pre loaded cards HELP Vista Business!

Similar Questions

• Qosmio G10 - compatibility with video cards with VISTA BUSINESS

  THE VIDEO CARD IS NOT COMPATIBLE UND UPDATE THE MICROSFT HOME PAGE IS ALSO NOT OK
  PLEASE SEND ME AN UPDATE FOR TH QOSMIO G10 GRAFIK

  Hello Michael

  Qosmio G10 Vista capable laptop is? There the Vista capable label?

  http://support.toshiba-tro.de/KB0/TSB7101O80001R01.htm

• HP XW6400 problem loading Vista Business

  Hey all,.

  I just took a XW6400 on Ebay and the auction has just declared that he only started the bios configuration screen.  I literally have no idea of the State of functioning of the parts below.  Here are the following specifications:

  4 GB RAM (has not considered whether it is ecc or not)

  Single XEON 5130 (2.0 ghz)

  ATI x 1300 video card

  40 GB SATA hard drive

  SATA 200 GB HDD

  DVD Rom

  DVD Writer/Rom

  Latest version of the BIOS: 2.38 (with the default values loaded)

  Part number: RB318UT #ABA

  Serial number: xxxxxxxxxx

  I use the computer for mainly surfing the net, playing some older games, but absolutely nothing of what the computer was destined (all resources, graphics intensive applications, etc.).  It's going to be my computer shop for internet research on how to fix pinball machines.  I am using computers for 30 years, so aware of all material am but not at a technical level of COMPUTING.  I can take pictures, or perform diagnostics that help solve this problem and post it here if necessary.

  I'm having a lot of trouble with a very slow loading Vista Business x 64 (ISO DVD created vistax64.com image).  It literally took about 8 hours now, from one day to the next, and I'm finally in the "Complete the Installation" installation (the progress bar green to low is about 75%) and he's been there 45 minutes now, but it could be longer, just noticed this after waking up and controlled again.  I would appreciate help with the following questions:

  #1: loading XP pro, the system stops just to the material 'verification' screen and locks upward.  Could be a problem with the Vista question above?

  #2: is it possible to load Windows 7 Home Premium on the machine, as well as the edition of Vista Business no?  The installation will simply not work on the machine if you use the standard version of Vista?

  #3: when you use the NON ecc memory, the computer performs strangely like that?  It is absolutely a requirement of memory ECC FB when not to use applications requiring?

  #4: if it finally load on the system and the system seems to work ok, is this slow loading problem a precursor to everything that you guys can imagine of?  Or I was just in the hospital?

  #5: when you add another processor, read the code of the same batch of CPU guarantees compatibility for a two-way configuration?  Or can I just get any other Xeon 5130?

  #6: I don't have a floppy drive on the system, but you guys can recommend a good hardware bootable USB or CD/DVD test software, which is a freeware if all goes well?

  #7: I lent my copy of Vista professional before, so I guess it's possible (but unlikely) someone could use the certificate of authenticity.  The installation say he is recorded online for you.  Is it possible that the copy has been used and is already registered to someone else?  Which would explain this problem?

  #8: is it possible to get a CD of HP restore again?

  I did the memory test on the Vista installation CD, and it passes.  I also shared my GForce 9800 GTX video card and am having the same problem.  Also, any general troubleshooting other thoughts would be appreciated.

  -Pat

  Edit: I went to the appointment of a DR and the come back about an hour and a half later, since this original post.  Now, during the installation screen complete, the progress bar has moved maybe another 10% is now about 85%.  It seems to load, but why so ssllooww?

  P.S. We have removed a number of your post for your secutiry. That is the information you probably don't want available to the public. -HP moderator of the Forum

  I got it to work.  Unfortunately, it is not useful for searching the Internet.  But i:

  Reduced system memory 2 gig.

  Renewed, cleaned and reinstall thermal paste for the cpu and the heatsink.

  removed the hard drive the system came with and just used well-known 200gig hard drive.

  Left the hard drive and cdrom SATA0 and SATA1, SATA2, and SATA3.

  And the big one, I loaded Win7 x 64 home premium.

  I'm typing on it now and updated as we speak.  However, I am always interested some of the answers to the questions.

  #1: what will happen if I used of non - ecc memory?  The system works not at all, or be slow?

  #2: and it is always possible to obtain HP restore disks?  (Edit 12/14)  I was not able to find a way to get drives install in addition to bring 2nd hand (ebay), but most of the original software is located on the support xw6600 site.

  I ordered 2 XEON Processors off ebay, another 8 GB of ram and the hp cpu heatsink and fan.  Time for fun!

  -Pat

• I can load PowerPoint in Office 2007 Pro * upgrade * (2007 version) on my Dell D630 running on Vista Business with Office Basic 2007?

  I have Vista Business on a Dell D630 with Office Basic 2007. I need to use Powerpoint and Publisher, but it is not included in the basic package. I have Office 2007 Professional upgrade (version 2007) my previous laptop Dell, which has since been destroyed. Can I load this on my new laptop and make it work properly, without damaging one of the other programs?

  Hello

  Check with the PowerPoint Experts in these groups: (re - ask your question)

  Answers - PowerPoint
  http://answers.Microsoft.com/en-us/Office/ee861098.aspx
  Answers - installation, upgrading, and activating Microsoft Office products
  http://social.answers.Microsoft.com/forums/en-us/OfficeInstall/threads?LC=1033&filter=answered

  Answers - Microsoft Office
  http://answers.Microsoft.com/en-us/Office/default.aspx

  Discussions of general issues of PowerPoint
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.PowerPoint&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  Or:

  Microsoft.public.powerpoint discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.PowerPoint&cat=en_us_e350bf4a-e32b-4C92-9755-2c19f5f893d0&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Help, please! HOW CAN I CANCEL A MERGER IN NETWORK ON VISTA BUSINESS?

  Recently, I'm new to Vista Business & while I was setting up networks I have merged with a wireless network, on the accident. Now, I have all of other windows programs on my hard drive & I can't undo that! I tried several times to restore but it fails. How can I reverse this? I want to just my old network LAN back! Help, please!

  I'm sorry, but there is no point at all. If you connected by mistake to an another unsecured wireless network, you do not have all their programs installed on your hard drive. You could see everything on the hard drive of this person if you look at what it is sharing, but all his stuff cannot magically transferred to your computer. If you know this person, it would be a good thing to explain why it is important to use good encryption on wireless networks. They are probably completely unaware of what they are doing and would be horrified to know that their stuff is visible in the world.

  Better, please explain what is the configuration of your network and what you were doing. If you try to connect to your wireless network, maybe you didn't your configured properly and that is why you connect to hers. This often occurs if both parties leave the default SSID (wireless network name). Example: If you have both left to 'Linksys', you could connect to the Linksys instead of your Linksys. Just for completeness, here are the instructions for implementing a secure wireless network:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.
  MS - MVP - Elephant Boy computers - don't panic!

• I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

  I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

  Thank you
  Peter

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
  set up the network.

  ====================================

  Or you can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error loading of mcafee 8.7 on 32bit__ Vista Business

  Error loading of mcafee 8.7 on Vista Business 32-bit

  Hi Brattler,

  To focus in the right direction, please provide you receive the exact error message.

  You try to install the software on the internet or on a CD?

  You can try things:

  O make sure you run the computer as an administrator.

  Ø MacAfee to uninstall completely by running the McAfee removal tool, restart the computer and try to reinstall MacAfee, see link below:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Ø you can also ask your question here:

  http://community.McAfee.com/index.jspa

  See the link below for more information:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help to restore my pre loaded Windows 7 Home Basic

  I bought the SONY VAIO with windows 7 Home Basic pre loaded.

  The hard drive had to be replaced and the repairman charged ultima windows
  by mistake, instead of my real pre loaded windows Home Basic 7
  due to which I get 'NOT genuine software '.
  / Experts of the forum can help me please. Kindly give me detailed process since I am not an expert.
  Thanks in advance
  Ramesh Vasappanavara

  You will need create an all in one DVD and select Reinstall Windows 7 Home Basic Edition. The following article will show you how:

  For a DVD that contains all the flavors of 32-bit and a DVD that contains all the flavors of 64-bit Windows 7: Starter, Home Basic , Home Premium, Professional and Ultimate see here

• Cannot install Vista Business on Portege M400 - IDE issues

  Hi guys... I am looking for your help.

  I downloaded all the new Vista drivers avaiable from Toshiba in support of the new installation of Vista business on my old Portege M400, that came preloaded with a version of XP Tablet and kept their loan on a CD.

  I also upgraded the version of the ACPI BIOS to the latest available 3.80.

  I insert the first CD of Vista professional and do a boot. (I also have a n upgrade Vista Business CD but I want to do a clean install).
  I go past the first steps and choose Install.
  I am faced with an error message "no disk has been found. "Click on load a driver to provide a device for installing mass storage.

  Looks like Vista is not able to see the IDE drive to the edge and it's a driver problem.

  I touched the "Rescan" button available on the windows installation and another message appears: "no device drivers were found. Make sure that the installation media contains the correct driver, and then click OK. »

  Currently loaded on the XP: currently loaded poster IDE ATA/ATAPI controllers like Device Manager: "Intel (R) 82801 G (ICH7 Family) Ultra ATA Storage Controllers and primary IDE channel."

  Hard drives shown are: Toshiba RAID SCSI Disk Device LD0

  Pls tell, what new drivers since available downloads of drivers Vista for my model 400 ML PPM40E, should I choose here for my Vista installation recognizes the disk available?

  Hello

  It is very easy to solve this problem.
  If you would look on the page of the European driver Toshiba (Portege M400 section), then you will notice that a RAID driver is available for this model of laptop.

  Impossible to install Vista because it cannot find the HARD drive due to lack of RAID driver!

  You must install the RAID driver first and then you can proceed with the installation of Vista.
  As far as I know the Vista installation accepting the USB flash key you can use this key to include the RAID driver.

  Hope I could give some useful advice.

  Cheers mate

• Tecra M9 crashes when the apparatus or the lid close on Windows Vista Business

  Hello

  I have a Tecra M9 with Windows Vista business, and when I close the lid on the laptop that Windows puts on hold. When I open the lid, although wakes up the computer screen but it crashes.

  Even if I have the machine on the docking station when I disconnect the machine crashes.
  Any ideas? Any help much appreciated.

  Mike

  Hello

  I don't know what you mean in crashes, but I know that this can happen after the standby/hibernation mode, that this sound card is not recognized correctly. To resolve this problem, you must install the hotfix for Microsoft Vista (937077 KB) on the Microsoft network site: http://support.microsoft.com/kb/937077

  Just a question: have you noticed this problem since the first day or after a few days of use?

• I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  After starting my Windows I got these message below

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.256.6
  Locale ID: 2052

  More information about the problem:
  BCCode: a
  BCP1: 00000000
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 82E9837B
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini041011-01.dmp
  C:\Users\TanXR\AppData\Local\Temp\WER-104083-0.SysData.XML
  C:\Users\TanXR\AppData\Local\Temp\WER8B1F.tmp.version.txt

  
  C:\Windows\Minidump\Mini041011-01.dmp

  View your dump using file:
  BlueScreenView v1.32 - seen BSOD (blue screen) crash information stored in the dump files.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  For each accident displayed in the upper pane, you can view the details of the drivers of the devices loaded during the crash in the lower pane. Do a search on google for the drivers to know what device belongs to uninstall, reinstall, or download the latest driver from the manufacturer website.

• eror message when I connect a profile of the user of Windows Vista Business Service has no logon.

  eror message when I connect a profile of the user of Windows Vista Business Service has no logon. Failed to load the user profile after wimdows update I have this problem I try safe mode but the gel keyboard, I try F12 boot does not work please, someone came to help me I need my computer for work

  Hello

  as you can not get into safe mode and work within the keyboard freezes in safe mode to do a startup repair disk

  then do a restore of the system of breast

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and to read this information to try to fix the user profile cannot be loaded problem

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Webcam 2.0 integrated 1.3meg using vista business pro 32 bit keeps falling of the driver.

  Its Spartan laptap running vista business 32 bit pro... Toshiba and asus are listed as manufacturers and I have no idea which continues, I had this work and it was an old from my boss.

  The build in webcam does not work.

  I found a driver that fixed, but none where he dissappeared and now its still doesn't work and I can't me remember how I fixed it before. Why is there a free service offered by any manufacturer just scans and charge what you need? This Hunt the internets, while trying to not download anything destructive is terrible.

  (ms-16372 model #?)

  1.3 megapixel camera

  Vista business pro 32 bit

  Cam does not appear in the bios or Device Manager... same as the first time... when I loaded the previous driver as if by magic, apparently. How can I know which is the right that there are 1000 of the drivers out there for this brand of cam (chicony I guess) and I honestly think it was an XP driver who actually does the work before...

  Help!

  Its Spartan laptap running vista business 32 bit pro... Toshiba and asus are listed as manufacturers and I have no idea which continues, I had this work and it was an old from my boss.

  The build in webcam does not work.

  I found a driver that fixed, but none where he dissappeared and now its still doesn't work and I can't me remember how I fixed it before. Why is there a free service offered by any manufacturer just scans and charge what you need? This Hunt the internets, while trying to not download anything destructive is terrible.

  (ms-16372 model #?)

  1.3 megapixel camera

  Vista business pro 32 bit

  Cam does not appear in the bios or Device Manager... same as the first time... when I loaded the previous driver as if by magic, apparently. How can I know which is the right that there are 1000 of the drivers out there for this brand of cam (chicony I guess) and I honestly think it was an XP driver who actually does the work before...

  Help!

  Hey Leakim13

  as it's a webcam built into your laptop, you would normally look for the drivers and the software on the manufacturers Web site

  you go find a drivers and software section key in your model number and download it install the latest available drivers software

  and if do you repair do not install hardware 3rd party from windows update drivers

  Walter, the time zone traveller

• SONY Memory Stick PRO-HG Duo MS-HX16A doesn't work in Vista Business 32-bit

  When I insert my memory stick Duo PRO-HG in my laptop gateway E - 155 running Vista 32-bit Professional (Service Pack 2), and I check the Device Manager, a device called "MemoryDisk0" appears under the "Disk drives" section of Device Manager.  It runs by default windows drivers disk.sys and partmg.sys.  The disk memory is not recognized by Windows (it does appear as a hard drive under 'Computer'), or he 'fills' when this button is pressed under "Volume" in the Panel properties for MemoryDisk0 (I get an error msg).  ALSO: if I hit "Scan for hardware changes" or even "Uninstall" for this device, the system just loops - nothing happens, and I have to use Windows Task Manager to end the task.  ALSO: if I try to restart my computer, Windows will not come - I need to remove the Memory stick or return o a previous installation of good.

  How can I get Windows Vista Business 32-bit to recognize the drive correctly?  I visited the site of SONY, and the only driver I can find for sticks of memory is the MSAC-EX1.  I did try and 'forcing' Device Manager Vista to load this driver for MemoryStick0, but Windows says that it is not a compatible driver.

  Hello

  1. When you mention "I get a msg of error", what is you get the exact error message?

  In Device Manager , right-click on the "MemoryDisk0" and select Properties, and check what error code you get and post back with the details.

  2. have you tried to connect a different Memory Stick?

  If other USB keys connect very well, then I think your SONY Memory Stick PRO-HG Duo MS-HX16A could be faulty and you may have to contact Sony for better help.

  Afterwards, do a right-click on the device (MemoryDisk0) in Device Manager and try to update and check if that helps.
   
  Aziz Nadeem - Microsoft Support

• Vista Business 64-Bit with AutoCAD 2009 does not seem to use all 8 GB of RAM available.

  A workstation newly built (S5000XVN Intel / Xeon / 8 GB RAM / 2 GB RAM video) with Windows Vista Business 64-bit is used with AutoCAD 2009 (64-bit).  The workstation hangs under stress, apparently because not enough RAM is available.  ("Stress" is "Turning entirely made of a certain complexity 3D drawings")

  The Task Manager / Performance tab indicates never to use RAM above about 3.25 GB, even if ten or more concurrent applications are loaded, including IE 8 (6 graphically heavy windows) and AutoCAD with 6 or more complex drawings open at the same time.

  There are two issues, I think:
  1. in the event that a busy workstation indicate use RAM above the 32-old bit of 3.2 GB limit?
  2 are there MS Windows Vista settings that are necessary to ensure the use of RAM available?

  Thanks in advance.

  Thanks for the reply.

  I studied the installation of AutoCAD 2009.  It's actually the 64-bit version that is installed, and the Task Manager reports it as a 64-bit application when it runs.  (In other words, it is not marked as a 32 bit application.)

  I must admit that I no longer believe that the machine is running out of resources or do not use all the resources available to it.  We tested the machine by throwing 18 complex, fully rendering the 3D drawings within the Academy, in addition to two cases of IE 8, three instances of Explorer Windows and MS Windows Mail.  Use of the RAM did climb, reaching finally the 4.06 GB, clearly indicating that the 32-bit 3.2 GB limit has been exceeded.  It seems that just drawings don't take up that much RAM.  BTW, there was no increase in the paging activity that I could see.

  However, the application does not seem to be frozen or looping when the client attempted to turn one of the drawings.  The CPU on the two wires (Xeon processor) usage increased to 55% and remained there. the State of the process, as reported by the task manager went to "Not responding" and stayed there; and the display of the image froze on an empty workspace, with a three seconds flash drawing on every 20 seconds.

  So: It now seems that there is a problem with AutoCAD, not a Vista problem.  I would appreciate comments, however, if you think that this analysis is wrong, incomplete or based on wrong assumptions.

  Thanks for your help.