Predator G9-591-70XR - Audio output

Similar Questions

• Predator G9 - 591 - 70XR RAM and M.2 SSD upgrade (how)

  

  Hi all

  This is what it looks like so low cover of my Acer Predator G9-591-70XR (Intel Core i7 6700HQ (2.60 GHz) GB DDR4 1 TB drive HARD 256 GB SSD NVIDIA GeForce GTX 16 980 M 4 GB 15.6 "Full HD 1920 x 1080 HD Webcam Windows 10 64-Bit edition). I want to improve my RAM and SSD drive. I discussed a couple of days to buy the right RAM for my machine with the acer predator support officer, but the officer was not able to give satisfactory answers to the RAM I want to buy. It's the RAM I would buy (http://www.gskill.com/en/product/f4-2133c15d-16grs). Agent told me that I need a RAM with the value of voltage of 1.5. However, this machine has DDR4 Rams and as far as I know that ddr4s have value of voltage of 1.2. So my first question is if I buy a RAM with latency CASE 15-15-15-36, 1, 2V, 2133 mHz in dual configuration channel, if it works with my computer?

  My second question is about the SSD m2. As you can see from the picture, there is already an installed (above), SSD intrinsically I see an another slot above, I think it's a mini PCI-express. However this location is not consistent with the other SSD location. It's a little to the right. If I buy a card SSD M.2 similar or shorter, where screws it? There seems to be an empty hole on the left side, but the SSD will not reach there. So is there an adapter for it? If yes where can I find one?

  Thank you for your time to read this. I hope that someone has the answers. Wish you all the best.

  Hello

  I'm not all specialist RAM. I'm just, went to the store and asked the guy for a quick DDR4 Ram. But as you can see also delivered Ram 1, 2V. Maybe this value they're talking about is different. ?

  Works fine since I bought the fastest Kingston. I wonder why the unit is shipped with the slower Ram, if more?

  

  

  

• Predator G9-591-70XR - blue screen AV installation

  My brand new laptop resuses to install no matter WHAT AV which integrates firewall protection. There seem to be a problem before the wifi and blue screens drivber system and I so need to use safe mode to remove the partial installation so that I can boot into windows 10. So far, I tried Eset Smart Security 9, Trend Micro, Kaspersky, etc.. All the crash on to halfway through at the start of the pilots. Everyone sees the same issue?

  HY,

  You can download the new killer networking drivers and try. They fix most of the accidents in the new driver

  Here u go http://www.killernetworking.com/support/driver-downloads

• How do I change Firefox's audio output device without restart the browser?

  I often switch between different headsets and speakers using USB audio devices. Whenever I change to another audio device, Firefox does not change its audio output to match my current camera. Other programs/games follow suit when I change my audio device by default and I don't really like should I exit Firefox completely and reopen it to my audio to come through the unit. It is not a huge problem, but when I have multiple windows and several tabs open, it can be annoying to have to restart my browsing session. Tips to deal with this problem?

  Thank you!

  Hello Qwelz, you can test if the problem is still reproducible in firefox 36 3 beta? It must contain a fix for this problem (bug 698079):
  https://www.Mozilla.org/Firefox/beta/

• Is there a way to have Firefox respects the audio output device by default when it has been modified while Firefox is open?

  I've been a Firefox user for many years and I still use it as my main browser. A problem that has bothered me for years lies in the fact that when Firefox is open and I change my audio output device by default, Firefox does not respect this change and continues to play audio through the device that was used to originally. Even if you stop the audio and keep playing, does not change the output device.

  Is there a way that this can be configured in Firefox? Now, if I listen to music online (e.g. Soundcloud) I always use Chrome because it is respect changing the default audio output even in the middle of audio playback device.

  Reproduce:

  1. start audio playback (for example a YouTube video; HTML5 and Flash are affected)
  2. change your audio output device by default
  3. audio will continue to play the original output device

  Thank you!

  Hello there is a bug open for that you can vote for: https://bugzilla.mozilla.org/show_bug.cgi?id=698079

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• No audio output device is installed

  audio does not work. When I take the pointer to the audio symbol in the taskbar, it reads "no audio output device is installed". pls help me solve this problem

  You upgrade to Windows 10 or was your system shipped with it?  If you can provide information about the system, I will be able to help you.

  In general, if you went you could look for drivers updated on www.hp.com/go/support in support and drivers to see if a new sound driver is available.

• WANTED m6 that no audio output device is installed

  Hi, I was looking at a CD on my m6 DESIRE last night and it worked fine.  Today, I have the speaker with a red icon in the lower right corner of the screen and when hovering over it says "no audio output device is installed".  I tried to uninstall the device driver, but that didn't fix it there.

  The driver for device "IDT High Definition Audio Codec" under sound, video and game in Device Manager controllers also has a yellow exclamation point.  When I uninstall and reboot, sometimes just with the yellow mark again.  If I try to upgrade the driver, I get an error message "Windows found driver software for your device, but has encountered an error trying to install it."  A device attached to the system does not work.

  Help...

  Installation of this driver fixed the problem: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = US & swItem = ob-109687-1 & jumpid = reg_r1002_usen_c-001_title_r0002

• How can I recover my software of audio output?

  I uninstalled my software of audio output by accident because a message came saying that a certain type of file couldn t run because of it so I uninstalled but I didn t know what it is that I uninstall and I put t know how to get back it or down load a new! Can anyone help?

  I have an Equium L300.

  It is normally a driver problem, in order to install the correct driver should do the trick. Please install audio driver for your laptop model. You can find it on the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads.

  By the way: do you have some unknown devices listed in Device Manager?

• P7-1430: p7-1430 windows desktop 8 is installed no audio output device

  I have no audio beats; IDT; or even audio outputs detected when I try to open the volume control.

  Hello:

  See if this windows 8.1 driver installation works for you...

  This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported.

  File name: sp67043.exe

• Satellite L500-01u012 - problems of audio output

  I have a Toshiba Satellite L500-01u012 and I have problems with the audio output.
  When I plug a headphone or audio output in the audio output port, it does not neutralize the internal Laptop speakers.
  It's really annoying me and I wonder if there is a way around this?

  I have windows 7 Home premium 64-bit sp1 with all the latest patches to update, and I tried to remove, restart and then reinstalling the driver several times without success
  I also got the image of the plant cell to try to fix that and its still nto work.

  I downloaded the drivers from the toshiba support site, but they did not help

  Hello

  Is this something new or you have noticed this problem in the past too?
  Generally by default the internal speakers should be turned off when you connect earphones.

  I put t know what laptop do you have exactly (model number you wrote may not be the right) and what sound card is inside, but please check the audio options in the Panel.

• Satellite T135-S1305 - no audio output device is installed

  Recently my laptop make some loud beep sound,

  The first time I just restart and it was OK but on the last time I restart and it also stopped but now the speaker near the clock symbol is signed with X and there is no sound, "no audio output device is installed".

  What can be? What should I do?

  THX.

  Hello

  Have you tried to install the audio driver?
  For the most part, there is a solution!

  Satellite T135-S1305 is a series of laptop Toshiba us.
  The driver can be found here:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  The Conexant audio driver installation should help you.
  Here is also a nice youtube video, but rather the Sigmatel driver you must use the Conexant driver
  http://www.YouTube.com/watch?v=9lZzBDkpWkk

• Satellite U300-152 - no audio output device is installed

  The sounds are works well when I do update windows, update antivirus and updated some software like adobe air and adobe shockwave but when I open the laptop the next morning, there is a red cross marked in the speaker icon on the lower right of the laptop and it says : "no audio output device is installed".

  I couldn't find the sound and game controller in Device Manager so I'm frustrated. Its been 3 days now, I use the laptop without noise.

  Can you please help me in this matter?

  My laptop is Toshiba Satellite U300-152
  Windows 7 Ultimate but not pre-installed (Vista Home has been the pre-installed)

  I tried to download the latest audio driver from realtek high defintion, but its still does not. Tried several restarts, System Restore, disable antivirus but does not yet.

  I don't know what can be the problem but the fact is that updates Windows update offers some drivers and, in general, you should not install their Mr. with other words, you should only use the drivers from Toshiba.

  What can you do now? Have you tried to reduce the OS to an earlier time (before installing updates) and check the functionality?

  One last thing. Software driver Sound should start with Windows, then please check MSCONFIG > startup if the sound software is listed and enabled it.

• Digital input to Toshiba 46TL-> no analog audio output to amplifier

  Hi all

  When I connect a video source (e.g. computer laptop via DLNA) to my 46TL, output TV audio analog (red/white taken connected to an amplifier) does not work.

  It does, however, watching television.

  Is it possible to configure the TV to read the audio data from digital input (HDMI/DLNA) to the analog output?

  Thank you for the help

  Not quite what series of TLxxx you have, but for example the TL938 supports a digital (optical) audio output port that provides a digital audio signal.
  Why n t connect the amplifier to the TV using this Jack?

  Connectors for component video / audio to the rear of the TV are the ports of ENTRY and not the OUTPUT ports. So, you can send an audio signal to the TV and not the amplifier output.

• Satellite T130 - 11 H - NO Audio output device is installed

  I brought this new * Toshiba T130 - 11 H Satellite * (Windows7 / x 64) last week and at first, it was fine...

  Although I now have the speaker icon formidable with a RED CROSS in the lower right of the screen!
  It's become such a pain now - ive never had a problem with the sound with one of the laptops ive had.
  The message error is always 'no Audio output device is installed."

  I have tried everything - system restore, reinstall everything, download different drivers... Pray!
  When going to the Control Panel/Device Manager / sound, video and game controllers - I do not see the:

  Intel(r) High Definition Audio HDMI

  I remember when I got it I got an another "HD Audio Device" in this category - it is the one which has totally gone now and is quite important what I do:

  Please PLEASE please can someone help!
  Is it a hardware failure?
  Is there something I need to download?
  Is there something special I need to

  Will be grateful for any comments. Thank you so so so much to read :)

  Hello

  Go to the Device Manager and in order to choose the hidden devices.
  Now you should see all the devices that are available on this system.

  Now go to the sound, video and game controllers and remove the Intel(r) High Definition Audio HDMI, audio Conexant high definition Smart, etc.

  In system devices, remove the Microsoft UAA Bus driver for high definition.

  Now, restart the laptop.

  After the new operating system reboot Windows should recognize all devices again.
  Check this box!

  If this does not download the Conexant audio driver and reinstall