PowerMac G3, 9.2.2, and inability to format disks/diskettes

Similar Questions

• How to convert Blu Ray Disc of the movie in general video and HD video formats

  How to convert Blu Ray Disc of the movie in general video and HD video formats

  Hello

  I doubt that this is possible because Bluray discs are mostly protected against copying.
  But if you have the Bluray m2ts file on your HARD drive, then you could try the tool called convertXtodvd. But I don't see that the reasons for this
  I mean that you will lose the quality of film converting the blueray to dvd.

• Qosmio G10-133 - Install Qosmio Player and using the recovery disk

  Hi again.

  My g10-133 was the mother of uypgraded installed by Toshiba that there are back and forward in his first year with problems of graphics chip, so they installed the motherboard with the 6200 chip chart.

  Until very recently, I installed Windows XP to one of my dead computers that I've ever had anywhere with my original recovery qosmio disc such that it has been damaged. I recently bought an other G10 as I wanted to replace the keyboard and display and it came with disks,

  I put in a raw player. I used the recovery of the Qosmio player disc, and this indicates that it is complete. I then installed the Toshiba Recovery disk that has Windows MCE on it. (I have now three original copies of the present). But when windows go to start, the computer gets past the Bios and then quickly goes to the blue screen of death... I tried to use break so that I can read this, but it does not work. I tried more than a windows disk, but not joy. I also had special instructions for Toshiba, which has the Qosmio updater on him, and also another drive which has some additional drivers.

  So far, I've tried all sorts and whenever I go to start the laptop, it crashes. The Toshiba recovery disc has two methods that an automatic and a step forward on (which I don't have a clue how to use). The automatic, which does not implement the normal windows installation, but evokes a Toshiba says... and it goes from 0% to 100% and ends each time.

  If I use my Windows XP disk from another pc it install fine. and the laptop is fine until it reaches download Windows SP3, which seems to slow everything down.

  I would like to install the Qosmio to style factory if pos.

  What you need to help your service provider which has replaced the motherboard. A long time ago I heard talking of this and what I know is that the machine must be ready for use: This means service must update the BIOS, verify compatibility of memory, RAID functions are not the same, Bios, EC/KBC and DMI must be updated and rewritten. The laptop owner must be willing to work with new hardware components.

  If I m remembering well this new mainboard has different chipset and recovery image that you are trying to install has really bad drivers inside. With other words: after the Exchange system motherboard drivers and the Qosmio Player require an update.

  You know the whole process is a bit complicated, but, as far as I know, Toshiba service provider must send you instructions for Qosmioplayer update and instructions for the update tool.

  At the moment I can't help you. Please call again and ask for help. If you will not get any help it let us know.

• My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.

  As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.

• Tecra M3: Cannot get the SD memory and utility boot Format to work

  Format SD memory Boot utility does not! (Tecra M3)
  SD memory boot utility and install utility Format Software memory SD fine with no problems. But they both then return an error when you try to start a program.

  Utility boot SD says:
  Unexpected error! 00-52-FF02-126 error code

  SD format utility says:
  Unexpected error! Error code = 0x0034FF02

  After clicking on this message box appears the window of the program, but there is no drive to select. There is an SD card into the SD card reader slot, but still he does not come to the top.

  I run Windows XP pro, office 2003 against Tecra M3.

  Help, please! Do you know of any other (free) software to use the brand so a bootable SD card, or how to fix these errors.

  Hello

  Sorry, but your ad confuses me completely. If you did clean using the delivered OS install why you should install ConfigFree recovery media tool?
  TOSHIBA ConfigFree tool V5.00.48 is undoubtedly part of the recovery image and if you use recovery image you should NOT install anything. On this way unit is completely configured.

  The recovery image contains the operating system, all necessary drivers and Toshiba designed tools and utilities. After the installation procedure and first departure all the pieces of equipment work harmonic if there is no any kind of hardware malfunction.

  Only thing you need to do is to install own application you need for work (office or any what editing application) or games for fun with Notepad.

  If you have another question please write again.

  Good bye

• Satellite A200-1UM - prohibitions of departure and not possible formatting

  Hi all

  At first, I want to apologize if my English is not so well and maybe a little hurt.

  I have a Toshiba Satellite A200-1UM Cristmas 2007 and until now I never had big problems with it, but now, I got a huge.
  Yesterday, when I came back from school, I started first, as always my computer to check my emails, etc..
  At first, all was normal the normal screen appeared: "Toshiba Leading innovations", after the screen with flashing underscore, but after that line... a progress bar appears with text on this subject: "Windows loading files.
  I thought: hm k allow it to load its files...

  Right after loading all seemed to be OK, the next screen came: (C) Microsoft Corp. with the green bar moving on it, normal as...
  But then after that, it became black... nothing more...
  I waited... and waited... and waited, but nothing happened...
  Then I restarted, maybe it would work now, but it happened again the same screen loading and so on... and she went back to black...
  Then I tried to start it in mode (I pressed F5 on the 2nd loading screen)
  I tried all the different options of Save mode, but it still stopeped to drivers\disk.sys... I had like crazy... I tried different options to F5: finally begin the normal version and so forth, but all collapsed at any time... and nothing happened that more...

  I had enough I put on my discovery of product and wanted to format it all... In the first screen, I press F12 and I went CD/DVD (product recovery disc), but this * progress bar appears again and the (C) Microsoft Corp Screen and it still got black * wuhuuuo-.-'*.

  Result-> nothing works at all the... I tried to get aid to some German forums, but they gave the advice that I better should try in this forum, because im actually cause down with my nervs, im on the school in the last year and I NEED my lap top for homework and everything...

  I hope you can help me...

  Better accommodate the of the Germany...

  Hello

  Your question is strange because the bar of progress Windows appears and it would mean that the operating system that is installed on the HARD disk can be booted from the HARD disk.
  And this means that the HARD drive is still in use.

  However, it could be a HARD disk failure.
  As resident suggested, you can check the HARD drive using the HARD drive fitness test.
  He will check the HARD drive, and will show you the status of the HARD drive.

  If everything is OK with your HARD drive, then it must be another malfunction.
  You said that you could not start using the Toshiba recovery disc.
  Maybe you should try another disk bootable as MS original Windows XP CD.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• RE; How can I add a cd rom disk driver to a top of the tower that has no one.and do I have to format disks before I can put them in the driver?

  I just bought a laptop drive for my laptop which do not have. What is the right device? If this is not the case, what camera to buy so I can record information from my computer to a disc, when I don't have a disk driver on my computer. also, I have to do something to the drive first in order to make it work?

  Here are the facts:

  I have an acer aspire one that isn't a disk driver (which would allow me to save my separately from the document, photos and videos).

  I'd like take what I have on my computer and store it on a disk. I thought I would buy a cd rom drive, then I could do it.

  but now that I have this cdrom drive. I'm going to download the document and it keeps saying disk (?), I put a disc Virgin installation cd in and it does not recognize. Do I have to format the drive? and if yes, how do I do that?

  I put in a cd (musci) and it plays very well.

  It records on my computer as drive D.

  IM missing some knowledge. someone can help me.

  I buy the wrong thing?

  What to buy to add to my laptop, so I can transfer my videos, photos and the paper out of my computer and on a disc?

  Thank you

  E-mail address is removed from the privacy *.

  I always use Nero or Roxio software, but Windows XP it has a function limited to do so.  First of all, if you must make sure that the drive you purchased is able to WRITE on the discs.  The vast majority are, but you should check that first.  Normally Windows will find the right driver for the latter and load it, but you can check the Device Manager to see.  XP if the memories are good, you click on Start-> support-> Device Manager.  Locate the entry of CD/DVD.  If there is none? or! next to him, you have the right driver.  Also, if your device came with a driver, it is another indication that you probably don't have something special for her.  Then, you will need to check to see what type of disc you have.  Many external DVD/CD players will read and write CD but not write DVD.  There are CDs CD - r and CD - RW.  CD - RW is to be formatted, but normally you don't format CD - r.  You just need to copy and paste to, click the disk, and then open Windows Explorer, on the drive, and you should see something like a list of files waiting to be burned to a disc.  Should be a button there to burn.

  Now, let me propose an alternative.  An external hard drive is much better for purposes of backup CDs.  You can buy 500 GB for $70, and 1,5 to ones for about $ these days $100.  You can also buy flash drives.  You can get a 16 GB one for $10.  These would be at least 1600 pictures.  You can also buy 32 GB for $20 flash drives.

  I hope this helps.  Good luck.

• Factory installed Windows XP OS on a Dell laptop and have a hard disk crash. How can I reinstall windows when there is no CD?

  Factory installed Windows XP OS on a Dell laptop and have a hard disk crash.  How can I reinstall windows when there is no CD?

  Order Dell backup discs for the specific Dell computer model you have. Carey Frisch

• NAS200 shows "No fromatted" and the use of disk on MAC?

  Hi, I just bought NAS200 it was a bargain for $109 at the Frys.com. I want to do wireless backup with backup large 2-3 to SATA drive. So I bought 1 x 1.5 TB and 1 x 1 TB Seagate barracuda SATA drive. Some how I am so confused to use it with MAC I did different things to operate including firmware update. I case Thermaltake SATA 2 bays and I made the disk of 1 TB in MAC format using disk utility but NAS200 is not recognize it.

  My goal of buying the NAS200 has storage wireless and it is fast and I want to store the files in the way I'm storing in USB drive with journaled MAC OS X file system and do not use FAT or NTFS etc.

  How to access these drives in MAC is also an important issue for me and I did a lot of research on Google and finally came here to better understand things.

  I've read a few articles on the configuration of SMB that is made, but because the disk is not formatted, it has does not work properly.

  Please help me.

  I think that NAS200 support FAT32, NTFS and EXT. If you have formatted your drive using MAC OS, then I think he should have formatted your drive's format of HSF. Now, you must delete the partition HSF type and connect the drive directly to the NAS200 without formatting, then the format of the player using the NAS200.

  Once you configure all the settings on your NAS200 and set the disk, then you must map the drive on your MAC computer using smb.

  How to map a drive in MAC os, click here.

• Catastrophic failure Ox8000FFFF and running out of disk space on FACTORY_IMAGE (d :))

  Whenever I save my files to a disc, it is said that he has been completed successfully, and then later, I get a message that says Ox8000FFFF of catastrophic failure and I am running out of disk space on FACTORY_IMAGE (:)) IM Windows Vista. I'm not a novice in computers, I am a computer expert. When I pull my FACTORY_IMAGE folder, I don't know what are the files, so I'm aftaid of monkey with them. I deleted the old and useless files, but whenever I run the backup, I get the message of Ox8000FFFF of catastrophic failure later. I can only assume that the backup and running out of disk space on FACTORY_IMAGE are related. I've seen corrections on the Net for this problem, but I'm afraid to try them. Any help would be appreciated.

  Hello

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  Should be backups on an external hard drive or DVD; external hard drive preference.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

  EDIT:

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

• I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  Trying to convert to the. WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Question about upgrading windows and replacement of hard disk

  I originally had windows 7 premium 64 bit and later upgraded using a product key anytime upgrade to windows 7 Professional.  I still have the two product keys for the premium and professional.

  I want to replace my hard drive and upgrade to windows 10.

  What I asked:

  I have upgraded to windows 10 first and somehow make a boot disk, replace my hard drive, and then use the disk on the new hard disk?

  Can I get a disk to boot windows professional 7 some hand and use it on the new hard drive and then use the tool of a free upgrade?

  Any suggestion would be great.  Thank you

  You must first reinstall Windows 7 Home Premium, reactivate and then rerun the upgrade to Windows 7 Professional can make sure that it is turned on.

  After which, you can download and install the free update for Windows 10.

  Another option you have is to create an image of your current installation of Windows 7 Professional system and restore it on the new hard drive.

  How to pass Windows 7 to a bigger hard drive - Notebooks.com

  After the restoration of the image and adjust the layout of the partition, make sure that Windows is activated, then check Windows Update for the upgrade of Windows 10 or download manually:

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• How to access a hard drive belonging to another computer, I have a bunch of hard drives and before you format it to use it again, I would like to see what is their. Thank you maldog

  How to access a hard drive belonging to another computer, I have a bunch of hard drives and before you format it to use it again, I would like to see what is their. Thank you maldog

  The easiest way is to use a USB to SATA or IDE USB adapter. (most of the adapters offer both).

  Here is an example
  http://www.Newegg.com/product/product.aspx?item=N82E16812232002

• I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  Just installed windows 7 but I can't read my product key?

  Help me please thx!

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  Brand

  Online order

  Phone

  Acer

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  1-866-539-3901

  ASUS

  http://eStore.ASUS.com/shop

  1-888-678-3688 or

  1-510-739-3777

  Reference Dell

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen

  1-800-624-9896

  eMachines

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=eMachines

  1-866-539-3901

  Entry door

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=gateway 1-866-539-3901

  HP/Compaq

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00810334&LC=en&DLC=en&cc=us&OS=4063&product=4057208

  1-800-474-6836

  Lenovo/IBM

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-4M7HWZ.html

  1-800-426-7378

  Sony

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp

  1-800-488-7669

  Toshiba

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  1-800-457-7777