Premium insurance of Collaboration, and provisioning of VM requirements

Similar Questions

• CUCM with highways of Collaboration and mobility, a traditional VCS environment

  Hi all

  I'm positive, that I've read this in many posts before mine, or in related presentations, or the deployment of the guides, but I find it difficult to find this info now.

  I'm looking for is a simple real explanation of how VCS-C/E or Expressway-C/E pairs (or single instances) would be required for a deployment of CUCM that wanted to allow external Collaboration (if communication B2B, both the SIP and H.323), more access mobility (i.e. remote workers using Jabber or other devices for VPN less access), as well as integration with the existing H.323 estate and maybe even the comments Jabber thrown into the mix?

  As far as I understand, MRA and external Collaboration must be on separate pairs of the highway, but I can't remember if the license VCS without Expressway (although I think that it's free) can be used to provide collaboration B2B access, or if something is necessary precisely for H.323.

  See you soon

  Chris

  Hi Chris,

  you will find in the annex a PDF where on page 6-7, 16-20 is a short explanation of the difference between VCS - C/E and Expressway-C/E, also on their differences in license.
  In short - used only for ARM Expressway, Expressway-C cannot be SIP/H.323 in the office, just as a proxy for CUCM (AFAIK).

  Here is the discussion and the replica of the Cisco employee who comments Jabber and MRA may not be on the same pair of VCS/Expressway - https://supportforums.cisco.com/discussion/12289446/jabber-guest-and-mra-same-expressway

  And you can configure B2B (XMPP Federation for example) on the motorway-E but before deployment, you must consider some limitations:

  Simultaneous internal Federation Unified CM IM and presence services, as well as the Federation-controlled external
  managed by VCS Cisco only is not supported. If a single internal Federation is required, you must use
  cross-domain Federation unified CM IM and presence Service. The deployment of the available Federation
  configuration options are:
  l the external Federation only (managed by Cisco VCS).
  l internal Federation only (managed by Cisco Unified CM IM and presence Service).
  l internal and external Federation run by Cisco Unified CM IM and presence Service, but requires
  setting up your firewall to allow incoming connections.
  the information in this document - http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-5/XMPP-Federation-with-Cisco-Expressway-and-IM-and-Presence-Service.pdf

• Can I install my CS6 Web Design & Premium on my laptop and home computer?

  Can I install my CS6 Web Design & Premium on my laptop and home computer?

  Yes.

  Mylenium

• Adobe Production Premium CS5.5 installation and other issues errors

  Hello

  I have just installed CS5.5 Adobe Production Premium on my computer and had a few errors pop up at the end of the installation.  I will paste the summary below.   I tried to install Procction Premium a couple of times.  I used the Adobe cleaning tool.  What I did the research, the Flash issue is a false error given that Flash was already installed on the computer.   The rest is connected to the program as well Flash?

  Thr programs all appear to work except for the below question well.

  My other question is that when I'm in Windows Explorer and I am entitled to say a .jpg file and select open with...  I am not able to choose Adobe Photoshop or Illustrator for this question.  I have Dreamweaver CS4 and who is presented as an option.  I went through the process of trying to add the Adobe Photoshop .exe file, but it still does not work.  However, if I open Adobe Bridge, I can select Photoshop or Illustrator to open a file.  Is this related to my setup or is there something else?  I uninstall an older version of Adobe Photoshop 7.0 I've had for years, but it was prior to the installation of Production Premium CS5.  Could that have caused a problem?  I read that uninstalling an old Photoshop can cause problems like this.

  Any help would be greatly appreciated.

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 4 (s), 2 warning (s)

  -Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} standard Adobe 2.0 2.0.0.0.

  WARNING: DF029: ARKServiceControl::StartService: standard Service not started or stopped. Current

  Status: Exit Code 0: 0 Service specific exit Code: 0 (Seq 1)

  -Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -.

  WARNING: DF035: file CreateAlias:Icon does not exist in C:\Program Files (x 86)

  \Adobe\Adobe utilities - CS5.5\Pixel Bender Toolkit

  2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.7E8FC6P-

  1021rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091e8e552c84a28 97e9da68fce for 2.6.lnk C:\ProgramData\Microsoft\Windows\Start Start Production Premium CS5.5\Adobe Pixel Bender Toolkit icon with target C:\Program Files (x 86) \Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe (Seq 89)

  -Payload: {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0.

  ERROR: Error 1722.There is a problem with this Windows Installer package. A program running in the framework

  installation did not complete as expected. Contact your provider to support personal or package. Action

  NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe, command: -.

  install the plugin - msi

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error: 1722.There error is a problem with this Windows Installer package. A program managed

  as part of the Setup did not finish as expected. Contact your provider to support personal or package.

  Action NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe,.

  control: - install the plugin - msi

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe Flash Player 10 Plugin: installation failed

  -------------------------------------------------------------------------------------

  Post edited by: rynohose

  Yes, your installation errors seem to be false harmless errors associated with the brain dead install Flash. If the programs seem to work fine, don't worry in this regard. As much as not being only unable to open images with Photoshop from Windows Explorer, I recommend you to take this issue to the Photoshop forum.

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• My iPod Touch 4th generation cannot be upgraded beyond ios 6.1.6 and podcast Apple app requires ios 7.1 or later version.  Is there another app, workaround or solution that would allow me to download podcasts on Itunes?

  My iPod Touch 4th generation cannot be upgraded beyond ios 6.1.6 and podcast Apple app requires ios 7.1 or later version.  Is there another app, workaround or solution that would allow me to download podcasts on Itunes?

  You should be able to get the latest compatible version of the app Apple Podcast and other apps too:

  From when iOS 7 was released, Apple can now download the latest compatible version of some applications (iOS 4.2.1 and later only)

  Install the latest compatible version of an application on a previous version of iOS or OS X

  App Store: Download the old Versions applications

• I can't access what whether the internet associated with such sites as Web and other programs which require an internet connection.

  Original title: Weird problem.

  My computer says it is connected to the network and the network is connected to the internet, but I can't access what whether the internet associated with such sites as Web and other programs which require an internet connection. I have reset the router and the computer many times and the problem is still there. Any ideas on how to solve this problem?

  Very strange that this issue has been raised suddenly and even system restore back the working time is not solve it.  At this point, I suspect something mischievous because restoration of return must be a guaranteed fix.  If it worked on Friday, it should work if restore you backup on Friday.

  I ask you to check if your network card has got an update which could have features broke, but that can't be the problem because the restoration of return would be handed over the old version.

  Indeed, using restore in a working time essentially says that this isn't a configuration problem, because configuration is in a known-to-be-working state (because he worked at the restored time).

  I would therefore start at this stage, verification of hardware, antenna, connections, equipment devices.

• I have recived portable computer of the Government with windows pre installed 7professional but now I want to format and reinstal it I require the startup disk and product key (my OS is authentic)

  I have recived portable computer of the Government with windows pre installed 7professional but now I want to format and reinstal it I require the startup disk and product key (my OS is authentic)

  If it's a copy of volume license installed, you will need to contact your employer to find the product key and get the installation files.

  If it is preinstalled at the factory with Windows 7 Professional, then use the recovery partition to reinstall Windows 7.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• I installed a Windows 7 Home Premium in my laptop and I have no internet

  Hello!
  My windows 7 Home Premium lost a dll "api-ms-core-synch-l1-2-0.dll."
  I formatted the local disc (C, and I installed Windows 7 Home Premium again...)

  But I have no internet.

  I need this driver:

  Accession of the display:

  -Standard VGA graphics card

  Other features:

  -BCM20702A0
  -Ethernet controller
  -Network controller
  -PCI device
  -PCI Simple Communications Controller
  -SM Bus controller

  My pc is a HP Pavilion 1230sp g6

  Processor: Intel (r) Core i3 - 2330 M CPU @ 2.20GH 2.20 GHz
  RAM: 4 GB
  64-bit

  I tried to search for drivers and not found

  Hello:

  Save this link on the W7 x 64 drivers for your laptop.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CCUS & DLC = in & sw_lang = & Product = 5180573

  The drivers you need are:

  1 first install it and restart. Driver Chipset installed SMBus Controller

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94402-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5180573 & sw_lang=.

  2. install a second and restart. This will install the drivers for the two video cards (Intel and AMD).

  Never install the Intel one only and never allow an update from HP Intel or Windows update to install or switchable graphics card will stop working.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-99756-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5180573 & sw_lang=.

  3 Ethernet (wired)

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100017-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5180573 & sw_lang=.

  4 network (wireless)

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1 & CC = US & DLC = in & LC =

  5 Bluetooth (BCM20702A0)

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101140-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5180573 & sw_lang=.

  5. card reader (Dev PCI)

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5180573 & sw_lang=.

  6 Intel Management Engine Interface (PCI Simple Communications Controller)

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94325-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5180573 & sw_lang=.

• HP Officejet 6700 Premium: Don't scan and the scan dialog box will not open

  Since I upgraded my computer to Windows 10, I'm unable to use my scan on my HP Officejet 6700 Premium function.  I can't even open the scan dialog box to look at the options etc.  I tried to find 'Scanner and printer' in painting, but it does not recognize.  Any suggestions?  I already deleted the printer and re-installed.  It was working fine before on Windows 8.

  Hello
  
  Thank you for using the HP forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• 8530w Win7 Home Premium fresh install - Wifi and bluetooth radio off just not online

  Hi all

  I encountered a strange problem. I did a fresh install of Windows 7 Home Premium 32 bit edition. I installed all the essential drivers; setting network, wifi, quick launch button drivers HP and others. Wired network works fine. However, the wifi button is orange and does not work on contact. All other keys work well, so I guess we can exclude. The driver is loaded OK and the hardware is connected according to the Intel Pro Set diagnostic tools. However, he also pointed out that the radio switch is thrown off, so the orange light right?

  The radio is off, bluetooth driver moved not because of 'not present material' and I can't enable it.

  I've seen other people with the same problem, but a majority of those who appear to have been related to the HP power management. And as this is a clean install, I don't think that power management is the problem. Just to be safe, I disabled the power management capability in the adapter properties.

  So, is there another way to activate the radio via the software without relying on the button of the Panel wifi? Are there other ways to diagnose the problem?

  Thanks for your help!

  Best regards

  / Thomas

  Have you installed extensions Intel Proset for Windows 7?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D4%257CswItem%253Dob_83281_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Have you installed the HP Wireless Assistant?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_84194_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You can activate wifi via network connections

  

• Vista Home Premium: Startup time and office flaws often requiring the log off / log on to Correct

  At all to being able to help solve these problems successfully:

  When I bought my office, it came preloaded with Win XP (a FANATASTIC/s o!) with an installation disc free for Vista Home Premium. I have installed Vista until recently due to support XP being more available.

  Problems currently on a regular basis (every reboot) are:

  (1) long startup (sometimes nearly 10 minutes)

  (2) the "Blacktop" (AERO) Vista appears generally "gray" (like Win Classic) but with VERY little
  Services (icons missing, unable to run diagnostic programs, etc.).

  In this situation, I usually 'Log Off' and 'Connect' again and it fixes the problem-"bitumen".
  is back with the functions of the al. Despite this, I'll restart desktop using Services.msc. for all the functions

  are available.

  System information:

  (A) AMD 64 Athlon 3500 + (2.20 GHz)
  (B) 3.00 GB RAM
  (C) Vista 32 Bit (SP1 and SP2 installed (all updates current)
  (D) ATI Radeon XPress 200 Series (current driver)
  (E) all drivers are current (no changes required)
  (F) update BIOS (not not required)

  Note:

  (1) I am the user ONLY if the 'Default' options are regularly 'Log In' (as admin) - no guest accounts, etc.

  (2) I reduced some Desktop effects, which are not necessary (Menu Fade in and out, etc.) according to

  instructions of MSFT community on how to do this and what is safe to disable. This helped a little
  and I don't miss these features.

  (2) I deleted the "Windows.old" folder (as there was nothing to add to the Vista o/s).

  (3) I have NOT deleted the Partition which was part of the Win XP System Restore feature as)
  "I don't know if I should as well as to think that I should keep this system offline and running XP).

  (4) I use a security program that securely wipes deleted data, cache password, etc..
  Under Win XP, there was the possibility of "Protect Restore Points" (not required for Vista).
  I do NOT use the option "delete shadow copies".

  My questions are:

  (A) what is the cause of the boot extended both office and how to tackle it successfully?

  (B) what is the problem with the desktop computer? I don't mind the Log in and out a lot but would like to get rid
  me of this disadvantage.  I would like TO have the Vista boot WITHOUT having to Log in and out to

  ensure that the AERO desktop is available and functional.

  (C) should I delete the files and restore Partition in Win XP? Is this the cause may be a conflict with
  Vista? Also, please let know us if you think it would be better to keep these files available if no
  conflicts are possible or probable.

  (D) what is the path, the file name or folder (path if necessary) which governs the entire desktop
  (startup, appearance, services, etc.). so I can enter my security software to exclude it from
  be affected?

  Thank you in advance for any help you can offer.

  Incidentally - for all owners of Scanner Epson 1200U running Vista Service Pack 2:

  YES! Successfully, you CAN install and run this scanner on Vista with the EPSON Twain 5.53 driver without twisting your registry, etc.

  Steps to follow:

  (1) download the file of v5.53 (10245.exe) driver TWAIN Epson

  2) extract to the folder (default location or a location of choice) and open the folder

  (3) right click on the "Setup.exe" file, go to properties and set the compatibility to Win XP SP-2

  (4) run the configuration file and wait for Windows Vista to give up the search on the web, ignore the 'warning' when he

  comes to the top and connect the scanner to complete installation as you did under Win XP (or earlier versions)

  NOTE: You will have to wait a long TIME for the next window appears once complete Vista

  research on the web. It seems that the reason why a lot of Vista with the Epson 1200U Scanner users are

  running out of patience, that it was my problem-so, the Eureka moment happened!

  My camera works great! The only loss is you open TWAIN in the application, is not
  automatically start more. This may be fixable, but I'm glad it works and I don't know enough to make the necessary changes in the registry, etc.

  Thanks again for your help!

  try to use MS-FIXIT

  http://support.Microsoft.com/mats/slow_windows_performance/

  If that didn't help, then maybe you would not survive the installation completely, and you will have to reinstall vista with updates it's still once, don't worry, it happens to all peoples.

• File sharing between 'Vista Home Premium' on desktop PC and 'Windows 7 Starter' on laptop

  Hello

  I have a desktop under Vista Home Premium PC.

  I would use my laptop, Windows 7 Starter, to access the files/folders on my desktop running.

  The existing guidelines of Microsoft tells me to select one of the three options on the 'Remote' tab in the 'System properties' window, you get to via the settings 'distance' in the 'System' part of the 'system and safety' in the control panel.

  However, the "three options", to which it refers do not, appear on my phome PC or laptop.

  Exactly how you set this to the top!

  Thanks in advance for your help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack MVP-networking. EZLAN.NET

• Upgrade to Premium from Dell backup and recovery Message editing

  Laptop continuously receives the message below after upgrade to Windows 10. The user chooses "Remind me" to each connection, however the message still reappears. Other problems such as departure changed to the top and responsiveness of the system are made.

  Is it possible to stop the notification?

  Upgrade of the operating system Windows 10

  We see that you have upgraded to Windows. You can only recover your device to the old version of Windows. If you want to save or retrieve your current version of Windows and all of your data, please upgrade to the Premium Edition of Dell for backup and recovery, create a backup of the system and take advantage of the new features that offers Premium.

  Please choose one of the following options:

  Show me the benefits of the Premium edition
  Don't remind me

  The message stop appearing.

• Vista Home Premium 64-bit OS and it't auto backup program in the Maintenance and restoration Center

  WinZip is used in the storage of the backup files in the Vista backup program? I use the version 64 bits Home Premium and auto backup hard drive every day outside. My backup fles seem to go in the zip file format and are encrypted. I have the troulble playing these files. I need to reinstall the MS Office Outlook Email folders, but I can't read them.

  Hi VanHylant

  When you use a Windows complete PC backup image to restore your computer, it is a complete restoration. You cannot choose to restore individual items and all of your current programs, Control Panel, and the files are overwritten.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/back-up-your-programs-system-settings-and-files

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  http://social.technet.Microsoft.com/forums/en/WindowsBackup/thread/9a082b90-bd7c-46f8-9EB3-9581f9d5efdd

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.