Tecra A7 and Windows 7 driver (Ati x1600m)

Similar Questions

• No sound with Tecra A9 and Windows 7

  Hello

  I just installed Windows 7 on my Tecra A9 and now: no sound. I ' v installed all the latest drivers but nothing to do: no sound.
  Does anyone have the same problem? And especially have solved?

  Thanks for your help.

  PS: The mute off the coast of the working tools doesn't work with Tecra A9 (is there an update?)

  Hello

  > I've tried the mute off tool, but it is not compatible with Tecra A9
  You need to install the VAP (Toshiba Value Package utility added) before using this tool!

  Check again!

• Tecra M10 and Windows 7 64 - bit - fingerprint reader driver

  Hi all

  I just bought a M10 - 17 H and was updated for Windows 7 64-bit system.
  I used the drivers [posted by Toshiba | http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?].

  Everything was therefore acknowledged properly share the fingerprint reader and a controller PCI of communication Simple.

  I tried the driver provided in the link above (also the uninstall after the driver installation program) useless.
  When windows 7 has been installed (new installation) the drive has not been recognized either.

  I also installed the [driver beta Authentec 64bits | http://www.authentec.com/win7beta64.cfm] yet once anything is.

  Does anyone know about the availability of driver?

  Thank you

  Best regards

  Pedro

  Hello

  Have you tried to use the Vista driver?
  Check it out and try it!

  Most Vista drivers work well with Win 7.

• Tecra P11 and Windows 7 32 bit - cannot load the WiFi

  Hello

  I have a Tecra P11 (PTSE3A-00T00K) which has been loaded with Windows XP, but sold with Windows 7. I have recently reinstalled Windows 7, but could not get WiFi to work. I had downloaded the Intel Wireless LAN driver, but the program doesn't seem to recognize WiFi. Bluetooth monitor and located only ConfigFree Bluetooth function, but can't seem to find the Wireless Lan drivers. The network tab is not present in Device Manager, and network controller is in other devices, but with a lock icon.

  How to make WiFi work?

  Thank you

  Exact specification for laptop is not known to me but as I can see on the download page there is also offered Atheros WLAN driver version 9.2.0.500.0.s3264 (for models Atheros).

  Have you tried to install this driver?

• Re: Tecra A9 and Windows 7 - error print digital 0xe7210005

  Hello

  I installed Windows 7 on my laptop Tecra A9 on a partition with a dual boot (Win XP, Win 7).

  Fingerprinting works fine on Windows XP and not under windows 7. I uninstalled the driver of fingerprints and re-installed but nothing changes. The Protector Suite Software (version 5.8.0.4024) return of UPEK a mistake (0xe7210005) said that he found no fingerprints on this computer.

  Someone has an idea?

  Thanks a lot for your answers.

  Kind regards

  Alain

  Until you have installed the fingerprint software you have installed all drivers as driver chipset, Manager of storage, trusted platform module-module and so on?

• Tecra M5 and Windows Vista?

  We will be able to run windows vista on new Tecra M5?

  Hello

  Firstly, Windows vista is not official on the market, and the Toshiba doesn't support any beta version.
  In this case you can try to install your beta version, but there is no drivers for this operating system at this time. I read that Microsoft plans to release the Vista operating system in 2007.
  Well, you can try to install, but you will get all the drivers.
  I will also try to install a Beta version on another laptop, but he needs about 8 GB of HARD drive.

• Tecra R10 and Windows 7

  Tomorrow, I'll get a Tecra with the following specifications:

  Tecra R10 - 14 d
  Type: Processador Intel® Core 2 com tecnologia vPro AP9400, ligacao of rede e Intel® GS45 Express Intel® WiFi Link 5100
  Watch speed: 2.40 GHz
  FSB: 1066 MHz
  level 2: 6 MB cache
  OS: Windows Vista® Business 32 - bit Edition Genuino (pre-wont, recovering HARD disk Toshiba)

  http://PT.computers.Toshiba-Europe.com/innovation/product/Tecra-R10-14d/1071135/toshibaShop/false

  Thus, it comes with W_Vista. Can I just update it W_7 or not? Do I need a driver or something to do the update?

  Very appreciated for any response.

  Best
  Naim

  When you receive your laptop, as a first step please installation of recovery discs using the preinstalled Toshiba Recovery Disk Creator.
  With other words: start preinstalled Vista and DO NOT install Win7 version clean or something because you lose the ability to create recovery discs. These discs you can use in the future if you want to have once again the factory settings.

  Back to your question:
  Tecra R10 is fully supported for Win7 and you have two options. You can do Win7 upgrade using the Toshiba upgrade kit, or you can install install Win7 clean and clean using the facilities of Microsoft disc. If you take decision clean OS install all drivers, tools and utilities that you can find on Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  To be honest I prefer the new installation of the OS.

• Tecra S1 and Windows XP SP2

  Who can shine a professional light on my problem

  Recovery dvd installed xp on a fresh hard drive.

  then looked to install normal programs, nothing complicated, connected to a network with an IP fixed and checked e-mail and internet communication.

  So, I'm a very happy user who can work and do what I have to do.

  To the message of windos xp sp1 support will be stopped 10/10/2006 you want to upgrade to SP2? Klick here "-message blew my chance!"

  I started the SP2 update in line, waited for about 24 hours! nothing happens?

  I ordered the OFFICIAL microsoft SP2 upgrade cd, he arrived (jib!) and I was happy as a boy... .i started the update of this official cd.

  I waited 48 hours! (just to be safe) and nothing happened, I discovered that everything is going wrong when the update checks the current configuration.

  WHAT should I do to get this working?

  Please, because I downloaded the files suggested all of toshiba, installed them all, but... .he still does NOT work.

  It must be possible, I think I missed it somewere (I'm human, you know)...

  nitro2

  Hi Nitro2,

  Have you updated to Windows for your portable computer from the Microsoft web site? I would suggest thast, the best way to get your system upgraded to SP2 would be to re - set install from the recovery CD, and then run the Windows Update process (once you have set up your connection anti-virus and internet of course). This should ensure that your prior approval of updates required for the SP2 package.

  Kind regards

• PowerEdgeT320, UEFI and Windows USB drive > 3 GB

  PowerEdge T320 running Windows 2008 R2. If I plug in a USB/3 GB key and restart the server, the "starting Windows" appears for a moment and then it stops with an error. Did not a screenshot, but it's something like "UEFI environment of pre-seed error." If I disconnect the USB drive, Windows starts without a problem. How can I get Windows to boot with the USB connected?

  Simon

  Problem solved. I contacted Dell support and they showed me in the right direction. I used the OOTB disk, which apparently isn't a good idea... So I used the Windows Disk Manager to delete the partition or volume off the USB key. Windows creates a "basic disk" and divided into portions of 2 TO Max. Convert the disc "GPT", it creates a large disk. Created new single partition, performed a looong format and after that, the machine boots without error.

  Simon

• Satellite A210-14 and Windows 7 - driver issues

  Jyn

  I use the Satellite A210 + 14 years with Vista at the moment, but I want to install the Windows7 in next time.
  But in the list of supported models is not Satellite A210 Series (http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01DE.htm) is there no Driver Support for Windows7 and the series A210, or would the A210 don't run with Windows7?

  I found on the website of some drivers (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU) but I think that these drivers for all the hardware? I've read anything about SDcard touchpad driver or driver chipset drivers...?

  Thanks for your replies

  Sebastian

  Hey Buddy

  Don t worry!
  All you will get for Win 7!

  I installed Win 7 on my A210 and Win 7 recognized most of the devices.
  In addition, I installed the VAP (additional package) for Satellite A300 and installed the support flash Cards out to Satellite L500 utility. The flash card tool is important for the FN keys.

  WLan, LAN and graphics driver have been recognized by Win 7.
  But you can also use the Win 7 driver automatic installation option in the Device Manager, choose the device, and then choose Update driver
  The first option will allow you to search for a driver updates automatically option s nice!

• P P: 2710 2710 and Windows 10 driver support

  Are there plans to make drivers for laptop HP 2710 P compatible for Windows 10 Pro (64-bit)?

  Hello

  I upgraded her cousin (2740) to 10 64-bit Windows (from Windows 7 Professional 64-bit) on the weekend and no problem at all.

  Kind regards.

• HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

  I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
  I get audio on my speakers ONLY and not the headset.
  I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
  no luck - same behavior.
  
  The only thing that worked was the IDT driver installation and Windows device driver high definition.
  The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).
  
  An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.
  
  I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.
  
  Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)
  
  I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.
  
  Any help would be appreciated. IF not - it is a problem that a person should study.
  

  Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

  I thought about it.

  BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

  V80.05 - did not work properly with this Version of Bios.

  Thank you HP very useful site if you take the time to browse through all the updates.

• Tecra A4 and Win7 - problems with PCMCIA card driver

  I've recently updated my old laptop Tecra A4 - PTA42E - (in great condition however) for Windows 7 and it is now in the best shape ever except for the PCMCIA card. In fact, to have Windows 7 installed I had to rename the pcmcia.sys and pcmcia.inf files during the installation (to .old or .bak) otherwise the new operating system would not start. The same problem has been experienced by many other users Tecra A4 and the solution is available in a number of forums.

  Although I use no more than the PCMCIA card slot, I want to fix this for a reason: If, in the future, I need to re - install Windows 7 for some reason any on this laptop, I have to repeat the same process - rename the pcmcia.sys and pcmcia.inf during installation, in addition, the new operating system does not start.

  I do not understand that the original drivers from the card slot (Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7, but it is there any updated driver that works for windows 7? And if there's a how can I replace the old drivers in my system so that in the event of re - install Windows 7 I will not have to go through the same process? TI site is no help, and Toshiba does not all drivers to download.

  Last but not least, if there is a driver available, I used the card slot for 2 ports USB 2 or 3 additional which are really necessary.

  Thanks to the forum, in advance

  Hello

  The pcmcia.sys and pcmcia.inf files are part of the Windows System.
  This driver isn't provided by laptop manufacturer, but it is a Microsoft internal driver.

  You mentioned that the pilots of the original card slot Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7.

  To my knowledge, this driver does control not the PCMCIA location but this driver controls the card reader that supports the MMC card, SD card, card xd picture card, SM card, Memory Stick and Memory Stick Pro.

  However, the Tecra A4 is very old model of laptop. The driver will not be updated for this camera and it looks like Windows 7 drivers never had to be released the driver Toshiba UE

• Problem Driver ATI 9700 Windows Vista on a P10 792

  I tried Windows Vista beta 5308 in my Toshiba P10-792, and I was unable to get graphics accelartion with Windows Vista Driver for Ati 9700 graphics, which is is built in P10 - 792.
  It displays an error code 43.

  After some research, I found http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=268378&SiteID=1

  Some people suggested to get the last update of the bios for laptop. I've updated to the latest version of the bios, but the problem persists, someone has the same problem?
  Any help would be valuable.

  Thank you

  Hello

  Usually, you use the graphic drivers of Toshiba Toshiba laptops.
  I found the description of the error 34 on this site from Microsoft:
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 310123 #XSLTH3439121122120121120120

  34 error code: Windows cannot determine the settings for this device
  Solution:: the device requires manual configuration

  Well, the fact is that Windows Vista is not official on the market and there is a lot of necessary test. Moreover, Toshiba doesn't utter the graphics driver for Windows Vista at this time. In my opinion, wait for Toshiba graphic driver. I m sure that the original Toshiba graphics drivers will work in the future.

• Driver ATI for A300-15 a acting strange - windows XP

  Hello!

  I got Satellite A300-15 a PSAJ4E with windows XP SP3. I downloaded all the drivers from http://www.toshiba-europe.com/.
  Everything works well except the driver ATI Radeon HD 3650. When I install windows get some strange colors. I.e. welcome letters on the start screen have orange background? The nuances under letters are orange (no matter what theme I use). Links in Firefox are orange or red... it works fine but seems strange...

  The problem is that I can't find any other driver to install. If I download driver driver ati or omega he says it does not support this model. Actually on ati pages there is no drivers for newer than x 1800 mobility Radeon.

  Is there any other driver for download or some other advice?

  Thank you!

  Hi, I also A300 but 15 k with Ati 3470, you need to download the latest drivers from ATI (8.7) web and mod them to this http://www.driverheaven.net/modtool.php tool and then install it, if it will not work that manually choose the INF of unzipped Ati drivers, it works for me...