Pre-opening Configuration / sweeping home

Similar Questions

• pre-opening Cisco Secure Desktop policies

  Hello

  We just do 2 updates on our asa 5510...

  1. we have improved our ASA 5510 6.21 to 6.41 firmware

  2. we have also improved for the last package of csd

  (we have improved from 3.5.841 to 3.5.2008)

  After 2 refills, it seems that all my policies pre-opening disappeared

  I try to activate / disable the CSD and they won't come back...

  I only have the default policy

  What can I do to get back them?

  any clues on this?

  Thanks for the help!

  You will not be able to recover it, but check to see if one of your old configuration still exists in flash.

  The CSD is stored in a file called "data.xml", there is on the flash of the SAA in the sdesktop directory. You can try to tftp this disabled the flash of the ASA file and see if it contains no remenants of your previous config of csd.

  CD desktop

  dir

  (you should see the file called "Data.xml")

  copy tftp flash:/sdesktop/data.xml

  If when you view this file you don't see one of your old settings of localization of CSD, then I think you'll be out of luck unless you have a copy saved to another location.

  -heather

  Don't forget to note all the messages you help and mark the issue as resolved.

• havig problem with an additional opening with my home page start page

  When I open firefox, my home page opens and then a second page opens. This second page does not reveal a url and contains several buttons to select sites like facebook. Also, I get a mobile pop-up window down on the bottom of my start page advertising coupons and discounts. I'm not one of them to go. It's boring. I'm not really computer literate, and my son tried it overlooking and suggested the support forum. Any help would be greatly appreciated

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  I think that one of your modules could be ad-ware.

• How do you define new tabs to open with the home page

  When I open a new tab, I want to open it with my home page. Currently, I have to click on the Home icon to go to my home page. The first tab opens on my home page but not extra.

  You can middle - click the Home button to open Firefox to your home page in a new tab.

  Or you can install this add-on:
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-homepage/

• I can't open firefox. Home page comes up, I get just the reporter Crash asking to restart/quit but every time I do the same message always comes back.

  I can't open Firefox. Home page comes up, I get just the reporter Crash asking me to restart/quit but every time I do the same message always comes back. I was not able to use Firefox for days now.

  In recent days, we have a lot of crashes with Trusteer report. If you have this program, try to disable it and see if that stops the noise.
  
  You can stop the report by using the Start Menu > programs > Trusteer report > report stop
  
  You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
  
  http://www.Trusteer.com/support/en/report-problem

  If you do not report, so we have a crash report ID. When you send a report of the Mozilla crash puts it right in a gigantic database. We have no way to seek without the ID of the report. I don't know what the problem is without searching the crash report. Please get the ID of your last report of the accident report.
  
  See https://support.mozilla.com/en-US/kb/Firefox%20crashes
  
  or http://kb.mozillazine.org/Firefox_crashes

• Dv6-7020us, B4T90UA #ABA: without a prescription a recovery disc how to download pre installed windows 7 Home premium OA 64-bit?

  Hello

  I have a backside product key for my laptop and I want to download the pre installed windows 7 Home premium OA 64-bit. I'm now using windows 10.

  Model: dv6-7020us

  Product: B4T90UA #ABA

  [Personal information]

  A few minutes earlier teacher replied I order a recovery dvd or contact service support Hp customer. He also told me that they can not be downloaded.

  But I want to know, without order recovery dvd media is possible to download and install windows with my serial key?

  Thank you.

  Rapenne

  RAPENNE

  CELINE

  I have already responded to your other thread - so why are asking you the same question over and over?

  You will continue to get the same answer: it can NOT be downloaded!  You need to order recovery HP media.

  Period.

• Since I have been to connect on Facebook, but it cannot open the Facebook home page.

  Dear Sir or Madam:

  Given that I was connect on Facebook, but it cannot open the Facebook home page, home page is empty, and he showed a massage on th botum of screen says "done, but with errors on page", I need help to teach me how to fix it. I am using Windows XP SP3, IE 8.

  Thanks for your time and your attention. I Muta hear you as soon as possible.

  Best regards

  Henry

  Henry, have you tried clearing your browser cache and cookies? Also, try a different browser (Tip: Chrome).

• How can I configure new tab to open a certain (home) page?

  I would like to be able to open a new tab that goes directly to my home page. How can I do this?

  This module allows to add this feature to Firefox.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-homepage/

• Pre EAS configuration steps

  First of all my environment:

  Windows Server 2008 running Exchange 2007 SP1

  Auto generated certificates (I didn't spit the outrageous fees public certificate yet)

  Palm Pre WebOS 1.04

  I had a devil of a time getting EAS to work, and I thought I'd share the steps we have taken to get there... Here are the General steps meant to help you where you need to go, I am not guaranteeing accurate and click screen.

  (1) make sure that you have a certificate generated by your server, yes it must have the name of your e-mail server either mail.domain.com in the certificate.

  (2) export certificate EXCHANGE, nowhere else, not IIS, not IE.  Follow this link to export the certificate of the Exchange shell and note that the user name field is not used for something in this field will not matter, but the password field must adhere to your strategy of password, so make sure that you meet the requirements of minimum password when you enter a password for your exported certificate file.  http://TechNet.Microsoft.com/en-us/library/bb310778.aspx

  (3) followed the others posts on how to save the certificate on your pre.  Bottom line, connect to your pc via usb cable, USB drive, do a right-click on the cert file and send to, Palm Pre by car.  Disconnect before.  Then follow the steps to accept the certificate.

  (4) on the Exchange Server, make sure that Microsoft Active Sync is set up and configured to use SSL (Server Configuration/Client Access, click the Active Sync).  You must enable SSL under IIS to your Web console. You're in IIS and Exchange Management Console services manager.

  (5) right click on the Active Sync service, click Properties.  Make sure that your URL is correct and that your firewall/router is configured to pass 443 traffic to the IP address of web internal URL listed here on the property page.  Mine is in this format: https://mail.domain-name.com/Microsoft-Server-ActiveSync

  6) click on the Authentication tab.  LEAVE THE BOX CHECKED for basic authentication... I had this not controlled and once we had the certificate and configured routing this was our last issue.

  7) go to your pre, make sure the cert is loaded with confidence.  Then configure your Exchange account for Regional service by following the steps.  You should be good to go!  I hope this helps.

  Matt Haywood

  Matt,

  First of all, I got it to connect today.

  Yes, I was able to export the certificate of the Exchange Server with the .cer extension and install this on the pre.  So that the research on this more, I was convinced that the name of the subject of the certificate should match the field in my mail server address, I tried to connect to.  So, I thought that the name turned to the public in the mail server entry (for example, https://mail.mydomain.org) would not work with a certificate which had a name of topic for an internal domain name (for example, mail.mydomain.local)

  Another forum discussions seem to indicate clearly that the Palm software is not read topic several other names, no more, even if turned to the public name is included in the San of the self-signed certificate.

  These discussions have also suggested that the certificate that is really necessary is that of CA.  So, I opened the MMC on our mail server. Add the Certificates snap for the computer account; drill down to the root Certification authorities to trust; Open the CertAuth certificate and exported it in the same way (extension .cer base64, no key or password); This charge on the Meadow while leaving the other installed certificate.

  He signed the and immediately started the synchronization.

  I will experiment a little more to see if only one certificate is needed, as some authors have claimed.  I also wanted to play with a third-party domain certificate that we have, I understand also pose problems for owners of pre (since it is a generic cert instead of a specific for the mail server).

  Moreover, my Pre came with version 1.0.3 of the software and I have not yet downloaded 1.0.4.

  Thanks for your great post, because it helped me to get this working.

  Rick

  Message edited by rick c 13/07/2009 22:57

• does not open to the home page

  Recently when I opened my firefox browser, whenever it does not open the home page. Instead, it opens to the last page I was on until I closed out of the browser. I tried to reinstall firefox, and that has not changed anything. I use windows 7.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

• Can I stop a new tab to open on my home page when I load Firefox to my office?

  When I load Mozilla Firefox my homepage loads OK but a new tab loads also with ' search or enter addresses in the space of the url where an address must be typed. When I click on the information on the general tab Page address for the new tab is chrome://ntsd-a/content/newtab/newtab.html. I don't want the new tab to load automatically. How can I stop this action?

  Enter about: preferences in your search bar and check to see what your home page. back to the just in case where. Restart firefox to check if the tab opens.

  Try firefox shift-click to launch. see if this tab always opens. If not, this means that there are a few add-on do this. Enter about: addons and see what addon could do that.
  If she does not always just clear the cache or refresh firefox it should be resolved.

• rather than open to my home page, Firefox opens according to the page it was when I closed the application

  Until yesterday, whenever I started Firefox, opened it to the home page I selected. During the day yesterday, has changed: now, when I open Firefox, it loads everything that was the last page, it was during the previous session. I checked the settings and the right address for my homepage still appears there. How can I get this "reset" so that whenever I open the app it loads the home page that I have chosen? Thanks for your help...

  Pat Ryan

  You are welcome

• Open to the home page

  Is it possible to configure the start and new pages on firefox for android tabs reopen a home page defined by the user rather than the new pages of the history/bookmarks?

  This time Firefox do not have this option.

• When I open a new tab, it opens to the home page. How to go to page newtab without defining page newtab as my homepage?

  I can't find anything under Tools > options for helping me change my tabs. The "tabs" section has only a few boxes. Where can I configure what a new tab opens up to?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Firefox opens with two home pages, my original PLUS the Firefox installed the update tab.

  Seems that my original homepage no longer works, if you want to change my home page. Firefox does not remember to put me in the new home page and continues to open with the homepage of old, of origin, as well as the Firefox update page. Weird, it doesn't on my computer that stays at home. Help?

  You may need to remove "user.js".

  You can find it in C:\Documents and Settings\user\AppData\Roaming\Mozilla\Firefox\Profiles\

  I think that there is another folder after profiles so you can end in there