With the help of CONSUME_CLICK called fieldChanged automatically when setFocus() is called in ButtonField

Similar Questions

• With the help of dynamically called screw in TestStand deployment

  I write code to interface with a & Rohde Schwarz ZNB Network Analyzer.  I use LabVIEW 8.2 and TestStand 3.5.  For reference the ZNB driver is available here: R & S of ZNB Driver.  I use a slightly older version of the driver, some before they needed to LabVIEW 2009.  I am writing all the code on a development machine that has the full version of TestStand/LabVIEW and it works on another machine that has the TestStand deployment license.

  This driver is dynamically linked to some things he needs.  I am able to operate with simple LabVIEW EXEs but not in TestStand deployments.  The following excerpt comes from their documentation, explaining a little about how the driver works and how to use in LabVIEW EXEs.

  3.4.2 How to generate executables or libraries in LabVIEW driver kernel drivers instrument based on attributes is dynamically bound to any VI performed during execution. This can be recognized by the LabVIEW application builder. The LabVIEW application builder follows all the static dependencies and include them in the package distributed at the generation of an executable file.

  To create an executable in LabVIEW, please manually add all the screws in the \PREFIX \_utility\callbacks folder to the LabVIEW project. In the case of project based please add private to your project folder. With this reference manual, the driver core is included in the compilation and the driver core is accessible during execution.

  I can't get this to work in TestStand deployments at all.  I can't even connect to the device since the VI Init has these issues.  I get the same error for all the various attempts that I made.  The same error is that when you add manually the screws for the LabVIEW EXE.

  Error-1073807346

  Property in Rohde & Schwarz Vector Analyzer.lvlib:rsidr_core_session_fgv.vi-> network node

  Rohde & Schwarz Vector Network Analyzer.lvlib:rsidr_core_check_error.vi->

  Rohde & Schwarz Vector Network Analyzer.lvlib:rsidr_core_attribute_write_int.vi->

  Rohde & Schwarz Vector Network Analyzer.lvlib:rsidr_core_attribute.vi:3->

  Rohde & Schwarz Vector Network Analyzer.lvlib:rsvna.vi:2->

  Example 1 setting of the Instrument 24Default .vi:1->

  Rohde & Schwarz Vector Network Analyzer.lvlib-> efault Instrument Setup.vi

  Rohde & Schwarz Vector Network Analyzer.lvlib:Reset.vi->

  Rohde & Schwarz Vector Network Analyzer.lvlib:Initialize.vi->

  Connection of ZNB testing.VI

  VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.

  So far, I tried the following, all solutions producing this same error.  I struggled with this and turned off for awhile then maybe there are other solutions attempts I forget.

  (1) it looked like a lot of the report to go to the private folder were finished in SupportVIs.  I manually pasted the rest there, too.

  (2) I added all driver files on my workspace and included in the files with the rest of my deployed screws.

  (3) I added all driver files on my workspace and said pilot TestStand to deploy them to the original location in Program Files.

  Someone at - it ideas?  R & S didn't even know what was TestStand, so that they could not help me.

  I was finally able to solve this problem on mine, the other day.  I brought the Network Analyzer to my office and did a lot of tests in this way.  Eventually, I discovered that I needed to include the folder private pilot deployment, what I was doing in one of previous attempts.  It turns out that you must also maintain the original of this file directory structure when you include it, otherwise dynamic calls are not looking in the right place.  Once it worked on my PC, I got it on the machine test and worked as well.

• With the help of VM Workstation 8. error when restoring from instant snapshots are not allowed on this virtual machine.

  Hello

  I have takena instant and then try to turn on the machine and get a message:
  "Snapshots are not allowed on this virtual machine!

  When I try to start the snapshot form, I get an error:
  "snapshot restore error, snapshots are not allowed on this virtual machine.

  Can you please help?

  It seems that the configuration (.vmx) file has been deleted (zero byte). I recreated a new you have attached log files. Please replace the file corrupted with VMware Workstation (or at least tab of the virtual machine) closed in order to ensure that the replaced file gets read.

  André

• WITH THE HELP OF SEPARATE OR ONE GROUP WHEN IN PRIMARY KEY CLAUSE

  I WANT A WAY TO EFFECTIVELY PERFORM AGGREGATE FUNCTIONS ON A PARTNER OF THE PARENT TABLE CHILD TABLE AND RETURN ALL THE COLUMNS IN THE PARENT TABLE AND CALCULATED FROM THE CHILD TABLE COLUMNS.
  
  THE PROBLEM IS THAT WHEN I USE GROUP BY ON ALL FIELDS IN THE PARENT, INCLUDING THE PARENT TABLE TABLE, I THINK THAT ORACLE TESTS ALL THE COLUMNS IN THE GROUP BY CLAUSE WHEN IT SHOULD GO HAS THE PRIMARY KEY MAKES ALL IMPLICITLY SEPARATE LINES.
  
  I CREATED TWO TEST TABLES AND RRAN SOME QUERIES TO TEST AT THE SAME TIME.
  
  HERE ARE THE TABLES:
  
  CREATE TABLE A_PARENT_TABLES
  (ACTIVATE THE NUMBER PT_PARENT_TABLE_ID (20.0) NOT NULL,)
  PT_GRP_FEILD1 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD2 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD3 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD4 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD5 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD6 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD7 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD8 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD9 NUMBER (20.0) NOT NULL ACTIVATE.
  ENABLE CONSTRAINT A_PARENT_TABLES_PK PRIMARY KEY (PT_PARENT_TABLE_ID)
  );
  
  CREATE TABLE A_CHILD_TABLES
  (ACTIVATE THE NUMBER CT_CHILD_TABLE_ID (20.0) NOT NULL,)
  CT_PARENT_TABLE NUMBER (20.0) NOT NULL ACTIVATE.
  CT_VALUE_TO_SUM NUMBER (20.0) NOT NULL ACTIVATE.
  ACTIVATE THE CONSTRAINT A_CHILD_TABLES_PK PRIMARY KEY (CT_CHILD_TABLE_ID)
  CONSTRAINT CT_PARENT_TABLE_FK FOREIGN KEY (CT_PARENT_TABLE)
  REFERENCES A_PARENT_TABLES (PT_PARENT_TABLE_ID) ON DELETE CASCADE ALLOW
  );
  
  
  I HAVE INSERTED THEN 20,000 RECORDS IN THE A_PARENT_TABLES TABLE AND 60,000 IN A_CHILD_TABLES (3 FOR EACH PARENT)
  I THEN RAN THE FOLLOWING QUERY:
  
  
  -ALL FIELDS GROUGPED
  SELECT
  PT_PARENT_TABLE_ID,
  PT_GRP_FEILD1,
  PT_GRP_FEILD2,
  PT_GRP_FEILD3,
  PT_GRP_FEILD4,
  PT_GRP_FEILD5,
  PT_GRP_FEILD6,
  PT_GRP_FEILD7,
  PT_GRP_FEILD8,
  PT_GRP_FEILD9,
  SUM (CT_VALUE_TO_SUM) AS SUMED_VALUES
  Of
  A_PARENT_TABLES,
  A_CHILD_TABLES
  WHERE
  PT_PARENT_TABLE_ID = CT_PARENT_TABLE;
  
  GROUP BY
  PT_PARENT_TABLE_ID,
  PT_GRP_FEILD1,
  PT_GRP_FEILD2,
  PT_GRP_FEILD3,
  PT_GRP_FEILD4,
  PT_GRP_FEILD5,
  PT_GRP_FEILD6,
  PT_GRP_FEILD7,
  PT_GRP_FEILD8,
  PT_GRP_FEILD9;
  
  
  At TOOK 2.42 seconds set IN ŒUVRE
  
  
  
  -ONLY GROUPED FIELDS
  SELECT
  PT_PARENT_TABLE_ID,
  SUM (CT_VALUE_TO_SUM) AS SUMED_VALUES
  Of
  A_PARENT_TABLES,
  A_CHILD_TABLES
  WHERE
  PT_PARENT_TABLE_ID = CT_PARENT_TABLE
  GROUP BY
  PT_PARENT_TABLE_ID;
  
  
  At TOOK 0.71 seconds set IN ŒUVRE
  
  
  WHY DOESN'T THE FIRST QUERY ARE REALIZING THAT HAVING PT_PARENT_TABLE_ID (PRIMARY KEY) IN THE GROUP BY CLAUSE MEANS THAT NO OTHER COLUMNS SHOULD BE CHECKED?
  
  HOW CAN I ACHIEVE THE EQUVILENT OF THE FIRST QUERY IN A WAY MORE EFFECTIVE?

  Hello

  As you can see on the plain explain command
  This full table scan done query1 on A_PARENT_TABLES
  query2 done index range scan on A_PARENT_TABLES

  This is one of the reasons why query2 runs faster than the application 1.

  Why complete analysis of table to query1?
  Its because you want in query1 to display other fields present in A_PARENT_TABLES and is not present in the primary index of this table, that is why he must go to the table for the data.

  Hope this helps.
  Concerning
  Anurag Tibrewal.

• Problem with the help of PS on Surface 3 when I attach a HDMI monitor

  PS works fine on my 3 surface. When I attach a HDMI monitor and drag the window of PS to him changes in scale and menus, panels etc. become huge as if I use a monitor very low resolution. Tried to change Windows settings for the size of the characters, but no difference. In this way, it is unusable

  Your surface 3 pro has a 12 "screen that displays 2160 x 1440 pixels and resolution from 216 DPI.  What is your HDMI monitor and pixel how does view it is more likely is a low resolution screen. And if you use CC 2014 2 x UI the image on the screen of Surface 3 pro is used as it has a 108 DPI, image resolution is like its on a screen is 1080x720PX Photoshop double pixel size her two times wider and twice as high.  4 native pixels of Surface 3 pro serve that would be as true on your HDMI display if it has a resolution of 100 dpi, it would be use as it has a resolution of 50DPI.  The image would look huge and and the display would only display 1/4 the amount of information it could display.  Do not use 2xUI...------using Photoshop CC 2014 on a tablet of Windows without a keyboard and a mouse

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• With the help of DirectX 11 with older hardware

  Hello, I have a question about DirectX 11. I have a graphics card that is designed for DirectX 9, I was wondering if DirectX 11 will work at all with my card. From my understanding, fine, but not with the new advanced features that would have a DirectX 11 compatible card. Is this correct? Would be using DirectX 11 with a so-called "not compatible" graphics card slow down performance? Thanks for the info, XPAero

  Features of DirectX 11 works on a DirectX 11 compatible card. But you can use your DirectX 9 card anyway. DX11 is hardware compatible DX9. Although you may miss DX11 performance improvements is to wait. a downturn with the help of an old card, however, would be surprising (not to get improvements is not the same as obtaining a downturn). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• With the help of semaphore with a Global Variable - correct use?

  Hi all

  I looked in the use of global variables and in my case, it seemed with the help of a semaphore is the appropriate solution.

  In my case, I use a global variable to store the State of the system. Asynchronous two with screw environment (same VI) will follow two COM ports to see if they get a ' login:' command prompt. If the COM port is associated with Alpha, Charlie, or Echo, it increments by 1, and if it is associated with the Bravo, Delta, or Foxtrot, is incremented by 2 GV. If the GV is 3, the rest of the code will run. In this case, it must be a port COM A, C or E; the other should be B, D or F.

  A VI parent is called inside a loop. He works for the first loop. He never adds up to 3 on the second loop, however. I can't understand why. Please let me know if my code is a poor use of semaphores, or if there is debugging I can try.

  I'm still relatively new to LV, so I'm sorry if my screws are difficult to read. I created this in LV2011.

  Thanks for any help!

  CelerityEDS wrote:

  The output of my time looping (wait GV = 3) goes to the structure of the case on the bottom right (clear SGS, PasswordEntry, etc.), so the GV get indeed consulted by the upper case structure right.

  ??

  Your right upper case structure does not run until your time ends in a loop.  The while loop does not stop until the total is equal to 3.  Where can increment you the world besides structures case you cannot yet?

  Have you tried in your point culminating execution of the VI in order to see how they are actually running?

  Another problem that I see.  Assuming that your first while the loop is going to end.  In the structures of your case, you lock the semaphore.  But you can never unlock the semaphore unless you have the right combination of conditions that allow you to get to the case that unlocks the semaphore.  The conditions are based on data that are read before the start of the case of structure, which means that data will not be read and changed until it all ends.  You have the timeout of your lock semaphore connected on one of the cases, but your semaphore lock can never timeout because you do not have a value on his entry time-out.  I think you have a situation where you can lock a semaphore, then arrive at a situation where you can not unlock, then wind locking up of your cold code.

  I don't really think that you need a semaphore at all.  I think you can protect reading and writing functional your overall using a global variable, i.e. the motor action.  Overall, I think you need to rethink the architecture of your code.

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• OEBS 12.1.3 purchase request for approval Notification - SOUL with the help of approvals.

  1. We discovered that the version of the SOUL of this notification is generated via a framework of OA.
  2. We have a requirement for the company to add details of the additional topics to the part of the notification.  These fields are not standard for objects of view OA executives Business so an extension of necessary view.
  3. With the help of this and other sites, I was able to extend the view object in the favorite jDeveloper IDE and transfer it to my development OEBS instance.
  4. I see my view extended on the OFA Page, when you look at the content of 'About' from the page.

  My problem is when I try to 'Customize' and add a column of extended view, errors Page OAF that I am trying to come back since the customization session.

  I joined "Personalization_Error_when_adding_new_column_from_OA_Extended_view_object.docx" detailing what I try to run.

  Support of Oracle said that extension of the view OFA is considered a "customization" and that he does not want to help.

  Can anyone advise on what I should look at to solve this error?

  Any feedback/assistance would be greatly appreciated.

  Best regards

  Rich

  The View attribute is referred to as "LAST_UPDATE_DATE". If this is what we call in the SQL query, the attribute of the view object might be different like "LastUpdateDate". Please check back in the XXVO.xml.

  If that has not solved the problem, its running diagnostics by activating the option FND:Diagnostics profile. Then you will get the link 'click here' link on the error page to get the error stack. You can stick the stack of error here.

  Thank you

• With the help of AMPA on non - WS Data Controls

  Hello community MAF .

  I'm developing an Application of MAF that consumes the REST API of WebCenter portal (which is based on the model of HATEOAS).

  I want to make powerful from scratch, including the following:

  -Offline mode (using the SQLite).

  -Persistence, of setting cache and synchronization using AMPA.

  Looks like it's not easier to apply directly on the REST API of WCP AMPA.

  The REST API of WCP is the result of a call of two steps:

  1) authenticate using BASIC authentication against http://Host/repos/api/resourceIndex for the utoken

  (2) use utoken as the URL parameter for the next call of REST for the specific service.

  I know that the Bus Service could be a possibility on the creation of a more simple REST on the WCP REST API, but is not an option right now because that is not easy to map.

  My questions are:

  (1) can we use AMPA on data controls in Java that will call internally to (DB in case of offline mode, REST by program in the case of online mode).

  (2) can define us manually in the persistenceMapping.xml?

  (3) is there anything else more easy to use wizards with HATEOAS base based Services?

  Thanks in advance

  Kind regards.

  Daniel,

  Why is it not service bus an option? You say 'not easy to map', but do the mapping in the MAF makes it not easier, it? the REST API of pressurization is not very easy to mobile, so this transformation to a more usable by using bus service API cost as a good idea for me. See also this article from the A-team.

  Answers to your questions:

  (1) Yes, this is the added value of nucleus of AMPA. You get a service generated the DTC Assistant classes, then you turn this class in a bean data control and use this data control bean for the construction of your user interface. The service class will access local DB and the service REMAINS remote. By default, AMPA will directly show the current data of the local DB, and then in the background call the REST service (online) and refresh the UI, once the REST call has been processed. But this behavior is very configurable and can be changed as you wish.

  (2) Yes, of course, you can manually create data objects, classes of service and persistence mappings, but the wizard is generally much faster.

  (3) HATEOAS logical not for the dynamics of UI where the next action is determined by a link returned in the payload. It is a different model from the static of the UI we build in general with MAF. What is your problem with the help of the wizard of the AMPA?

  Steven Davelaar,

  Oracle Mobile & Cloud A-team.

• with respect to an application to turn with the help of a global static variable

  Hello. I've read a few articles on JavaFX competition, and as a beginner, so I have to practice on this subject. Now, I'm trying to implement a turn-based application which can be played between 3 to 6 players. Furthermore, I use a scene from a .fxml file and I need to update it properly depends on certain calculations of each thread (in other word players). My main problem is, I don't want to use a while loop that checks the status of similar game;

  While (GameState! = State.GAME_OVER) {}

  currentPlayer = GameBoard.getNextPlayer ();

  perform certain actions, calculations, etc.

  }

  So, I want to use threads to work instead while loop. I guess only with the help of the Service used to iterate class and assign the next player will be adapted to instead of using the while loop and the tasks for the calculation of each player, or waiting for a few responses of human players on the UI account, however, I am faced with two problems.

  1. It has a global static variable (like the GameState which is an Enumarator) determines the State of the game, so it should be updated and must be verified by each round. Is it possible to do this?
  2. How can I get rid off this while loop?

  I would like for each answer. Thanks anyway.

  It shouldn't make too much difference. The basic idea is that you have a model class that represents your state of the game (the class of game in example jsmith). When a player makes a move, you update the game state. Because this will result in changes to the user interface, this update must be performed on the Thread of the FX Application.

  If the player makes the passage is a human player, the move would be done by a user action (mouse click or press button, etc.); This will be handled on the FX Application thread in any case.

  When the State of the game changes so it is in an "artificial" player's turn to move, have the object representing the artificial player calculate his next move and then update the game state. Since it is a response to the evolution of the game state (it is the artificial player's turn), it will also be on the Thread of the FX Application.

  The only (slight) complexity comes if the calculation of displacement for the artificial player takes a long time. You don't want to perform this calculation of long duration on the Thread of the FX Application. To handle this, the cleaner is to start a task that computes the desired pass and then updates the status of the game when travel is ready. So, something like this:

  GameState game = ... ;
  // UI is bound to the game state.
  ExecutorService executorService = ... ;
  // ...
  
  final Player currentPlayer = game.getCurrentPlayer() ;
  final Task calculateMoveTask = new Task() {
       @Override
       public Move call() {
            Move move = // compute next move...
            return move ;
       }
  };
  
  calculateMoveTask.setOnSucceeded(new EventHandler() {
       @Override
       public void handle(WorkerStateEvent event) {
            gameState.makeMove(currentPlayer, calculateMoveTask.getValue());
       }
  });
  
  executorService.submit(calculateMoveTask);
  

  If you make a thread more than that, you're probably do badly... Also, there should be no need anything it either, will be held in a "global" static variable (the idea above is the only structural change you the example posted by jsmith).

• Please, do I have with the help of Javascript can change the values of tones? for example my color of nail POLISH with c: 0, m:10, y: 15, k: 0 to change to c: 0, m:0, y: 0, k: 0? Thank you

  Please, I beg you, with the help of Javascript change the values of specific spot color? for example, I have the color called VARNISH with c values: 0, m:10, y: 15 k: 0 and it would help me to change to c: 0, m:0, y: 0, k: 0, in an action. Is this possible? Thank you

  Hello Kon Verter,

  You can change the values in your sample of spot, but you need to check a lot of things before.

  for example, you can do something like this:

  var Vcolor = app.activeDocument.swatches.getByName("Varnish");
  if (Vcolor.color.spot.colorType == ColorModel.SPOT && Vcolor.color.spot.spotKind == SpotColorKind.SPOTCMYK) {
      alert("Black value before: "+Vcolor.color.spot.color.black);
      Vcolor.color.spot.color.black= 0; // and so on
      alert("Black value after: "+Vcolor.color.spot.color.black);
      }
  

  This will change the black value of the task of CMYK color with name Nail Polish 0

  Have fun

• Need the pdf file must be stored directly in the database with the help of jasper

  I use the package of integration of jasper... www.opal-consulting.de
  using apex 4 and am now able to generate the invoice pdf... with the help of jasper and store it in a database... Board.
  
  I need to generate the pdf in the background... without dispalying invoice in my screen...
  Without having to download on my computer... And store directly in the database table.
  *.. *
  
  Is this possible...
  All information is very appreicated.
  
  
  Here is my part existing code... Kindly Guide.
  
  
  DECLARE
  l_blob BLOB;
  l_mime_type VARCHAR2 (100);
  BLOB l_blob2;
  l_mime_type2 VARCHAR2 (100);
  MPort varchar2 (200);
  mrserver varchar2 (20);
  BEGIN
  Warn('fsubdno'||:P103_SUBSCRIBERDNO);
  commit;
  mrserver: = rserver();
  MPort: = ' http://'|| mrserver | ' / JasperReportsIntegration/report ';
  
  
  ------------------------------------------------------------------------
  -generate the report and return to BLOB
  ------------------------------------------------------------------------
  xlib_jasperreports.set_report_url (mport);
  Warn ('firststrikeeee');
  
  xlib_jasperreports.get_report
  (p_rep_name = > 'reinvx',)
  p_rep_format = > "pdf."
  p_data_source = > 'failures. "
  p_rep_locale = > 'de_DE ',.
  p_rep_encoding = > 'UTF - 8',
  p_additional_params = > ' & Psubscribe_no ='. : P103_SUBSCRIBER_NO | ' & Psubscribed_no ='. : P103_SUBSCRIBERDNO,.
  p_out_blob = > l_blob,
  p_out_mime_type = > l_mime_type
  );
  WPG_DOCLOAD.download_file (l_blob);
  Warn ('secondstrikeee');
  
  WPG_DOCLOAD.download_file (l_blob);
  BLOB_LOADB (MID (),: P103_SUBSCRIBER_NO, NULL, 'RENEWAL_INVOICE', 'RENEWALINV' |: P103_SUBSCRIBER_NO, L_MIME_TYPE, L_BLOB);
  ------------------------------------------------------------------------
  -free resources
  ------------------------------------------------------------------------
  DBMS_LOB.freeTemporary (l_blob);
  ------------------------------------------------------------------------
  -judgment of the APEX page
  ------------------------------------------------------------------------
  apex_application.g_unrecoverable_error: = TRUE;
  EXCEPTION
  WHILE OTHERS
  THEN
  xlog (SQLERRM, "PRC_GET_REPORT_TUNNEL", "ERROR");
  LIFT;
  END;
  
  Published by: susf on 16 July 2012 08:47

  Hello

  try to do a procedure from your original like this code:

  procedure make_pdf(p_subscriber_no in number, p_subscriberdno in number)
  is
     l_blob blob;
     l_mime_type varchar2 (100);
     l_blob2 blob;
     l_mime_type2 varchar2 (100);
     mport varchar2(200);
     mrserver varchar2(20);
  begin
     warn('fsubdno'||p_subscriberdno);
     commit;
     mrserver := rserver();
     mport := 'http://'||mrserver||'/jasperreportsintegration/report';
     -- generate the report and return in blob
     xlib_jasperreports.set_report_url (mport);
     warn('firststrikeeee');
  
     xlib_jasperreports.get_report
        (p_rep_name => 'reinvx',
        p_rep_format => 'pdf',
        p_data_source => 'chess',
        p_rep_locale => 'de_de',
        p_rep_encoding => 'utf-8',
        p_additional_params => '&Psubscribe_no='||p_subscriber_no||'&Psubscribed_no='||p_subscriberdno,
        p_out_blob => l_blob,
        p_out_mime_type => l_mime_type
        );
     blob_loadb (mid(),p_subscriber_no,null,'renewal_invoice','renewalinv'||p_subscriber_no,l_mime_type,l_blob);
     -- release resources
     dbms_lob.freetemporary (l_blob);
  exception
     when others
     then
        xlog ('prc_get_report_tunnel', sqlerrm, 'error');
        raise;
  end;
  

  Then, you can call this procedure in a database job that you create with an apex as this process:

  begin
    dbms_scheduler.create_job (
      job_name        => 'make_pdf_job',
      job_type        => 'PLSQL_BLOCK',
      job_action      => 'begin make_pdf(' || :P103_SUBSCRIBER_NO || ',' || :P103_SUBSCRIBERDNO|| ') end;',
      start_date      => systimestamp,
      repeat_interval => null,
      end_date        => null,
      enabled         => true,
      comments        => 'Make pdf job from Apex page 103.');
  end;
  

  Kind regards
  Erik-jan