Precise control of mixer

Similar Questions

• [Bug of LabVIEW report] 'Create all the constants' does not create a constant for the controls when mixed with flags

  The shortcut of the comics 'Create all the constants' cannot create a constant to a control when it is mixed with flags:

  

  Colors of the palette is a table control, the other two are indicators.

  

  results in:

  

  With the help of the 'constant to create' (which is something else altogether) works very well with the table control (of course, the constant is not connected to the Terminal in this case).

  Tested in LV 2016 64 bit on Windows 7

  You can change the functionality of the right click plugin by opening the Terminals_core.vi all the wires in the .llb following and by removing the structure of matter on the image below (keep remove it just method the structure around him). He did what you wanted in the original post, but is not very useful when you start to use it on items with multiple terminals (especially multiple output terminals). The code makes it seem quite expected, he travels all terminals it concludes and checks whether it is an input or output terminal. If it's an entry, it creates a constant, if it is an output, it does nothing. The change that I did just creates a constant whether it is an input or output.

  time Board \resource\plugins\PopupMenus\edit and diagram\Wire all Terminals.llb Unwired

  

• Feature Request: Precise control of the entered address AutoComplete

  I got caught by unexpected autocompletion several times. Of course, I'm responsible for the system of double-checking the recipient before sending, but it can be an easy mistake to make when in a hurry. I suggest allowing the user to customize the AutoComplete so that it matches their style of work better.

  Some issues I've noticed are:
  (i) multiple matches:
  'maggie' corresponds to:
  < [email protected] > (corresponding to the address)
  Maggie Surname < [email protected] > (corresponding to the name)

  "ad" is:
  ADA name < [email protected] >
  Allan Dyer < [email protected] >

  (II) end unexpected:
  With 'automatically add outbound e-mail addresses to my collected addresses"turned on, you reply to a message will add the address in the address book, but the user may not be aware of the real e-mail, or the conflicts it causes with existing addresses in the address book. The user types a fragment that previously only had a single game and sends the message before realizing there was a new selected correspondence.

  Additional controls, I suggest:

  Name / address function / game name or address

  Include / exclude option for each address book
  Reason: The user can select which group of contacts is used to auto-complete. If the collected addresses is excluded by default, then there is less chance of an unexpected AutoComplete.

  Minimum match length (characters)
  Reason: One or two character matches are much more likely to have accidental encounters.

  Thank you.

  Thank you agdyer for your great suggesion. It'll be a great feature. Watch our dev team he's.

• Double digital precision control using the D:H:M format has problem increment/decrement

  I have a VI that allows users to define the range of dates in a control, and it does not work as it should.  Specifically, the control is the standard digital control of the modern palette, this is the data type is Double, and it is in the format % <%D:%H:%M> t.  The problem is that when I have the cursor in the hours (two digits highlighted), when I use the keyboard keys arrow up and down or buttons increase/decrease control, instead of the increment or decrement, the minutes.  When I have the cursor over the days, the inc/dec intervenes on the hours.  Has no way to increase/decrease the days in the control either.  In addition, if the cursor the cursor in the line rather than a selection, changing values are the values to the right of the cursor on the line - even the opposite of the features of LabVIEW with other digital formats.

  In addition, the left-right arrow keys won't move the selection / cursor in the control, except to spend hours to days - no other movement is possible.

  Is this a known issue?  I'm the see in 2010 SP1 and LV LV 2012

  I have attached a VI composed solely of misconduct control.

  In addition, I tried digital controls system palettes, classic and Express and they do the same thing (or worse).

  I guess at this point, I'll need to use separate controls for each field, the event handlers for the arrows, etc., but the complexity which adds is almost painful.  If anyone has another idea, I'm all ears.

  Thank you,

  Erik

  took an hour and built a work around for the problem.  No was not as bad as I thought originally that are curious differences between the Terminal command, local variables and value - namely, the Value property is the value after the event, while others have the value of pre-event for the control.  This always works for my application.

  This version is in LV 2010 SP1, which is as far as I can go.

• Precise control of the position of the arrow

  Somehow, I just can't control position arrow to fine resolution. When I try to drag the end of an arrow, it always changes by a great distance (say 1 cm). It seems that the end should be on a grid. Is there an option in acrobat to change this?

  View > snap to grid (deselect)

• Sum of manual control, producing mixed results

  I got a checksum in a header after process for a page of givien via the code below. In a process of the page 'after send', I do the same checksum calculation and comparison with the previously saved item (P10_CHECKSUM) and mingle results for 2 scenarios. In the first case, there is no checksum violations while in the second case, there is a breach (pre and post of checksums do not match). In both cases, the database not touched. Why do I get different results for the same amount of control call, when the database has never touched? Is the code to get the incorrect checksum?
  
  
  declare
  l_cks wwv_flow_global.vc_arr2;
  Start
  Select wwv_flow_item.md5 (Field1, Field2, field3...
  ) cks
  BULK COLLECT INTO
  l_cks
  of atf_header
  where atf_header_id =: p10_ATF_HEADER_ID;
  
  : P10_CHECKSUM: = l_cks (1);
  end;
  
  Alex

  Contrary to what you said earlier, you alter the database session to set the date format. I copied the application before header 'set nls vars' conducted a new who runs after - submit. Now everything works. Also, contrary to what you said earlier, you have three date columns in the query. The problems concerning the registration of 20001 were tc_travel_start and tc_travel_end which are not null in this folder, but nothing in the record of 20,000.

  Scott

• Precise control of the crop tool

  I use Photoshop Elements 9 on Mac OS 10.7.2. Is there a way to fine-tune the crop tool movement? When a phot of culture, the culture box seems to jump by one pixel. Is there a button I can key crop that will allow a fluid movement?

  You should be able to hold the command key to prevent the crop tool to slam on the edge of the document.

  MTSTUNER

• SDO_ORDINATE_ARRAY precision control

  Dear all,
  
  Greetings.
  
  Hello.
  
  I met a problem dealing with storing the geometry with correct values SDO_ORDINATES accuracy. When I download the geometries in Oracle, I had chosen FME (software does convert and automatically download data.) BUT when I export the ordinates of geometry to the other calculations or analysis programs, I found the details for each point of contact information is too many (I really useless that much, in addition, he has problems for floating numbers calculations.) For example, the lat/long value would be 10.0000000000000001 / 20.0000000000.
  
  In the other program, I cut the data without these numbers a lot, but I also need to refer to the database, and there are already some lost data. I would like to have the data cut into the database once I have download the data in oracle. I can't find a feature or command so far, / of the FME or the documents of the oracle. Everyone knew this, please leave me your comments. Thanks in advance.
  
  
  
  Kind regards
  Jun

  You can do it in FME using the [CoordinateRounder | http://docs.safe.com/fme/html/Transformers/content/transformers/coordinaterounder.htm] transformer.

  There is no function available in planning to do, but its pretty simple to do. Here is an example of a function:

  CREATE OR REPLACE Function Round_Coordinates(p_geometry IN MDSYS.SDO_GEOMETRY, p_tolerance IN NUMBER)
      RETURN MDSYS.SDO_GEOMETRY
      IS
       v_dim            number;
       v_gtype          number;
       v_geometry       mdsys.sdo_geometry := p_geometry;
       v_ordinates      mdsys.sdo_ordinate_array;
       v_round_factor number;
  Begin
  
      v_gtype := Mod(p_geometry.sdo_gtype,10);
      v_dim :=  SUBSTR(p_geometry.sdo_gtype,1,1);
      v_ordinates := p_geometry.sdo_ordinates;            
  
      -- Compute rounding factors
      v_round_factor := round(log(10,(1/p_tolerance)/2));
  
      -- If point update differently to other shapes...
      IF ( v_geometry.sdo_point is not null ) Then
        v_geometry.sdo_point.X := round(v_geometry.sdo_point.x, v_round_factor);
        v_geometry.sdo_point.Y := round(v_geometry.sdo_point.y, v_round_factor);
        If v_dim > 2 Then
          v_geometry.sdo_point.z := round(v_geometry.sdo_point.z, v_round_factor);
        End If;
      END IF;
  
      IF ( v_gtype <> 1 ) THEN
           FOR i in v_ordinates.FIRST..v_ordinates.LAST LOOP
                v_ordinates(i) := round(v_ordinates(i), v_round_factor);
            END LOOP;
       END IF;
  
      RETURN mdsys.sdo_geometry(v_geometry.sdo_gtype,
                                v_geometry.sdo_srid,
                                v_geometry.sdo_point,
                                v_geometry.sdo_elem_info,
                                v_ordinates);
  END Round_Coordinates;
  /
  

• How to use the Tablet 3 rd-Party controls (what?)

  Hello, I am new to hearing CS6. I have a Google Nexus 7 Tablet. I would use it for the mixture, but I don't know what 3rd party programs are compatible with the hearing CS6 looks that Adobe does not promote everything on the site, just refferes to them as programs 3rd party. I have creative cloud if that helps.

  Lucaro71 wrote:

  Hello, I am new to hearing CS6. I have a Google Nexus 7 Tablet. I would use it for mixing...

  Hmm... I'll make a suggestion that you don't like... and it's that you get used to hearing and he can do by using a mouse before you think of any form of control of the tablet - that is assuming you can do work at all (which wasn't easy), but...

  It goes like this: I did some experiments with a Tablet and hearing all the time, and I have to say that using such a mixer is less satisfactory - there are delays, and there is absolutely no subtlety on this at all. You spend a lot of time trying to make sure that your fingers are in the right place - and at the same time, of neccessity, must be addressed on the hearing screen - so effectively that you watch two screens at the same time. And that slows you down - a lot.

  What is rather better is to use a kind of remote control surface that has real faders - these are much easier to locate, and because you get the tactile feedback, everything is much more accurate. They are available, and they work fine. Mackie make a very nice...

  The thing the whole tablet, in which case the hearing, is nothing more than a gimmick. They have an audio of any use at all, you may be wondering? Well, there is at least one scenario where they are coming into their own, and it's like PA remotes. If you have a small jury rig PA for your group, using one of them you can set levels from a distance, without using a mixer remotely and the associated snake. And you can test it in several places in the room, too. And for this kind of application, this level of control is very good. But regarding the mixing table with precision control of hearing - quite frankly, as I fear, forget about it.

  And the reason why I proposed learning all about what hearing is capable with a mouse in the first place, is that when you get finally play with a Tablet, you'll realize exactly how much control you have lost, fairly quickly.

• Control blocks the Satellite A200 - 14 d: Volume

  Hello!

  The problem I encounter is quite difficult and seemingly without solution (have unformatted disk still).
  Whenever I open the Vista (home edition X 32) on my Satellite A200 - 14 d, things go as usual. I hear the sound. But when I try to adjust the volume with the volume button, it locks up: sometimes all taskbar, sometimes the computer (even if the mouse is moved, and it meets the ctr-alt-del).

  In the second situation I can access and the Internet, for example, with the special button, but what you know - do not type anything. When only the bar spots are block, I can use explore or internet, but if I reduce a window there is only more to do anything. If when she is completely blocked I enter the Task Manager, it does not work. A solution is to disconnect, and when I go home is as it was before, but with the same risk.

  What I tried:
  -J' uninstalled the drivers Realtek, up-to-date with the latest version - the same
  -J' deleted the remaining drivers used by the device and reinstalled with the new drivers - the same
  -J' scanned for virus, nothing
  -J' did all updates for windows etc.

  When I turn off the device, it is all good.
  A fact is that I can control the mixer in its control panel, sound and I can hear it and when the computer is blocked, so there is a software problem.
  I have seen that in some cases, when I turn off the sound, it appears the blue screen. It is said that a problem is in my Realtek sys files.

  What should I do next?  :|

  Hello

  Have you noticed that emits the first day after the purchase of laptop?

  There are many times I worked on the A200 and I really didn t notice these issues.

  Then maybe you should check if the same thing will happen after the restoration of the OS. Try to use the recovery CD and reset the phone to factory settings.

  This is necessary to know if it a software or hardware problem. If it s a hardware problem, you will need to contact the ASP in your country for the control.

  But if it s a software problem due to the bad influence of the 3rd party software then the new recovery procedure should help to sort.

  Best regards

• Oscillation of PID control

  Hello

  I have a loop of circulating water, and I control the temperature in the following way:

  The sensor is a thermistor bridge, this bridge is driven with an accuracy of 5V reference (http://www.voltagestandard.com/New_Products.html). The output of this bridge is connected to a nanovoltmeter Keithley 2182. My LabView PID control (I bought the PID toolkit) drives a current source Keithley 2400 which is connected to a water - air heat exchanger Peltier solid state. On the side of this heat exchanger air is at a controlled temperature of the cabinet (air temperature stability is +-0.02 Celsius). The thermistor Bridge gives a signal of 50 mV/Kelvin to the excitement of 5V.

  I have attached a photo where you can see measurement of a time data (sampling rate of 1 Hz). In general, I have a stability +-3rd-6 volt (standard deviation), which corresponds to the stability of Kelvin +-6-5.

  

  I've set this PID command with the Ziegler-Nicholes tuning protocol standard, then first that I brought the stable oscillation system, and I measured the ultimate period time (1.375 minutes), and the nec plus ultra (147). The table Z - N gave to these values the following PID parameters:

  P = 86.47

  I have 0,687 min =

  D = min 0,171

  Overall, I am satisfied with my temperature control, but I'm looking for advice how to remove the visible oscillatory effect. This oscillation has a period of about 30-40 minutes, as you can see in the picture.

  Is there something I could try to make my even more precise control? (it is also possible that I'm already at the possible gate given by the structural limits...)

  Thank you very much!

  Martins wrote:

  Is there something I could try to make my even more precise control? (it is also possible that I'm already at the possible gate given by the structural limits...)

  Can trace you to the output of the control loop (the value being written to the power source)? Specifically, draw out of the Keithley (if available), since the PID algorithm can output values with a finer resolution the Keithley can generate; Otherwise, around the PID output to match the resolution of the Keithley. See if the current alternates constantly between two specific output values, or if the output is continuously evolving during the swing.

  What I think is happening, is that you have reached the limit of resolution of the power source, in this case, it will be difficult to eliminate this oscillation using PID, because the current source cannot output the exact value that you would allow to maintain the equilibrium temperature. If it does, the output changes between the two values from the nearest exit of you and you will always have a swing. You can try to increase the full gain (reduce integration time) to see if you can get a faster response and reduce the amplitude of the oscillation, but the trade-off is perhaps more great overtaking when you change the set value.

• fine control "zoom."

  People - looking for a way to precisely control an image magnification in a container of Vision.  So far, I have only to find IMAQ WindZoom which seems to work only on windows outside and around a zoom factors of 1 to 16.  Considers that the image size window is fixed.

  Something similar to MS Word Zoom control where a zoom factor % can be specified is desired:

  

  Any thoughts?

  Thank you

  Don

  Vision display controls have a property called ZoomSingle which gives exactly the level of control you're looking for.

• Access control and security group

  Hi all

  I need to know about the access control and what data are suitable for the security group and roles if I have the script like this:

  i. There are 2 different app namely ARA (96 branches with different types of reports) and TRACS400 (6 branches with different types of reports)

  II al ' ARA, users of Branch01 can NOT check Branch02.

  III. different report type is measured by Branch01 and Branch02 are different.

  IV. in Branch01, there are some reports are Read (Cannot download) only and some reports are read and write (downloadable).

  My questions are:

  1. from the above scenario, do I need create all the 96 security group and assign it to different leadership roles?

  2. How can I control read and write access, as I have tested the READ access the user is still able to download the report.

  3. How can I control to branch 01, report Type A is a read and report Type B read and write access?

  4. I noticed that if I use the account, the security group can be used be limited to 50 only security groups. Is this good? I may be an application later in the future. These 2 request for test only. But if I do not use the account, there are any number of security groups that can be used?

  Appreciate for your help.

  Hi aziela

  As mentioned by the friends of the forum, it is advisable to have the minimum security group given that its impact on the scalability of the application (rule). Accounts provide the best security solution of dimension view group.

  Security group corresponds to the role, role is mapped to the users. The permissions are obtained at the level of role-SG.

  Accounts are mapped directly to users. So you can have a precise control at the level of the user (eliminating the abstraction of the role).

  All these aspects are impacting performance where rule of thumb is mentioned in the documentation. In general, if a user belongs to many groups and accounts then it will take more time to process the request of content for this user.

  w.r.t. prohibiting the read-only users so that they will not be able to download content, there is a setting, please try option mentioned in this link http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/e01_interface001.htm#CACCFHHA

  WRT performance calculation, see http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/c03_security003.htm#CSMSP143

  Hope this helps

• Message access control in the OSB proxy service when the Service Type is the Any SOAP Service

  Hello

  We have a proxy OSB service where the Service Type is 'no matter what SOAP Service'. We use Auth.xml to authenticate messages to achieve this proxy service.

  It is, ca we apply Message this proxy access control so that only user A is allowed to sent message has and only user B is allowed to message sent B?

  Us know if the proxy OSB service is based on a wsdl, then we can apply access control message for each operation in the Security tab - and thus specify which user can access the operation. But unfortunately, we have not a wsdl, because this service proxy is a proxy gateway and must accept any SOAP message reaches.

  For example, if the user name in the SOAP header is msgAUser, get is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgAUser< / wsse:Username >

  < wsse:Password >msgApwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <Get>

  ...

  < /Get>

  < / soapenv:Body >

  < / soapenv:Envelope >

  If the user name in the SOAP header is msgBUser, then MessageB is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgBUser< / wsse:Username >

  < wsse:Password >msgBpwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <MessageB>

  ...

  < /MessageB>

  < / soapenv:Body >

  < / soapenv:Envelope >

  Any suggestions please?

  Understood.

  My current client, we have faced the same problem and implemented a similar design which nevertheless has important benefits.

  The problem with proxy input all SOAP is not only in the complexities of authentication. Most important, resources fine grain (thread) management becomes impossible: proxy entry has a workmanager, one constraint of son max. If any single service behind entered proxy knows an influx of requests (because of a peak or a misconfigured customer), he eats the workmanager dry and the rest of the services become too inadmissible.

  In this spirit, we have implemented the following diagram. It's a little more complicated, but it serves us well for a few years already:

  EntryProxy 1-> Interceptor entering Proxy-> Proxy 1

  EntryProxy 2-> Interceptor entering Proxy-> Proxy 2

  ...

  Enter proxy doesn't do Nothing but shall forward the request for interception of incoming traffic. Power of Attorney of the entry, however, has its own WSDL, authentication and the workmanager which allows precise control.

  Another important aspect of a proxy of the entry, it is that it passes a custom header containing the name of the destination of the interceptor, e.g. TargetURI = "ProxyService/Paypal/Paypal.

  Incoming Interceptor Proxy performs all recording, the error handling and other common tasks.

  Then, according to the last header, the proxy of the interceptor makes a dynamic call to route to the specified destination.

  Yes, this design has an additional moving part - a proxy entry - but he a) works b) guard control all in our hands. The entry proxy is a very small point; When I need to make a new one, I just copy an existing one and replace the WSDL file and the value of the TargetURI - 30 seconds of work.

  Hope that helps.

  Vlad

  http://vladimirdyuzhev.com

• How can I make the more precise and less smooth pencil tool?

  Ive moved the slider of fidelity to "specific", but the lines are always really smooth. I need a line in stairs with several anchor points, but do not see this option in illustrator CS6. Thank you!

  Hello Jimi,

  Looks like you are using Adobe Illustrator CC and not AICS6. AICC had introduced these controls as stated in your pencil tool dialog box. Please upgrade to the AICC 2014 of Ai version where you could see an additional parameter for more precise controls.

  Take a look at the tools pencil AICC 2014 dialog:

  

  There are now 5 ticks instead of 4 in fidelity. The leftmost is accurate is the new control added to make things same as in AICS6.

  Thank you

  Dhirendra