Pre-treatment in the Source of the Message of BAM11g company

Similar Questions

• How can I get rid of the display of the message source in its entirety in incoming emails?

  I inadvertently changes made to options because all of the sources of message list in each incoming message. When I send a message to someone else, very much at the beginning of the message is occupied by the source of the message data. It's different on my other computer, where I did no changes. How can I get rid of this?

  Thank you
  TenthLine

  The menu bar, select View-Headers-Normal

  No menu bar display? Press the ALT key.

• source of the message appear on responses

  Messages suddenly started to display source X-key account information and any other ID of Message, User Agent, etc.
  and when I try to reply to a message it shows all the information of the source before the message. How can I hide all this information?

  View headers. the normal value instead of all

• All of my received emails suddenly changed to the 'Source of the Message' (no HTML) format. How to change their return?

  All of my emails has suddenly changed format in the 'Source of the Message' (no HTML) format. Upcoming new suddenly is back in HTML. Is it possible to convert the received messages to HTML?
  Example of one of them-

  Of the - Thu Feb 19 13:12:54 2015
  X key account: account 1
  X-UIDL: 0MFJMQ-1YIimi1UiS-00ETqm
  X-Mozilla-Status: 0001
  X-Mozilla-Status2: 00000000
  X-Mozilla-keys:
  Return-Path: bounce-857_HTML-206598685-987434-260085-83038@bounce.global.expediamail.com
  Received: from mta.quotitmail.com ([66.231.85.77]) by mx.perfora.net

  (mxeueus001) with ESMTPS (Nemesis) id 0MFJMQ-1YIimi1UiS-00ETqm for
  <[email protected]>; Thu, 19 Feb 2015 01:35:36 +0100
  

  DKIM signature: v = 1; a = rsa-sha1; c = relaxed/relaxed; s = 200608; d =expediamail.com;

  h=From:To:Subject:Date:MIME-Version:Reply-To:Message-ID:Content-Type:Content-Transfer-Encoding; [email protected];
  bh=fNo3DAi3AhVqqOOcWiTDUbWFywc=;
  b=N429V9jQXRGv6C7+5HaLPGqlcgG/TcpFOhv0/Qb8NzGYhs0ZsvLsSmpmxyKD/mdaFhGePrNUpaAP
    +jen5myxsUX3lbr064O2a21h66NUjMHB785XH0FEV6JKm3QdW1u+KHz0szgaxy1CtUSZQk3gjlP1
    MOo6DXu7PV0u0oEd77Q=
  

  Thank you

  Right click on the folder, select Properties, and then on the button repair.

  Be sure to create an exception in your anti-virus analyzes the Thunderbird profile folder.

• View e-mail Message Source without having to first open the message?

  To view an email Message Source in Thunderbird, the message must first be opened. It is a security risk, as well as embarrassing. Same Outlook Express allows you to view > Message Source without having to open it first. Is there a workaround or this function can it please be added?

  I think you're being too cautious but here's the wok around:
  the new msg - right click and choose Save as. (So you will not be pensionable in TB)
  Next step - open the msg recorded with a simple text editor. Voila.

  / Frans

• E-mail Security: 'Open' versus ' properties > details > Source of the Message'

  I receive e-mail as 'text only' and I have junk/malware filters of my e-mail service as well as filter for Windows Mail and Security Essentials but it sill of some messages that I have to think before opening/removal.

  The audit of these suspicious emails I often use properties > details > Source to have a look at the content of the Message.
  Is it really any more sure that simply open the email?

  Concerning
  Tom

  In my humble OPINION, you're being a bit paranoid. The days where everything just to open an email and have a virus or other malware infecting your machine are almost completed. There is always the possibility of infection when opening attachments or clicking on a link, of course. Web - bots to check that an address is real are still possible, but you won't see that in plain text, and I think that spammers almost gave up on it because they don't care whether the spam goes to a real address. It's just extra work.

  With respect to the verification of the source of the message, I guess we sleep, but it is also indicative of the source code if there is an attachment. I've been in the forums of e-mail since 2003 and back that up now, I don't remember anyone ever mentioning be infected simply by opening an e-mail.

  There are a few programs that will allow you to view your messages without opening them, but you'll have to Google that all the specific names escape me at the moment.

  You are much more likely to catch a Trojan horse or any other type of Malware, simply by using the Internet. If you do not have these programs in your arsenal, I highly recommend them.

  Download the free versions of these programs.

  Malwarebytes Anti-Malware
  http://Malwarebytes.org/

  SpywareBlaster
  http://download.CNET.com/SpywareBlaster/3000-8022_4-10196637.html

  Malwarebytes is the most important. The free version is not a real time protection, but if you get one of these Trojan horses masking as a Virus Scan that starts the download of the program and cannot be stopped, it will almost certainly remove it with a complete analysis. I run once a week just for kicks.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images?

  What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images? Missing images are not on my computer, but when the document opens the images are there. I can copy and paste the INDD images in Illustrator. Y files/images/I am able to copy and paste the images that have been incorporated into the INDD file in AI of the INDD file? If this is not what type of image am I copy and paste? Can I take the images that I stuck in there and place them in a new INDD document and have the images to reproduce without problems?

  The images could be anything - check the links Panel.

  What you see (and copy) is just the screen preview, not the actual image data.

• Move the message to the handler for pre-processing

  Hi all
  
  I'm moving sense of an event a pre-treatment post-treatment handler. The logic of treatment used the EntityManager to save the attribute, this is applicable to a prior process?
  Thank you
  Ron

  In a handler to pre-process the value added in the orchestration, for example orchestration.addParameter (, );

• Determine the source of a message (security roles?)

  I wonder, using JMS integrated possible to know the source of a message?
  
  I was hoping that the security roles was the answer
  
  The way I imagined that it is, I could install several roles for users who could connect to my queue and then when they send messages I could shoot some JMS attribute or the message header that tells me what role to which they belong.
  
  Thus, for example, that if a car dealer sends a message to my queue and the role of 'dealers' the user is that they connected to the queue, I can safely give their message that certain privileges on say a message from a consumer who has sent a message to my queue with a user belonging to the role "consumers"?
  
  Or do I need to create separate queues for this?

  nigeldeakin wrote:
  You can set properties defined by the user on a message before you send it. So you can define your own 'role' property and set it to any value you want. You can then define a consumer who uses a selector of messages for receive only messages with specific roles. There is no need to define a separate queue to do this.

  (if you are not familiar with the selectors message or message properties, look for them in the documentation)

  Nigel

  Even if this will definitely work, it seems too dangerous for me to the intended use. I mean, as a customer, you would basically be setting your own security role. Or am I missing the point here?

  I would like to make the client send the role AND a unique customer ID, so that the combination can be validated on the server. Then the role can indeed be used in a selector if necessary, but the customer not usurp any role because the combination control who will catch.

  But maybe what I mean, that's completely irrelevant and other security measures are already in place as the intellectual property blocks.

• Prevent the pre-treatment of missing values

  Is there a way to prevent the automatic preparation of missing values? I would like to see SVM handle them as part of his class in one-class-classification, but it seems to prepare all missing values with hope and fashion through the NVL operation. I think that this affects the ranking of future null values, since they can too. Or is the only way to get around this to feed the future null to the ranking algorithm with similar missing value treatment?
  
  Second thing: someone has a list of xform with ADP examples and create your own transforms for the manual or embedded pre-treatment? Example of the Oracle scripts have none.

  ODM has different interpretations for missing values. They are interpreted as missing at random when they are passed as scalar columns, and they are interpreted as lacking as sparse when passed as nested (for example, dm_nested_numericals). Intend it to match the expected semantics. If the table has a column called "AGE" that has NULL values inside, then ODM interpreter NULL values as unknown - missing at random. Some algorithms (for example, Naïve Bayes) can treat these values by ignoring them. Others need a different type of treatment. SVM will replace with average/mode, just as you mentioned. This behavior is correct if values are in fact unknown. This behavior runs even with ADP is not enabled because it is necessary for a correct interpretation of the data. If it has not been performed, SVM would naturally then treat these missing values as a coding for zero. Although this might be correct in some cases, the most common cases (as in the case of 'ÂGE' above) would lead to an erroneous interpretation. If the encoding with zero is the correct interpretation, the user must replace NULL with 0 (for example, using embedded data preparation) or move the column to a nested representation.
  When the model is marked, this same missing value is always processed (as it is not bound to ADP - this is a correct interpretation of the data). You don't need to do it manually - it is managed as part of the rating model.
  Let me know if that answers your concerns.

  For the second question, here's an example that combines treatment and ADP shipped. You can add the value of "NOPREP" for the argument optional fifth to set_transform to disable the ADP for this particular column during the incorporation of data preparation (in the case below, the embedded data prep is done, then the resulting value ADP).
  create table svm_set)
  setting_name varchar2 (30),
  setting_value varchar2 (30));
  Start
  insert into svm_set values ('PREP_AUTO', 'ON');
  Insert values (svm_set)
  (dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
  end;
  /
  commit;
  declare
  v_xlst dbms_data_mining_transform. LISTE_FICHIERS_TRANSFORMATION;
  Start
  dbms_data_mining_transform.set_transform (v_xlst,
  "YRS_RESIDENCE", NULL, 10 * YRS_RESIDENCE', ' (YRS_RESIDENCE/10 ');
  () dbms_data_mining.create_model
  Model_name-online "svm_adp_edp."
  mining_function-online dbms_data_mining.classification,
  data_table_name-online "mining_data_build_v."
  case_id_column_name-online "cust_id",.
  target_column_name-online "affinity_card."
  settings_table_name-online "svm_set."
  xform_list-online v_xlst);
  end;
  /

  ARI

• A new line appears in the messages I receive. There seems to be a line of links, including a Pointant URL to the source of msg (maybe). How can I get rid of him?

  On my messages incoming under my bars, & above the message header, is a new line. It sort of looks like another bar tools, but different. It reads from left to right, and each word is white highlight:

  Return before refresh URL: _ go

  Each of these words except for "URL:" are in boxes as if they are links, but they do not work as links.

  What is this and how do I get off it my incoming messages?

  Thank you, nanciewanda

  OK, you have a lot of Add-ons, I though I had loads, but I think that you beat me.

  You have the add-on Thundebirowse installed, I think that the elements are in the toolbar that provides.

  Tools menu > Add-ons and disable Thunderbrowse and I think they will disappear.

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Related to the previous question, I can SEND, but I receive a message that indicates the message failed to be saved under sent folder?

  Earlier, I posted a question of not being able to download new messages and in the Inbox tab indicates treatment with to solve them. I was wondering if I was still able to send, sent a test email. He sends (I confirmed by downloading the new email on gmail, but I get the message that TB could not save the message in the sent folder. All ideas are problems and if they are related?

  Yes, they are linked. Please just stick to one thread, it confuses the hell out of bunbos like me.

  I'll close it. Please post the picture in our other thread https://support.mozilla.org/en-US/questions/1068937

• I can't open FF and get the message: error: one is not defined

  FF does not, even if in safe mode. Under FF, I get an error with the message box ' error: one is not defined ' error info is
  "Source File: http://www.google.com/extern_js/f/CgJlbhICdXMrMFo4ACwrMA44ACwrMBc4ACwrMDw4ACwrMFE4ACwrMFk4ACwrMAo4AEBdmgICcHMsKzAWOAAsKzAZOAAsKzAlOAAsKzAqOAAsKzArOAAsKzA1OAAsKzBAOAAsKzBBOAAsKzBNOAAsKzBOOAAsKzBTOAAsKzBUOAAsKzBfOAAsKzBjOAAsKzBpOAAsKzB0OAAsKzAdOAAsKzBcOAAsKzAYOAAsgAI8kAI2/BFKlF3L_Vtk.js
  Line: 333 "
  What is the solution?

  • "Clear the Cache": Firefox > Preferences > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' sites causing problems: Firefox > Preferences > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Get the message - "Unable to create my object of security" when open My Safe

  Whenever I try to open the folder 'my safe' I get this message...

  Cannot create my safe view object.
  My chest cannot be unlocked, because its data file is currently in use or has just been used by another application. Unlocking cannot continue until the safe My data file is closed and removed from the cache files of the operating system. This is usually a temporary condition. Wait a few seconds and try again.

  Does anyone know how to do to solve this problem, or if someone has had this problem before?

  Hello

  I guess that any application that runs in the background OS possibly use my secure file and therefore, you get this message.

  I studied a bit and it seems that my Safe is part of protection as a result of the pre-installed software.
  I think that the software of fingerprints (part of the suite software Protect) need the My Safe secure file date of the user. This file you can import or export the Passport form.

  In my opinion, the fingerprint use my safe and it's why the message.
  Perhaps that the settings are saved only in the cache and that's why you should remove.

  Go to the properties of the HARD drive and on the general tab, you will find disk cleanup option. Run it and don't remove all of the necessary files.