Predefine FireSight Virtual Center of defence...

I'm looking for redundant configuration ASA5525-x firewall with IPS FireSight to my client.

I will be set up in advance in my area of lab (as well as other components of the project) and I want to assure you that I have questions to the production environment of the VCC time I install. In particular, I don't want to make it work in my lab and find that the permit has been invalidated because I put the VCC on another host/cluster of VMware.

What I intend to do, is put everything and activate the license on my host VMware test and export the VDC to an OVF for deployment in the production environment. So I expect to connect everything up and deploy the OVF as a fully functional guest.

Can anyone confirm that it is a valid procedure. I think it should be, but I won't be surprised when I'm in front of my client.

Thank you...

I said be a Cisco SE you can do. I haven't tried and have my doubts that it is always the case.

My reasoning is that a CME license key is derived from the MAC address of the server. There are some ways to move a virtual machine which do not transmit the original MAC address.

I could not test it, but I think that if MAC address the virtual machine changes, associated licenses is not valid.

An alternative is to export only the policies that you generate in the laboratory and install with licenses newly issued on the VM newly built in the customer environment.

Tags: Cisco Security

Notification of critical support quest product
Quest® vFoglight® 6.7 and Foglight® cartridge for VMware (all versions)

Problem

vFoglight 6.7 and cartridge Foglight for VMware (all versions) have a known problem with 5.1 vSphere environments where products fail to collect data.

How will this affect vFoglight 6.7 and cartridge Foglight for VMware?

Data collection of vSphere 5.1 causes an Invalid Argument exception associated with the collection of relationship and hierarchy in the VMware Agent which translates data not listed is not in the vFoglight / Foglight Management server.

Agent log contains the error messages below:
2012-09-14 14:10:18.422 ECHO ERROR [Quartz-1226] com.quest.agent.esx.task.RelationsTask - execution error: ERROR: null com.vmware.vim25.InvalidArgument
2012-09-14 14:10:18.422 com.quest.agent.esx.task.RelationsTask ECHO FATALE [Quartz-1226] - an unexpected error occurred when connecting to the VirtualCenter.

Please check your configuration of the agent in order to ensure a connection correct information has been entered.

Workaround

There is currently no work around for environments that have already been upgraded to vSphere 5.1.

Status

A defect in the product was filed as a VM-3207 and R & D work on a permanent solution.

Updates will be posted on the Support Portal in SOL97413knowledge base article. Once a permanent solution is released a follow-up notification will be sent.

Update:

We just released VMware 5.6.4.3 cartridge and it is an official release to support the virtual Center 5.1.

If you like this this link for more details information.

http://en.community.Dell.com/TechCenter/virtualization/infrastructure/f/4826/t/19558882

Concerning

-Lee

vFoglight 6.5 & multiple instances of Virtual Center

Hi all

Can someone help me to get rid of a version of Virtual Center vFoglight 6.5? We have two entries there are several virtual machines, data warehouses, etc... We recently had to re - build vCenter and I think that's when it started.

Thank you.

I think this is covered by this solution, just be careful because you can not revive a deleted object.

Note that in the most recent versions of Foglight, data management is under management server | Servers | Data instead of Foglight management | Servers | Data management.

https://support.quest.com/search/SolutionDetail.aspx?ID=SOL55723&category=solutions&SKB=1

Solution SOL55723

Title

We have a few old appearing in the agent Virtual centers VMWare drop-down list. How can I remove them?

Description of the problem

Question: We have some old virtual centers listed in the drop-down list VMWare agent. How can I remove them?

Cause

Resolution

Answer: You can delete old objects of Virtual Center since the "VMware model | VirtualCenters"section of the dashboard data management (Foglight |) Servers | Data management) in the console Foglight.

(1) navigate to the dashboard of data management (Foglight |) Servers | Data management) in the console Foglight.

(2) expand the "VMware model | Selections of VirtualCenters.

(3) remove the old unwanted objects Virtual Center by clicking on the Red sign icon next to them less.

Golan Shem-Tov

Quest Software

The traffic load between the power of Cisco ASA and FireSight Management Center fire

Hi all

I have a stupid question to ask.

Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

Maybe you all have no idea to provide.

It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

Generally it is not a heavy load, however.

Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

Hi Mallik7, please try the following steps, you must succeed to solve the problem.

To connect a client to vCenter directly to the ESX host error-free work.

Files/etc/vmware/config the ESX host contain the lines:

------------------------------------

authd.soapServer = 'TRUE '.

prefvmx.consolidateDeleteNFSLocks = "TRUE" authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

------------------------------------

This problem occurs when a carriage return is missing from/etc/vmware/config. To resolve this issue, go to edit/etc/vmware/config:

1 make a backup of this file from the path - / etc/vmware/config, by running the following command:

CP/etc/vmware/config/var/tmp /.

2. edit/etc/vmware/config so that there is a return transport after the line:

prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

While he reads the following:

---------------------------------------------

authd.soapServer = 'TRUE '.

prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

Authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

---------------------------------------------

3. restart the management agent spend.

Note: Make sure that you are not in your environment name resolution problems.

Virtual Center service

After the reboot, virtual center service does not start on its own. I don't face any problem while I start it manually. How to fix this?

Hello

To resolve this problem, add a dependency to the VirtualCenter service so that it starts only after the necessary services have started.

To create a service dependency:
1. Click Start > run, type services.msc and press ENTER.
2. Find all the services that vCenter Server requires. For example, SQLEXP_VIM, ADAM_VCMSDS or ADAM_VMwareVCMSDS.
  
  Note: the Service names are different from SQL Express and the full SQL implementations. For example, the name of the SQL Express service is SQLEXP_VIM and in complete SQL implementations, it is MSSQLSERVER.
3. Open the properties of the service and note the name of the service. For example, MSSQL$ SQLEXP_VIM.
4. Click Start > run, type regedit, and then click OK. The window of the Registry Editor opens.
5. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpxd.
6. Double-click the DependOnService key and add the Service name by using the name identified in step 4.
7. Close the Registry Editor window.
8. In the Services window, open the properties of the service to the service identified in step 3.
9. On the Dependencies tab, make sure that the VMware VirtualCenter service is registered as a function of the service.
10. Repeat steps 3-9 for all services that requires VirtualCenter.
If you are running Windows 2008 you can set the VMware VirtualCenter Server service to automatic startup (delayed) following type:
1. Click Start > run, type services.msc, and then click OK.
2. Right-click on the VMware VirtualCenter Server service, and then click Properties.
3. Change the automatic startup type Automatic (delay).

Considerations of Design for the U1 Virtual Center 6.0

I look at the deployment options in my environment and the plan initially to resist a LAB environment. I was looking at the possibility of defending the VCSA "LAB" with HA PSC behind and F5 load balancing. My question / concerns are I will be at a later date connect you to windows or virtual VCSA in this HA PSC environment? I know that you cannot mix windows and the PSC system, but I think that you should not have problems connecting a virtual center of windows to VCSA PSC? I hope that what I am asking is logical...

"vCenter Server Deployment Models" > "mixed operating system environment' > 'Eexample of a mixed environment of operating systems with a device of service of external platform controller' section of the documentation of vSphere 6 have answers to your question." " It goes the same for environmental HA PSC behind F5.

Is a new virtual Center required for deployment of Horizon view 6 / licensing issues

Hey all,.
Just curious to know if it is required or existing best practice to install a separate virtual Center for your environment from view of the Horizon, or if it is correct to attach it in your VC.
Also, reading that I've done, it seems that when you buy Horizon display 6 advances you get ESXi licenses as well? Is it true.
When it comes to the Windows 7 license you ave h to buy anything for your VDI VMware or do you just an open license / SA with Microsoft for Windows 7/8

I think the projections and business decisions will do that for you. Some circles have separate teams who manage desktop and server infrastructure. In these scenarios, you can have a dedicated instance for VDI and the office team. In other environments, you can be a small shop where a couple of technicians do everything. In this environment, it can be allowed to have a single vCenter. I still hate the TI depends on the answers, but in this case it really depends on your environment and how you want to manage.

2: based on the comparison on the site, all the editions come with vSphere and vCenter for desktop. I read you right, but I would check with a specialist VMware licenses.

3: Just that you have the licenses required in view and vSphere VMware wants. They do not all control over your Microsoft licenses.

Mutiple remove virtual computer in Virtual Center 5.1?

Does anyone know how to remove several virtual machines both in the virtual Center 5.1?
Looking for an easier way rather than a virtual computer to both research and removing one at a time.
I did a LOT of research with ZERO success.

Hi theire,.

so if I would have a very big amount of VM that I have to delete then I would with an input file and using powercli for quicker removal.

try following:

create the file vms.txt (and writing of the vm vertically)

Then, you can use following code as deletion for all virtual machines of this entry.

####################

to connect-viserver xxxxxx

$content = get-content "path to the file.

$vms = get - vm $content

{foreach ($vm to $vms)

Remove-VM $vm - DeletePermanently-confirm: $false

}

#####################

It's a very simple Code > you could also integrate some kind of loop until the VM is turned off,...

But in any case with Powercli I think delete is much more rapid then plu vi-client. equal to how the script looks like.

Best regards

Max

From Consiglio Aggiornamento 4.1 to 5.5 con nuovo material (stesso virtual center)

Buongiorno a tutti,
NEI mesi dovro'usare has the aggiornamento della mia infrastruttura vmware as dalla 4.1 went 5.5 o 5.1
Infrastruttura e formata da tre esxi 4.1 update3 che will be con sostituiti 3 nuovi host server. He Server Virtual Center invece continue ad essere current (W2008 R2 STD)
MI ero fatto UN idea nei passi da seguire, my I wanted UN parere da voi che siete più FSE.
1. He Aggiorno from Virtual Center 4.1 to 5.5 (non mi è chiaro to sono obbligato ad installare it componente SSO), dopo aggiornamento I miei 3 esxi 4.1 host continuano ad essere are ed andare dalla nuova versione 5.5
2. Ø new da zero sui tre nuovi host the new version 5.5 e faccio esxi him varies configurazioni di rete e storage
3. Sposto o magnobeam the machine virtual sul primo host 4.1 che voglio auswechseln
4. Rimuovo the spento dal Cluster host
5. Firstly it will accommodate 5.5 tramite al Cluster Virtual Center
6. Non potendo usare he vmotion (material different) magnobeam the first virtual machine ed effetto of beat.
7. Sul nuovo host effetto registrazioni delle virtul machine just to - register
8. Procedo con i punti da 3A 7 per i Tribunali host
9. Eseguo aggiornamento delle single virtual machine hardware
10. Aggiorno da file system it VMFS3 a che VMFS5 da quanto ho capito e possibile farlo anche con macchine accese.
Naturalmente prima di tutto cio, backup di all the macchine con e dei, del Virtual Center database.
Grazie

Ho solved it problema era the host name. Funziona tutto Adesso!

Problemas con el acceso al Web Virtual Center.

Hola.
A few days ago it wont a HA cluster y DRS con VSphere 5.5.
Al accedia desde el VC client antiguo y desde el web client. To repent, web client el not me works, desde el Internet Explorer cuando lo lanzo solo salen unos 4 o 5 cuadraditos in el margen superior izquierdo. Y no hace nada puedo mas.
Sin embargo, desde el antiguo, sigo accediendo client y release that works well-todo. Parece solo falla the part Web, pero como esta tiene na what I need y no tiene el otro client.
El Mirador of He Virtual Center, y parece than tiene todos los servicios VC p.. Además he probado back veces is a reiniciarlo y nada...
Gracias, cordially.

Buenas tardes compañero.

Por favor, checks that estas colocando el protocolo correcto "https"

The direccion del browser has ser del tipo https://X.X.X.X:9443 /

Checks also as el servicio VMware vSphere web Client implies, o reiniciarlo prueba este.

You can test con otro explorador, o puedes esta test KB:

http://KB.VMware.com/kb/2031809

Put 5 cents.

Cordial greetings,

Beyond the performance data not available to a host through Virtual Center

Hello
I have an ESXi host that relates to the ' No Data Available ' under his paw through Virtual Center performance. Fine appears real-time performance data, but the latest data are not appear and give the error as "No Data Available".
Within the cluster of 4 hosts, alone is to have the point above. Others are appearing fine performance data.
In another cluster host ESXi too connected to the same vCenter, I see one of the host is to have a similar question.
I checked:
- All work Rollup SQL is run successfully the default schedule.
- Restarted vpxa service connection to the host directly using the vsphere client.
I followed the KB article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2007388 . as suggested in the article when I run the Sub SQL query I see there is no data within who.
exec sp_spaceused vpx_hist_statx
name lines reserved data index_size unused
VPX_HIST_STAT1 NULL VALUE NULL VALUE NULL VALUE 0 KB 0 KB
The output is similar (no data) if I run these queries:
exec sp_spaceused vpx_hist_stat2
exec sp_spaceused vpx_hist_stat3
exec sp_spaceused vpx_hist_stat4
Current configuration:
ESXi 5.1.0 799733
vCenter Server 5.1.0 Build 1123961
Please help solve this.

I actually planned for the downtime of the host and restarted it.

Although loading performance data now.

Thank you!

Virtual Center for a given host list

OK, I'm sure that miss me something easy here so I'll throw out and see if someone can help.
I'm trying to do a report on my hosts that lists the number of processor sockets, carrots VMS, cluster parent and Center Virtual parent.
For the life of me I can't figure out how to find the virtual Center.
I connect to multiple virtual centers like this connect-VIServer-Server Denver.myorg.com, Chicago.myorg.com, Savannah.myorg.com

Greetings-

I see. Looks like that the property on the VMHostImpl object (returned by Get-VMHost) was not always there. I was checking against an environment that has the API vSphere 5.1. I saw, as you have said, that these other properties were not present during the test against an API v5.0 environment.

So, Yes, as you said - the '. '. Client.ServiceUrl"property of the View object for the host has a string that can be used to infer the vCenter server name. And, you can still access this property of the VMHostImpl object via the. ExtensionData property. Something like:
```
Get-VMHost | select Name,    @{n="vCenter"; e={($_.ExtensionData.Client.ServiceUrl -replace "http[s]?://", "").Split("/")[0]}}
```
What do I do?

Predefine FireSight Virtual Center of defence...

Similar Questions

Notification of critical support quest product
Quest® vFoglight® 6.7 and Foglight® cartridge for VMware (all versions)

Solution SOL55723

Title

Description of the problem

Cause

Resolution

Maybe you are looking for

name	lines	reserved	data	index_size	unused
VPX_HIST_STAT1	NULL VALUE	NULL VALUE	NULL VALUE	0 KB	0 KB

Predefine FireSight Virtual Center of defence...

Similar Questions

Notification of critical support quest product Quest® vFoglight® 6.7 and Foglight® cartridge for VMware (all versions)

Solution SOL55723

Title

Description of the problem

Cause

Resolution

Maybe you are looking for

Notification of critical support quest product
Quest® vFoglight® 6.7 and Foglight® cartridge for VMware (all versions)