PowerShot SX160 Date/time Menu resets to zero

Similar Questions

• Last updated time is reset to zero when you post.

  Hello
  
  We now use OWB 11.2.0.2 (actually the same question is here also in 11.0.7.0).
  
  Validation of any workflow changes the last time updated to the date of initial creation + X hours. So if I change a workflow that was originally created for example 2010-01-01 today, save then the date will be today, but if I can validate the workflow then the update lat will be again 2010-01-01 + X hours. The same goes for dimensions. It seems it's the same for maps also.
  
  Is this a bug in OWB? or a problem of configuration on our side? Has anyone noticed in their configurations also?
  
  The problem we have with it, is that we build our releases based on that field for everything that has changed since the last version. But if that date changes then this solution does not work.
  
  BR,
  Jaanus
  
  Published by: Benjamin on March 22, 2011 03:04

  Jaanus,

  Yes, it's a bug, I don't remember the number, but it has already been fixed and will be included in 11.2.0.3 release.

  Thank you
  Dawei

• Vista-the date and time are reset to dec 2007

  Whenever my computer load now, the date and time are reset to dec 2007 and I continue to have this change manually. I am owner of Acer - windows Vista purchased in 2008. Help, please!

  Hello

  This time is normally caused by a battery CMOS failed in the motherboard.

  Time/date settings are preserved after turning off the power when that battery works

  They are a piece of currency-sized battery and cost about $5 to buy.

  "How to replace the battery CMOS.

  http://www.computerhope.com/issues/ch000239.htm

  See you soon.

• Reset the Date/time field

  I have a form I created a Date/time field that automatically fills when open.  I also have a reset button so users can reset the form empty.  I'm trying to figure out how to erase all of the data entered on the form and also to reset the date and time.  I could also have the set button to print the form and then erase all data and reset the date/time field?

  Figured it out.  Just need to set the value to the field calculated - read only and execution property: current Date/time

• Satellite A200 - AH6 PSAE0C: update BIOS - Date & Time Reset problem

  Then I updated my laptop Satellite A200 - AH6 PSAE0C (Bios and graphic update) after installation of Toshiba Power Saver, but from time to time now, if I do a restart, there is a black screen on reboot with some info about my BIOS and some things put in guard/failure.

  Also, when she comes back, once again, every so often, my time is reset to December 2004, 12: 00

  Any suggestions?

  Hmm... This strange s... maybe you should try to update the BIOS again. I'm not sure if this is possible if the BIOS has been already updated to the latest version but it worth a try.
  In addition, you should access the BIOS and it set to the default settings and need to save settings.

  See you soon

• Internal battery / Date/time problem

  My NEX-6 will only keep the date/time information after I put it. He was dead when I got it, but after the normal battery charging to full and using the camera, whenever it is turned off, it forgets the time. I did some research online, which said it may take a while to recharge the internal battery, but I tried to charge for 24 hours straight, and using the camera frequently (as described in the manual) and doesn't seem to solve the problem.

  Once, after leaving unused for a few days, I noticed that he miraculously started saving the date correctly, even when it is off. This lasted about a week, but now he has lost the ability to keep the time again, and with the charge Jack did not set.

  Any thoughts? Apart from sending to Sony to repair?

  I tried the factory reset but that did not work. As I don't have a battery (and don't want to buy a second, in which case it is not the problem), looks like I'll need to come back for the service.

• Item resets to zero after Sup vi works

  Hi all

  I want to use the following code to slowly and continually increase their laser power. The sub vi called scan is the rise, but after there ramp all the say up to the power game, it resets to zero. I spent some time trying to understand how the variable element, the value of the desired final after the rise to power power is finished, but I can't find a way that works. I'm curious if anyone has any suggestions!

  Thank you

  There's your problem, at least the one causing your fall: will continue to set up your index with each iteration entry, but your table within the VI is not so great. Once the index exceeds the size of the table and try to index beyond the end will come out so the default value of zero. To resolve this issue, do you get a Select node that is controlled by your x = y? Boolean result. If True, the "Stop" input value and ignore the indexed value.

  WARNING: This should solve your immediate problem you may have, but in general your code will have likely other issues. There are more effective ways of the ramp of a signal.

• Time string written additional zeros in my text file

  I use the time get/data and format date/time string to write a diary of my time running time to loop, so that my program is running. The problem is the file of text both written in this format: 12:26:13 - 0.000000, where these zeros come and how to remove them? If I plug a meter at the time of exit strring I am not only the time but this is written once, I open the file.

  Assuming that you are viewing the file in Excel, it will choose a display of a date and time field format (not necessarily the format you want).  If you open the file in a text editor, it probably appears like you have already told him to display.

• Date / time setting HP Officejet 4620

  How to set the Date time & for the newspaper on a HP Officejet 4620 Fax?

  Date and time should be correct on the printer, because that's what the fax report reflects.   To change this, you must press the Setup menu (key), then use the arrows to navigate in 'Preferences' and then select the Date and time then tap ok .  Then use the arrows to navigate to the part of the date or time to change (hour/minute), use the number keypad to enter the desired time.

• Date, time and calendar

  Until about a week ago, the settings for date, time and calendar never changed by themselves.  Now I have to reset

  Date and time every morning.  Last week, the calendar jumped before two years.  After you have reset the calendar it

  remained the same until today.  He had jumped another two months.  Why, all of a sudden has this started to happen?

  Check your BIOS settings to make sure that it is set correctly.

• Percentage of system restore does not reset to zero

  I just built a PC W-7 with a SSD system drive and a hard drive for data.  At the end I was tired and selected the wrong drive (the hard drive) in 'System Protection '.  When I noticed my error, I set the SSD system ("restore system settings AND previous versions of files") then returned to the hard drive and set it to OFF ("turn off system protection").  However, I was surprised to discover that the cursor would not be travelling to 0% and stopped at 1%.  Is it possible to force it to 0%?

  Hello

  I tried to repro the issue and found that on each machine, once a system drive has been defined for the restoration of the system, the percentage of system restore minimum (use of the disc) does not reset to zero, even after the removal of all old restore points.

  The reason that I found is that once a system restore is enabled on a system drive, the system volume information folder create some system files that are hidden, which takes a little bit of space in the record, leading to 1% of the disk space.  These files can only be changed or deleted after formatting the disk or change the partition of the system drive to a normal drive.

  My research tells me that there is no way in which we could reset the slide to zero percent, minimum 1%.

• Control Panel date/time missing HP 7510 in settings

  I can't locate date/time for the HP 7510 settings.  Research on the Web suggest that this is an option under the icon key, then Preferences.   I looked and the date/time option is missiong.  Any ideas?  Thank you!

  Hello

  On HP 7510 located under the option date and time

  Menu (wheel) configuration > tools > Date and time

• WinXP, Date / Time independent of Mac OS x?

  I noticed that even with NTP Windows XP disabled, date and time remains synchronized with the OSX clock that causes a problem with the old software I have needs the date before 2005.  I noticed after about 15 to 30 seconds to hit applied to a time specified in the VM of WinXP, date/time sync back with OSX.

  Is it possible to keep in Windows XP virtual machine independent of the clock OSX?

  Thanks in advance.

  VMware Fusion (menu bar) > help > VMware Fusion help > creating virtual machines > VMware Tools > configure VMware Tools

  Uncheck it ' "time synchronization between the virtual machine and the host operating system." " checkbox.

• Date/time is driving me crazy.  How to set the time automatically?

  Okay, okay.  I hope someone can help me here!

  I tried this in Acrobat Pro first, but I don't know Javascript and therefore could not change the script "Call Date" to get the time instead.

  Fortunately, I also have Livecycle and everything looked so simple, BUT it does not work.

  Let me explain what I'm trying to do.  My boss asked me to develop a form of seizure of newspaper where, after the user types an entry and that leaves the field then the time of entry is automatically saved.  This field should be read-only.

  I created a text field (to act as the journal entry form field).  I then created a Date/time field.  I went to the link and he changed time.  I changed the value read-only and then the model of hh: mm A.

  Implement the action when the user leaves the text field, the value in the DateTime field is inserted automatically.

  It works great EXCEPT that I only have the DATE!  I tried protected ReadOnly (calculated) etc.  This requires a script to be called... the very thing that I wanted to avoid because I can't code.  Duration worked a little - in the PDF itself, when the user leaves the text, the date AND time field appears, but if you click this field, the time is updated.  I don't want to not be updated.  My boss wants to see the time that the log entry was completed if it is not editable by the user or set to date.

  I hope I'm clear as to what I need.  Can anyone help?  Hope so!

  Thank you-

  -carrie

  1. Open my form in the designer.
  2. Highlight a field that gets locked.
  3. In the script editor (above the form design, but below the menu items) in the upper left is a drop-down list labeled Show. This is a list box that displays all the events taken in charge this object. Anything that has the code will have an asterisk next to it. In our case, th eexit event will have code. Choose the exit event and the code will appear in the script window.
  4. Highlight all of the code including the fi and endif statements (do not choose the 1st line having form1. #subform...). Copy this code to the Clipboard
  5. Now, open your form. To change the default language to FormCalc instead of Javascript
  6. Under form th Ted/Properties/menu Deafults in the middle of the screen to ensure that the default language is set to FormCalc and not Javascript and make sure that the default run to a customer value (on by default)
  7. I guess you do something similar where you have a field and time of newspaper next to her.
  8. Make sure each field and the corresponding time Journal game field has a unique name.
  9. Now kighlight the 1st field you want to lock.
  10. In the script editor, choose the exit event (as we did before)
  11. Place the cursor after the 1st line in the script editor and paste the code located in the Clipboard in the script editor.
  12. Now, we need to edit the script to point to your object names. I pasted a version of the code below... .teh part in red is the name of my item... .you need to edit it to point to your object names. She's.

  If ($.rawValue <> null) then

  Log1.RawValue

  = Num2Time (Time (), 'HH')

  .access $

  = "readOnly".

  endif

• Extended metadata date / time shift

  Up for it seems that Lightroom 3 can only enter a new date / time for the Meta data creation / change / change the values. Or it can change the weather not 1 hour to fix timezone problems whitin has set +/-range.

  Now imagine all that I have image files from different cameras on the same event and the internal time of the device is not the same to any camera, medium, for example a camera time is 20 minutes late (-20 min) compared to another device. Of course, so I could enter a time for the moment of creation in lightroom directly. But I should do for 300 images?

  I need a function extended the date / time modified:

  It should be possible to make a change of the batch of pictures of +/-hh to adapt the images from a camera (which had a bad interal time setting) to real-time or at least an hour from another device (of course you need to know the difference in time between the hours of the camera).

  Such a function is properly provided by the software bit EXIFTool - but it isn't pleasant manage files outside of Lightroom image comes to alter time. And Lightroom already has a function for this - but its possibilities are not good enough.

  Please implement this as soon as possible.

  Best regards

  Jochen

  If you type "change the capture time" on the Help menu, you'll find this:

  If more than one photo is selected in the grid, Lightroom changes the capture time for the active photo of the specified adjustment. (The active photo is presented as a preview in the Edit Capture time dialog box.) Other photos of the selection are adjusted by the same amount of time. If more than one photo is selected in the Filmstrip in Loupe mode, comparison, or investigation, the capture time is changed only on the active photo.

  This should answer your question.