Similar Questions

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• Adobe Premiere Pro for Mac CC 2015 does not open.

  Hi, I, ve downloaded Adobe Premiere Pro for Mac CC 2015 and spin OS Yosemite.

  When I try to launch the app, it goes through the boot process and then closes (or does nothing).

  I tried to uninstall and then re - install, but the same thing happens.

  Anyone got any ideas?

  Thanks in advance.

  Having had an online chat with Adobe, they have taken control of my mac and came to the conclusion that it was a permissions problem. They advised me to repair permissions with disk utility. I did and it did not work.

  They also advised me to create another administrator user account, it worked, however it is not convenient switch to another user account.

  In the end I did some research and found this solution.

  If you right-click the hard drive icon, info, unlock the padlock at the bottom and give full read & write to (your username (me)) it will ask you if you want to apply to all the files, I said yes.

  It took a few minutes to complete and then voila, I could open up, no problem.

  I hope this helps.

• Importing files AVI H.264 in Premiere Pro on Mac

  I work with files from a mobile DVR. The DVR uses H.264 compression and AVI files. Files can be opened and discovered very well on my PC, but cannot be opened on a Mac. To view the files, I have been using a program called Elmedia Player. Files can also be imported into Premiere Pro CS5 or CC. I don't have a first on the PC to be able to try to import here unfortunately.  I've been converting files using Total Video Converter MPEG 4 Pro and then import it in first. It worked, but it seems to drop frames during conversion. Any suggestions on what I can install to be able to import the files into first without making a conversion? If this is not the case, no matter what other converters that people recommend? Any additional info, I missed it would help me?

  Thanks in advance.

  I'm not sure that it will actually work, but try to replace the name extension of AVI to MOV file to 100%.

  Also, I found Flip4Mac (play on your Mac - Telestream Flip4Mac Windows media) very helpful for etc. ASF, ASX, WMV, AVI.

• Not directly download Premiere Pro CS6 Mac

  Hello

  I am trying to download

  Premiere Pro CS 6 of

  CS6-products download

  and for this purpose

  http://trials2.Adobe.com/AdobeProducts/PPRO/6/OSX10/PremierePro_6_LS7.dmg

  but all I get is

  Access denied

  You do not have permission to access to " " http://trials2.Adobe.com/AdobeProducts/PPRO/6/OSX10/PremierePro_6_LS7.dmg "on this server. "

  Reference #18.a7d81002.1416481258.69ae48a0

  doenst matter if I'm connected with my Adobe ID or not.

  Where can I download CS6?

  Hello

  Please follow the below mentioned procedure to start the download.

  1. Click on: Adobe - Adobe Photoshop elements 13 test free download | Adobe
  2. Paste it below mentioned link in the address bar and press return.

  http://trials2.Adobe.com/AdobeProducts/PPRO/6/OSX10/PremierePro_6_LS7.dmg

  This should start the download, please come back if you are not able to download it.

  Thank you

  Atul Saini

• Premiere Pro freezes mac while making the fast color corrector & Rgb curves

  I'm having a problem that affects our business. We make ads that we of the object color correction using curves of fast color corrector and RGB. When these effects are added to the video sequence, the Mac Pro performance slows down considerably.

  Then when we make the project so that we can see the effects in real time, the computer crashes completely. The program usually informs us that it must close due to a serious error. I tried to reboot the computer, clean etc. permissions for this problem, but nothing helps. Why would this happen? Any ideas on how to solve it?

  Here are the specs:

  First Pro CC 7.2.1 using (4)

  Mac Pro: 3.2 Ghz Quad-Core Intel Xeon

  Memory: 24 GB

  ATI Radeon HD 5770, (1024 MB)

  OS: 10.8.5

  After tracking down technical support adobe, the issue is the video card. Our mac (2012 series) comes with a map of MB ATI Radeon HD 5770 1024 which Adobe Premiere pro interacts with when you perform the color correction. We have solved this problem by following these steps:

  In first Pro CC

  Go to FILE > PROJECT SETTINGS > GENERAL > under Renderer choose Mercury Playback Engine Software only

  This increase spectacular performance.

  The final fix will change our video card.

• Adobe Premiere Pro and After Effects works well with the merger?

  Hey everybody,

  I'm in the middle of a semester at the University and I use Adobe Premiere Pro and Adobe After Effects (Windows version). I was wondering if the merger would work well with these programs? I intend to the latest update of merger next week.

  The mac I use is an iMac in August 2008 (running 10.5.6). 3.06 Ghz, 4 GB RAM, 1 TB HD, and a Nvidia GeForce 8800. I also install Windows XP Pro edition and the value of using two processors and 2-3 GB of RAM.

  I will also put it on a new account make sure that practically nothing is running while im current merger.

  I use this for my final college.

  Edit: I forgot to mention. I use CS3. My school has not yet updated in CS4.

  In addition, you think that a 64-bit version of Vista will work best and then 32 bit XP on this partition?

  I love Fusion as much as anyone here and use it a lot. But, in saying that...

  You use this something really important - your final college. You need to perform at its best performance with as few problems as possible because you don't have a lot of time in your semester left (in the grand scheme of things).

  My advice - do not experiment. Work around the merger (as heretical as it may seem on this forum) and first and AfterEffects in a punt in native mode Windows XP OS that is on a BootCamp partition. Video editing will focus on i/o and graphics of your system performance - and nothing works better for this than the native access to the system.

  Running two processors in a virtual merger with computer on a machine with 2 hearts can lead to better performance and is not recommended.

• IM Download premiere pro on mac nut cc, it is said "you run an operating system that Premiere Pro no longer supports. See the system requirements for a complete list of the supported platforms. "How can I fix

  m download first pro cc on nut of mac, it is said "or running an operating system that Premiere Pro no longer supports. See the system requirements for a complete list of the supported platforms. "How can I fix

  Hello

  Please see system requirements below: -.

  Premiere Pro system requirements for Mac OS and Windows

  I hope this helps you!

• Adobe Premiere Pro CC - Visual works, no audio with MOV

  Help, please!

  I have a clip on the timeline that the signal is not triggered, but the Visual works.

  The file is a MOV and appears gray, not blue like other clips.

  This is my first time working with Adobe Premiere Pro CC, so I'm a novice at this program, but not video editing.

  All suggestions are welcome!

  Is there a work around?

  Thank you!

  JANNET

  

  Hi Jacob,

  You have not inserted the audio for this element.

  Click A1 as V1 is highlighted (in blue) once done drag the audio on the timeline and check.

  

  Vinay

• Premiere Pro export takes forever! Even with CUDA enabled! Help, please!

  I am a sequence in first pro CC which is 1 minute and 40 seconds. the details of the sequence are:

  • Video files Blackmagic Pocket film camera ProRes HQ
  • lugins used for color grading on separate clips (as a comparison between the ranks of different color of the same clip) - convert movie, Magic Bullet Looks and three different LUTs
  • I added a box to the letters 1:2.35 on top of all the clips
  • In each clip to identify what plugin or LUT is used for each shot, I have added a little text

  Here are the specs of my computer:

  • Windows 7 Ultimate 64-bit (service pack 1)
    
  • Dual core AMD APU A4-6320 with graphics Radeon HD (overclocked to 4 GHz)
  • NVIDIA GeForce GTX 750 Ti 2 GB (overclocked)
  • 8 GB GDDR5 RAM 1600 MHz (such as two 4 GB sticks)

  Premiere Pro export settings:

  • H.264
  • 1920 x 1080 (1.0 progressive and square pixels)
  • 23.976 fps
  • Profile: high
  • Level: 5.1
  • Go to verified maximum depth (prores HQ bmpcc gets 10-bit)
  • Pass VBR 2
  • Bit rate = 30 target
  • flow rate Max = 40
  • Use disabled previesws because I have not been made in the workspace to verify it would not make much difference)
  • Made maximum use quality - I tried this checked and unchecked with the same time of export for both (I have read the forums where this should be disabled if you have the MPE CUDA enabled in Premiere Pro, because it is heavy CPU, but then some forums say always leave on any - which is really confusing)
  • I'm exporting to a hard drive with 7200 RPM

  Those 1 minutes 40 seconds sequence takes about 40 minutes to export which is too long. \I really need help understanding what the problem is and why export takes so long. Thanks in advance

  SAFEHARBOR11 wrote:

  What I've read above on these forums is that AMD chips lack any set statement that like the first, and that hurts performance.

  I read that too, and when I looked at the instructions mentioned, they were available in the new amd fx chips. the main problem for instructions is amd doesn't have a boost intels 32bits single thread. Intel has been very wise to make a unique help for former thread programs of 32 bits. the real advantage for users is that works of boost for the sloppy, 64 bit programs as bad coding in the adobe software. what it boils down to is intel offer superior performance, but at a higher cost to match. I recommend intel and amd if budget requires.

• Premiere Pro CC - waveform I can synchronize with * several * camera and audio clips a Pluraleyes the?

  Many of us use Pluraleyes to synchronize the DSLR and 2nd audio WAV files using waveforms. (No timecode.)

  The ability to synchronize in first Pro CC has been mentioned in several lists of feature, but I don't see the ability to synchronize a clip at a time.

  Y at - it no way to align several MOV and WAV files with different start / stop times and no other another match that of waveform and synchronize them automatically in first Pro CC in a sequence (or by creating multiple merged clips)? In other words, can I reproduce the Pluraleyes features in this new version of Premiere Pro?

  Currently, the best way to do it is by selecting all items in the project Panel, right-click on it and select Create multi camera source sequence.   Synchronization via audio, choose your audio settings (if you want audio in both clips, select all cameras), and then click ok.  Blocking is smart enough to make this batch and make several sequences of MC with only the clips that match each other.  Unfortunately merged clips, or timeline sync will do only one at a time.  If you want this behaviour in amalgamated sync of clip or timeline, please file a feature request: https://www.adobe.com/go/wish

• Premiere Pro CS6 Mac - second monitor has stopped working

  I've been using CS6 configuration dual monitor for a few weeks.  I activated the second screen for video playback in the settings and everything worked very well.  Now for some reason any the second screen no longer works with Premiere Pro for playing video (it will not preview fullscreen) even if for my second monitor option is checked in the preferences. I makes no changes to my system I know.  I really want to understand this because it is quite annoying and frustrating that it worked perfectly for 2 weeks and now it doesn't work at all. (Have restarted system already) Any help would be greatly appreciated!

  I spoke with tech support and they were able to help me solve the problem.  The solution involved moving my program on the second monitor and then reverse the setting of the option (IE, do the main monitor my monitor reading)... after that, I went it back by moving the program on the primary monitor and set the secondary monitor as my reading screen.  Seems to work fine now.

• Any ideas? Premiere Pro CS6 crashing whenever I try to import clips!

  Hey everybody,

  I'm relatively new to Premiere Pro CS6 (gradually switching to Final Cut), so forgive me if there's any details miss me. I have real problems with getting the app to work, unfortunately.

  Here's the problem:

  I can create and save projects very well. Nothing is slow or appears bad. However, every time I want to import clips (in any parameter of project/sequence, or codec, as well as different types of clips from the camera), Premiere Pro instanty throws a message - immediately - to say:

  «I'm sorry, that a serious error has occurred which requires Adobe Premiere Pro stop.» We will try to save your current project".

  It is literally impossible around that, that I can tell. I tried all different types of clips, all the different import methods (for example drag / move, media browser, file > import), but nothing. It isn't even a matter of film - the same applies even if I just try to import images. Oddly, with grag and drop - method if it is a video clip, PP registers even how long the clip is, highlighting where the clip will insert - she normally would be - but then instantly crashes after abandonment and/or trying to read. This led to believe me (because I never saw a single visual image in Premiere Pro) there could be a graphic bug - potentially something wrong with my system.

  For any help or suggestion would be received with gratitude. I have attached to the report of crash below and some features of my system.

  See you soon,.

  Alastair

  MacBook Pro 15 "(Retina Display) - mid-2012"

  Intel Core i7 2.6GHz

  RAM 8 GB 1600 MHz DDR3

  OS X 10.8.2 (12 C 60)

  Intel HD 4000 512 MB graphics card

  Premiere Pro Version 6.0.2 (072 (MC: 264587))

  

  PS just Gunna do a full update of my Mac OS X to bring it up to 10.8.3. I doubt that this will fix the problem, but it's worth a shot, and if no bed I'll let you all know.

  Hey everyone just updated:

  I think I've solved the problem!

  No idea what it was, but it would either have been:

  (a) restart my MacBook (unlikely!)

  (b) update the firmware from Apple

  (c) update the Apple Retina Display update

  (d).. .the above all of that!

  He actually started to work before you go on 10.8.3, so not associated with OS X.

  In this case, my apologies for the long post - hope it helps everyone in the same situation in the future. Moral of the story: the Apple software update!

• I can't download Premiere Pro to a pc Win 7 with AAM V7. Several other applications works fine

  I can download fireworks for the MAO seems to work

  Check the requirements spec tech for first against your machine to ensure that it is able to run the software.

  http://www.Adobe.com/products/premiere/tech-specs.html

• Premiere Pro CS5 - Mac Chroma Key

  The main feature of chroma is available in PP CS5 for mac yet? I can't find any confirmation of this.

  Yes.

  You won't miss the old filter key chroma.  It weas terrible.