Premiere Pro export takes forever! Even with CUDA enabled! Help, please!

I am a sequence in first pro CC which is 1 minute and 40 seconds. the details of the sequence are:

  • Video files Blackmagic Pocket film camera ProRes HQ
  • lugins used for color grading on separate clips (as a comparison between the ranks of different color of the same clip) - convert movie, Magic Bullet Looks and three different LUTs
  • I added a box to the letters 1:2.35 on top of all the clips
  • In each clip to identify what plugin or LUT is used for each shot, I have added a little text

Here are the specs of my computer:

  • Windows 7 Ultimate 64-bit (service pack 1)
  • Dual core AMD APU A4-6320 with graphics Radeon HD (overclocked to 4 GHz)
  • NVIDIA GeForce GTX 750 Ti 2 GB (overclocked)
  • 8 GB GDDR5 RAM 1600 MHz (such as two 4 GB sticks)

Premiere Pro export settings:

  • H.264
  • 1920 x 1080 (1.0 progressive and square pixels)
  • 23.976 fps
  • Profile: high
  • Level: 5.1
  • Go to verified maximum depth (prores HQ bmpcc gets 10-bit)
  • Pass VBR 2
  • Bit rate = 30 target
  • flow rate Max = 40
  • Use disabled previesws because I have not been made in the workspace to verify it would not make much difference)
  • Made maximum use quality - I tried this checked and unchecked with the same time of export for both (I have read the forums where this should be disabled if you have the MPE CUDA enabled in Premiere Pro, because it is heavy CPU, but then some forums say always leave on any - which is really confusing)
  • I'm exporting to a hard drive with 7200 RPM

Those 1 minutes 40 seconds sequence takes about 40 minutes to export which is too long. \I really need help understanding what the problem is and why export takes so long. Thanks in advance

SAFEHARBOR11 wrote:

What I've read above on these forums is that AMD chips lack any set statement that like the first, and that hurts performance.

I read that too, and when I looked at the instructions mentioned, they were available in the new amd fx chips. the main problem for instructions is amd doesn't have a boost intels 32bits single thread. Intel has been very wise to make a unique help for former thread programs of 32 bits. the real advantage for users is that works of boost for the sloppy, 64 bit programs as bad coding in the adobe software. what it boils down to is intel offer superior performance, but at a higher cost to match. I recommend intel and amd if budget requires.

Tags: Premiere

Similar Questions

  • Adobe 2015.3 Premiere Pro export settings

    Hi people,

    iMac (27 inch, at the end of 2013)

    3.5 GHz Core i7

    32 GB 1600 MHz DDR3

    NVIDIA GeForce GTX M 780, 4096 MB

    So, updated to 2015.3 and I see on the window of Premiere Pro export settings have changed considerably. One of the big things for me is I can not put my bitrates as I used a high-end and low-end, one pass, re-encoding, etc., which is kind of a big deal to me. Is there something I'm missing here? My old preset still life in Media Encoder but I can't get it to load first because those moments I export only a single video file.

    Any help is appreciated.

    Jim R.

    Well, I don't know what happened, but when I opened just first again (and I did that several times today since updated the software) the old presets were back. When I installed initially 2015.3 he only had like 6 or 7 presets available, now they are all here. Maybe some kind of anomaly or something weird I did initially. Anyway, I'm back in business. Thank you!

  • my project file will not open as it was created on a newer version of Adobe Premiere Pro and cannot be opened with this version. What I download?

    my project file will not open as it was created on a newer version of Adobe Premiere Pro and cannot be opened with this version. What I download?

    You should be able to update your version and get things working again.

  • First cc 2014 crash with the message "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

    I've updated for Premiere Pro CC 2014, all other Adobe CC 2014 software works very well, but the first does not load again. The start page (frame) happens - my computer everything slows down and after a minute or two, it freezes completely and comes up with the message: "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

    I use a macbook Pro 15 '' (2014) with 16 GB of RAM and 760 GB SSDS. "

    Help, please!

    Hi Brigitte,.

    Go to the following location and rename the folder in the name of old_folder

    User/user/library/Application Support and rename the Adobe folder

    User/Library/Preferences and rename the Adobe folder

    Then, go to the folder Documents and go to Adobe/Premiere pro/8.0 and rename the 8.0 folder

    Make sure that you are in the library of the user if you are not sure to check out the link below.

    Access the hidden user library files. Mac OS 10.7 and later versions

    Kind regards

    Vinay

  • IBooks on ipad pro crash after IOS updated with 9.3.1.please

    IBooks on ipad pro crash after IOS updated with 9.3.1.please

    I have the same problem after update 9.3 OS on my Ipad 2... Crashing in IBooks. PDF and missing books. I have access to my books for about a minute before it crashed.

    It still occurs with the 9.3.1 update.

    I don't really know where to go then except put it there the 9.3.1 upgrade did not fix my problem.

    Thinking that I might have to consider for an Apple Tech which is an expense I really don't think I should have to bear, because I did not cause the problem that everything worked fine with my iBook before upgrading the OS 9.3.

    Thank you

  • "Adobe Premiere Pro can't find capable video game modules.  Please update your video display drivers and start over.

    Premiere Pro update for me yesterday and now when I try to open it says "Adobe Premiere Pro could not find capable video game modules.  Please update your video display drivers and try again"I have.  I also went on the AMD website to make sure that I have the right drivers and I do... help!

    I have it!  Uninstalled first & reinstalled and here we are ready to go.

  • cannot delete photos with indicator.  help, please.

    I can't delete photos with indicator.  help, please. Thank you. Dick

    Can't stop without context and details

    What version of the OS (you say OS X 10.8.5 - is that correct?) and iPhoto or PHotos?

    What has changed since it worked?

    LN

  • HP PROBOOK 4520 s: my touchpad light can, t activate. When I double tap, he can't even light up. Help, please.

    My touchpad light can, t activate. When I double tap, the yellow light can not even turn on. Help, please.

    Hello DS1994,.

    Welcome to the forums of HP.

    Please try to reinstall the driver:

    http://WHP-hou4.Cold.extweb.HP.com/pub/SoftPaq/sp48501-49000/sp48843.exe

    Make sure you restart your laptop after the procedure.

    + Make sure you press exactly on the light itself, I know that some laptops fighting a little more than others.

    Drunks.

  • CC Adobe Premiere Pro export excruciatingly slow... Help, please?

    Hi guys, the project of a school in a few hours and I have struggled with premiere pro for nearly 15 hours on a 15 minute video. It's pretty basic, a few images and pictures in 1920 x 1080, but for the life of me will not export this thing. It starts very fast but slows to a crawl and then curls up and stops. My system is not pulling punches: i7, 3770 16 gb 1600 mhz ram, k-2 x 780 ti. Any suggestions? I'm dying here.

    Hey guys, thanks for all the help. I found the problem: Gaussian blur. I got a clip that was about 3 instances of Gaussian blur, adobe was very unhappy about it and refused to make this (even after a line of four hours , he was stuck). If someone experiences this problem, check if you have consciously or inadvertently stacked Gaussian blur.

  • Premiere Pro export problems

    I had problems to export from Premiere Pro with my MacBook Pro with OSX 10.9. My exports fell by executives, sometimes black, sometimes green, sometimes with stripes or patterns of mosaic... I tried to update, I tried installing and reinstalling. I tried to export HD 25 p but I also tried to export settings of sequence and that no longer works. I also tried to use Media Encoder. My original film was HDV. Initially, I was working from an external drive WD with FW800 adapter thunderbolt, but I also tried working from an external drive USB3 and also from my internal drive. It makes no difference. The only 'solution' that I found for the problem was when I exported using a friend's computer.

    Before this problem I used Premiere Pro CS6 version because it was compatible with the editing suites I used at my University. But my project developed file some sort of bug whereby it widened almost exponentially whenever he saved. So it became so big (up to 5 GB) that the computer crashed whenever he tried to auto-save. When I converted the project to a CC project that seemed to overcome this problem, so I continued to work with CC of my lap - top. But then I had problems when I first came to export.

    Hello

    Please launch the first pro and click the option to file on the part superior of the Menu and go into project settings

    File > project settings > General > Renderer

    Change the rendering engine for the reading Mercury (CUDA) engine.

    If you do not get the CUDA option in the drop down menu then quit first pro and install the CUDA drivers from the link below

    6.5.18 NVIDIA DRIVERS

    Now launch Premiere pro and select CUDA.

    It will ask you to remove ads sequences, please do and try to export.

    hope that helps.

    Thank you

    Mohd Naseem.

  • Workflow trouble: switch to Media Encoder at the queue of Premiere Pro export

    I have a collaborative project where I have to edit and share short sequences of a larger project. Therefore, I do a lot of export and transcoding on the fly.

    My problem is that whenever I use Media | Export | Queue of Premiere Pro my Mac switches focus to Media Encoder. Since I have Media Encoder to transcode automatically I actually don't need to directly interact with it. I don't need to see. I just need to do his thing in the background so that I can continue working on my project.

    No one knows how to stop the switch of focus to Media Encoder?

    I know this isn't a bigger and a quick cmd + tab will switch me back, but still, it's annoying when I really just a background task.

    Thank you very much

    Michelle

    You cannot change this behavior.

    I'm not in favor of having otherwise, but you can drop a

    Feature request/Bug Report Form

  • I used CC snowfall, but when I export to Premiere Pro, it appears as a gray background? Help!

    I used CC snow to create an effect of snow for my video, once I export in Premiere Pro it simply appears as a gray background?

    We cannot tell what the problem from your description.  A nice screenshot of your AE project will be very useful.  Special interest: the side effects for the snow effect.

  • Premiere Pro random Pan and Zoom with video

    I know that Premiere Pro can't do. I know that still can generate slide shows with random pan and zoom.

    What I need is a way to apply randomly pan and zoom for still images and then edit the video between the stills.

    I know I can do it in yet, but I need other video FX/audio video/editing features for video editing.

    So, I guess my question is anyone know if there is a 3rd party plugin that allows to generate a slideshow in Premiere Pro?

    Right now I use a plug-in for Sony Vegas Pro from Vasst, but they are not the same for Premiere Pro.

    I wish you first had scripting like Photoshop.

    Thanks in advance for your help,

    -Darin

    I stand to be corrected, but I think you could produce your slide show in again then after building the DVD grabs the VOB file and re-edit in first.

    Hope that works for you.

  • "Page not found" problem only with firefox. Help, please

    I get the error "page not found" only with firefox. Works fine on Chrome!

    I don't really know what causes this problem.

    Help, please.

    My Web site address:

    http://laberintowines.CL/

    Thank you very much.

    Please delete browser cookies, then check if still the same issue reset preferences.

    The site works fine on my end with firefox and other bowers:

    Thank you

    Sanjit

  • Help ~! Adobe Premiere Pro exports the poor quality video...

    I'm testing in order for use to YouTube videos of Adobe Premiere. No matter what I do, the problem I have, it is the quality of the exported video, doing not well and it's frustrating... = me '(je voudrais que quelqu'un qui sait ce qui pourrait se passer à me dépanner ici!)

    Therefore, the screen that I was working. This character, I drew... I'm trying to use it in the clip. The left is the original, right, how he showed first upward instead (a little too zoomed in). Accordingly, I decided to reposition him and him a bit fits back in effect... not too bad so far.

    So as I said, this was just a test clip so I tried even second-clip. This export press, I made the following adjustments:


    No. correspond to the parameters of the sequence

    Format: H.264
    Screening: YouTube HD 1080 p 23.976

    Yes , export the video and export audio

    No Gaussian blur

    Width 1 920
    Height 1 080
    Frame rate: 23.976
    Order on the ground: progressive

    Appearance: Square Pixels (1.0)

    TV standard: NTSC
    Profile: high

    Level: 4.0
    No. made to maximum depth

    Encoding Bitrate: VBR, 2 pass
    Target Bitrate: 15
    Maximum flow: 25
    Yes distance keyframe: 72

    No Maximum render quality
    N use found
    No. interpolation

    With that, I queue it and export it to my office, no other changes. After I saw this however... it is really blurry. It seemed to me that if the video demoted to 240 p.

    I would like to help with this, I would like to make my videos much more crisp and sharper than that... the image itself has been designed around 500 x 800 pixels, so there should not be a problem with the picture itself (I think)...

    Help meh!
    -Supy

    Well, we found the problem! You start with an image of HD quality, stuffing in a sequence to only 720 x 480 DV, losing more quality... and then export the image shrunk down is actually jumping again HD.

    If you intend to export at 1080 p, then sequence settings must also be 1080 p. Think of a sequence like a picture frame. If you have a photo 8 x 10, you need, for example, a frame 8 x 10, not a 4 x 6.

    Please use file > New > sequence, then AVCHD 1080 p > and then decide what rate to deliver, 30 or 24, and then choose a preset suitable to work with. What frame rate you select, and then use the same for export (in reality, it is rate of 29.97 or 23.976, rounded names for simplicity).

    Thank you

    The f

Maybe you are looking for

  • Problems in using a DOS Windows Vista program

    I hope someone can help me with this.  I currently have a HP Compaq Presario F700 computer laptop (GR967UA #ABA) which has a processor bicoeur AMD Athlon 64 X 2 (TK - 55 1.80 GHz).  I have 1.0 Gig of RAM, and it's a 32 bit OS.  I am running Windows V

  • How to display the voltage and current of synchronously

    Recently, doing a project on the acquizeing voltage and current synchronouly, then display. the design is welding a resistor(1%) 0.5 ohm in NI 6251 entered analog of her HAVE differential, then acquired the differential voltage at the input to conver

  • HP 15 Notebook TS: Erratic Touchpad Synaptic

    My synaptic touchpad pointer is in every sense of opening and closing of sites I am activated on or not.  It's erractic to say the least.  I've updated all the drivers and software available.  Now, as I type is pointer leaves what he wants to do.  I

  • Word document open in Windows Mail - recorded while the work can't return

    I opened a Word document, use the Save button all working. Finish, but could not find him. I never saved the document in 'My Documents'. Must have registered somewhere, but where should I find it.

  • Sony z3 appearing is not in the google Device Manager

    Sony z3 appearing is not in the google Device Manager I checked the security rating... even with my new Tablet sony z3.