Time string written additional zeros in my text file

Similar Questions

• How to concatenate strings with the lines of a text file

  Hello
  I tried concatenate strings with the lines of a text file, but something is wrong with my code and I belive is the agruments I use in the cycle for. If anyone can help me I will appreciate it very much.
  My code is:
  [code]@echo off
  the value "input=C:\Users\123\Desktop\List.txt".
  for /f "usebackq tokens = *" % in (' input % ') do)
  the value 'str1 = C:\some directory\ ".
  the value ' str2 = %% ~ F '.
  the value "str3 = .pdf".
  the value "str4 = str1% str2% str3%.
  echo.%STR4%
  ) [/ code]
  and the text file is something like:
  121122 [code]
  122233
  123344
  124455 [/ code]
  But I get only one wrong answer and I have to run it like 3 times to get a real result and it is a mistake, the first two are empty spaces and gives the third one as the last line of the text file but repeated n times, where n is the number of lines in the text file.
  Result:
  [code] C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\Users\123\Desktop>[/code]
  So if anyone has an idea about what is wrong please let me know.
  Concerning
  -Victor-

  Hi Victor,

  This forum is dedicated to the support of the Office of consumer Windows (fonts, colors, personal settings).  Since your question is about programming and usually outside the context of most of the customers, I suggest you post your question in the forums as http://msdn.microsoft.com - the Microsoft network to users will be more adapted to help you in your quest.

• Add strings at the end of the text file... Run Run Pinocchio

  The Write() and Writeln() seem to copy more old content when it is called. Can I just add the text to the last insertion position in a text file? I could just pop the string into an array and write the table in the file, but I prefer a direct means to do so.

  Thanks for any help,

  KUD

  The modes are in the File.open ('a') logon options

• need to adapt the string values when writing to a text file

  Hello

  I have problem by lining up all of the data in wise coloumn. the output is (see attachment). I'm trying to solve this problem, but seems to be difficult. help please...

  
  

• Error 1 has occurred to writing to text file

  Hey there!

  I tried to write a VI that takes some steps to some specific period of time and then save it in a text file. But I get an error indicating that the input parameter is not valid in writing to a text file. This always happens in the second round of the loop. I've attached screenshots.

  Thanks in advance.

  You close the file at the end of the loop and you never open it again.  Move the close file outside of the loop (after him).

• How can I correct D 0 and 0 get replaced by 0D 0a in the written text file?

  Hello

  I'm using LabVIEW 2009. As I am currently using LabVIEW for my diploma, I'd appreciate any help on my problem. So here's my problem:

  The VI I wrote it constantly reads data out of a VISA Serial Port and the string obtained is saved in a text via "writing text file.vi" file (The "write to the binary" produces additional data (for the most part, 00 s) I don't want to have in my data.) But when I open the text file and try to analyze the data that each instance of 0a or 0D is replaced by 0D 0. If the data is already 0D 0 what would not be affected.

  Does anyone have a solution for this problem?

  Thank you for taking the time to read my question...

  What happens if you do a right click of the 'writing on a text file' and uncheck the box "convert EOL?

• date/time string tabs

  Hello!

  I have a problem with the date/time string format VI. I would like to define the date and time with a tab to see the date and time in different columns so when I opened the data written in excellent... but I can´t! I ve tried with \t in the bar code backslash... (% d/%b\t%H:%M:%S%2u), also with concatenate strings with a constant of the tab in the middle... (as illustrated in attached piece) but the extent of my file the tab written as \09 (14/May\0911:00:20.25) s. The strange thing is that when I use \s (space code) it works fine... Why does only not with the tabs?

  Thank you very much for your answers!

  Hi Mia,.

  as I have LV8 + at the moment I can't dig deep - can someone else check this Express VI (stay away from them )

  You can use simple 'write in the text file' calls instead, just use 'picture to a worksheet string' on your data. That's what I'd do... (Express screws are nice start using LabView or quickly write code running - but they hide all the interesting stuff and won't provide any flexibility for special needs!) And they always need conversion into "dynamic data", which also hides the user's information. Did I mention I don't like screws Express?)

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• Not able to read the text file several times - Bug?

  I open the Refnum to a text file by starting my software and I'll keep the file open until the software works. I read a text file when an event occurs. The problem that I'm facing here is when I read that the file 1st time Lily can't read the text of the file but when I read it to get even empty string only. Could someone help me understand why this happens.

  

  A race condition?  What's with the two readings at the same time?  Keep the opened file is not a problem, but remember that there is a file pointer.  If you read empty strings, it's probably because you're at the end of the file.  Use Set leader VI to set Position is for the beginning of the file.

• text file convert array of strings

  I tried to convert the text into an array of strings. But this is not successful.

  text file:

  SD, 1,2,3,4

  GD, 3,4,5,6

  I use the string of worksheet to the Array function, but all THE characters became zero.

  my result:

  0,1,2,3,4

  0,3,4,5,6

  Hi Hieu,

  try this way:

  

  When you want an array of strings that you will need to provide the constant corresponding to the lower left entry of the "chain of worksheet to the table..."

• Adding a 'today' date and time string

  Is it possible to insert a 'live' date/time string and have it appear on several pages.  Have tried to do this without success, I am confident, that it must be possible.

  Hope that I live long enough to really get my mind around all benefits of Dove.

  Thank you

  Grandpa70

  Hello

  You use CP4? Then, it's really simple:

  • Insert a text caption
  • Add to this the caption text system variables

    $$cpInfoCurrentDateString$ $ and

    $$cpInfoCurrentTime$ $

  • in the properties of the text caption, Options, choose "display for the rest of the project.

  The date and time added will be those of the system on the PC (so they must be good values

  Lilybiri

• I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

  I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

  What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
  e '.

  example of extractedb.txt information:

  [email protected]

  [email protected]

  [email protected]

  * has a random number of emails as well *.

  I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

  Any help would be great = D

  Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

  game of mf to ((path to the folder as text) & "mail_list.txt")

  the value mf_List to {}

  the value sel_addr to {}

  the value mf_List to paragraphs of (read file mf)

  the value sel_addr to (choose from the list mf_List with title ¬

  ('Mail list' with multiple selections allowed without empty selection allowed)

  If sel_addr is equal to false then

  Error number-128

  return

  end if

  If length of sel_addr is equal to 1 then

  sel_addr display dialog box as text

  on the other

  the value Point to the text of TID to AppleScript delimiters

  the value Point text in AppleScript return delimiters

  display the dialog box elements of sel_addr in the text

  the value Text of point AppleScript delimiters to TID

  end if

  return

• Is there an easy way to get a Date/time string seconds?

  I have 2 strings of the format depending on whether I would like to convert in seconds (since 1900). I need this value to set the t0 in a field.

  Date: ' 30/06/2014 '.

  "Time: '16:06 ' 08."

  Is there a CVI function that will do this conversion for me? If not, is there an easy way to do it?

  Thank you!

  This code should do what you want:

  
  
  
  static time_t  calt;
  
  struct Shared  tm tm;
  
  public static char    msg [64];
  
  public static int     AA, mm, DD, hh, mn ss;
  
  strcpy (msg, ' 2014/06/30 16:06:08 ');
  Extract the date/time string component
  
  Scan (msg, "%d [x] %d [x] %d [x] %d [x] [x] %d %d", & mm, dd, and yy, & hh, & mn, &ss);)
  Transfer to a struct tm components
  
  TM.tm_hour = hh;
  
  TM.tm_min  = mn;
  
  TM.tm_sec  = ss;
  
  TM.tm_year = yy - 1900;
  
  TM.tm_mon  = mm - 1;
  
  TM.tm_mday = dd;
  Obrtain calendar
  
  CALT = 0;
  
  CALT = mktime (&tm);)
  
  

• Reading text file takes a long time after the first time

  Dear experts LabVIEW,

  I'm having a problem with playback of text file. I'm reading only each Nth line from a file to preview with this sub vi:

  

  I seems to work the first time I do it well. The loop takes almost no time to perform an iteration.

  Then when I load the same file with exactly the same parameters an iteration takes about 50ms.

  Subsequent attempts always seem to take longer execution time.

  Only when I restart the calling vi fast for a single file.

  When executing the sub vi alone it is still fast, but I don't see how the main vi (too complex to post here) could hinder the execution of the Sub vi.

  I have no one else to open the file in the main vi, I do not use too much memory...

  Just now I have not now where to look. Does anyone have an idea?

  Concerning

  Florian

  
  

• How to open all the text files in a folder at a time so that they cross my VI in good order and the VI should only be run once per file?

  Hello

  I am currently looking to browse hundreds of text files my VI to run the VI once and having labview to open each text file in the order numberical that are contained in a single folder.

  In general, I ran each file one at a time through the VI, hours to browse all text files. I'm wondering if there is a way I can specify a target folder and then open each text file in the target folder and walked through my VI in numberical order (each file is located in the order that is MM_01, MM_02, MM_03...). Currently I open a file at the same time, through "the spreadsheet read", then the index table, and then run through filters etc to get the data I need. I hope there is a way to do it, because he will save days of work.

  Thanks in advance for your help.