problem with an sd card,

  2 GB SD cards bed perfectly, but if I put a 16 GB SDHC sometimes read, sometimes not...

  When I put the 16 GB sdhc and the pc recognize, if I try to paste a folder of movie with 4 GB, it pops up an error message saying something about «error semaphoro...» »

  Anyone know what this means?

  Thank you

  The Portege R600 supports up to 2 GB SD cards and SDHC cards up to 16 GB.
  So it should work, but have you tried to format the cards with the Toshiba SD card utility?

  Last but not least try to update the driver for the card reader that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers