Sum of manual control, producing mixed results

Similar Questions

• My iPhone is stuck in headset mode.  It's the THIRD phone that has had this problem.  Why Apple won't be a manual control of the headphone plug in the software?

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  doctortroyp wrote:

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  It is not common in the vast majority of users.

  If you wish to have a such feature manual control available, http://www.apple.com/feedback/ will be a good resource for this comments.

  Otherwise, try to restore your iPhone as new and not a backup test to see if the problem is back by restoring your backup on each of these phones.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• can't manual control zone schedule macbook air

  I have a Macbook Air with El Capitan 10.11.4 - I'm UNABLE to manually control zones. The time zone setting has "automatically detect zones" checked and it won't let me uncheck. " Anyone know how I can uncheck this? I operate in multiple time zones and have my Mac change on me is very confusing (just today a meeting was moving 5 hours - the exact time difference between the United Kingdom and new YORK, and here I am at 5 o'clock in the morning meeting).

  Thanks for the tips!

  When you say that you can't uncheck, do you mean because it is grayed out? If so, click on the padlock at the bottom of the window to activate the change.

  See you soon,.

  GB

• Please explain CVI question #335358: using the operator of bit-shift twice on the same line of code produces incorrect results

  Hello

  I just stumbled on http://www.ni.com/white-paper/12323/en#335358_by_Category.

  With the help of the bit-shift operator twice on the same line of code produces incorrect results.
  Workaround: Separate the operations of shift of two bits in two distinct lines of code.

  Reported Version: 9.0

  Solved Version: N/A

  Added the: 14/02/2012

  Could someone please explain what kind of construction causes such a question?

  I have not noticed problems again and not have not noticed or found a thread about it.

  Thank you.

  The reported scenario looks like this:

  unsigned int a = 1, b = 62;
  unsigned  long long result = 1ULL << a << b;
  

  The problem arises because of the temporary variable used when do two little is placed in the same line. This separation into two lines will produce correct results:

  unsigned int a = 1, b = 62;
  unsigned  long long result = 1ULL << a;
  result = result << b;
  

• A lost manual control of exposure in mode manual 5Dmk3

  Never changed the settings as far as I know. The day before I was shooting photos with full manual control in manual mode. I packed my camera and when I picked up once again, manual mode now behaves like automatic mode when you try to take pictures. It's self in the LiveView. I can see change LiveView as I move the camera around and I can't change the ISO or the opening of the exhibition. I can make up the ISO menu and select different ISOs, but the image does not change. When I turn the steering wheel opening command, the f-stop on the screen number changes, but in the lens blades do not move and nothing changes.

  I still have a manual control total when I switch video mode, this happens only in photo mode.

  Here's a short video that shows the issue I'm having.

  http://youtu.be/kQN-H2Qwsu4

  EDIT: Just noticed something. It seems that the device will take the image with the settings I chose, but will not display what looks like this exhibition in the LiveView. When I enter the picture mode the opening wide stay open no matter what I do, I can look into the lens and see that the aperture blades are all open. If I put the opening to F10, exposure does not change in LiveView and the blades do not move, but when I press the shutter, the blades in place for a split second then take the photo to F10 and lance return back for large open. Same thing with the ISO. So I guess I still have manual control, but it is not very good for me if I saw what looks like this exhibition in the LiveView.

  ?

  The blades stay open until shooting. However, there is a way to stop down to see what things will look like without shooting. The depth of field Preview button is located on the side of the lens to the body almost mounting area opposite the release button. . According to my manual is downloaded, it is covered by the news on page 165.

• Windows Update could not produce the result page?

  Windows Update could not produce the result page.

  Hi RobertRaney,

  1. you receive an error message when you open Windows Update?

  2. have you done any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Hope the helps of information.

• Running Fortran under Windows 7 code produces different results each time.

  I run a FORTRAN code in windows 7 and it produce different results for different courses. Is this a problem of floating point or what? Is there anyone who knows a way to overcome this problem?

  original title: Code Fortran

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the MSDN Windows 7 forum.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• [Bug of LabVIEW report] 'Create all the constants' does not create a constant for the controls when mixed with flags

  The shortcut of the comics 'Create all the constants' cannot create a constant to a control when it is mixed with flags:

  

  Colors of the palette is a table control, the other two are indicators.

  

  results in:

  

  With the help of the 'constant to create' (which is something else altogether) works very well with the table control (of course, the constant is not connected to the Terminal in this case).

  Tested in LV 2016 64 bit on Windows 7

  You can change the functionality of the right click plugin by opening the Terminals_core.vi all the wires in the .llb following and by removing the structure of matter on the image below (keep remove it just method the structure around him). He did what you wanted in the original post, but is not very useful when you start to use it on items with multiple terminals (especially multiple output terminals). The code makes it seem quite expected, he travels all terminals it concludes and checks whether it is an input or output terminal. If it's an entry, it creates a constant, if it is an output, it does nothing. The change that I did just creates a constant whether it is an input or output.

  time Board \resource\plugins\PopupMenus\edit and diagram\Wire all Terminals.llb Unwired

  

• Precise control of mixer

  Hello

  I wonder, is it possible to precisely drag/move/move and knobs in Logic Pro X mixer? I mean that normally if you click and hold the slider and make it slide simultaneously works normally. But as I remember in other DAWs method with using the key 'control', or 'command' or something like that and that didn't exist by dragging the sliders is very slow with accuracy.

  But I can't find this option in Logic Pro. Could you help me? Thanks in advance for any help.

  I'm sorry for the stupid question, I would never ask for such a thing in the forum, but I really just spend an hour to find the answer in google. Without doubt, I used the wrong keywords, but I tried a lot of things and found nothing that helps me. So maybe you could help me?

  "Hold the SHIFT key while dragging the Volume knob to change the volume level of the finer increments"

  http://help.Apple.com/LogicPro/Mac/10.2.3/#/lgcp8ec34eec

• Increment the value of the control programmatically, strange result

  I have a problem with this VI.
  I did it with LV 2009.
  There is an auxiliary VI that I use to remove the reference to a control programmatically.
  The test.vi (main) tries to set increment to a digital-digital control programmatically.
  With the help of the 'heap of ctrl VI', it is possible to do all the code in a single case of big event.

  If you change multiplier 'n'--> he grabs value 'n', for N = 1, 2, 3,..., 7
  It takes the value of N the multiplier and checks if it is == 1. Then the value increment of the N value accordingly.

  Problem:
  It does not work as expected.
  If you explore the thread, it's all good until the equal check, I don't understand why it does not work.

  Thanks for your advice.
  Greetings

  The problem is probably not full equality of types of data comparison.  As fractions like 0.1 cannot be represented exactly in binary, is often equal to comparisons result in numbers that appear to be equal when displayed with one decimal place are actually different in the 14th, 15th or 16th place.

  Use a rough comparison: is the absolute value of the difference of less than 10 ^-14?

  Lynn

• In the Windows Explorer search produces no results in Windows 7.0.

  When I open Windows Explorer in any folder and type the name of a file to search in the right corner it lists nothing, no matter what I put in the words.  In Vista, it would begin listing the files immediately I typed.  Strangely, lookups work if I type in the same search in the start menu.  I tried to turn on or turn off the search.  I also ran the program in troublehooting control menu and he said that there is nothing wrong with my computer.

  It's very frustrating.

  Jonathan

  When searching for a folder, it searches only in this folder (and any folders below it).  The start menu search everywhere, all the time.

  Try 'Computer' or your C: drive and then research, and it should come with the same results as the start menu.

  PS It's Windows 7, but the version number is actually 6.1, not 7.0.  The 7 is just a name (and poorly designed, when it does not match the lol, version number).

  If this was helpful, please vote. If it solves the problem, please click on propose as answer. Thank you!

• Manual control of charging battery for notebook

  Hello, is it possible to manually disable my laptop in charge battery?

  What I want to do is to store 100% charged the battery on the laptop, but they have the laptop powered only via the AC charger. It is important that the laptop is trying to charge the battery at any time while in use without determined action from me. The operating system is windows 7. I realize that this question may seem without purpose more, but if it is possible to keep the battery installed on the laptop using the AC charger only using the software, it would be great. I read that the ACPI Microsoft control battery method, in the Device Manager can be disabled, but what I've read, I'm not sure whether this action will be enough. I would be grateful if someone is able to answer this question. Thank you very much

  What power is supplied to the system of the laptop works on AC power because the battery voltage will be slightly lower than the AC voltage. However, the power supply can trickle charge the battery at all times even if it is less frequent.

  What tends to happen in practice is when the laptop is 1st turned on even with essentially a completely charged battery some load will take place. This is necessary in order to confirm that the battery is actually charged, the charge current indicates the battery status much better the just measure the voltage.

  The degree of control available to the operating system is very limited with it first and foremost a function of portable electronics (it still applies even if you do not pass).

• Hypens - manual control

  How is - a substitute automatic hyphenation and control exactly where dashes are used? I realize it is possible to add a hyphen manually character, but he prefers to select text and say ID to cut off instead of my choice. Can do something like this?

  Side note: I work with a German text that does not auto-unhappy (short paragraphs continue to take 3-4 hyphens when auto-unhappy is set to less than maximum number and the mouse a notch in the far right slider).

  Owen

  Luca

  Luca del carlo wrote:

  I work with a German text that does not auto-unhappy (short paragraphs continue to take 3-4 hyphens when auto-unhappy is set to less than maximum number and the mouse a notch in the far right slider).

  It's strange behavior, not that I've met so far, then you will want to check if (a) those paragraphs have the correctly applied hyphenation settings and (b) the economy as IDML and re-loading solves. My personal experience is that most reported problems with the hyphenation in InDesign are picnic (problem in Chair not in computer) - i.o.w., a user error. Here again, some problems are specific to InDesign. Check both, please.

  In the meantime:

  ... [I] prefer to select text and say ID to cut off instead of my choice.

  You can add any word you want, a hyphen just the way you like it, ID own dictionary. http://help.adobe.com/en_US/InCopy/CS/using/WSa285fff53dea4f8617383751001ea8cb3f-7260a.htm l #WSa285fff53dea4f8617383751001ea8cb3f-6f4da

  I know this isn't a parameter "by choice", but this is not possible. You add a Word and it is used as such.

  How is - a substitute automatic hyphenation and control exactly where dashes are used? I realize it is possible to add a hyphen manually character

  You can manually insert a break in any word, and InDesign will not ignore its rules of hyphenation integrated and use only breakpoints that you insert.

  http://help.Adobe.com/en_US/InCopy/CS/using/WSa285fff53dea4f8617383751001ea8cb3f-6d98a.htm l #WSa285fff53dea4f8617383751001ea8cb3f-6d93a

• "The eigenvalues and the vectors.vi" produce different results in BT 7.0 and 8.0

  I noticed that 'clean and vectors.vi values' product of different results when it is used in LV8.0 and LV7.0.

  The attached VI is saved in LV7.0.  The default values show the results by operating this VI in LV7.0.

  Using the same entries, try running this VI in 8.0 and you will see the results change.

  Someone has any ideas why this is happening?

  
  

• sum of series control is not not to

  I'll put up a VI to communicate with a device of air data. It communicates via RS - 232 with a string output that contains all data relevant, followed by a checksum, carriage return and line feed. An example of the output string is lower.

  094904104 111115, 0000.00 + 00.00, + 00.00, + 00106, 100051, 0100051, 33

  The documentation for the device has this to say on the calculation of the checksum. "The calculation of the checksum includes all characters and spaces except the return trolley/line flow of the characters and the checksum itself." The way I decided to calculate the checksum was to convert the output of a byte array and islolate string the first 69 bytes, i.e. all characters up to the amount of control (including the space that precedes) and then add the elements of the array.  It does not get me a checksum that matches reported. I don't know if I make a mistake in how I am to convert the string, or if the checksum calculation is more complicated. It's my first real attempt of serial communication so I hope I'm just a stupid mistake.  I'm guessing there are a few nuances about how one calculates a checksum that I must be missing.

  I have attached a simple vi takes the message string, which makes my calculation of checksum on it.

  His is a checksum XOR 1 byte as I suspected. The 33 is in HEXADECIMAL (decimal 51).

  The beauty of this method is a simple device as a microcontroller can:

  (1) receive the entire string, including the XOR checksum.

  (2) XOR all bytes set, including the checksum.

  (3) check that this calculation = 0

  If it is equal to zero the package is good for nothing function XOR with himself = 0.

  On a side note, LRC plans like this can have several incorrect bits and still generate the correct checksum, so CRSC is generally better, but in any case, LRC is better than nothing.

  Deceased.