Practices of bad installer in 2016

Similar Questions

• Practice good/bad workaround or does it not matter...?

  Hello

  I have a project that requires some shared actions to hide. / show something and needed a quick fix to hide 1 9 show I've done as follows... (keep in mind, I use CP7 not 8)

  I copied my slide show 20 of hide1 from another project, that maintains the connection between the buttons and images etc, but because it was too much for my other project, I just put things on the slide not copied displlay output etc and then renamed those I wan to designate in the new project and everything works fine However, if wer do this is this bad practice as any other editor CP further down the track, a need to modify the project, might think it is a mess and mish mash with ttoo much (well hidden) object in the slide and may make it more difficult for them.

  My initial thoughts on which is while it can look a bit of a waste, my approach to any existing project is to deconstruct to see exactly what is happening, but a few others could just look at it as a real pain. (I did this way that I couldn't change a shared in CP7 action)

  So, I was just wäntig to ask this question to the community and get feedback on your thoughts on this approach...? (I hope I have explained this properly and is understandable, etc.)

  See you soon

  Sabine

  Each shared action exists also as model in the drop-down list that begins with white in the advanced Actions dialog box. I'll make a copy of the description of the action and its parameters, because you have to reenter those.

  Open the template that you want to change. You will have to fill in the parameters (no matter what) and can make changes. Then save it again as a shared action. The biggest problem is that you need to refill all the descriptions.

  The file size is only a problem for the raw file, never for the published file. And from my experience, I know that using a common action repeatedly to replace the double tip action lets you save on the size of the file. More shared stocks have descriptions, that is not the case for advanced actions. I used to add some text containers in the work area to have a description of the variables and advanced actions.

• Qosmio X 500-10T - poor Microphone or bad installation?

  Im trying to work out if the built-in microphone is really as bad as it sounds in my Qosmio X 500-10T, or if by default the system for what it is bad.

  I'm a gritty thud while listening to a recording, compared to my other computer laptop microphone, which was close to perfect as I've ever heard in a laptop.

  Yes, me too. I even rolled back audio drivers but still get a buzz and even at levels of maximum mic input, I get a signal low record... However, I use a zoom external m4 with stereo microphones for my card to record serious and that works fine but want to use inside also...

  I think its an internal problem as the x 500 features a fan who goes all the time and a microphone is a simple tool... Must be a conflict of groundings that I imagine so really than no solution I think.

• How do you properly remove and reinstall the hp 3210xi printer software in Vista after a bad installation?

  It is a repost to seek expert assistance from HP last week.

  Product: hp 3210xi printer.

  Operating system: Vista 64-bit.

  Errors: Several, especially related to the missing .msi TrayApp, status and DocProc files.  Some of them are on other Windows logon are call center solutions HP or by selecting the scan function.

  Changes: Do not change when the errors using the started HP Solution Center, probably after an update or install, but could not have used quite close to associate the change.  Print function has always worked without error and the analysis function is used less frequently.  Have tried repeatedly during the uninstalling and reinstalling.  Have used the System Mechanic to try to erase the registry HP errors reported.  Have seen some HP Solution Center errors before but have always been able to reinstall to remove.

  Problem: Cannot connect to Windows without error.  Cannot start HP Solution Center without errors.  The HP solutions Center opens and functions, but the text is missing.  Can't scan from the center of solutions without errors, but tests eventually work.

  Hi JohnZNC,

  There are a set of "scrubbers" that appear in your installation directory, which can carry out varying amounts of clean-ups/uninstall.

  The deepest is a "uninstall L4' and and is launched by exectuing the 'Uninstall_L4_64.bat' file (double click should suffice).

  These files are in the subdirectory '\util\ccc', is usually found in c:\program Imaging\ of Hewlett-Packard...

  Find the "Uninstall_L4_64.bat" file, then double-click on it to get the course of cleaning.

  Hope this helps

• Bad installation file for Momentics IDE 2.1.1

  Hello

  I just downloaded Momentics IDE for Linux 32 b 2.1.1 and I got this message after you run the binary file:

  cz7asm@cz7asm-Z97-D3h $./momentics-2.1.1-201411071638.linux.x86.run ~/Downloads
  Please enter accept, n otherwise: y
  Create the directory bbndk
  Check the integrity of archive... Error in MD5 checksums: b6b5bd01544bdc98dd85bed1156758d3 is different from 592d0acf58e00adc38048da163a1d9a3

  Now, it's very strange because I have donwloaded the file twice and the checksum remains the same. I suspect that there is a bug in the installation process. Also list of MD5 checksum on the website (http://downloads.blackberry.com/upr/developers/downloads/momentics-2.1.1-201411071638.cksum) does not show the MD5 sums:

  361730190 417369444./momentics-2.1.1-201411071638.linux.x86.run
  3117348421 401787406./momentics-2.1.1-201411071638.linux.x86_64.run
  1678733117 400627721./momentics-2.1.1-201411071638.macosx.x86_64.dmg
  4011323815 402781301./momentics-2.1.1-201411071638.win32.x86.setup.exe
  3082028438 387674552./momentics-2.1.1-201411071638.win32.x86_64.setup.exe

  Of course, there is only the sizes of different generations.

  Could someone give me some comments on this? I couldn't find any contact for people behind releasing Momentics IDE using this forum was the only option I could think.

  Thanks for any help.

  Petr

  The question of the checksum must also be fixed right now as well.  Give him another try and let me know if you still have problems.

• Bad installation Office 365

  I am running Windows 7 Professional on a HP desktop computer.

  I ran the installation of Office 365 and everything is installed has been OneDrive.

  Now, he tells me I have installed no more left. It was my second, first went to my laptop.

  This can be corrected?

  Hi David,

  Please run the underside to secure it from Microsoft. It will remove completely all 365 existing office file. After uninstallation is completed, restart the pc and then re install office 365.

  http://go.Microsoft.com/?linkid=9815935

• How to remove a bad installation of my laptop recovery Partition Win7

  I messed up by trying a "clean install" Win7 (on top of my Acer Vista laptop existing) by installation first on the laptop Acer recovery Partition and then try to correct the mistake by another facility on a data partition (in the hope that the installer would be smart enough to remove the previous installation - it was not!).  I was perplexed because under Vista, installing Windows has always been on C:, and the Acer recovery Partition was on D:.  When Win7 installer prompted me which drive to install on the first time, it offered me Acer C: and D: data, I place the reversal, so I just opted for C: and then found he had installed next to the Acer software, so somehow, disk partitions appear to have been involved.

  The net result is now I have two installations of Win7 and a dual boot black screen that gives me the choice to start at startup.

  Is there a way I can uninstall Win7 since the Recovery of Acer partition (preferably keeping the Acer software stored there, as I want to reinstall some of them later)?

  I burn the software Acer on a DVD, and then format the recovery partition.  You will have to boot from the Windows 7 DVD to format the partition, Windows can sometimes be a bit psychotic, but this isn't sucidal.  You are unable to format a partition with an operating system installed on it.  When you burned the DVD with the Acer software, start from the Win7 DVD, choose custom installation and once the two partitions are visible, choose delete the recovery partition, and then re-create.  Once done and back in Win7, you can then copy the back Acer DVD software.

  You will also need to change the boot loader, right-click on my computer, choose Properties.  On the next screen, select advanced system settings, and then click the Advanced tab and startup and recovery.  Remove the o/s is no longer needed.

• On the new version of Flash Player 13.0.0.214 to decompress Installer mac got bad Installer name

  Hi, I downloaded the 13.0.0.214 flash player from this page: ersions http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html#main_Archived_v. Has , I downloaded the Installer 'flashplayer13_0r0_182_mac.dmg' , the name of the installer for mac is 13.0.0.182 instead of 13.0.0.214. Also, I unzipped and looked inside the Info.plist file and noticed that the version is 13.0.0.214. May I ask if Adobe coined the name of the installer incorrectly? Is the installation program itself (the content of this installer) safe to use to reach the 13.0.0.214 version?

  Moreover, the time I downloaded this installer is at 13/05/2014 11:40.

  

  Hi team_ocd,

  It seems that the file were named incorrectly (the actual files were the correct version).  I fixed the names of files and posted an updated zip file.

  --

  Maria

• Best practices for the installation of 10 GbE

  I have a new HP DL380G7 who has 4 cards on 1 G and 2 10 network interface cards.

  This will run VSphere 4.1 esxi

  I'm looking for some advice on what would be a good network for this server configuration.

  The storage will be NFS goes to a NAS Server

  I tried to create 2 vswitch one with one of the NICs embedded for the service console and the other switch was a team of the 10G env.

  Support Vmware told me that in this configuration, I had to make sure that the service console was on a different subnet from the kernel NFS or NFS traffic will try to go on the service console port.

  I tried this config but as soon as I add a Vkernel to the 2nd switch I am not out ping.

  So I thought I'd post here with what would be a best practice configuration for this server.

  In the first configuration, it is difficult to say which interface will be used for NFS traffic.  Therefore, it is not a recommended configuration.

  The second configuration must be correct.

• HP Officejet Pro 8600 e: 8600e printer driver a bad installation of hp_io_enabler_compound.kext

  I recently did a clean install of Yosemite. I write under "OS unknown because the drop down menu stops at OS 10.8 so I couldn't choose Yosemite.

  I have a printer HP 8600e.

  There is a recurring message that says "the hp_io_enabler_compound.kext of the Extension of the system has been successfully installed and can not be used. This happens constantly, regardless of case I try to print.

  I followed the suggestions of other threads to uninstall the software, reset the printer drivers in the system preferences.

  Download the software from the HP site, install, problem persists

  I tried to repair fsck - fy in secure safe.

  I tried to delete the file, but when restarted, it is replaced, and returns the message.

  This condidion is currently doing anything on the boring computer because it is constantly interrupted by this message.

  Need help. Please suggest not all the things I've done.

  Hello

  In the error message, you will see that the exact path got the hp_io_enabler_compound.kext.

  Go to this place and set "hp_io_enabler_compound.kext" to the trash, then empty the trash, and then reinstall the software below:

  http://FTP.HP.com/pub/softlib/software12/COL51752/OJ-125213-3/HP-inkjet-SW-OSX-Mavericks_v12.34.37.dmg

  Please let me know the results, which should identify such an error.

  Shlomi

• An IO error occurred during the installation of a file. This is normally caused by bad installation media or a damaged Setup file.

  Hi all

  I have a sony vaio notebook - and I installed windows 8 pro 64 bit in there. I get this error when installing my drivers I downloaded from sony's official website. Can someone help me please...

  Satya,

  Thanks for the reply. I suggest to check if you have waiting for update of Windows, including optional updates, if so, install.

• Linux and oracle database installation best practices windows

  can anyone recommend the guide of best practices for the installation/design of windows/Linux oracle database servers.

  Microsoft, sql Server, provide a number of useful resources on the evolution of the default parameters that can die of hunger the operating system of resources, where to and where not to store the data in files/logs etc etc, but I've yet to find a similar guide for Oracle. Research on best practices during the installation/initial design in order to avoid the risk of recovery/redundancy later on any line, reliability, availability, performance. Guidance most welcome.

  See following note metalink on system requirements for the different versions:

  (Doc ID 169706.1) - database Oracle (RDBMS) Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix OS Installation and Configuration requirements checklist (8.0.5 to 11.2)

  Online Oracle Database Documentation 11g Release 2 (11.2)

  -Som

• During the installation of Service PAck TWO VIsta 64 my count failed

  I was able to get the computer up, but I am woundering if should attempt the installation again. Can my external drive USB caused the bad installation?

  Hi majinc,

  Welcome and thank you for viewing on the Microsoft Answers community forum.

  It's the sound section and multimedia Forum. I offered the job to the relevant section (IE Windows updates) so that you can get specific help.

  However, I mentioned below is the link that will give you information about how to go about installing SP2 for Windows vista.

  Windows Vista Service Pack 2 Deployment Guide

  http://TechNet.Microsoft.com/en-us/library/dd335037 (WS.10) .aspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008

  http://support.Microsoft.com/default.aspx/KB/948465

  Please try these and keep us updated on the status.

  Take care.

  Kind regards

  Cedric M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error occurred during the installation of the device, a service in the INF installation section is not valid with Sansa Fuze player

  Media player 11 fails to connect to my sansa fuze player. A second computer find the fuse in sansa without problem. Default media player 11 , I get the following message: error occurred during the instalation of the device, an installtion of service section in the INF is invalid.  I have two players from sansa and both not on this media 11 computer system, but both work on a second computer with media player 9 ? Is the problem, a bad installation of the media 11 on the first computer system, should remove and reinstall media 11 If I delete what is happening in the music on this computer file. Carl L_942

  Hi, Carl L_942,.

  Connect the Sansa Fuze and put into MSC mode. This enabled the majority of users with this problem. Check if it helps you too.

  For more information, see:

  Activation or forcing MSC mode on the Sansa player

  Additional reference on:

  Check and change the device to the master or the MTP USB mode

  The only problem with Media Player 11 and Sansa device is the synchronization of album art to the device.

  For more information, see:

  File Readme for Windows Media Player 11 for Windows XP

  Kind regards

  Divya R - Microsoft technical support.

• This installation package could not be opened get access denied

  I tried this and it says: "System 5 error has occurred.
  Access denied. "
  I'm having problems with OpenOffice.
  zetuskid

  Separated from this thread that the original thread was resolved.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/this-installation-package-could-not-be-opened/40c3cf33-B155-4dc7-B21E-ca5acce105f3?TM=1299513523564

  A less high-tech solution possible:

  Uninstall OpenOffice > re-install OpenOffide.
  You may have a bad installation of openOffice.
  Here is the link to download OpenOffice:
  http://download.OpenOffice.org/