PPC and impdp help

Similar Questions

• Help EXPDP and IMPDP

  Hey guys
  I'm fairly new to using expdp and impdp and I was wondering if anyone knew a solution to my problem. I am currently using expdp in parallel mode, which creates several DMP files. Now, when I use impdp, I use the following code:
  
  Impdp stglsr/stglsr@tintdb tables = CTDA0FIL_CDC CONTENT = ALL = LSR_DQA_REPORTS dumpfile = CTDA0FIL_CDC_01.dmp directory, CTDA0FIL_CDC_02.dmp logfile = CTDA0FIL_CDC_IMP.log
  
  As you can see I'm going into each of the files to be imported. As it will be run by someone else and I can't guarantee the export will produce the number of files, is it possible to just import all the files associated with an export particular rather than to specify the files to be imported individually.
  
  
  -Below is an example of my export:
  
  expdp stglsr/stglsr@tintdb parfile = ctca0fil_export.par
  
  
  -By file:
  
  TABLES = CTCA0FIL_CDC
  DUMPFILE=CTCA0FIL_CDC_%U.dmp
  CONTENT = ALL
  DIRECTORY = LSR_DQA_REPORTS
  LOGFILE = CTCA0FIL_CDC.log
  PARALLEL = 4
  QUERY = CTCA0FIL_CDC: ' where ETL_STATUS = 'E "".
  JOB_NAME = CTCA0FIL_EXP_JOB
  
  If anyone can help I would be very grateful.
  
  Thank you
  Simon

  [email protected] wrote:
  Here's the import statement as I'm now using:

  Impdp stglsr/stglsr@tintdb tables = CTDA0FIL_CDC CONTENT = directory = LSR_DQA_REPORTS dumpfile=CTDA0FIL_CDC_U%.dmp logfile = CTDA0FIL_CDC_IMP.log ALL

  But when I start using it, it says:

  ORA-39001: invalid argument value
  ORA-39000: bad dump file specification
  ORA-39124: dump file name 'CTDA0FIL_CDC_U%.dmp' contains invalid substitution variable

  Thank you
  Simon

  Its you and not U % %.

• Full expdp and impdp: one db to another

  Hello! Nice day!
  
  I would like to ask for any help with my problem.
  
  I would like to create a full database export and import them to a different database. This data base 2 are on separate computers.
  I try to use the expdp and impdp tool for this task. However, I experienced some problems during the import task.
  
  Here are the details of my problems:
  
  When I try to impdp the dump file, it seems that I was not able to import data and metadata to the user.
  
  Here is the exact command that I used during the import and export of task:
  
  Export (Server n ° 1)
  
  expdp user01 / * directory = ora3_dir full = y dumpfile=db_full%U.dmp filesize = parallel 2 logfile = db_full.log G = 4
  
  import (Server #2)
  Impdp user01 / * directory = ora3_dir dumpfile=db_full%U.dmp full = y log = db_full.log sqlfile = db_full.sql estimate = parallel blocks = 4
  
  Here is the log that was generated during the impdp runs:
  
  ;;;
  Import: Release 10.2.0.1.0 - 64 bit Production on Friday, 27 November 2009 17:41:07
  
  Copyright (c) 2003, 2005, Oracle. All rights reserved.
  ;;;
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
  With partitioning, OLAP and Data Mining options
  Table main "PGDS. "' SYS_SQL_FILE_FULL_01 ' properly load/unloaded
  Departure "PGDS. ' SYS_SQL_FILE_FULL_01 ': PGDS / * directory = ora3_dir dumpfile=ssmpdb_full%U.dmp full = y logfile = ssmpdb_full.log sqlfile = ssmpdb_full.sql.
  Object DATABASE_EXPORT/TABLESPACE of treatment type
  Type of object DATABASE_EXPORT/PROFILE of treatment
  Treatment of DATABASE_EXPORT/SYS_USER/USER object type
  Treatment of DATABASE_EXPORT/SCHEMA/USER object type
  Type of object DATABASE_EXPORT/ROLE of treatment
  Treatment of type of object DATABASE_EXPORT, GRANT, SYSTEM_GRANT, PROC_SYSTEM_GRANT
  DATABASE_EXPORT/SCHEMA/SCHOLARSHIP/SYSTEM_GRANT processing object type
  DATABASE_EXPORT/SCHEMA/ROLE_GRANT processing object type
  DATABASE_EXPORT/SCHEMA/DEFAULT_ROLE processing object type
  DATABASE_EXPORT/SCHEMA/TABLESPACE_QUOTA processing object type
  DATABASE_EXPORT/RESOURCE_COST processing object type
  Treatment of DATABASE_EXPORT/SCHEMA/DB_LINK object type
  DATABASE_EXPORT/TRUSTED_DB_LINK processing object type
  DATABASE_EXPORT/PATTERN/SEQUENCE/SEQUENCE processing object type
  Treatment of type of object DATABASE_EXPORT/PATTERN/SEQUENCE/EXCHANGE/OWNER_GRANT/OBJECT_GRANT
  DATABASE_EXPORT/DIRECTORY/DIRECTORY of processing object type
  Treatment of type of object DATABASE_EXPORT/DIRECTORY/EXCHANGE/OWNER_GRANT/OBJECT_GRANT
  Treatment of type of object DATABASE_EXPORT/DIRECTORY/EXCHANGE/CROSS_SCHEMA/OBJECT_GRANT
  Type of object DATABASE_EXPORT/CONTEXT of transformation
  Object DATABASE_EXPORT/SCHEMA/PUBLIC_SYNONYM/SYNONYM of treatment type
  Object DATABASE_EXPORT/SCHEMA/SYNONYM of treatment type
  DATABASE_EXPORT/SCHEMA/TYPE/TYPE_SPEC processing object type
  Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, PRE_SYSTEM_ACTIONS, PROCACT_SYSTEM
  Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, POST_SYSTEM_ACTIONS, PROCACT_SYSTEM
  DATABASE_EXPORT/SCHEMA/PROCACT_SCHEMA processing object type
  DATABASE_EXPORT/SCHEMA/TABLE/TABLE processing object type
  Treatment of type of object DATABASE_EXPORT, SCHEMA, TABLE, PRE_TABLE_ACTION
  Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
  Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/SCHOLARSHIP/CROSS_SCHEMA/OBJECT_GRANT
  Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/INDEX/INDEX
  DATABASE_EXPORT/SCHEMA/TABLE/CONSTRAINT processing object type
  Object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment
  DATABASE_EXPORT/SCHEMA/TABLE/COMMENT processing object type
  DATABASE_EXPORT/SCHEMA/PACKAGE/PACKAGE_SPEC processing object type
  Treatment of type of object DATABASE_EXPORT/SCHEMA/PACKAGE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
  DATABASE_EXPORT/SCHEMA/FEATURE/FUNCTION processing object type
  Treatment of type of object DATABASE_EXPORT/SCHEMA/FUNCTION/GRANT/OWNER_GRANT/OBJECT_GRANT
  DATABASE_EXPORT/DIAGRAM/PROCEDURE/PROCEDURE processing object type
  Treatment of type of object DATABASE_EXPORT/DIAGRAM/PROCEDURE/GRANT/OWNER_GRANT/OBJECT_GRANT
  DATABASE_EXPORT/SCHEMA/FUNCTION/ALTER_FUNCTION processing object type
  DATABASE_EXPORT/DIAGRAM/PROCEDURE/ALTER_PROCEDURE processing object type
  DATABASE_EXPORT/SCHEMA/VIEW/VIEW processing object type
  Treatment of type of object DATABASE_EXPORT/SCHEMA/VIEW/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
  Treatment of type of object DATABASE_EXPORT/SCHEMA/VIEW/SCHOLARSHIP/CROSS_SCHEMA/OBJECT_GRANT
  DATABASE_EXPORT/SCHEMA/VIEW/COMMENT processing object type
  Type of object DATABASE_EXPORT/SCHEMA/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment
  Type of object DATABASE_EXPORT/SCHEMA/PACKAGE_BODIES/PACKAGE/PACKAGE_BODY of treatment
  DATABASE_EXPORT/SCHEMA/TYPE/TYPE_BODY processing object type
  Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
  Treatment of object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
  Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/STATISTICS/TABLE_STATISTICS.
  Treatment of type of object DATABASE_EXPORT, SCHEMA, TABLE, POST_TABLE_ACTION
  DATABASE_EXPORT/SCHEMA/TABLE/TRIGGER processing object type
  DATABASE_EXPORT/SCHEMA/VIEW/TRIGGER processing object type
  Treatment of object DATABASE_EXPORT/PATTERN/JOB type
  Object DATABASE_EXPORT/SCHEMA/DIMENSION of treatment type
  Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/POST_INSTANCE/PROCACT_INSTANCE
  Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/POST_INSTANCE/PROCDEPOBJ
  Treatment of type of object DATABASE_EXPORT, DIAGRAM, POST_SCHEMA, PROCOBJ
  Treatment of type of object DATABASE_EXPORT, DIAGRAM, POST_SCHEMA, PROCACT_SCHEMA
  Job 'PGDS. "" SYS_SQL_FILE_FULL_01 "led to 17:43:09
  
  Thank you in advance.

  The good news is that your dumpfile seems fine. It has metadata and data.

  I looked through your impdp command and found your problem. You have added the sqlfile parameter. This indicates datapump to create a file that can be run from sqlplus. In fact, it is not objects. It also excludes data because data could get pretty ugly in a sqlfile.

  Here's your impdp command:

  Impdp user01 / * directory = ora3_dir dumpfile=db_full%U.dmp full = y log = db_full.log sqlfile = db_full.sql...

  Just remove the

  sqlFile = db_full. SQL

  After you run your first job, you will have a file named db_full.sql that has all the inside create statements. After you remove the sqlfile parameter, your import will work.

  Dean

• need advice on expdp and impdp

  I have a database on server win of oracle 10g.
  I installed a newserver on oracle 11g in GNU / linux.
  Now I would like to clone the data old server to the new server.
  I think expdp and impdp is the best option.
  
  If so, what would be the maximum amount of data that I can cope?
  its better to do it in shema shema or database data?
  
  help me guys

  If you have SQL Developer, on the Tools menu, there is an option to copy the database. It will not be an easy one.

• Why then download a clip is not clear, some of the writing, it is not clear how can a solution this? Thank you very much for your time and your help on this issue.

  Video playback that I just downloaded in my VLC it don't watch not clear enough to read Instructions, how can I make it clear to be able to read the Instructions? I thank very you much for your time and your help.

  It could be that the music is bad. It could be your software.

  Download the latest VLC Player.
  Post a public link to the clip.

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• I've updated to firefox 35.0 and cannot verify add ons are updated a few laps, I tried refreshing firefox and no help

  I can not check to add updates. the juice of the small guard spinning arrow. tried to update firefox and no help. any ideas.

  I just ran the update of the plugin, no problem.

  Start Firefox in Safe Mode {web link} by holding down the < SHIFT (Mac Options) > key and then from Firefox. Is always the problem?

  Go to the web page. Once the page loads, mouse to the address bar
  and left click the icon. A window to display information of site should
  developed. Select more information. Now select permissions. In the
  menu, find the plugins and set all the of them for Allow.
  This action will have an effect only as a single site.

• My iPhone 6 won't accept that the first digit of my password. I tried to force restart and no help?

  iPhone 6, I can only enter a number for the password. Tried to force the reboot and no help. Cannot access my phone. I can send text on the phone and calling on the phone.

  ???

  Assuming that you are talking about the access code, take a look at this Apple Support article:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• iCloud want to remove my iphone 5 but I can't not leave me with my e-mail password and need help

  iCloud want to remove my iphone 5 but I can't not leave me with my e-mail password and need help

  Welcome to the Apple community.

  If you don't remember the password, reset it to...

  iForgot.com

• Get help to use local help and support Help Center for XP sp3

  Help and support center does not open, msg says help and support service does not work, but check indicates it is enabled, but error msg says 1083, the program does not work?

  To get ideas that are not a wild-goose chase or a waste of your time, you should try to post the exact error messages you see and not paraphrase them.

  For example, you see a message like this?

  Windows cannot open help and Support because a system service is not ongoing enforcement.
  To resolve this problem, start the service named 'help and Support '.

  As long as the Service is not disabled (it can be manual or automatic), if it is not executed, it should start automatically as you open the help and Support Center.   It doesn't have to be set to automatic to work.

  You have checked and your help and support is not disabled, no?  If it is disabled, you will surely get that message, so it must be either manual or automatic.

  Where and how you see this message 1083 and what the program that does not work?  I don't understand that part at all if you need clarify the part.

  In addition, since the MS Answers forum still does not prompt for any information system when a new question is asked, you would be better served by answering a few questions:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the help and support used to work, what do you think might have changed since the last time it worked correctly?

  You have now or have you ever used third-party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost, boost, gum, muncher. one click fix, new, intuitive, errors, stop crashes, stop errors, improves, saves you money, risk free, guaranteed or any third-party program that has an icon that looks like a gear, pinion, key, key, whirling arrow or screwdriver?

• Open windows help (HTML) and Windows Help and support of the 100... each program file, I opened

  Original title: help and Support.

  Open windows help (HTML) and Windows Help and support of the 100... each program file, I open... I disabled the assistance and support of windows, it did not stop... PL, help me...

  I once formatted the c drive, but it did not stop... It consumes the pagefile (util) and more problem occure... Please help me!

  Hello

  Step 1: Search for the issue in the clean boot state.

  Step 2: Online virus and malware scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:

  Using the event viewer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• I bought ADobe Acrobat XI Standard previously. My computer has been changed and I have lost the need to reinstall. Were unsuccessfule and need help

  I bought Adobe Acrobat XI Standard previously. My computer has been changed and I have lost the need to reinstall. Have failed and need help. My serial number does not work.

  Hi Dean,

  Please refer to the KB Doc:https://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

  Kind regards
  Rave

• Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

  Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

  Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

• Ordinary Expdp GR 11, 2 DB and Impdp to RAC 11 GR 2

  Hello

  I'll have to expdp single database Instance 11.2.0.3 and Impdp to 11.2.0.4 CARS two database nodes.

  Do you know the guy a link with a good material for the research, I can follow as a tutorial?

  One thing I know that it is good to optimize execution is implemented table_exists_action = replace.

  Do you know other things that I have to perform in order to have a good performance?

  Thank you

  KZ

  consider of PARALLEL and the PARALLEL_EXECUTION_MESSAGE_SIZE parameter.

  validation constraints

  check the permissions and directory size

  Read also: data pump Performance

  HTH

  Tobi

• Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  800-833-6687 (the only one from 05:00 - 19:00 PST, Monday to Friday day US).

  Phone support | Orders, returns, exchanges
  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• I need assistance in the import of certain vectors, watercolor color chart and other creative market (step by step instructions).  Im a newbie to Illustrator and need help.

  I need assistance in the import of certain vectors, watercolor color chart and other creative market (step by step instructions).  Im a newbie to Illustrator and need help.

  Should be the subject of the file > open.  After the download.  The swatches will come with the file.