Premiere Elements gel and closing after the addition of a Menu.
I made movies with Premiere Elements for some time now. Since I started, I had the same problem. It would hang and eventually close on me. Then, I got the new version, PE8 earlier. Unfortunately, I still had the same problem.
I did a full video of the trouble with the problem of gel. But I put in with him and recorded all the minutes. Now, I get to the end and made the pages of Menu. When I almost finished it, he closes on me. I keep trying to get into it, with absolutely NO success! I have dealt with this for a long time, so I'm well aware you need to disable the internet software and viruses with the analysis in real-time. I also have been manually close all I can in my Start menu.
From time to time I reboot to see if that helps, but no help. Reflected on the conversation here for a while, recently and I tried what I think it's just that. I made sure that I got the updated release of 8 elements. I've updated everything, all the important and optional updates. Made sure my graphics card is up to date. I do not use QuickTime, but I've updated in all cases. I ran disk cleanup and defragmentation. I've done the MsConfig disabling Hello, mobile from apple, ITunes, player. I'd start without graphical interface. I even disabled the Windows Indexing Service.
Even after all that, everytime I open PE8, I gives me the warning that they are running down on memory! I don't know what else to do. Help, please.
Now, I know that you all want to know what are the details of my system, so here it is.
Dell XPS 420
Windows Vista Edition Home Premium
Service Pack 2
Intel Core Quad Q9450 2.66 GHz CPU
4.00 GB Ram
32 bit OS
600 GB HDD
207 free disk space
My graphics card is an ATI Radeon HD 3600 Series with driver version 8.850.0.0 as of 19/04/2011.
I think that's all you need. If I forgot something, let me know.
Thanks for your help, Sharon
Sharon,
I am completely agree about the "minimum requirements" said on the Adobe Web site and on the box. Many believe that these specifications. are the bare minimum for install and run the program, but not much more. This will depend on the project in question, assets, and the many factors of computer tune (operating system and hardware), only one a. I'd like to see Adobe work these needs until the plug of real world. to make a moderately large project, however there are the issue of the status of melody of the PC. The same goes for PrPro, as well - the specs. are not much more than for the first, if they are different at all, except the need for a 64-bit operating system with CS5 & CS5.5.
Now, to help meet the State of melody of the computer, this ARTICLE has several useful links to the bottom of thread after some basic troubleshooting tips for PrE. Memory and resources are multifaceted, and many aspects come into play. The tips of these links cover several bases, but with possible configurations and hardware, are never going to be complete.
Good luck and I am very happy that your project is going well.
Hunt
Tags: Premiere
Similar Questions
-
Problems with WRT54GS and EasyLink after the addition of the Comcast Digital phone.
I had a working network. Cable modem (Comcast), WRT54GS, 2 PCs per (an XP/SP3, a Vista Home Edition SP1), 2 cable PC laptop wireless (an XP/SP3, a Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as a network printer). Everything was going well and worked.
Then, I added the Comcast Digital phone. Obviously, they went for a new modem cable modem cable with the phone service option. Now I can't print to the wired Vista PC OfficeJet and EasyLink displays "initializing" for too long I'll wait (5 minutes).
Finally, I must kill EasyLink from the Task Manager. Any help or ideas appreciated!
I solved the problem. It turns out the new modem cable and problem with EasyLink initialization were 'diversion '.
The problem turns out to be a classic network problem! The Vista PC wired had a wrong IP address. The wireless PC XP has the printer configured with the name of network instead of the network address (IP, for example).
When I deleted the printer on the Vista PC and added to the correct address everything worked fine.
Apparently, the printer got a new IP address of the server on the WRT54GS after installing the new modem. In addition, it seems that Vista doesn't has not report an error of communication to a network printer, but for a direct USB connect.
-
Nice day. I already have a Creative Cloud for Photoshop & Lightroom License, and I would buy Adobe Premiere Elements or even Pro in the same conditions. Is this possible? @
CC of Lightroom and Photoshop CC are included in the subscription 'Special photographers' creative cloud for $10 per month. There is no "special video" nothing is included in a special issue. You can add any unique application for another $20 a month, or you can subscribe to a $50 per month for each of them.
Elements of Prime and Photoshop Elements are both similar to the "CC" or "professional" versions, they are also very different programs. For example, video projects made in elements of Prime Minister cannot be opened in Prime CC. They are both marketed by selling you a license to use, not a subscription. You can usually get the best price in the days before and after Thanksgiving.
My personal choice is to use the package special photographers to access Lightroom and Photoshop while buying a license for the elements of the Prime Minister for my video editing. I would prefer to have access to the first CC but, the cost is not justifiable as an amateur about doing a short project each month. My investment of Thanksgiving sometimes yearly, in elements of Prime Minister is usually around $40. I never got everything I want to do with the video in need of more expensive software.
Bill
-
WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.
Try to do these steps, it should help:
1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.
2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.
3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.
4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.
5. return to the home screen and open whatsapp.
6. go in the settings, press Whatsapp and turn back.
7. open whatsapp again. It should work now.
-
It is a nightmare. Absolute total nightmare. Like a fool, I went to San Luis Obispo staples and bought Adobe Photoshop elements Adobe Premiere elements 14 and 14. I logged on to your Web site with the redemption code and received your serial number. Of course, he did not. Any of you have ideas.
What is the error message?
It is unacceptable to permit http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-
2 questions: why are there no "forum" for Ad Premiere ELEMENTS? And: HOW to EXPORT (with Prem 13,00) FOR COMPUTER VIDEOMATERIAL WITHOUT LOSS OF the ORIGINAL DV or ANALOG VIDEO-QUALITY (inasmuch as I get - to start - an endresult SMALLER!)
Thank you, Ann. I'll move it.
Kind regards
Kevin
-
Adobe Premiere Elements does not open after installation
Hello
I've written before last week. I bought Adobe Photoshop elements 11 and Adobe Premiere elements 11.I had a trial version of Photoshop elements 11 and with the code I could access the full version.
However, Premiere Elements did not open after installation. I have a trial version, so I downloaded the full program. I went through the installation process and everything seemed ok, no error message. But when I tried to open Adobe Premiere Elements after you restart the computer, it did not open at all. Nothing happened.
I uninstalled and reinstalled the program for a couple of times over and over again, but no result. Also tried to download the free trial first, and also it does not work. I checked my Quicktime and updated to the latest version.I use a Windows laptop: Asus Intel Core i5 - 2430M, 2.4 GHz
I hope you can help me!Thank you!
Inge
Have you seen the answer you received in post http://forums.adobe.com/thread/1226832 your course from last week ?
-
I use Mac OS 10.10 with 30.0.2 FireFox as my browser. I did call OK On Goggle voice through my G-Mail account. When I ran out of credit. I loaded an extra credit and tried to resume the call. However, I kept get get the following error message "Please download the plugin from voice to make a call. After the link provided leads me in a blind ally. Tried to download a voice plugin and reinstall, but no luck. Tried to close Firefox and reopen, but again no luck. There are no problems when you use Safari as my browser. calls are directed very well.
Can't understand why it has worked very well and thenstopped after laoding additional credit.
Hello
Try to clear your cookies and cache and then try to connect again.
- History (or
(> History) > clear recent history
Or:
"Clear the Cache":- Tools (or
> Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools (or
> Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".
Make sure you that you allow the plugin on the site as it is maybe somehow it changed.
In the world:
- Tools (or
) > Addons > Plugins
- For Google Talk Plugin (and Video Renderer), make sure it is set to "Always enable" or "ask at.
By Site and:
- On the site, click on the padlock or icon globe to the left of the web address in the address bar and click 'more information '.
- Or go to: Tools > Page Info
- Click the "Permissions" tab to see if the plugin is activated on the site.
- Note: You can also go to the Subject: authorizations page and watch your permissions set for each site
- History (or
-
I have a disc first elements 9 and serial No. The computer says that the autorun files are not good. How can I install the software. If I had an older version of test I could download and use my series to unlock the program. Help
http://prodesigntools.com/Photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
Follow the instructions carefully.
-
Vista Ultimate 64-bit
How to get disabled login user (without password) at startup, so NOT to SHOW it to all (and needed clicked) and so after the switch, go to desktop directly?
Also after inactivity, how to not go to sleep mode and press "power on" to bring back?
Hello
If you want to start directly on the desktop?
How to automatically connect at startup in Vista
http://www.Vistax64.com/tutorials/66966-logon-automatically.htmlOr
How to make Vista require a user name and password when connecting
http://www.Vistax64.com/tutorials/89812-logon-username-password.html=========================================
Start - Control Panel - Power Options - upper left - require a password on wake up
tick her do not require a password - save the changes.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Problem with opening programs of text and photos after the upgrade of computer for Windows 8
Original title: Photos open in Notepad
Hello
Laptop with win 8.
Recently upgraded XP to win8 with purchased MS DVD.
All text programs open graphics (pictures) in Irfanview & if I send them WORD show as hieroglyphics jeeperish.
And all the photos to open Notepad in hieroglyphs jeeperish but if I open them with "Sendto" Irfanview or MS photo editor pictures appear.
Seems the association went haywire. How can I fix this please?
8 win in my PC is not that. .. thanx... .Nick
Hi Nick,
Please contact Microsoft Community. I understand that you have a problem with opening the programs of text and pictures after the computer upgrade to Windows 8. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.
This problem could occur if the default applications are not set correctly.
I suggest you read the article that will help define the default applications that Windows automatically uses when you open a particular type of file, such as a song, film, photo or Web page.
Choose the apps Windows uses by default
http://Windows.Microsoft.com/en-us/Windows-8/choose-Programs-Windows-uses-defaultHope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
-
What is the difference between the element catalog and category of the item
What is the difference between the element catalog and category of the item
PL. visit the following links.
Catalogue of objects: Oracle ERP Apps Guide
What is the difference between the category of the item and itemcatalog you can plea
-
I've added two elements (accessibility and analyze) in the Tools menu of right hand. How to remove or hide? Or at least rearrange the elements of the toolbar. I want to Sign & certify be the last element/section. Thank you.
Hi Stacey Nathan,
To remove the items from right toolbar, click Tools at the top.
Then open the fall down to the accessibility or analyze and select 'delete the shortcut '.
In a similar way, select "Add a shortcut" in the Tools drop-down menu to add to the tool on the right pane.
Let us know if you need help.
Kind regards
Meenakshi
-
The site Web from Adobe won't let me go to the cashier and pay after the lightroom update option 5
Use another browser or delete your adobe.com cookies and try again.
-
[French] Can I install Photoshop Elements 10 and 11 on the same computer?
can we do coexist Photoshop elements 10 and 11 on the same PC?
Title of the message was edited by: Brett N
Yes, each program is autonomous.
Both versions use the same files. Organizing United Nations elements privilege creates pour each photo without duplication.
Maybe you are looking for
-
Change language in Firefox does not work. I have pictures of it.
I can't change the language to Spanish some time I had. Why?Bar menu is: file edit view history... but when in Spanish: Archivo Editar Ver Historial.And so on with other tools and menus.I have pictures of the two.
-
17 - k100nl: how to open HP Envy 17-k100nl
Hallo!I need to open a cause of 17-k100nl feel LIKE I need to replace the memory.I'm a professional, but I do not understand how to open it. No more (hidden) screws but the cover is securely attached. Can you help me?
-
1000 HP Notebook PC (i3 - 2370M): Wifi button remains orange
Every time I connect via a cable to my laptop is connected and whenever I press the wifi button it stays orange and in network adapters, there is no wifi so software what do I do?Please suggest me if necessary software
-
HP Pavilion G6: Keyboard for my laptop
Hello, my name is omar and today I ask a question very important I must ask, where can I find the HP Pavilion G6, backlit keyboard please report any links to show me and I also need a colorfull that have colors that I can change. Thank you ~ Omar
-
Cannot use the webcam using Skype
Original title: Webcam vs. driver problem "Webcam test site that has English and Spanish fashion, why my webcam works on Spanish test but English test fails? The camera works, of course, it must be the disk I got with the camera. I get the voice of