Pre-built developer VMs - lack of shell variables

Similar Questions

• Device VM pre-built for 12 c of database?

  Hi all

  Is he available pre-built for 12 c or 11g (11.2.0.4) databases under Linux?

  Thank you very much.

  JC

  Is he available pre-built for 12 c or 11g (11.2.0.4) databases under Linux?

  You can learn the skill the MORE IMPORTANT is to know how to find information on the internet.

  Until you learn this skill, you will NEVER be successful in things Oracle.

  A simple web search for ' oracle 12 c precompiled virtual computer provided this page as the FIRST result

  Pre-built developer VMs for Oracle VM VirtualBox | Oracle Technology Network

• The "selection of pre-designed developer programs VMs' work on the Windows operating system 7 Home 64-bit

  Hello
  
  Do the work of "Selection of pre-designed developer programs VMs" on laptops with Windows 7 Home premium 64 - bit operating system?
  
  Thank you
  Jeanmarc

  In my view, that should be using the oracle VM. So, you need to check that you can use it on windows 7 Home Edition? If can, the models would work too. I can't check right now since I do not use a pc but the phone for this answer, but think it would be easy.

  Aman...

• Pre-built system Windows XP, try to upgrade the operating system. 8.1 pro. 32-bit.

  Hello

  I have an oldschool pre-constructed Dell I tried to fix up for my wife. The vehicle currently has Windows XP, I'm looking to improve this.
  I bought a key license Pro Windows 8.1, then downloaded the ISO directly from Microsoft software.

  I burned the ISO to a disc and tried to boot from the disk.
  He managed to start the Windows Logo appears, but after a few minutes, before he gives me all the options, I get an error message and have to restart. This happens every time.

  I have more then the minimum specifications required for 8.1.

  I've never dealt with OEM software before and my new driver's license is an OEM key (not that I even got to the step to use it), but I wonder if the OEM of XP is what is causing my problems.

  I'm a PC Builder, avoiding the pre built, but as this has been given to me, I could not say no, but I haven't tried messing around with a considered before, so don't know if she permettai in place to stop the upgrade.

  Any information would be appreciated.

  Hello

  Do the following before upgrade you to Windows 8.1.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  There is a lot of information in this first link from Microsoft:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• Pre-built SQLite Database faster than the construction of the tables?

  Hello.

  This time when running my application for the first time, about 12 SQLite tables are created programmatically, each containing anywhere from 7 to 45 fields. Timing of the launch of the app, a call to a web service also serves the database.

  I noticed that the table under construction seems quite slow, I don't know if it's just because the application runs for the first time and the device must perform some work of registry, or if the table of construction process is actually this takes time.

  From the time I click my app icon at a time that the user interface is displayed with actual data can last from 20 seconds to more than a minute, which is not good. Do I have to create a progress meter to indicate the user to be patient because the database tables will be created, or is it possible to include the database pre-built with my app? If so how would access (where he would be on the filesystem?).

  Thank you very much.

  "If the process of construction is in fact this long"

  That would be my bet.  Easy for you, but check with trace entries.

  "Can I create a progress indicator.

  You should have a flag indicating to the user that you are doing something at least, a kind of circular icon loading would be better than nothing.  If you it can match real progress or not depends on what you are tracking and how.

  "is there a way to include the database pre-built with my app"

  Yes - See the demo of SQL comes with your set of tools.

• Enter choose value in the shell variable

  Hi all

  I am trying to set the value of a select query in a shell variable, but want just the value with any of the text, as shown below:

  invalid_count=`sqlplus / as sysdba <<.eof.
  set pages 0 feed off heading off echo off verify off termout off
  select count(*) from dba_objects where status != 'VALID';
  exit
  .eof.`
  

  $ echo $invalid_count

  SQL * more: Production of the version 11.2.0.4.0 on Mon Jan 25 10:16:22 2016 Copyright (c) 1982, 2013, Oracle. All rights reserved. Connected to: options of Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production with the partitioning, OLAP, Data Mining and Real Application Testing SQL > SQL > SQL 0 > disconnected from the database Oracle 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production with the partitioning, OLAP, Data Mining and Real Application Testing options

  I tried the query with a number of set options but can't seem to get the right combination.

  Any ideas please?

  If sqlplus / as sysdba

  will help you.

• Paginate in PC... advice on such a pre-built gtx1080 system?

  I am currently using a MBP 2012 and do the jump on a desktop PC this month... want just some thoughts more experienced...

  What do you think of a game system pre-built like this (with the new gtx1080 card) for all the days of After Effects and Premiere Pro work?

  Game system Assassin 1080 PCCG [PCCG-ASSASSIN1080]: case PC Gear

  (The only thing I would change is the RAM (from 16 GB to 32 GB), but I don't know yet if it's possible because I'm still learning what is compatible with what atm)

  Another local place gave me a quote for a similar system using a 6700K, the 980Ti, the motherboard i7 cheaper, the 32 GB, power 950W... but it's almost $1000 more... and I'm not sure if I'm missing something with that price difference?

  Thanks for any thoughts.

  At this point, it would be a total waste of money to get a GTX 1080 ' cos not even support a single program and probably even future versions of CC 2016 will not be in their original versions. Use of AE on this side of the GPU acceleration is limited because it has always been, and even in Premiere Pro you can see not much difference between the cheapest and most expensive GPU because you never have to a point where this would be necessary. At least in the graphics Department is seriously specced too. You can easily get a 970 males and save almost 700 GTX on that alone. The rest will depend on. More expensive motherboards tend simply to have more controllers as additional 3 USB ports, hardware integrated RAID or even a way complete additional PCIx for additional cards, most of which you probably never use, in any case. More memory on the other hand never did wrong, so definitely get 32 GB. Everything else that we do not really know. A lot of price differences down to where a seller gets his stuff. Major outputs often use in bulk ware directly to manufacturers and their supply chains and due to the mass get huge reductions while local retailers usually depend on using versions nicely packaged at retail, which are more expensive initially.

  Mylenium

• Can I create new database HCM92 on pre-built VM?

  Hello

  Does anyone know if it is possible to create a vacuum HCM of the database on the pre-built VM provided by oracle? If so, how to accomplish this?

  Thank you!

  OK, if the virtual machine is interesting at several points, I would definitely go for an installation of Peoplesoft to start from scratch and go further in the investigation, why you are facing problems. You'll learn very probably more this way. You can obviously learn delivered virtual machines but I would be careful, they are given by Oracle to fine details and as I said above, you can have a few scripts 'missing'... they also have their own structure, their own scripts to start with the peculiarities of the VM...

  Nicolas.

• Pre-built virtual machine with OBIEE and APEX

  Hi all
  
  I searched for a virtual machine with OBIEE and APEX pre-installed, but I can't find it... or information messages on this subject. Does anyone know if y at - it a selection of pre-designed developer programs VM with these two tools?
  I currently have the "database App Development VM' with APEX in there, but I can't understand how to install OBIEE inside.
  
  Any help will be appreciated.
  
  Please, if this is not the right category where I should ask the question, let me know and I'll move it.
  
  Thank you.
  Elena.

  PL see deployment guide in the link above - the model of computer virtual includes version of database 11.2.0.3, which should be the APEX installed by default in it. If this isn't the case, it will be much easier to install the APEX in the VM OBIEE.

  For sharing files between the host and the guest, pl see the Virtualbox documentation - http://www.virtualbox.org/manual/ch04.html#sharedfolders

  HTH
  Srini

• Not in line extends from pre-built DS2DB model without database and systems of DS2?

  After a lot of work (mostly struggling with Windows since I was a UNIX Guy: errors with Exchange 2007 starts do not transport hub because IPv6 has been disabled, STAF, refusing on W2K8 connections due to firewall Windows and another problem, I'll post separately on about DB restorations that occur on systems OlioDB) (, OlioWeb, DS2Web * and DS2DB, where I had to modify the xml file for the root directory cd) I was finally able to run a number of tests on 1, 2 and 3 tiles.

  However, I see a weird behavior with the DS2DB system.

  First of all, the pre-built model does NOT contain a database... you must go through the guide to create (Page 121)... I've lost at least a day to diagnose a non-compliant execution which showed to 0 for all the stuff of DS2 and it was because I thought there was a database (it is for olive oil) but there is no, and the scripts just go on their way (even if the restoration of DS2DB specifically indicates an error indicating that the DS2 (, there is no database)... it would have been nice to have that in the documentation, unless I'm missing something (please don't say if I AM).

  Secondly, I had a few compliant and non-compliant results due to the number of QoS on the DS2DB. I started to try to debug using MySQL to see what could be the problem and it seems to be related to the CUST_HIST within DS2 table. Sometimes, it will take 2 minutes to reload (at the beginning of the trial) the DS2DB (running ConfigServer_DS2db.sh), other times, it could take 20 to 30 minutes. Usually when the refill is quick, the results of the tests are in line... when recharging takes a lot of time, I get the test results non-compliant due to the extent of QoS (about 500).

  I tried to re-cloning systems, and moving it to differerent storage but I can't find a pattern at this point.

  Does anyone else have this problem?

  Thank you.

  PG 55, step 4.  You must create the database after the implementation of the model.  The virtual machine is too large to distribute with a pre-defined DB.

  The restoration will take about 20-30 minutes if you have a dirty DB from a time 3 runs (most of that time is in the table CUST_HIST).  I have spent a LOT of time trying to accelerate without success (only solution seems to be using MySQL 5.1 with partitions, planned for a later version). It will take about 2 minutes if the DB is already clean.

  What is your storage space for DB DS2? It's quite intensive disk.

  What do you get if you just run a single web interface manually?

  ds2webdriver - target = - n_threads = 10 - db_size = 20 GB - think_time = 0.085

  Also check that you have not run out of disk space on the VM DB.  This can occur if you are running for a long time or do several courses without restore.

• How to start the APEX in Oracle developer pre-built VM

  Hello community,

  I have download the DB VM developer

  Developer Day - database application development practice

  I start the virtual machine, but do not know how I can start the listener of the apex and ADR?

  I assume that the virtual machine is ready for anything and play without the developer dealing with service installation and configuration?

  I watch the lsnrctl status:

  [oracle@localhost ~] $ lsnrctl status

  LSNRCTL for Linux: Version 12.1.0.2.0 - Production on April 9, 2015 11:50:27

  Copyright (c) 1991, 2014, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=0.0.0.0) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 12.1.0.2.0 - Production

  Start date April 9, 2015 11:04:17

  Uptime 0 days 0 h 46 min 9 s

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /home/oracle/app/oracle/product/12.1.0/dbhome_1/network/admin/listener.ora file

  The listener log file /home/Oracle/app/Oracle/diag/tnslsnr/localhost/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=0.0.0.0) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 2121))(HOST=localhost)) (Presentation = FTP)(Session=RAW))

  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=localhost)(PORT=5500))(Security=(my_wallet_directory=/home/oracle/app/oracle/product/12.1.0/dbhome_1/admin/cdb1/xdb_wallet))(Presentation=HTTP)(Session=RAW))

  Summary of services...

  Service 'cdb1' has 1 instance (s).

  'Cdb1' instance, State LOAN, has 1 operation for this service...

  Service 'cdb1XDB' has 1 instance (s).

  'Cdb1' instance, State LOAN, has 1 operation for this service...

  Service "orcl" has 1 instance (s).

  'Cdb1' instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  It seems that there is no listener for APEX or ADR

  How can I get that will easily?

  I just downloaded the latest ADR. Unzip it and do

  java-jar

  ords.jar

  and follow the prompt and it works

  two things I noticed.

  1. Make sure that apex_public_user is good to go
  2. make sure to put the correct directory for static
  3. Choose a port that is not used

  the configuration is in properties files and need to be changed...

  I wonder why this virtual machine does not right out of the box and looks like it sets up to 8080

  but it does not work when I do one

  localhost: 8080 / apex

  I guess that everything should work right out of the virtual machine and config...

• Store of value returned by the procedure in the shell variable

  Hi gurus,
  
  I am trying to store THE return value of the procedure parameter in the variable shell like below;
  
  RET_VAL = "sqlplus $DB_USER / $DB_PASS < < EOT |" egrep. > $SCRIPT.tmp
  Set linesize 2500 pagesize 0 echo off road feedback off verify off
  Line of VARIABLE VARCHAR2 (4000)
  exec UPCStreamDiffNodeVersions($MStreamName,$oldVersion,$newVersion,:line);
  print the line;
  EOT'
  
  echo $RET_VAL
  
  I can print what is in the variable line, but can not enter in the $RET_VAL. Please suggest.
  
  Concerning
  Fox

  Solomon Yakobson says:

  EdStevens wrote:
  This not only would get the return code of execution of sqlplus itself

  NOP, he returned to any output (no return code) produced by SQL * Plus the term:

  create or replace
  procedure in_out(
  v_in varchar2,
  v_out out varchar2
  )
  is
  begin
  v_out := v_in;
  end;
  /
  

  prompt > export IN = EdStevens
  prompt > RET_VAL ='sqlplus-s /.<>
  Set feedback off
  Go head
  Line of VARIABLE VARCHAR2 (4000)
  exec in_out('$IN',:line);
  print the line;
  EXPRESSIONS OF FOLKLORE"
  prompt > echo $RET_VAL
  EdStevens
  Guest >

  SY.

  I was wrong. And after thinking it an another half minute... Well, of course!
  ;-)

• Error: bad or lack of shell startup

  original title: error starting

  "Bad or missing command interpreter", and "Enter the correct name of the shell" "has > _", rises while Iam trying to start my computer. ""

  Hello

  A Windows computer may become unbootable for several reasons, ranging from an incorrect configuration on a damaged hard disk.

  Note: If it has been a hard drive related question, chances are that you may lose all your data, which still needs to apply your previous backup.

  The error above can occur in a variety of situations, some of which have been listed under:

  ·         The computer tries to boot from a non bootable floppy or CD present in the drive.

  ·         Hard drive has not been correctly configured in the CMOS.

  ·         One of the drvspace.bin command.com, io.sys and msdos.sys files is missing or damaged.

  ·         The hard drive is damaged MBR or partition table is damaged

  Solutions to given problems are as below:

  Step 1: make sure that no diskette or CD is in your computer when you try to start your computer.

  Step 2: Configure the options to start properly. Is the boot sequence right-'Disk', 'Hard', 'CD', and ' network

  NOTE: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 3: Repair the master boot record by using the Windows XP Recovery Console, the command fixmbr.

  a. start your computer with a Windows repair or installation disk.

  b. at the command prompt, run' / fixmbr' command without the quotation marks.

  How to install and use the recovery console in Windows XP:http://support.microsoft.com/kb/307654/

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Possible to develop a chain of the variable inside a literal hash table?

  Attempt to run together-qadcomputer

  together-qadcomputer $adserver - ObjectAttributes @{$VARIABLENAME}

  When I do that - I get the error: Missing '=' operator after the literal hash key.

  
  The string variable contains the equivalent of the data pairs = of value that works when the entries manually.

  $VARIABLENAME = "' edsvaVar1"= $valeur1;"edsvaVar2"= $valeur2;"edsvaVar3'= $Value3 '.

  When I read the $VARIABLENAME, I see the values that I expect.  I want the same effect of in the literal hash required for the cmdlet set-qadcomputer when you use the @ {BOM} that supports several pairs of value.

  Possible?

  ARS 6.9

  There are two ways to do this.  Add command-line string and then use invoke-expression not at my peak, I think it is the correct command, I used this in a prior cultures and when just debugging print any line to ensure that the expansion works well.  The other option is to use a hash table to store the settings of command and a third, I just thought that everything is instead of create a variable string place the attribute pairs in a table, I'm sure it will work also.  If you can only use a string and then use the invoke-expression cmdlet.

• How to mount a photo gallery pre-built in a 800 x 600 box?

  Hi all.

  I downloaded a .fla pre-defined Gallery (570 x 350) this http://www.flashmagazine.com/Tutorials/detail/as3_photo_gallery/ lesson to insert in my project (800 x 600).

  I don't understand where the difficulty of fit on my site.

  I copy the fotograms and AS3 code of the original file and stick it on mine (I used only 10images), it works, but I don't know where I can solve this problem:

  (1) the Gallery is on the menu and I want to keep in the Center.

  

  (2) if I click on the image (randomly) the result is the same, I have the picture on the menu, and I should like to focus

  

  The code is AS3 and available here http://www.Flashmagazine.com/tutorials/detail/as3_photo_gallery/

  Thanks for the help.

  Because the Gallery is created dynamically, it doesn't have a clean house in the timeline panel.  You will need to do is place an empty movieclip on the stage in the gallery section.  Place it on the left edge of the scene where you want the top of the thumbs and give it an instance name, 'sprite' would be good because it will save you a recoding.  Then, you want to remove the code that dynamically creates the "leprechaun".  See if you can understand this part.