Premiere Pro 1.5 will not load

Similar Questions

• Yoga 2 Pro: iPad 4 will not load on all USB ports

  Hey

  Just got a Y2P a week ago and always try to understand all the ins and outs.

  Current issue: I plug my iPad 4 to one of the two ports USB, but both ports cause the iPad to say "Do not load"

  USB ports on this low powered computer? or y at - there a setting im missing somewhere... ?

  Energy Manager a loading USB enabled for the mode in which I am

  Thank you!

  the usb port on the Yoga 2 Pro iPad will trickle charge, usually during the night, it will charge about 40% of the total battery.

• Premiere Pro 2.0 will not install on windows 7

  I just installed windows 7 Pro and I am trying to install the Premiere Pro 2.0, but it seems that the cd player will not even read the disc. He tries for a while, then abandons, producing nothing. I managed to do work ONCE and everything seems to be going through all the normal setup procedures, including asking my serial number, I gave it. But at some point he has hung up, was told he could not install something and then stopped without any explanation. There is no trace of any part of this program on the computer at all. So, I'm puzzled as to why this is happening. Someone has an idea?

  Since you have Win7 Pro, see if this will help

  http://www.Microsoft.com/Windows/Virtual-PC/

  In addition, some further reading

  Win7 help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
  Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
  Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
  Optimization of http://www.blackviper.com/Windows_7/servicecfg.htm

• Premiere Pro cc 2015 will not launch after putting in

  3 I just updated Premiere Pro cc 2015 via Creative Cloud on Dec 2015

  Then, when I tried to open it, I had this error message:

  The application failed to start properly (0x000001d).

  Reset did not help.

  I am running Windows 7. The Premiere Pro cc2015 worked fine on this machine, so I doubt that the problem due to the plug to my computer.

  Thanks in advance for your suggestions.

  Looks like it is caused by a problem with the AMD Phenom processor. Check out this thread:

  Premiere Pro 2015 won't open after the recent update

  Then go here and pulling back to the previous version:

  Install an earlier version of any creative cloud application

• Premiere Pro CC 2014 will not play anything.

  Today, I launched a brand new installation of first Pro CC 2014 upwards (this is a trial) on a new iMac (3.5 GHz intel Core i7, 32 GB of RAM, NVIDIA GeForce GTX 780 M 4096 MB) and my project that was working fine yesterday on my MacBook Air will not play anything. The images are all H.264 digital SLRs. My sequences won't play, won't play my videos, my merged clips will not play, my multi cam sequences will not play. You press play and the play button becomes a stop button, but nothing happens. I tried to log in as root, but it will not play there either. All images are sitting on an external Lacie 4TB thunderbolt drive.

  Any thoughts?

  I thought it might as well be the permissions... ends by it was something really simple, but that didn't make any sense.

  Audio hardware preferences has created the system to input/output by default. Transition to the integrated output fixed.

  No idea why the audio hardware settings would keep the photo playback, but there you have it. Thanks to the support of technology Adobe useful phone.

• Premiere Pro 2015 CC will not open files

  Hello

  My computer at home is on the latest version of CC, but my school is only in 2015.  I wanted to open my home project (recorded in 2016), but the computer at school won't allow me.  I get the prompt, "the file has been saved on a newer version of Adobe Premier Pro and cannot be opened in this version.  Is there a work around for backward compatibility?

  [title edited for clarity by mod]

  Your only option would be to export XML from your home computer and then import the XML file on your computer at school.

  An XML file will transfer all effects, etc., but it will transfer the cut basic information.

  You will need to have the same support (or an identical copy) used in your available original project to be linked on your destination computer.

  MtD

• Premiere Pro CC 2015 will not launch in Windows 10 PC

  First of all, my setup is a Samsung ATIV book 8, with a new SSD (Samsung 850 EVO) and a new install of Windows 10 applications Adobe through the creative cloud.

  Whenever I try to launch the first Pro CC 2015, he pulls up to the splash screen and closes every time. After scouring the internet for possible solutions, the only thing that works so he could start is by disabling the driver Intel(r) HD Graphics 4000 and running off the AMD Radeon HD 8700 M.

  It wasn't a problem when the Windows 8.1, and I made a complete new installation of everything. Any ideas what could be the problem? Is there some kind of fix for this?

  Thank you!

  Thank you very much for your help! With digging a bit, this article did the trick:

  http://forums.Guru3D.com/showthread.php?t=396648

  I was able to edit the graphic method to High Performance after name change a little for the .exe file.

• I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset on AEC

  I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.

  Thank you

  Katie

  It is under warranty. Suggests taking it for an Exchange.

• My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  Apple has set the rates, price around $300 repair program.  I don't think you can get a price of paste elsewhere.  However, there are third-party sites that provide repairs, parts and helpful videos.  Google is your friend.

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• There is no system restore Windows XP Home Edition 15/07/12, Service Pack II, XP Pro will not load, I'm stuck in 2005 with no possibility of update. Help!

  The title says it all.  I had to restore XP Home Edition to 2005 this weekend, and there is no cure for update, loading Service Pac II.  XP Pro Service Cap does not load when I copy it to my hard drive, all close and try to run.

  Where is XP Home Edition Service Pac II?  No service PAC II, no service PAC III, no ability to update, I get the error of 4000A dreaded etc..   Hate buying a new 'box' just at this moment.

  Thank you.

  Hello

  Download and install the Windows XP Service Pack 2 network installation from the link below:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Download and install the Windows XP Service Pack 3 network installation by the link below:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Download and install the Windows XP Service Pack 3 . ISO file to create the CD

  http://www.Microsoft.com/en-US/Download/details.aspx?&ID=25129

  Hope this information helps.

• Mac will not load some web pages but works in safe mode

  Hello

  I am trying to solve the following problem...

  MacBook Pro with 10.11.3 will not load some web pages (booking.com people.com are just a few). Browser will not make a difference.

  Looked around the discussions and tried a few remedies but without success. for example, change the dns data, site reset or 8.8.8.8.8 create a new user and I have tried several different networks.

  All the site will load in safe mode.

  Thank you guys!

  If they load in Safe Mode, then it is a third-party plug-in or software blocking sites while not in Safe Mode.

  Do you have the third-party antivirus or firewall? Do you have any unknown third party plugins or extensions?

  Open the Finder, click go > go to folder, copy and paste the following and click on Go

  ~/Library/Internet plug-Ins

  This is where your plug-in user. By default, this folder must be completely empty, so anything here has been added either by you or with 3rd party software that has been installed. You can move anything in this folder on the desktop and then try with your sites. If this works, your choice in their folder one by one until it doesn't. Remove the problem and it redownload only if you really need.

• I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Plays in the video source, but does not allow me to change on the time line with the. MXF files.

  I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?

  Neil, get it fixed, I do not have the video channels set correctly on the left

  side of the line of the time. Learn the new adobe; Thank you

  Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>

• Premiere Pro CC 2015 will install on my second computer for backup.

  Premiere Pro CC 2015 will install on my second computer for backup. The Application Manager lists only the first CS6 in option, which takes 20 seconds to download and finishes (obviously not the program).  This is a reformatted machine and a brand new facility - no previous version is still on the machine.  Literally, the CC was the 2nd application installed.  I managed to install other applications CC 2015 - Photoshop, InDesign, Lightroom, etc.  I have the full CC license and have installed Premiere Pro CC 2015 on my main machine.  Any help would be appreciated!

  Have you checked the first Pro CC 2015 requirements to see if your computer meets them?  If your sytem was short somehow the Desktop Manager it will list not by download.

  Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

• Premiere Pro CC 2015 does not recognize Sony MTS on Windows 7 files

  Premiere Pro CC 2015 does not recognize Sony's MTS files

  Edit the title by moderator

  Hi Curtis,.

  Please go to the Task Manager on your windows 7 prcesses tab (CTRL + SHIFT KEY + ESC), check the box that says "show all processes of users." Once close all Adobe found in the process tab processes.

  After that, please go to the documents folder and rename files like Old_Adobe Adobe

  Then click on the Start button and in search programs and files box, type %AppData%, this will take you to the roaming folder. In this, rename the Adobe folder as old_Adobe.

  Restart your machine. Launch of Premiere Pro > sign in then check the behavior.

  Vinay