PowerEdgeT320, UEFI and Windows USB drive > 3 GB

Similar Questions

• Excite AT10PE-A-105 - cannot install and use USB driver

  Hello

  I bought the AT10PE-a-105 and I never managed to install the driver for debug applicatoin android with eclipse.

  I use Microsoft 8.1 64 bit (last updated).
  I'm following the available tutrorial (RTFM).

  Even I'm a fan of the home user, I need to root and the USB driver works. I post a bad review on gsm arena.

  Someone was able to use the USB driver?
  [usb driver | http://support.toshiba.com/support/viewContentDetail?contentId=4001813]

  I lose 2 days trying to install the usb driver without success and I give up.

  Material may not be updated compared to the pilot then could developer team Toshiba could do a upgrade from usb?

  Concerning

  + The message was edited: link has been removed not allowed.

  Your excited AT10PE-a-105 was released in the European region and it seems to be the right Android WinUsb driver

  http://support.Toshiba.com/support/viewContentDetail?ContentId=4001725

  The driver has been released for the operating environment
  Windows XP SP3 or later (32-bit Version)
  Windows 7 SP1 or later (32-bit / 64-bit Version)

  8.1 Windows isn t taken in charge and I guess this is the main reason why you can not install the driver on your system.

• Where can I download the A2901A adb interface windows usb driver? Thank you

  Where can I download the A2901A adb interface windows usb driver? Thank you

  There is already a thread about this, try searching for Bad a2109. You should find something useful. You mean the a2109 of ZTE released in us, correct? I think it is a2109f, same thing in the other thread.

• UEFI and Windows 10 licenses

  I have read that with UEFI system, Windows 10 licenses are hardcoded in the UEFI firmware. This means that if I format my drive, wipe my recovery partitions and install 10 Windows from a USB key (assuming that it is not a recovery of my own drive machine, but an image downloaded from Windows written on it) it will be automatically validated and I'll have a legal installation?

  Hello

  If this is the same operating system supplied with the computer, it should work. It will go through a normal installation of Windows without having to request the license key.

• My sm bus controller and controller USB driver not there (read for detailed explanations)

  I have a laptop, it was windows 8.0 and I upgraded to 8.1, I didn't like it at all so I lowered it to win7 because it was laggy and the displayed text was fuzzy. I knew that something was wrong with the installation of windows 8 and even after a clean full format, he would not return to normal. I went and he downgraded because I had enough and know that windows 7 would be faster for this pc (which it was), I said yaay sound much smoother and faster with no problems.  Then I installed all the wifi, bluetooth drivers, mouse etc... only 2 things that I couldn't install was the bus controller SM and USB bus controller driver (USB). And my usb slots were not working other than port 3.0 I had a plugged usb of decommissioning...

  I know its something to do with the bios and since the update of the bios is 8 - 8.1 windows only I don't know what to do... I have a .wim file recovery and I don't know how to use it. I also forgot to put my product key of my pc of win8 before I went down I had no knowledge of what happen and don't think it would be a problem...  Now I can't connect more than 1 thing at a time. I went on the microsoft forums and they fixed a problem (ethernet driver) and told me to come here and I hope you can fix the rest.

  Thanks to adnvaced for your help

  The laptop is HP Pavilion Sleekbook 14-b006au
  Serial number: 5CD2490Y40
  Product number: C7D41PA

  Please can someone help me I really want to stay under windows 7 is it possible that someone could get an update of the bios manual for that laptop or something like that. Except that everything works fine!

  Here's a linnk to MS32 (computers)

  http://1drv.Ms/1u6Z6DP

  Hello:

  Here are links to the drivers you need.

  1 SMBus: Downloand unzip and manually install the driver for smbus controller I have attached under attachments below.

  Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

  2 USB3: Download and install both of these drivers and restart.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_137148_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133037_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Dell Backup and Recovery USB drive

  Recently, I bought an XPS 8700 and running Windows 7 Pro with service pack 1.  I was going on the creation of a backup/recovery disk only to discover, you can't actually create disc and it must be done via a USB flash drive, or in my case, an external hard drive.  I don't care to have my partitioned external HD when I thought I was going on the creation of the recover 'floppy '.  Is it possible to redo on a USB flash drive now?

  Thanks in advance!

  There are several partitions on the hard drive of a laptop including the system partition, the system reserved partition, partitions of data and for some manufacturers like Lenovo, they even create a partition of OneKey recovery on their products. To save partitions much one is really annoying. In this case, you can just do a backup image for all of the hard disc instead of backup of all of the partitions on this disk.see more

  www.Backup-Utility.com/Disk-Backup-Software.html

• WRT610N and compatible usb drives

  Hello

  Has someone managed to get a stable connection to the external hard drive USB on the WRT610N?

  I would use a hard drive enclosure that turns down the drive with a sleep mode for reasons of noise and energy.

  With the latest firmware (1.00.02 B10) I tried:

  Vantech Nexstar 3i with a Seagate 1 TB - works very well until the player will power mode how the router to start up export drive even if the USB is on and the management page shows the drive always connected

  Western Digital My Book essential 1 TB - the router is not even mount the external hard drive.  I tried everything... FAT32, NTFS... waited, plugged the USB in and out, power cycled the router...

  Any help would be appreciated, because I spent countless hours trying to get something to work.

  OK, I finally have a system of USB storage to work with a hard drive that goes to sleep.

  Looks like there's a previous WRT610N that does not have a version 1 on the stamp on the underside of the router.  This router did not work well with my hard drives.  I'm a worm 1 WRT610N and use mounts (1.00.00 B18) F/W, The Western Digital My Book essential 1 TB factory delivered and everything works fine.  On the USB data rates are approximately 2.4 MB/s via wireless with security AES .n and 5 MB/s via ethernet cable.  Funny is that more recent (1.00.02 B10) firmware will not mount drive Western Digital My Book.  Interesting that in the version notes it says «enhanced recognition of USB external hard drives»  Well, at least I'm happy with something that works; 4 weeks and many hours.  Unfortunately, Linksys does no more than F/W on their website, so I'll never upgrade in case I lose the ability to connect to my new hard drive.

• UEFI and Windows 7?

  Recently, I had a (different) Windows 7 machine barf at the restart and discovered that somehow, the BIOS boot model had been changed in the UEFI.  Change back solved the problem, but I ask:

  Is there something to gain on a non Windows-8 machine using a UEFI boot?

  I have an Area-51 computer ALX of office which was built in June-ish 2010.  I don't know if this makes a R3 or an R4.  But I was wondering if there is no reason that I should spend.  Or if it is even possible to do it on this model.

  Thoughts?

  MXOWinterMute

  1. is there something to gain on a non Windows-8 machine using a UEFI boot?

  2. I have an Area-51 computer ALX of office which was built in June-ish 2010.  I don't know if this makes a R3 or an R4.  But I was wondering if there is no reason that I should spend.  Or if it is even possible to do it on this model.

  Thoughts?

   
  1. I don't know definitely but I reached out to an another Rockstar for his thoughts about this.
   
  1B. I can say I've seen a machine capable of UEFI (it's a laptop Dell Precision M6600) available from Dell in the traditional mode. It was running Win7-64 and works very well.
   
  The BIOS settings are RAID (actually mono-disque or disk mode RAID non RAID) and legacy UEFI.
   
  AHCI should also work, but I didn't want to play with her. Even in Legacy Mode, you still get UEFI type BIOS speed post. After clone SSD... cut the start of half (of the power switch, connection and usable desktop) 30 seconds. SATA-3 transfer speeds are crazy fast... 514/401 OPS ARE / S 61177/23950
   
  2 Dell/Alienware (circa 2010) Area-51 is Intel 9xx cpu and x 58 chipset and is not UEFI (Legacy BIOS standard compatible). It's not really same R1 because it there was that a single model ever built so far.

• Tecra A7 and Windows 7 driver (Ati x1600m)

  I was wondering if anyone knows the progress with Windows 7 for the Ati x1600m drivers.
  I think that this VGA chip is used in many laptops Toshiba, but Windows 7 doesn't have native drivers for it or exists on the Toshiba site.

  Unfortunately, your Tecra is not supported for Win7 and Toshiba offers no Win7 drivers for your laptop model.
  I tried to find out if the same graphics card is available in some other notebook models and I can tell you that the same ATI card is available on some models of Satellite/Satellite Pro A100.
  Unfortunately these models do not rest too.

  Boyfriend sorry but I really don't know what to do.

• Satellite A210-14 and Windows 7 - driver issues

  Jyn

  I use the Satellite A210 + 14 years with Vista at the moment, but I want to install the Windows7 in next time.
  But in the list of supported models is not Satellite A210 Series (http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01DE.htm) is there no Driver Support for Windows7 and the series A210, or would the A210 don't run with Windows7?

  I found on the website of some drivers (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU) but I think that these drivers for all the hardware? I've read anything about SDcard touchpad driver or driver chipset drivers...?

  Thanks for your replies

  Sebastian

  Hey Buddy

  Don t worry!
  All you will get for Win 7!

  I installed Win 7 on my A210 and Win 7 recognized most of the devices.
  In addition, I installed the VAP (additional package) for Satellite A300 and installed the support flash Cards out to Satellite L500 utility. The flash card tool is important for the FN keys.

  WLan, LAN and graphics driver have been recognized by Win 7.
  But you can also use the Win 7 driver automatic installation option in the Device Manager, choose the device, and then choose Update driver
  The first option will allow you to search for a driver updates automatically option s nice!

• P P: 2710 2710 and Windows 10 driver support

  Are there plans to make drivers for laptop HP 2710 P compatible for Windows 10 Pro (64-bit)?

  Hello

  I upgraded her cousin (2740) to 10 64-bit Windows (from Windows 7 Professional 64-bit) on the weekend and no problem at all.

  Kind regards.

• Problems pictures copies of Flash memory card and USB drive under Vista 64 files

  Hi, when I insert a flash memory card (SanDisk 8 GB SDHC or SanDisk 2 GB Compact Flash) either by inserting the card into a card reader, AutoPlay comes on but the image transfer stops after a few images have been copied to any program (Windows, Picasa, etc.). I chose to copy the files. Same experience when I connect the camera with the memory card in the camera using the USB cable to the PC. I tried to re - format camera memory cards, but it has no effect.
  Also, I feel the same when I try to copy from a USB flash drive (the drive is basic, not a U3 key).
  I have a HP Pavilion m9400t Elite desktop running Vista Home Premium 64-bit. I own this desktop computer for a year and I've always had this problem. I have no problem using these flash memory cards and a USB drive on my old XP PC or an Apple Mac Book. For what I can tell, my Vista desktop is set for automatic windows and updates from HP. Everything about the plan of updating drivers, etc., which would solve this problem would be appreciated.
  Thank you
  Srini

  Hi Srini,

  one) that you get specific error messages when images are arrested to copy?

  (b) what is the file format of the pictures\files that are not copied? What images are copied with success?

  To narrow the problem, please follow the steps mentioned below:

  O copy the pictures manually on the flash memory card Office.

  O connect the flash memory card\ camera to the back of the computer (for a different USB (port universal serial bus) and try to copy the pictures\files.)

  O check if the photos are in double version:

  Windows detects your newest pictures and doesn't matter the duplicate versions of the old photos that you've already copied to your computer

   

  He may want to know:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv7-7121nr usb driver and sm bus controller

  cannot find pavilion dv7-7121nr sm bus controller and the usb driver

  Hello:

  Is no longer a SMBus Controller driver AMD chipset driver file.

  Here's what you need to do to the smbus controller...

  I have zipped and attached below in attachments, the raw smbus controller driver files to decompress and install manually.

  Download and unzip the file.

  Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• Camcorder Handycam Sony = updated USB driver

  I have

  Hi, I have windows7 and a friend of dcr-dvd653e number sony model handy-cam, the disk that accompanies this pkg included photo and a usb driver, I have download and download on a computer or camera, now I can download only at the camera. I tried to load the disc that came with the camera, but the system said it was not compatible with win7 and there is no Sony USB Driver not found.

  I'd appreciate any help you could give.

  Kind regards

  John Stubbs.

  Sony has written drivers for their products, not Microsoft.

  Check with Sony to your driver problem: http://esupport.sony.com/

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How to create a DVD Bootable UEFI in windows 7/8?

  I'm looking forward to discover the latest UEFI technology on my laptop! If I am able to create the active UEFI-bootable USB key, I'm now focused on the creation of a UEFI boot DVD so that I can store as a recovery media for future use.

  Waiting to meet you... Thanks in advance.

  Setup: Samsung NP350V5C-S02IN with Windows 8 x 64 Pro with the Pack Media Center.

  Best regards, Tardy.

  Hi Pierre,.

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems you want to learn more about the UEFI technology and create a bootable DVD.

  I'll be happy to help you with this.

  Here is the article that gives an overview of the Unified Extensible Firmware Interface (UEFI) technology.

  UEFI and Windows
  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463149.aspx

  If you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.