PowerEdge T310 HDD 1 failure [CF]

Similar Questions

• PowerEdge 2950 HDD Predictive Failure

  Hi Experts

  We have PowerEdge 2950 with 5 RAID PERC 6 / i integrated. It has 3 hard drives SAS and is to show the Predictive Failure HARD drive for two SAS drives and each HARD drive is 400 GB. The same size disk is not available now and the seller asks us to use 450 GB HARD drive. Is it possible or we should insist on getting 400 GB SAS HARD drive?

  Concerning

  It will work, but there are some risks involved.  Here is a good post on spiceworks where few people are talking about possible problems.

  http://community.Spiceworks.com/topic/275664-mixing-10K-and-15K-rpm-speed-disks-in-servers

• PowerEdge T310 size maximum Sata HDD

  I would like to put a 6 TB of SATA HARD in a Dell PowerEdge T310 drive, but before you buy the car I want to know if it would work.

  I do not want to use RAID functions, let me just reattach the drive using SATA.

  On the technical specifications for the server, he said that SATA is 2 TB maximum internal storage is from 12 to.

  Kenny_G1892,

  With the T310, with SATA, technically drive 6 TB has not been tested, but it is not a limitation of current. Currently the largest, we propose you for the T310 is a 4 TB drive. I would say that it needs work, but remember that with some operating systems, there is a limit of 2 TB.

• Mio Server DELL PowerEdge T310 parte non più [MS]

  Buongiorno,

  Server of it our PowerEdge T310 con only 12.1 OpenSuse, e crashato e non più riusciamo a farlo centred.

  He nostro e HDD in raid 10.

  He codice di che viene riportato e error:

  i8042 no controller found.

  POI cerca di do lo start di a startup fast di linux.

  Diagnostica seems to che Attraverso I brain siano intatti e che no, siano if HW.

  Attendiamo sua risposta.

  Grazie,

  Simona

  Salve,

  Dal tag Bolivia vedo che configurazione del sistema e senza controller raid by cui he #10 di cui e parlate raid raid software made dall'OpenSuse, oltretutto error i8042 no controller found e a di d led to the linux kernel error.

  Per quanto far nostra assistenza, in questo caso specifico, this exclusively di problemi hardware che occupiamo da quanto da voi sembrerebbero no esserci reported.

  Nel caso abbiate non ancora efffettuato the material diagnostica consiglio di effettuarla quanto prima, nel caso, invece gia sia stata effettuata e this non siano would be if he caso che vi rivolgiate ad a sistemista by the riparazione/ripristino del operating system linux.

  Speaking saluti

  Manual

• DELL PowerEdge T310 [FG]

  MI serve una offerta di una con HDD 146 GB (1DKVF) by und Dell PowerEdge T310 :-numéro of series:

  ADMIN NOTE: Details removed by privacy policy

  Mia Scheda:

  ADMIN NOTE: Details removed by privacy policy

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  -Service tag del Server

  By the spedizione: 1 Nome Società: 2. address: 3. Città: 4 Provincia: 5. Cap: 6 name/last name/number phone/e-mail del referent in loco:

  By the società in Nome fatturazione 1 (is it client codice): 2 Via: 3: 4 Provincia Città: Cape 5: 6 name/last name/number phone/e-mail del referent by the fatturazione: 7 Partita IVA

  Speaking saluti

• PowerEdge T310 - install second disc as raid1 with dell server administration software?

  Hi all

  Quick question - we have a PowerEdge T310 with a disk in it. We want to install a second drive and put them in raid1. Issues related to the:

  1. Can we use software from dell server administrator to do?
  2. This will delete the volume on the current drive.

  In a perfect scenario, we want to just install the second disk, set up in raid 1 and call it a day.

  Thanks for the tips!

  1. Yes.

  2. function:

  If your drive is existing in a single drive RAID 0, so it CAN be converted on the fly to a 2 drive RAID 1.

  If your existing drive is a volume not RAID, she cannot be converted on the fly without loss of data.

  The SAS 6/iR and series S PERC H200 supported RAID and non RAID, so the chances of a disk being a RAID 0 array is extremely low.

  PERC 6 / i and H700 do not support no RAID, for a single disc can only be a RAID 0, so convert to RAID 1 is fine.

• PowerEdge T310 Guasto

  If line preventivo scheda madre e alimentatore PowerEdge T310 serial number: JCDNP4J.

  In attesa di riscontro vs.

  Saluti

  Ilario Vecchi

  Buongiorno, the sto contattando by mail

• Adding new HARD disk to the current setup RAID1 on PowerEdge T310

  Hello

  I have PowerEdge T310 with SAS 6/iR controller. I've configured as RAID1 with 2 x 500 GB HARD drive. Now I would like to add another disk HARD 2. Is it possible to do with the material current & configuration? IS SAS 6/iR support for additional HARD drive?

  Fauzi79,

  Unfortunately with the SAS6/ir you don't have the ability to develop. You must back up the data, delete the table, add readers, then reconfigure the table. After that, then install the operating system and restore the data. Sorry I couldn't give you the answer that you were missing no doubt, but it is a limitation of the controller you are using. If a Perc 6 / I installed then the expansion process is relatively simple.

  Let me know if this helps to clarify.

• get the error: 1720-smart hdd imminent failure (failing attr:0 = |) when starting?

  HP cpmpaq notebook 6710 model skuno:rj459av b

  I am getting error 1720-smart hdd imminent failure (failing attr:0 = |) when starting.

  Need to change the HARD drive or other needs please specify.

  Can I replace it with new 500 0r 320 HD (like my perivious one is 120 GB 5400 RPM)?

  If not then where I get the 160 GB HARD drive or less because of our days is hard to find this type of HARD drive, out service in the market.

  Please give me as soon as.

  Kind regards

  Varun Pandey

  Oracle DBA

  Varun Pandey
  Oracle DBA

  You can use everything you can find on the market. Just be sure that it is a portable thickness 9.5 mm SATA HDD. The maximum size available is 1 TB. Here's the manual showing how to replace the drive.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c00911959/c00911959.PDF

  I don't remember if the 6710 b has a connector on the connector sata on the standard black plastic drive but do not panic if the drive when you pull a link that seems different from that of a disk sata hard. There is a piece of plastic card black you need to remove the old drive and reuse. It can be put in place so that the sata connections just plug right into the motherboard.

  This is a good deal on a 7200 RPM 320 GB drive:

  http://www.Newegg.com/product/product.aspx?item=N82E16822152235

  I won't use anything other that a disc of 7200 RPM... it offers a significant improvement in access to time and the boot file.

• How can I check the configuration on a PowerEdge T310 raid

  Please how to check raid on a Dell PowerEdge T310 server configuration without restarting?

  By using the software OpenManage Server Administrator - under storage, Controller/PERC, virtual disks.  What operating system do you use?

  You might also be able to deduce the configuration view of your RAID controller (must be under SCSI/RAID controllers in Device Manager), knowing the number of physical disks installed and knowing the number and size of "disks" that Windows is currently using in storage management.

• PowerEdge T310 - SAS HDD

  Buonasera. I like due brain di ricambio di acquistare. He went up to Server 2 x Nearline SAS 931,00 GB hotplug PERC H200 RAID 1 che su MK1001TRKB, recoupling, venere.com reperibili essere solo a UN costo insozzare (by una macchina di questo level eta ed). Sono incerto, my credo sia possible installare brain SAS (no Nearline), spero reperibili a costi più acceso. Know VI? Grazie.

  By T310 can essere projector brain that online accessories.euro.dell.com/.../category.aspx

  TRA questi, sono anche dei brain SAS (no nearline)

  Saluti

  Marco

• Satellite M30-604 external usb hdd boot failure

  Hello world

  Hard drive problems seem never to end for me.

  I have a satellite M30-604. Recently my Hitachi HDD crashed. Now, I am trying to boot from an external hard drive via usb, but I can't.

  (a) I use a ViPower 3.5 "(model VP9258T) enclosure external usb 2.0"
  (b) with a Seagate 200 GB hard drive.
  (c) I used the recovery cd to install windows on the seagate
  (d) the bios (v1.4) seems to support the external device to start
  (e) the internal hdd crashed is deleted (it's internal hard drive space is empty)
  (f) the bios sees the drive and recognizes it as a USB

  I think it should work, but when I turn on the computer, after a while, he says: "0201: failure IDE #0"
  and gives me the options to run the program installation or start-up.
  When I choose boot it gives me the window with "boot in safe mode" screen, 'last known good configuration' etc, but nothing of the work options (it restarts and gives the same again).

  Any ideas please?

  [Edited by: admin on 26 May 05 16:30]

  Hello

  My research on this subject has led me to believe that it is not possible to boot an operating system of attached USB HDD XP. I read several posts on various usenet groups on this issue, and the consensus of opinion is that it is simply not possible.

  Several suppliers of BIOS claim allow a USB HDD to be suitable for start-up purposes but I still have to attend such a machination succeed with XP.

• PowerEdge 2950 HARD drive failure

  Hello

  Sorry for the newbie question, but I have the following scenario (where I have no experience dealing with the old servers)

  We have a set of old servers (DELL PowerEdge 2950) that migrate again (IBM X Flex), one of the old server is MOSS 2007 with 2 HDD, suddenly primary HDD is dead and in menu missing with setup. I removed old server on another HARD drive and mounted on the MOSS 2007 server and initialized. the question is how do I replace the HARD drive died with a new one and copy another disk configurations HARD live

  Please if you need more information just ask in answers because am new on this servers with 0% experience

  Thank you

  ---------------UPDATE-------------

  the current RAID is RAID 0 and I found that a backup windows (from previous system admin) file so it is possible to format the two HDD, configure RAID for RAID 1, install windows, and then restore the backup?

  also, I was reading this article " " but I couldn't change the RAID, so any suggestion?

  You need drivers ("hard drive" version, run to extract before use):

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=GHNKT&FILEID=3000719989&osCode=WNET&ProductCode=PowerEdge-2950&LanguageCode=en&CategoryID=SF

• Dell PowerEdge T310 Memory Upgrade configuration

  Hi all

  Currently I have a T310 with 2 x 4 GB memory

  Information about the DIMM:

  (Hynix 4 GB PC3-12800 DDR3 - 1600 MHz ECC Registered CL11 240 - Pin DIMM memory rank double Module Mfr P/N HMT351R7CFR8C-PB)

  I intend to add with a total of 6x4Go = 24GB 4x4GB

  This new configuration of memory will be supported?

  Thanks for the reply

  See more info on the server below;

  Server has 1 CPU (Xeon x 3430 @ 2.40 Ghz)

  Memory information: Ok

  Attributes of the bars of memory

  Attributes; Memory Matrix 1
  Location; Motherboard or motherboard
  Use; System memory
  Power installed; 8192 MB
  Maximum capacity; 32768 MB
  Available slots; 6
  Locations used; 2
  The ECC type; Multibit ECC

  Total of bars of memory

  Attributes; Value
  Total installed capacity; 8192 MB
  Total available power to the BONE; 8192 MB
  Total maximum capacity; 32768 MB

  Table 1 of the memory details

  Status; Name of the connector; Type; Size
  OK; DIMM_A1; DDR3 - synchronous registered (buffered); 4096 MB
  OK; DIMM_A2; DDR3 - synchronous registered (buffered); 4096 MB
  Unknown; DIMM_A3; [Not busy];
  Unknown; DIMM_A4; [Not busy];
  Unknown; DIMM_A5; [Not busy];
  Unknown; DIMM_A6; [Not busy];

  Device memory information: Ok

  BRIEF on connector: DIMM_A1

  Attributes; Values
  Situation; OK
  Device name: DIMM_A1
  Size; 4096 MB
  Type; Synchronous DDR3 registered (buffer)
  Speed; 0.63 ns
  Failures; None

  Device memory information: Ok

  BRIEF on connector: DIMM_A2

  Attributes; Values
  Situation; OK
  Device name: DIMM_A2
  Size; 4096 MB
  Type; Synchronous DDR3 registered (buffer)
  Speed; 0.63 ns
  Failures; None

  Components (FRU) Information System

  Device; Serial number; REF.; Revision; Reference of the manufacturer; Date of manufacture
  System Planar (BMC); CN1374008602B7; 02P9X9; A00; DELL; Mon Aug 09 04:00 2010
  1 power supply (PS 1); CN1797208E0NQR; 0N884K; A00; DELL; Mon 16 Aug 10:25 2010
  DIMM_A1; 4B55A111; HMT351R7CFR8C-PB; S/O; Hynix Semiconductor (00AD04B380AD); Mon Apr 09 16:00 2012
  DIMM_A2; 4B15A14C; HMT351R7CFR8C-PB; S/O; Hynix Semiconductor (00AD04B380AD); Mon Apr 09 16:00 2012

  You can always memory of control similar to the one you already based on the part number. Also check the link below for memory other compatible Dell:

  http://Accessories.us.Dell.com/SNA/category.aspx?category_id=8136&c=us&l=en&s=BSD&CS=04&mfgpid=203788

• PowerEdge 2900 showing predicted failure after disk replacement

  Hello

  I posted this same message in the forum of the disk drives, then I realized there's a specific forum for disks hard server so I'm copying here.

  We have a Poweredge 2900 with HDs 2x500Gb on RAID-1. One of the drives has failed and we replaced it with an identical disk that works very well (same brand, model number Seagate, etc.), but without a Dell PN.

  After replacement, the controller began to rebuild the RAID, but it shows "predicted failure = Yes" for this new album. The disc is currently still under reconstruction.

  One thing to notice is that apparently the Perc firmware is outdated. OpenManage shows that the current Perc 6 / i firmware version is 6.0.2 - 0002, and the minimum required version of the firmware is 6.2.0 - 0012. If I go to the Dell support site and enter a label for the Server service, it shows me a download available for the Perc firmware with version 6.3.3 - 0002.

  The questions are:

  -Is generally allowed to use not Dell certified readers if they are of the same brand and model as the other disk?

  -How would I determine the source for the warning of predicted failure?

  -It would have something to do with obsolete Perc firmware? Are there risks associated with Perc firmware upgrade?

  Thank you very much in advance for your help!

  --
  Julio.

  Update for our fans to the forum thread. Original poster concluded that used replacement drive was indeed bad. He is later replaced by a good drive and will update the server accordingly.