HP Officejet Pro 8600 e: 8600e printer driver a bad installation of hp_io_enabler_compound.kext

Similar Questions

• OfficeJet Pro 8600: Uninstalled the printer driver and now can not download it from the Web site!

  The error message "printer is off-line" showed a day all of a sudden

  I tried to download the driver of scanning and printing doctor as suggested help forum, never downloaded.

  The download (or Install) window presented with percentage bar.

  but the percentage remains at 0% for 10 minutes.

  I thought that something was wrong with the Scan Doctor

  I decided to take the alternative; uninstall the current printer driver in my computer (computer laptop HP 'Pavilion', Windows8).

  I uninstalled it then tried to download the same driver on the HP site.

  It is same as the pilot of scanning and printing doctor;

  same window, "0% download" forever.

  Now, I'm totally at a loss. Have what wrong I done?  How can I make my printer work again or how do I know what is the problem?

  The driver is big enough, I would say save to disk, and then run the installation program.  You could do a right click on the link here, select "Save as", then download the file.  Depending on your internet speed, it make take some time downloading.  If it doesn't for you please specify exactly what is happening when you try to download the file, and any error messages see you.

• my hp officejet pro 8600 won't print from my ipad.

  my hp officejet pro 8600 won't print from my ipad. ?

  Hello

  Yes.  Try following the instructions here http://support.hp.com/us-en/document/c02623193
  If this does not help, let me know and I'll see what I can do.

• OfficeJet Pro 8600 Plus duplex printing does not

  I am on Mac OSX leopard (10.5.8) and just purchased the officejet pro 8600.  Everything seems to work fine except that I can't understand how to print on both sides.  The option is not allowed in the layout

  

  I checked the settings of the printer and you don't see anything to indicate how to enable the duplex printing option.

  Thanks in advance for the help.

  Hello

  Please follow the steps below to configure the automatic duplex print driver:

  1. check that duplex printing accessory has been installed correctly. To check this open system preferences and go to Print & Fax. Open the print to your printer queue. Click Printer Setup and in the tab menu choose driver. Make sure that the box next to HP printing accessory (duplexer) sides.

  2. on the file menu, select print. The print window is displayed.
  NOTE: The print window might be minimized. Click the blue triangle next to the printer name to see all available parameters.

  3. in the print window expanded you will find next to Copies the checkbox for duplex. Select the check box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  4. to select the connection type click the selection box below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  5. Select the menu drop down.

  6. set the duplex option as binding edge Long (Portrait) or binding Long Edge (landscape).

  You can save the settings for later use by clicking preset > save current settings as preset.

  Please let me know of any problems,

  Shlomi

• HP OfficeJet Pro 8600: How to print on paper of custom format with Officejet Pro 8600 for Windows 10

  Problem: Cannot create a custom for HP Officejet Pro 8600 paper size

  Found a solution for Windows 7, but I need this same problem solved for Windows 10...

  The solution: 'Using pilot Deskjet 9800 to set a custom paper size to print for Officejet 8600' worked very well for me on a Windows 7 machine...

  However, the HP Deskjet 9800 driver is not available for Windows 10... you have another driver I can use that would work with Windows 10 and which is compatible with the HP Officejet Pro 8600... ???

  Hello

  Use the HP Deskjet 6940 as another driver, if it is not listed under HP it appears after clicking the Windows Update button in the Add Printer dialog box:

  1. Right-click your printer 8600 and select printer Ptoperties. A note which port is selected under Ports.
  2. Click Add a printer.
  3. Click on 'the printer that I want isn't listed.
  4. Select A Local port or a netowrk with manual settings.
  5. Select the port used by your printer.
  6. Select HP
  7. Select HP Deskjet 6940
     Note: Click on Windwos update if it is not listed under HP.
  8. Fill the wizrd and 6940 driver allows you to print a document custom formats.

  Kind regards

  Shlomi

• HP Officejet 8600: HP Officejet Pro 8600 - does not print lower 1/3 of the page

  Text & images on lower 1/3 of the pages do not print on my 8600. I believe that I have updated the printer drivers and my laptop HP dv7 Envy.  I think I checked all the settings - however, the problem persists. Any help would be appreciated.

  Hey @gmi7envy,

  Thanks for posting in the Forum from HP Support.

  I see you have a partial page printing problem when you use your HP Officejet Pro 8600 e-all-in-one printer. I want to help you with this. I have some suggestions that might help.

  I think it is a problem of software, but just in case, try to make a copy of the façade - if printing result is normal appearance, fine. If this is not the case, click here to access hardware troubleshooting tips from HP.

  Assuming you were able to make a decent copy of the façade, we will assume that your printing problems are focused on software. Accordingly, I recommend you try the following steps:

  Uninstall your printer

  • Press the Windows key + r
  • Type of control panel and press enter
  • Click on programs and features
  • Select the driver for your printer from the list, and then click on uninstall.

  Remove temporary files from your PC:

  • Press the Windows key + r
  • Type %temp%, and then press enter
  • Press Ctrl + a to select all files
  • Press Delete
  • Note that some files do not delete - do not worry, this is normal. Simply click ignore that you're prompted.
  • Empty your trash at the end.

  Download the printer Installation Wizard

  Click here to install the HP printer install wizard (instead of directly using the printer driver). When you run it, this utility will facilitate what I hope it's a smoother and more efficient printer installation.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below and clicking 'resolved' (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• OfficeJet Pro 8600: Need universal PCL Driver c. 6.64.0.994

  I have a number of printers Officejet Pro 8600 of the series in a Citrix environment.  Compatibility matrix shows that the only factor taken in charge is version 6.64.0.994, but I can't that hollow on the download site, given that the only approach is "what device do you have" not "what software do you want.  Anyone can hang me up with a link to this version?

  Thank you.

  I suspect that the reference to the 6.64.0.994 version is a reference to a pilot specific printer rather than a universal printer driver (UPD).

  As far as I know, there are three UPDs provided by HP, for the following Languages of Description of Page (PDL, s):

  • PCL5
  • PCL6 (aka PCL XL)
  • PostScript (aka PS)

  The OfficeJet pro 8600 series printers seem to confirm that the PCL 3 enhanced , and PCL 3 GUI PDLs, so would not be able to interpret the print jobs generated by one of these drivers of the UPD .

  ... and this specific printer driver may be available for older versions of some operating systems.

  Note that the document refer to States 'versiondriver in table 5 reflects the information that was available at the time of publication. After publication, new drivers may have been released; other drivers may no longer be available for download from the HP site. "

  It is standard practice for HP (and other printer manufacturers) to produce that printer drivers specific to versions of operating system current when the unit has been produced all first and then rely on pilots (sometimes lightweight) made available by the seller of BONE in some newer versions of OS - but there is no guarantee that these are compatible Citrix.

  It may well be an appropriate driver (although not a UPD), especially as the OfficeJet Pro 8600 series is not that old.

• OfficeJet Pro 8600 Plus exemplary prints with black streaks

  I just bought a HP Officejet Pro 8600 Plus and it seems to work perfectly when printing; However, when I tried to copy something, the copy came out with black streaks that close to unreadable printing and are more dark/concentrate toward the left side of the page.

  How can I solve this problem?

  @Imagehappy, you have the more than 8600 or a different version of the 8600?

  The reason for the question is because I want to give you a link to update the firmware.

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Thank you!

• OfficeJet Pro 8600 Wireless Configuration - print is in the queue, then disappears. Do not print

  I just got the Officejet Pro 8600 as a gift and burden of implementing software and it on my wireless network.  When I try to print an e-mail or a coupon, the command changes to the printer and indicates in the queue. Then after a few seconds, the print queue (work) disappears without printing the document.  This command goes to the HP ePrint feature or the Officejet Pro 8600 network?  It shows the HP ePrint as being on USB.

  I have run all the Diagnostics, downloaded all the new software, software packages and updates.  I spend several hours trying to get to the printer.

  Thanks for any help you can provide.

  Hi @bksechols

  Welcome to the Forums of HP's Support.  I understand that when you send a print job to your printer Officejet 8600 to printing to the queue, then disappears without the printing of the print job.

  To help you, you please provide additional information?

  • How is the printer connected (USB cable, ethernet or wireless)?
  • What operating system do you use?
  • All print jobs fail? If Yes and you are using a Windows operating system, please try printing HP and Scan Doctor for Windows.  HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems.
  • When you send a print job are sending the address of electronic mail of the ePrint printer? If so please check The HP ePrint, print not print job if you send the print job using the print command, please see the document of your HP printer print jobs are stuck in the print queue .

  I look forward to hear from you.

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• HP Officejet Pro 8600 Plus - Duplex printing problem

  I use a printer Officejet Pro 8600 Plus (what is the best printer I've ever had, apart from this problem!).  I use it with Windows 8.1.

  He struggles for more than a few pages print using duplex.  The problem seems to get worse when I print a pdf file.  It starts to print very well and made a few pages, but then I get this message "error on HP Officejet Pro 8600.  "Could not print * name * folder.  It appears on the computer not the printer.

  Any suggestions?

  Thank you

  Hey there @operationorphan

  I just wanted to add my own suggestions here for the issue of two-sided printing that you had with your Officejet 8600.

  You can try to update the firmware: get the latest Firmware and updates

  If this does not help, try to uninstall the printer software , reboot the PC and reinstall the printer. This should dissipate all software problems.

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  See you soon

• HP officejet pro 8600 more random print the unreadable text

  Hello

  I have a problem with a newly acquired HP officejet pro 8600 N911g. When you print the document, some pages are filled with unreadable text instead of the original text (e.g. ' eft! bdujtop! dpssf-wcy TPQ! QSF"). It happens whenever I have print the same document, and sometimes on a few lines of certain pages.

  When the same issue occur on the same page, that's exactly the same gibberish (so it isn't random text).

  Here is an example of an impression goes wrong in the middle of a page.

  The printer is plugged in and the PC is wireless.

  I tried to launch HP print and scan of the doctor, he did not find any problem.

  He tried to print with another PC, same problem happened. My OS is Windows XP with SP2 32 b.

  The printer model number is N911g, the product number is CM750A and the number is 22241.

  Any advice would be helpful.

  Thanks in advance.

  Normally, this means that there is a problem with the radio wireless on the router. It may work fine for everything else for now, but it could be losing signal slowly, that would not be noticed by most of the things until the signal was almost gone. Signals of printing and scanning signal, for some strange reason, I've never even had explained to me, get back on it lose everything first and suffer the worst. I try to search for the firmware updates that may be available for your router, as it may just be a firmware issue that causes a light signal lose. If that does not resolve the problem, I would look in get a new wireless router.

• HP Officejet Pro 8600 Plus "unspecified printer problem.

  I've just set up my HP Officejet Pro 8600 Plus e-all-in-one.  The establishment seemed fine, but when I go to the tab "devices" to "HP" connected there a sign yellow and says that I have a problem with my printer.  When I click on the symbol of the performance, the box says that "a non specifiedproblem has been reported." Please check your printer. ' When I check the printer control panel, there is no reported problem.  The machine seems to print OK, but I want to clarify this error that appears.  Any ideas?

  Also, I've done the restart and sign-off/sign-in stuff, so we can move on to the second order troubleshooting.  Thank you.

  Welcome to the HP support community!

  This error has been reported several times here on the Forum and still no resolution of HP.

  I have the same printer and the same error is reported.  While inconvenient, feel free to ignore it!  :-)

  WyreNut

• OfficeJet Pro 8600 Plus can print Word documents, but cannot print from web sites

  My daughter has an Officejet Pro 8600 more. She uses it with his Macbook Pro. She says she can print word documents, but when it tries to print something on a website everything that comes out of the printer are blank pages.

  Anyone know what this is all about?

  Yes, it is sometimes easier to just go with what works

• HP Officejet Pro 8600 N911g cannot print wireless AirPrint or desktop/laptop

  Hello

  My systems are all running Mac OS X 10.8.2 (Mountain Lion). I have a Linksys E4200 configured for 5 GHz Wireless-A and 2.4 GHz Wireless-G. For testing purposes, I have firewall of the router disabled.

  Here's what I CAN do:

  -connect to the Web server for the printer (printer is correctly connected to the wireless network)

  -print using ePrint (printer running mechanically)

  What I can not do:

  -Install the printer in OS X

  -printing of my office/computer systems portable

  -printing of my devices via AirPrint

  I tried the following:

  -reset the network settings on the printer

  -restart the router

  -restart all systems

  Error messages:

  -System preferences print & Scan shows the printer as "near printers: Officejet Pro 8600 [CBE189].

  -in installation "settings until 'Officejet Pro 8600 [CBE189]" configuration of the device... ". "returns with"Unable to communicate with the printer at the moment"and I have to cancel installation

  -When printing using iOS devices, I can choose the printer, but any print job expires.

  Any help would be greatly appreciated!

  Thank you!

  Too bad! Solution found - unplug the power cord, wait 30 seconds, plug it in again. Pop, it works. (So old-school)