PowerEdge VRTX CMC PowerShell WSMAN documentation/examples

Similar Questions

• VRTX CMC stuck to acquire intellectual property

  I have one of the VRTX chassis with two blades installed.  Now, I don't know what happened, but I was connected to the CMC web interface and activated the DRAC for each of the blades, then I've lost the ability to connect to the CMC.  It goes directly to the switch management console.  On the front LCD, CMC is never able to get an IP address.  I can't figure out what I did.  Any help and suggestions and criticisms are greatly appreciated!

  Yes.  I'm not sure what would not, but after connecting to the console and do a factory reset, it has acquired an IP address and I was able to start to set up again.  I suspect it is a setting of VLAN that I screwed up when I was setting up the network.  I was much more careful this time.

• Not yet documented examples of Applications download the link ADF not working not

  Steve Muench not yet documented ADF Sample Applications located at http://blogs.oracle.com/smuenchadf/examples/
  
  The download link for samples does not. He headed Oracle JDeveloper Product Page instead.
  
  By clicking on the title of any sample application used to allow download of the example file. Now that it's pointing to http://www.oracle.com/technetwork/developer-tools/jdev/overview/index.html
  
  Is there another way to download the sample applications?
  
  Thanks in advance for your help.
  
  Mitesh

  Refresh your browser on my samples page and click on the link for #145. It should work now.

  The base directory is not navigable, you must know the full URL to the file.

  I added #145

• Dell PowerEdge VRTX followed in SCOM R2 2012

  We use SCOM R2 2012 and already installed the Dell suite Management Pack v6 but unable to snmp trap events received in the management pack.

  Anyone has a solution on this?

  FREDPH

  Discovery of the chassis VRTX is not a problem and everything is the value of the community string and run as account on SCOM - with the help of Dell support.

  We followed the post below and we we able to receive SCOM snmp traps, but this isn't what we want. We want to receive snmp traps from Dell management pack alerts.

  You must use run as accounts for detection and analysis. Please see installation and usage guides for instructions on setting up the accounts to run as for surveillance. Looks like you have already set up for the discovery, but you must set up an account run as for monitoring when you enable the feature:

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-Srvr-Mgmt-pck-v6.0-mscom/manuals

  Thank you

• Good Dell p/n for GPU NVIDIA for GRID K2A for Dell PowerEdge VRTX

  To install a NVIDIA GPU to map GRID K2A in a VRTX, but not sure of the correct reference to Dell.

  DP/n: KVJ6K would be not compatible?

  Thank you

  Hello.

  I could not find the DP/n compatibility information: KVJ6K with VRTX. Dell Reference number: 98RCK for NVIDIA, grid K2A, virtualized Graphics, 8GB, full height, VGA1 is compatible with VRTX.

• VRTX & PowerEdge M520 storage does not

  We try to deploy VMware ESXi on new shared infrastructure VRTX DELL platform and are facing problems with the configuration of the shared storage.  No matter what I try, I can't Server blades to recognize no shared storage.

  I went on every BIOS unique & iDRAC that exists, everything seems OK.  In addition you try VMware, I also tried to attach a virtual disk to see if I can install Windows via the OS deployment in the lifecycle controller.  Deploy the operating system won't start even as he complains, there is no controller RAID or available in the installation disk of.

  I also have an error message in storage blade iDRAC server settings.

  DELL support does not appear to have ideas after spending a few hours with them this morning.  I've attached screenshots as well, I hope someone has an idea?

  This is the guide I used:

  http://en.community.Dell.com/TechCenter/Extras/m/white_papers/20433523.aspx

  

  I think I've answered my own question.  It seems that VRTX supports starts in the custom VMware A01 ISO DELL, I was using A00.  I'm loading A01 right now so hopefully it will work.

  Dell:

  Prerequisites

  The blades PowerEdge VRTX supports the Dell of VMware ESXi 5.1 Update1 only spin to the RTS. The image is available for download from the Dell support page. Note that support starts from A01 revision from.

• Where is the documents and examples for BlackBerry Push Services Developer Webcast in April 13

  The Web casts are very important for developers who want to use the new Blackberry service push.

  But I know that many developers did not attend the webcasts.

  Could you tell me where I can find documentation & examples in the webcasts please?

  Thank you very much!

  Frank

  You can view the recorded webcast by clicking on this link:

  https://event.ON24.com/eventRegistration/EventLobbyServlet?target=registration.jsp&1=undefined&event...

• Orchestrator + powershell script: variable

  Hello

  I want to create a workflow with an external script powershell and "scriptable task."

  First step:

  1. I set my input parameters in the "Task Scriptable" and "script" my variable entry for the external script powershell tab: scriptArgs = Variable1 + "" + Variable2;

  2. I get my variable in my outside first PowerShell script-> at this point it's OK

  3. in my outside first powershell script, I create variables $var1 and $var2

  Second step:

  1. I created a 'Scriptable task' and I want to get an exit powershell ($var1 and $var2) as a starter for my 'scriptable task. "

  I don't know how passing a powershell variable to any other 'workflow element' or 'scriptable task. "

  Invoke an external PS workflow script returns as objects of the output of type PowerShell:PowerShellRemotePSObject.

  You can use it to extract data from the output of the powershell script. Example is provided with the plugin inside the folder library/PowerShell/samples/list directory content workflow

  You can use PowerShell:PowerShellRemotePSObject to receive the output as raw xml, PowerShell:PowerShellRemotePSObject.getXml() data or using getRootObject() directlyas objects of type PowerShellPSObject, and then use getProperty (xxx)...

  Here is an excerpt of the example workflow to browse the list of files returned as a result of the invocation of the ps script.

    // Get PowerShellRemotePSObject
    var psObject = invResult.getResults();
    var directories = psObject.getRootObject();
  
    var isList =  directories instanceof Array
    if ( isList ){
    for (idx in directories){
    var item = directories[idx];
    if ( item.instanceOf('System.IO.FileInfo') ){//check type of object
    System.log( item.getProperty('FullName') );//extract value from result
    }
    }
    } else {
    System.log( directories.getProperty('FullName') );//extract value from result
    }
    }
  ...
  

• Is the zip file download of Oracle Database 11 g include doc and examples

  Hi Experts,
  
  I download Oracle Database 11 g Release 2 Standard / Enterprise Edition from here:
  [http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html]
  
  Its size is 2 GB for Microsoft Windows (32-bit).
  When I click to see all the link. It opens this page (Please check this page):
  [http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win32soft-098987.html]
  
  It shows all Oracle database 11G database components links user who want to download.
  
  I want to download this: (to the first link on this page)
  Oracle Database 11 g Release 2 (11.2.0.1.0) for Microsoft Windows (32-bit)
  Download win32_11gR2_database_1of2.zip (1,625,721,289 bytes)
  Download win32_11gR2_database_2of2.zip (631,934,821 bytes)
  
  
  This page also shows a link for:
  Oracle Database 11 g Release 2 examples
  Download win32_11gR2_examples.zip (565,154,740 bytes)
  Examples of use of the Oracle database. Download If you're new to Oracle and try some of the examples in the Documentation.
  
  
  Query: Is - this downloadable zip file includes documentation (which indicate in the link documentation in his Direction) and Oracle Database 11g Release 2 examples?
  
  Or should I download separately for Oracle database 11 G, documentation, examples.
  Please say.
  
  Thank you.

  Documentation 11 GR 2 individual files can be downloaded from http://www.oracle.com/pls/db112/homepage

  The installation guide for the examples is http://docs.oracle.com/cd/E11882_01/install.112/e24501/toc.htm

  A full CLOSURE of the documentation can be downloaded from the link to http://www.oracle.com/technetwork/database/enterprise-edition/documentation/database-093888.html

  (available from http://www.oracle.com/technetwork/documentation/index.html#database)

  Note: The documentation is all updated for 11.2.0.3 However, download of the software is for 11.2.0.1 only because the 11.2.0.3 of the software requires a Support contract.

  Hemant K Collette

• PPS and timekeeper FPGA

  I use the timekeeper of FPGA to synchronize my 7966 FlexRIO FPGA to the system clock of the controller of my SMU.  It works well and give me about 5 of error.

  A PPS (from an external reference) can be used to increase the precision of the FPGA timekeeper?  If so, are there algorithms (FPGA VIs) already developed for this?

  Thank you

  XL600

  If you download the 1.1b0.zip FPGA timekeeper from the link below, it will download the Timekeeper.lvlib FPGA, documentation, examples and timekeeper. In the folder of the example, there is an example that shows how to synchronize to the PPS.

  https://decibel.NI.com/content/projects/NI-TimeSync-FPGA-timekeeper

• Facilitate communication instrument via VISA/dll library

  Hi, I just receive a new piece of equipment that I would like to order via Labview and I am having trouble to communicate began with the device - a spectrometer in Acton (previous on the topic post). The device can connect via a usb or RS-232 cable and appears in as COM 5 and correctly Device Manager the label as the spectrometer of acton.

  I have the instrument dll file and the header file and a detailed description of all the functions but I'm scared, I am at a loss to know how to start. I already wrote labview programs to communicate via the read/write functions VISA but this instrument communicated through hexagonal orders and seemed easier for me to work with this new instrument where it looks like I need to send commands to chain - I'm getting lost in the syntax and correct structuring of the functions. The node to call a library function lists the functions of the dll, but I'm not clear on how to take of the generic Sub funcname (void); and match it to their arguments and the functions described.

  I'm also not sure what options I have to communicate with the instrument, is using the dll with node to call a library function at a level equivalent to sending a command string via the entry VISA, or are what they used in combination or can the nodes to call a library function be used alone for release with the instrument? I understand that these questions are very basic/generic I have just had trouble finding resources to learn the answers to these questions as links to be NEITHER documentation/examples or other messages from the forum would be greatly appreciated.

  I am including as an example some info on the first basic command I would start as per - a simple device search command:

  ----------------------------------------------------------------------------------

  "detailed description":

  ARC_Search_For_Mono, function used to search for attached Monochromators. With the
  exception of ARC_Ver, must be the first function call.
  Delphi: function ARC_Search_For_Mono (on Num_Found: integer): wordbool;
  STDCALL;
  VB: Private Declare Function ARC_Search_For_Mono Lib "ARC_SpectraPro.dll".
  (Num_Found As Long) As Integer
  Num_Found: The number of research Instruments Acton found and listed.
  Enumeration list begins with zero and ends with Num_Found minus one.
  Result: True, if all of the instruments where found.

  ----------------------------------------------------------------------------------

  a code in the dll header file:

  typedef unsigned _int16 (CALLBACK * LPFNDLL_Search_For_Mono) (long &);)

  ----------------------------------------------------------------------------------

  Any help would be appreciated, I think I just need a little help to get started. Thanks in advance!

  Because you neglected post in the the model number of this intrument, everything would be conjecture at this point.

• How to detect the camera firewire on labview?

  I set up my camera IEEE 1394 Basler A 601F. It is detectable on MAX and video it is displayed by the wizard of vision. I have labview 8.2.1 installed with the kit of vision and movement. I need to get the stream in labview for furthur video processing. Should I have the Vision Development module for this?

  Furthermore, what is the process to get the video from a firewire camera in labview. It is similar to the video for USB cameras getting?

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  Dear Asad,

  There are three different Modules in National Instruments Vision:

  1. Vision Development (VDM) module
  2. Vision Builder for Automated Inspection (VBAI)
  3. Vision acquisition software (SAV)

  You can perform a basic image acquisition, display and record requests with just the drivers included in the Service, but for any transformation or manipulation, you will need VBAI or VDM and more to GO. See this link for these products: what is the difference between software Vision VDM, VBAI and going TO?

  To see your camera in LabVIEW, I recommend using one of the examples to start shopping. In LabVIEW so you navigate to help > find examples > Input and Output material > IMAQ. You will find lots of well documented examples to help you get started. In addition, the 'Vision and Motion' that you have installed are not a Toolbox. It is a collection of functions that move depending on which driver you have installed.

  Thank you and have a nice day.

   

  Esmail Hamdan | Engineering applications. National Instruments

• Log Monitor could not establish connection

  Hi all

  I'm fairly new to FGL and might not be aware, but I have the problem with the file Log Monitor of the cartridge of the Infrastructure.

  I get these types of exceptions and which means of course no data is collected.

  2014 09-24 11:42:13.024 ECHO [Quartz [0] - 5] WARN com.dell.foglight.infrastructure.actions.logmonitor.file.FileLogScanAction - could not execute commands of data collection for the logfile analysis Action [Host =>, HostType = WINDOWS, directory = c:\Quest_Software\Foglight\logs,?] [Filename=ManagementServer_.+\.log (! \.gz)]. She is skipped in this fundraising period.
  com.quest.glue.api.services.RemoteConnectionException: a shell connection could not be established
  to com.quest.glue.core.services.windowscommandshell.WindowsCommandShellServiceImpl.establish(WindowsCommandShellServiceImpl.java:140)...

  I was not able to find a lot of documentation (utility Infrastructure guide) on how the real backlog followed, but it seems to me like she is using WMI or WinRM (Windows hosts) - according to this doc.

  The host has already helped WinRM:
  PS C:\Users\adm_60036967 > winrm quickconfig
  WinRM is already configured to receive requests on this machine.
  WinRM is already configured for the management on this computer.

  But it is still impossible to connect to the host.

  Has anyone seen this problem before?

  How to solve it?

  Thank you

  Just checking if you have powershell, accurate documentation the obligation for the Configuration Windows File Transfer on remote hosts

  Also, look for alerts of credentials, please make sure that you release the credentials of the fglam you do the follow-up of.

  If it still does not work, I recommend you this opening with support as soon as possible

  Golan

• Beginning with BBM

  Hi guys, I am completely new to the Blackberry development and I am now trying to understand works on the last BB10 BBM. I looked through a lot of documentation (webcasts as well) and I noticed that you can do impressive things. A first attempt, I began to focus on a simple task such as the sharing of a link inside my application with peers BBM, but I ran into a couple of issues/concerns.

  My reference SDK is Webworks and, as far as I understand it, the first step is to register the app in the platform... Unfortunately, as soon as it happens, the app will slow down showing the spinner. The code that I have implemented is exactly the same, you can find in the API in Webworks documentation examples:

  https://developer.BlackBerry.com/HTML5/APIs/BlackBerry.BBM.platform.html

  Another point is that I could not find a hook to the API that allows a user to share a link with his contacts, as my original design was designed...

  I am tryng to achieve something which is not provided? What is really when you call "shareContent" as described here: https://developer.blackberry.com/html5/apis/blackberry.bbm.platform.users.html#.shareContent

  ??

  Thank you very much for your time

  See you soon

  -marco

  What behavior you see when you open the customer of the BBM itself say?  Here is a link to a sample of BBM SP for WebWorks.

  Note that you don't have to register first if you use any of the API BBM SP.  However, if you use the framework of the call to call the BBM Client, import into your application as a card that you don't have to register.

  10 BlackBerry BBM SP Sample WebWorks

• Admin Auth LMS with ACS 5.3

  Hey people, I need to integrate LMS4 with ACS 5.x for LMS user auth. 2 roles are necessary, Admin and monitor. Y at - it all Documentation, example Configuration, or other useful information? Any help welcome.

  Best regards, Michael

  Hi Michael,

  Perhaps these threads will give you enough details:

  https://supportforums.Cisco.com/message/3484567

  Best regards

  André