PPPoE works do not on a bridge-CSR1000V

Similar Questions

• I have a problem with the touchscreen doesn't work is not on the bridge zx4971g after performing a factory restore.

  Original title: I have a model zx4971g gateway after a reset of my touch is missing. I downloaded touchpack 7 he says I have no touchpoints on my computer, I did before factory reset do - what I'm doing.

  I have a model zx4971g gateway after a reset of my touch went I downloaded touchpack 7 it says I have no points of contact on my computer, idid before my factory reset.

  You will need to reinstall it from scratch. Factory reset is there for this... reset the computer to the way it came out of the factory. You need to reinstall all programs.

• Access to the network bridge works do not (Linux host & comments)

  I am running VMware Player 3.0.1 on Fedora Core 10. (I know this is not one of the host of the OS supported; could this be the problem?)

  I built a virtual machine with a virtual adapter connected by a bridge and am under Fedora Core 10 also in the virtual machine. The virtual machine does not have any network access.

  I followed all the advice of troubleshooting to the Knowledge Base article 1008367 (at http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1008367 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 77717080 & stateId = 0% 200% 2077715760) does not.

  On the Linux host, vmnet-bridge is running.

  / dev/vmnet0, / dev/vmnet1 and/dev/vmnet8 all exist.

  However, the Configuration GUI network (under GNOME) lists vmnet1 material devices, vmnet8, eth0 (it's my actual physical network interface), and the so-called pan0.

  On the virtual machine, I think I have configured the network correctly.

  ping an address on my LAN IP said "the network is inaccessible." (The same ping succeeds on the host).

  Clues to understand why the network access doesn't work?

  Ok

  Start by checking that the Fedora 10 vNIC is connected on the audit: VM configuration-> network adapter Bridge-> Connect at power on (must be verified).

  So when the guest of Fedora 10 begins the vNIC should be upward.

  If the eth0 is not upward, you should be able to install and configure then. You can search on the net how to set up the network on a host of Fedora 10. I recommend that you use just the console text to do so.

  Don't forget to configure fedora network depending on the configuration of your LAN (static or dhcp).

  Let me know if it works or not

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Sharing works do not Internet connection

  OK im trying to make my computer vista laptop wireless for my xbox 360 and im struggling to try to leave Internet connection sharing when I go to propities and go to the sharing, I have the box that says allow other network users to connect through this computer's internet connection I click on it and click ok , then it opens with an error message indicating an error occurred while the connection was activated and it does never time I try and select it ive tried something different and looked online and can't find someone with the same problem or answers as to the difficulty that I even tried bridging the connections and it did not work im not sure if its because of my computer is connected to a router im trying to use my computer and wireless ICS were like this, it will only work if it was connected to the local network

  Hi rhawley64,

  Thanks for posting on the Microsoft answers Forums.

  Have you tried to connect your XBOX to your computer via a wired connection?

  1. first of all, have turned on your Xbox. Also have your PC on, because this next part is everything with the computer. It will probably work with a wired connection as well (but you could probably just hang to the top your modem or router then), but here it is. First go to start and go to your control panel. Switch to Classic view using the link in the upper left corner of the window. Find the network connections and open it.

  2. you should see a "connect to the Local network' (or disconnected, it's to connect to the Xbox) and your internet connection (mine is called"Wireless network connection"). Connect the Ethernet cable to your laptop and the back of the 360. Select the 'connection to the Local network. After it is connected, turn off your internet connection. Once it is disable right-click the internet connection, and then click Properties. Go to the Advanced tab and check "allow other users of the network to connect through this computer's internet connection". Allow that this ends, it may take a little bit. Once this is done, your internet connection should say shared next to the State of the connection.

  3. check your internet connection. Once it is fully connected, right-click to 'connect to the Local network' and click on repair. Allow only at the end. On your Xbox, find the system control panel and browse until you find 'connection to Xbox Live Test. Test the connection. If it works, congratulations, you don't need this next part. For some, at this stage, they get a DNS error. There are a number of ways to solve this problem.

  4. you must have a connection to a router. To browse the internet once again, you must disable the "connect to the Local network' and then to repair the Internet connection (follow the steps above to activate it again once you have finished). Go to http://192.168.0.1. You will be asked for a connection. On most routers, this is:

  User name: admin

  Password: (no password)

  If this does not work, look for the login information for your model of router. Once connected, you have to find where your server DNS IPs would be listed. On the top bar, click State. Under WAN, you should find DNS IPs. Manually enter them into your Xbox (rather than have it find automatically) and test your connection again. At this stage it should work. Any other error can be search online.

  After following the steps above you have established a wireless via your computer with your Xbox?

  Please post back and let us know if this information was useful to solve your problem or not, so that we can help you if necessary.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't get Dr. Browns Image Processor Pro to work with Photoshop CC 2014 bridge

  We use the DR Browns wonderful Pro Processor Image script much, but cannot make it work with PS CC 2014 bridge. When I select files in Bridge CC, then go to tools > Dr. Browns Services 2.3.1 > Image Processor Pro it appears an error message that says ReferenceError: photoshop is undefined.

  The real script works fine if I run it from Photoshop CC 2014 - just not so I load it from bridge CC.

  I uninstalled it and re installed a few times, both manually and through the CC of the extensions Manager.

  I use a 64-bit Windows 7 computer.

  I guess that there are a few changes in the part of the script that loads Photoshop of the bridge, but not course. It worked fine in CC. Simply not CC 2014.

  I open the Dr Browns Services .jsx file but don't see anything obvious. This is the section on the Image Processor Pro part:

  //-----------------------------------------------------------------
    // This routine takes an array of files. If called by Photoshop,
    // it will invoke Dr. Brown's Process 1-2-3 with the files. If called by
    // any other app, it will send a BridgeTalk message to Photoshop
    // to invoke this routine with the same arguments.
    //-----------------------------------------------------------------
  drbrownserv.process123 = function (files) {
  // Bring Photoshop to the foreground.
    BridgeTalk.bringToFront ("photoshop");
  
    // Create a new BridgeTalk message for Photoshop to invoke
    // Image Processor with the selected files
    var btMessage = new BridgeTalk;
  btMessage.target = "photoshop";
    btMessage.body = "drbrownserv.process123 (" + files.toSource () + ");";
    btMessage.send ();
    } else {
  photoshop.runActionCommand ('611736f0-9c46-11e0-aa82-0800200c9a66', files);
        }
    }
    catch (error) {
    if (error.number != 8007) // Don't report user cancelled errors.
    drbrownserv.alert (error);
    }
    }
  

  Nevermind - Dr. Browns Services works very well with CC 2014. I just had a lot of trouble with the upgrade... After uninstalling any version of PS and bridge, reboot and reinstall just CC 2014 everything works as it should. I had trouble with the upgrade by 2014 CC on both computers I use - but re-installing fixed everything and was easier to do that I thought it would be.

• JJUJ of printing works is not for Iphone 5 s

  I have 5 16GB iPhone after upgrading to IOS 10 to present JJUJ of printing works do not, now I have IOS 10.0.2 still not workng I need ide solution.

  Hello

  Go to settings touch id remove fingerprint and then add impressions back again.

  See you soon

  Brian

• Searching for pictures of iOS 10 works is not as expected

  I have updated to a couple of my iOS devices (iPhone 6 and iPad Air) iOS 10, actually 10.1 public beta 1 now, but find the results obtained in the search of my library of ~ 5000 photos and videos quite modest.

  I very rarely get the images I'm looking for, if any.

  For example, 'find my photos from the Netherlands' Returns none so I have 122 in my library.

  The research of the city of Delft (that is the Netherlands) returns a single result, which, ironically, shows a screen indicating the word "Delft" on a local train.

  I wonder if there is the possibility of re-indexing of the library or the device can be done on a Macintosh, but I'm afraid user ios do not have such a luxury for now.

  In my troubleshooting process I spent from Italian to English, since this might be a reason for poor search results. But things have not changed.

  Of course, if I ask "Find my photos of the mountains" (or dogs by the way) I get decent results this image recognition works though, not much luck with geotags.

  Any idea?

  / P

  Wow!

  The answer to this question of mine has been overwhelming... (I'm kidding)

  In the meantime, FYI Apple has released the iOS 10.0.2 update that solves the problem of geotags.

  I can now find my photos from the low countries (or Switzerland or India also) and get the correct results.

  Nice

  / P

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Firefox doesn't work does not correctly on Windows 10

  Well, I've upgraded to Windows 10 and since then, Firefox is not working properly (not not display graphics, google sites won't load do not, etc.), I tried uninstalling and reinstalling several times, I even waited for the new update... None of them worked. I read something about security certificates, saying I had to import them to Firefox, but the certificate that he mentioned did not exist in my computer. I have also disabled hardware acceleration, cleared my cache, even deleted my profile from my computer, all to nothing does not. It is sad to see the attached screen. (A text-only screen saying: "Firefox + Windows 10.) Perfect set")

  I hope you guys can resolve this problem as soon as possible. If this is happening to me, it happens to a lot of people.

  Did you secure yourself certificate errors? If Yes, do you use Avast, BitDefender, ESET or Kaspersky?

  If you do, we can give specific suggestions.*

  If this is not the case, a further 10 Windows users questions are report is that they were added to a family and their Firefox has been the subject of parental controls that causes seemingly random crashes. Try to turn off the parental control of Microsoft (or are not part of a family): http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings

  * For Avast, you can disable the part numerical analysis of Web Shield. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

• WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  Try to do these steps, it should help:

  1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.

  2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.

  3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.

  4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.

  5. return to the home screen and open whatsapp.

  6. go in the settings, press Whatsapp and turn back.

  7. open whatsapp again. It should work now.

• WhatsApp works do not on iphone6 9.3.2

  WhatsApp works do not on iphone6 9.3.2

  Pls help me

• functions of YouTube works do not (such as adding to the playlist comment)

  Hello.
  functions of YouTube works do not (such as adding to the playlist comment) has stopped working, they are still working for the same account on chrome or another browser. (when it happened I didn't update or downgrade programs, addons, plugins that run in firefox or chrome, I don't see why all of a sudden).
  so I can't like videos, I get the message 'feature not available try later', can't add videos to the playlist (whole playlist including fav, as: Watch more later playlist pre made by youtube) and can't comment, for these 2 functions, I get the message 'invalid request '.
  all this happen again and many times, they stop or I can't make it work with reboot, refresh, try again.
  I did a fresh install of firefox and all it's the addons, plugins, same installation fees of adobe and divx, vlc products (which have the plugins or addons in firefox)
  After installing I could like comment add to playlist, before the snap all the addons, but I could only play HTML5 in youtube, any video that had no HTML5 support required at adobe. (after that I installed adobe it worked until I restarted the browser).
  now it does not work yet. (to disable, uninstall all the addons, plugins does not affect the problem)

  Some issues may also occur because of ProxTube - at least, I realized that I was was instantly redirected to the first film in the playlist on youtube - having no chance to see the entire playlist. It works when I disabled ProxTube.

• Leader: Open Recent works do not. It appears as recent File: Open: clear all.

  Leader: Open Recent works do not. It appears as recent File: Open: clear all.

  Hi guy,

  Maybe a recent system update has reset your system preferences > General > recent items to zero.

  

  Type a number (for example, 10);

  Quit the system preferences;

  Leave the Pages then revive Pages;

  Open some documents to repopulate open the recent item.

  Any improvement?

  If no improvement, shut down your computer and restart.

  "Recent articles" are at the level of the system and refers to other applications, not just the Pages.

  Kind regards

  Ian.

• Adobe flash player not working does not or does not appear as an application under Tools, options

  Adobe flash player not working does not or does not appear as an application under Tools, options

  If you can't Flash 11.3 to work and need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe
  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

• Is it possible to automatically check all bookmarks, then remove the works do not bookmarks

  Is it possible to check automatic all bookmarks and remove the works do not bookmarks

  Try this extension:

  • CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/