Predator G9-591-70XR - blue screen AV installation

Similar Questions

• Get windows error blue screen after installation Service

  I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

  I tried to install GO twice and got the same error.

  Awating for your valuable review

  Hi piZviZ,

  Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

  (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

  (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

  (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

  I recommend just update to the latest going TO if possible.

  Kind regards

  Joseph

• Predator G9 - 591 - 70XR RAM and M.2 SSD upgrade (how)

  

  Hi all

  This is what it looks like so low cover of my Acer Predator G9-591-70XR (Intel Core i7 6700HQ (2.60 GHz) GB DDR4 1 TB drive HARD 256 GB SSD NVIDIA GeForce GTX 16 980 M 4 GB 15.6 "Full HD 1920 x 1080 HD Webcam Windows 10 64-Bit edition). I want to improve my RAM and SSD drive. I discussed a couple of days to buy the right RAM for my machine with the acer predator support officer, but the officer was not able to give satisfactory answers to the RAM I want to buy. It's the RAM I would buy (http://www.gskill.com/en/product/f4-2133c15d-16grs). Agent told me that I need a RAM with the value of voltage of 1.5. However, this machine has DDR4 Rams and as far as I know that ddr4s have value of voltage of 1.2. So my first question is if I buy a RAM with latency CASE 15-15-15-36, 1, 2V, 2133 mHz in dual configuration channel, if it works with my computer?

  My second question is about the SSD m2. As you can see from the picture, there is already an installed (above), SSD intrinsically I see an another slot above, I think it's a mini PCI-express. However this location is not consistent with the other SSD location. It's a little to the right. If I buy a card SSD M.2 similar or shorter, where screws it? There seems to be an empty hole on the left side, but the SSD will not reach there. So is there an adapter for it? If yes where can I find one?

  Thank you for your time to read this. I hope that someone has the answers. Wish you all the best.

  Hello

  I'm not all specialist RAM. I'm just, went to the store and asked the guy for a quick DDR4 Ram. But as you can see also delivered Ram 1, 2V. Maybe this value they're talking about is different. ?

  Works fine since I bought the fastest Kingston. I wonder why the unit is shipped with the slower Ram, if more?

  

  

  

• Blue screen during installation of Windows XP on HP touchsmart 7320

  I have a HP touchsmart 7320 with Windows 7 Professional 64-bit pre-installed.

  I have to install Windows XP (32 bit) next to Windows 7, so that I can run a costly professional application which meets the incompatibility issues with Windows 7.

  Compatibility mode makes no difference. Virtual PC and XP mode are broken during the installation of the application. So its a way for me to have a dual-boot with Windows 7 ande Windows XP machine.

  When I am installing Windows XP (all versions-family, professional, 32 or 64-bit with original CD always) gives a blue screen with strange characters and the following STOP message:

  | STOP 0X0000007E
  
  (0xc0000005, 0xf748e0bf, 0xf78da208, 0xf78d9f08)
  
  PCI.sys - address f748e0bf base at f7487000 datestamp 36d855c

  I did a new Windows XP installation CD using nLite, "slipstreaming" of Service Pack 2 and AHCI SATA drivers I found here and they are proposed by this guide.

  That seems to work for awhile, because the installation process went further. It passes the point where she was already giving the blue screen, but it gives blue screen in a later stage of the installation process and one other STOP message which is now:

  Hello:

  I have another solution for you.

  First, go to your Windows 7 installation and in Device Manager, click on IDE ATA/ATAPI controllers section.

  Please confirm that you have the Intel (r) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.

  If it's not the ACHI SATA controller you have, thanks for posting what you have.

  Now, here is another method to install XP.

  Go into your BIOS. Go to the menu of storage options. Change your SATA of ACHI to IDE emulation mode. Save the configuration at this time by pressing the F10 key and save your settings again when you leave.

  Now XP must install.

  After XP is installed, please share back and I'll give you the instructions step by step to load the post SATA ACHI driver XP installation, so you can change your return to ACHI BIOS setting, so that you can dual boot your machine.

  Currently, only XP will start with the value IDE BIOS. With the ACHI BIOS value, only W7 will start. That's why we need to load the drivers for XP achi sata once you have it installed.

  I think that we can find all the XP drivers, you need to as well.

  Paul

• Blue screen during installation of Windows XP from loading

  Hello...
  I am trying to install windows xp professional...
  I'm starting the cd and when windows start to load the tool installation only a blue screen and I have to restart... I tried with another CD and did not work
  is that a block is not install an earlier version of windows media center?
  (my system is Windows XP media center (from recovery cd))

  TKS

  Hi Alex

  Please write us which model of laptop you have. You've improved some hardware components? Is an external device connected to your unit while you try to install the OS?

  Usually each laptop comes with WXP MCE can be preinstalled with Windows XP Home edition. The drivers are the same.

• HP PRO 3405 series MT * blue screen during installation *.

  Hello

  I tried to install Windows XP on this PC, but I get the blue screen during the installation. Instead, with windows 8 I can install.

  I need drive for controller? (F6 at startup)

  Hello:

  See if these drivers work.

  You will need a USB floppy drive to install on the line of F6. A USB flash drive does not work.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 4169006 & prodNameId = 4169007 & swEnvOID = 1093 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-74977-1

  Now you have to extract the real drivers, you must copy and paste to your floppy drive.

  Download the free 7-zip file and use it to extract the files in the exe file you downloaded above.

  http://7-zip.org/download.html

  After having extracted the file, you will find the drivers in the folder of the driver.

  Open this folder and copy and paste the drivers inside this folder on your floppy drive.

  If this does not work, go into the BIOS and change sata from AHCI to IDE emulation and install windows like that.

  Then try to manually install the driver sata ahci by a manual update of the drive controller in Device Manager.

  If you install, you restart and back emulation sata AHCI in the BIOS, so the hard drive works better it will be in IDE mode.

• Re: Satellite L450D - blue screen during installation of Windows XP

  Hi, laptop just out of warranty and the HARD drive was crushed, no return allowed ups recovery so don't not on the new HARD drive installation.

  I installed the new HARD drive and began to install XP. Implementation of process gets to the point where windows will write the files to the HARD drive and the blue screen appears! What is a SATA driver problem?

  Have tried with a copy of XP, I with the SATA drivers on it but don't know if it's a problem of controller or a specific driver from Toshiba.

  Any help would be appreciated... TIA

  Hey,.

  As you can read in 100 other discussions here in the forum, the problem is the SATA driver you need.
  As far as I know Satellite L450D a AMD chipset, so you can find the SATA driver in the display driver package that you can download from the official website of Toshiba.

  In addition, I would recommend reading the other discussions here in the forum. You can also read the son of other laptop models, it s always

• Satellite A300-1MX - blue screen after installation

  Hello
  I have a problem with the Installation of Windows XP. I set Compatibility Mode and everything.
  But at the end of the Installation comes the blue screen and windows stopped.
  "An important topic for the operating system stopped unexpectedly.

  I loaded the Toshiba SATA drivers, but they don t work.

  I put t know what to do, please help me.

  And please forgive me my bad English

  Grettings Infi38

  Hello!

  You need to install SATA drivers before you install Windows and if you have compatible SATA mode you t need SATA drivers but you have lost performance a bit.

  So I want to reinstall Windows in AHCI mode, you need to download the Toshiba Storage Manager (http://eu.computers.toshiba-europe.com).
  Copy the driver on an external floppy drive and press F6 after starting the laptop to CD or create your own installation with nLite (http://www.nliteos.com/) disc.

  Good bye

• Blue screen of Windows XP, the computer continues to restart, can't get into safe mode, will blue screen with installation as disk, can enter the CMOS?

  Restart Windows xp continues and in the end, the blue screen of death leaves the following error: 0X0000007B (0XF78D2524, 0XC0000034, 0x00000000, 0x00000000) can anyone help?

  If your machine is blue-screening after booting from the XP installation disk, it suggests that your problem is with the hardware rather than auto-run.

  I recommend taking your machine to a local service shop, unless you are confident enough rooting in the bowels of your computer.

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Blue screen during installation of Windows 7 - 0x0800700b7

  blue screen with this error in installing windows 7 on dell

  Is this a desktop or a laptop?

  You are upgrading from a previous version of Windows?

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Also:

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Satellite M70 - blue screen during installation of Windows XP

  Hello

  I bought a new M70 with Win XP HOME installed on it!
  but I want to install my Win XP PROFESSIONAL on the laptop.
  So I put in the CD WinXPpro and boot from the CD/DVD drive.
  The first blue screen with some information in the gray background of the line and every thing looks good, but the screen with the options on which drive I would install the windos OS is NOT COME!
  I have only a black screen and nothing happens!
  WinXPpro-CD is okay I checked it on other PC.

  hope you can help me quickly

  THX Houddy

  Hello

  I think I have a solution to your problem.
  The Satellite M70 was shipped with a SATA HDD and if you want to install the new OS you must first install the SATA drivers.

• Blue screen during installation of Windows XP on my Touchsmart TX2

  Hey guys.

  l am trying to install Windows XP on my new HP Touchsmart TX2, but the startup configuration every time l, the Tx2 stops with a blue screen when loading drivers. l tried with several discs, even those created with nLite and understood the SATA drivers, but nothing has worked.

  Does anyone else have this problem?

  Thank you

  Nightmare

  @Nightmare,

  You need to integrate your drivers Sata (only x 86 drivers) with nLite.

  Here are the Sata drivers for you. Just unRAR it drivers with Winrar. (This driver is different then what gave you Cheryl.)

  Here you will find the file .doc with guide how to integrate this with Windows XP Sata driver. (You will need to open the Microsoft Office).

  Here you will find the file with the same guide *.pdf . (You must open the Acrobat Reader software. Download link for this program here. Select your language and your system it.).

  Also, remember that you use at least version of WinXP SP2 . If you have not got the version SP2 here you can download this service pack and here you have a guide to how to integrate this with XP file written by nLite.

  In nLite, you can even burn your new XP CD with these changes.

  I hope this will solve your problem.

• Blue screen after installation KB2393802 / KB890830

  Windows 7 Ultimate

  I received today a handful of updates. He finished in a blue screen after reboot. Only with the restoration of the point system that I was able to start in the normal way of restoration. I installed every update one by one and was able to isolate the problem. Each of these two updates (KB2393802/KB890830) which brings back me to the blue screen. I also tried to download and install these updates manually, but had no success.

  My impression is also that other side to this problem if you for example search KB2393802 on google.

  Is it a known Microsoft issue and if there is a fix available for this?

  Any hint is appreciated.

  Cheers, mikeych

  Hello. Has been able to solve the problem. Update some hardware (e.g. video) drivers and the system once again stable. No more appeart to blue screen after installing the MS updates again.

• Predator G9-591-70XR - Audio output

  I recently bought a predator G9-591 with GTX 980 m graphics card. When I connect the laptop with my home theater system (which in turn conencts to a TV) via an HDMI cable, everything was great and the audio output is through output Audio Intel. But when I run the game, the sound doesn't come out of the Home Theater system more, according to the portable speaker.

  I guess it's because when I play the game, the phone goes from integrated graphics Intel at GTX980m. I couldn't find a Nvidia high definition Audio System output (both in the Strait and the Device Manager), Realtek (the speaker), and output Audio Intel (integrated graphics card I think).

  That is why I would ask that

  (1) is the GTX980m in the laptop has audio output function? If so, how can I activate it?

  (2) if not in above, can I connect my TV via the display Port and connect the Home Theater via HDMI, so using the display to the video signal output Port and HDMI for audio output signal? Would be the integrated graphics card Intel disabled when switched to GTX980m and not able to output audio?

  In light of the laptop is not S/PDIF output, I don't know he was looking for is a way I can output sound via a digital output channel 5.1.

  Thank you all for your response. I have re-solved the problem myself.

  Turns out that the graphics card of 980 m is attached to the output Display Port and integrated graphics Intel is set to HDMI output. I connected my Home Theatre to my laptop via display Port, which in turn connected to the TV, all is well again, and I can get 5.1 sound when playing games.

• Blue screen after installation of AOL

  After installing AOL, I get a Windows blue screen error

  6.0.6002.2.2.2.0.768.3

  1033

  BCCode 19

  BCP1 0000000000000020

  FFFFFA8005AC2A30 BCP2

  FFFFFA8005AC2A60 BCP3

  BCP4 000000000403000F

  6_0_6002 OS version

  2_0 SP

  Product 768_1

  Files helping to describe the problem

  C:\Windows\Minidump\Mini020411-03.dmp

  C:\Users\Betty\AppData\Local\Temp\Wer-46457-0.SysData.XML

  C:\Users\Betty\AppData\Local\Temp\Wer1380.tmp.version.txt

  Any ideas on a fix, uninstall us AOL all right. We are dile-up here

  Hello
   
  1. you install the version appropriate for your operating system?
   
  Check if this software is compatible with Windows Vista in the Windows Compatibility Web site .
   
  I would have you install AOL after you put your computer in a clean boot State. It is possible that a third-party software could be the culprit. Clean boot helps eliminate conflicts of third party software.
   
  Note: Follow step 7 to your computer as usual.
   
  If that does not solve the problem, the problem may be with the AOL software. I wish that you contact AOL support for better help.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]