Vista Home Premium: Startup time and office flaws often requiring the log off / log on to Correct

Similar Questions

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• 0x8007001b with Vista Home Premium Center backup and restore backup failure

  I have my Toshiba Satellite M205-S7452 with Vista Home Premium for about 8 months, and November 2007, backup windows, and restore program worked flawlessly. I was able to back up my music, photos and documents to a DVD on a regular basis. But then I started having an error halfway back up that says "drive cannot find the sector requested" with the 0x8007001b error code. It seems that the backup works partially - there are files on the DVD player but I don't know if it ends or not. I tried to do some research on Google and it seems that there is other people affected by this error, but I could not find suggested patches.

  Hi jennielah,

  Please use the Forum of the community for Vista.

  If it has started, use the system restore back to a point before you start. See below for instructions.

  If you can do that I have a work around you. Your specific error seems to relate to update failures, not only the Windows updates but the various failures of update.

  The job is to save it to your hard drive and copy the files on the DVD after the fact.

  I hope this helps.

  Please let us know if we can do something else.

  The System Restore tool

  Other troubleshooting methods, such as using the System File Checker tool, cannot solve the problem. If they do not resolve the problem, and the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time.

  The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start , type system restore in the Search box, and then click System Restore in the programs list.

  If you are prompted for an administrator password or a confirmation, type your password or click continue .

  1. In the System Restore dialog box, click choose a different restore point , and then click Next .

  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next .

  3. Click Finish .

     The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Here is a link to the system restore, if you would like more information

  http://support.Microsoft.com/kb/936212/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Home Premium Screensaver Aurora and the energy of Windows

  Since 3 weeks I have had really bad luck with 2 of your screensavers and my 4 graphics cards. I'm not sure what kind of screensavers guys do but 2 named Aurora and Windows energy should never have been released to the public without testing, including the impact on your GPU and overheating.

  In the last 3 weeks I was troubleshooting problem vista Home Premium 32 - bit Windows and freezing issues. Card provided with the computer was GeForce 6150 TO work for about 2 months and then computer began to do bad things, freeze, stop, don't work sometimes and some other questions. I thought it was bad GPU so I replaced it with my HIS ATI Radeon X 1950 Pro, this card gave me warnings 12 hours after it has been installed that card is running a little hot and the ATI software will lower FREQ map. This card lasted about 2 days and he died too, but this time model would be just weird points and not whole screen is unreadable. I installed the program called the fan speed to monitor and record what is happening with this card. Computer has been used for business only IE and a few other small programs where ran, no games or anything. Since my last card was fried I replaced it with my GeForce 7900 GT OC, this card gave me the nice amount of needed data, but at the same time, this card lasted only 3 days.

  I thought as the fans run at full speed and becomes pleasant cooling perhaps is the PCI-E slot which is a short or something, wrong.
  Today I went to the store to buy PCI card, got nice $65 GeForce 6200 and plugged in, the fan speed is ready to record everything, Idle temperatures where 41 C for 47 of the CPU and GPU. I was doing some defragment and antivirus, trying to run the CPU at 100% and record what is happening that I was also running Media player and other programs with Visual effects to see if I can push this cards Temp. above its limits, after 2 hours of messing around with this, I gave up and is gone to smoke a cigarette, returned screensaver has been running (Aurora btw) off and checked the temp. Newspaper.

  Fan speed showed warning and GPU temp to 85 C. Then I then and tried the same thing on the screen saver Windows energy and got the same results, just go inside the screensaver and clicking on Aurora screensaver will bring your cards temp at least 5 c in a second.

  Since I do not use Vista (and will never) on my home computer, I was wondering if someone with the GTX 200 series can try and test this point and see how many temp. changes on his rig during this operation. I my rig with windows XP pro and don't know if I can get Aurora or energy of Windows XP to test it on my GTX 260 sli.

  Thank you

  I would check the power supply. A screen saver will NOT cause to burn three cards. MCDST
  A founding member MCITP - technician Support Enterprise-
  MCTS - Configuration Vista - Charter Member
  MCTS - specialist licenses in Volume, small and medium-sized organizations - Charter Member
  MCITP - Consumer Support Technician
  MCTS - Windows Server 2008, Active Directory Configuration
  MCTS: Windows Server 2008 Network Infrastructure configuration

• User of Vista Home Premium (preload), KB2742595 and KB2789642 fail to update/pre-installed to update. Any suggestions?

  I am user of Vista Home Premium (preload), two important updates: KB2742595 and KB2789642 fail to update/pre-installed to update (tried on more than 1 occasion, individually and collectively). There have been other updates since that successfully updated. Any suggestions? Thank you very much.

  See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/5b39ddc7-8b23-4459-9bf4-c1e0d6c07437

• Operating system of Windows Vista Home Premium 64-bit and Web folders

  I have a person how contacted me via his personal computer.  The laptop runs Windows Vista Home Premium 64-bit operating system.  He tries to use his web folder.  The system is up-to-date on all Microsoft Patches, including Service Pack 2.

  When you try to add a network folder by using the network location feature add to create the web folder a message occurs the link is not valid not a folder.    However, I know a valid folder because it works on Windows Home Premium Service Pack 2 32-bit very well.

  Yet once, why he does not on Vista Home Premium Service Pack 2 64-bit?  Y at - he of the additional fixes that do not appear on the Microsoft Update?

  I also have the same problem. The KB907306 does nothing for my system.

  Any other ideas?

• I need to reinstall Windows Vista home Premium, but I don't have it on the disc, I got a serial number.

  I've upgraded to windows 7, the upgrade requires a previous version of windows must be installed before it can be used.

  When I installed the upgrade first, it worked perfectly, unfortunately I do not have a set of recovery discs before upgradeing from Vista to 7 (stupid I know!).

  I bought the components to upgrade my PC and want to reinstall windows, but cannot without Windows Vista Home Premium disc, and I can't find anywhere to download them, or find someone willing to let me copy their discs (I only need a copy discs, I have my own serial number).

  True to form, I also forgot to make disks of backup to my laptop before it got a virus (edition windows Home premium), feeling very stupid.

  If anyone knows where I can get copies of these discs, it would releive a lot of stress.

  That you have a legable Vista product key, then use these installation files to make a .iso and then bootable DVD/USB as shown here:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/Microsoft-Windows-and-Microsoft-Office-downloads.aspx

  This will install Windows Vista with the activation of the phone. Note using your Windows 7 update product key directly with the good Windows 7 .iso file directly should work and you should not need to install Vista. You can, or perhaps not to activate by phone.

• I have windows vista Home premium in Greek language. Can I change the language, if so, how?

  Original title: windows language

  Hi.I has windows vista family premium in language Greek. Can I change the language, if so, how?

  Thank you

  Hi adiadm,

  You can read the following article to learn more about Language Packs and Language Interface Packs (LIP).

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

• Uninstall Vista Home Premium 32 bit and Windows 7 Home Premium 64 Bit installation

  How do I format my C: so that I can install my new WIndows 7 Home Premium 64 bit?  My system is compatible for 64-bit.

  When I try to format C: my system does not allow because of the Vista OS.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  How to do a clean install with Windows 7

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• "Library not registered" in Vista Home Premium in network and sharing Center trying to activate the password protected sharing.

  Trying to activate sharing protected by password in the network and sharing window I get the error message "library not registered. Also, in media player, I get always an error of sharing multimedia. I think that the 2 mmight be bound. PLEASE HELP ME!

  Hi Dj,

  When he the accur first question?

  Have you tried a system restore to a point before the question accurred?

  You can follow the procedure as described below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow steps 7 to place the computer in his usual when you finished the clean boot troubleshooting

  Do the system restore to a date preceding the accurred question according to the link below:
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Reply back with more information for you to help

  Kind regards

  Kiki

• I am trying to install a printer/scanner HP F4400 on Vista Home Premium 32 bit and may not have to install.

  HP has me turn off the firewall, hide windows programs, uninstall HP System.  I also cleaned the registry, disk and defrag, I also downloaded the hotfix from Microsoft and it is impossible to identify the problem or difficulty there.  At one point I could get to download the software before I would get error messages or #33472310 and 25672887.ZIP.  Now I can't get that far, I get to the point where he say he prepares the system for installation when it stops with the message "the system cannot ind specified path. I'm not now about to install I was Sunday when I started.  Can anyone help?

  Hi Julien,

  Please provide the complete error message you receive when installing the printer software.

  I suggest you try the following steps:

  Step 1: use the Windows Installer Cleanup utility for delete all entries that are associated with the product that you have trouble to install (printing software):

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

   

  Step 2: Put the computer to boot and then try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ordered to Windows Vista Home Premium after June 26, but do not have the Windows 7 upgrade! (Komplett.no classified)

  I ordered Windows Vista Edition Home Premium on 27 or 28 June. I ordered it as well as new pieces to my PC (including a hard drive). However, I have not received the upgrade to Windows 7. He has been ordered to Komplett.no which offers upgrades to Windows 7.

  You can check with Komplett.no
  and/or
  Frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services

• My activation key for vista home premium OEMAct is denied because no valid by the online activation

  activation is Moose but I don't know why he isn't acceped, I have a sony vaio vgn-cs110E when I buy the laptop, it came with home premium, but I upgraded to ultimate and it was fine, but now I have to install a clean version of Home premium it request an activation key, so I put in one that came with my laptop but its doesn't and it says its not a valid key. I'm doing something wrong?

  http://www.Microsoft.com/Windows/Windows-Vista/quick-start/activation-FAQ.aspx

  Quick start: Activation FAQ

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person.

  See you soon.

  Mick Murphy - Microsoft partner

• Running IE8 on Vista Home Premium.I cannot create a backup to restore the system.

  The error is 0x800423F3. A snapshot could not be created for the following reason, that the writer has encountered an error transitional 0x800423F3. The instructions you sent seem to be for Windows7. I was able to stop WMI (a warning appears saying that this action would have an impact on the Security Center, ForceWare IP and IP Helper service. In any case, I still get the same problem. "A snapshot could not be created. Teh writer has encountered a transient error...

  Hi tedfms,

  You can try the following steps to see if it helps with your problem at all:
  It is a solution that has worked for others with the lapse of the well-known writer, 0x800423F3. He has contributed to: WAW8

  Try the following:

  
  1) start the computer in Mode safe mode without network.
  
  2) open an administrator command prompt
  
  3) type "net stop winmgmt" without the quotes and press ENTER to make sure that the WindowsManagementInstrumentation (WMI) service is not working.
  
  4) go to the windows\system32\WBEM\ and rename the drop folder.
  
  5) reboot and restart normally
  
  6) open an administrator command prompt.
  
  7) type "net stop winmgmt" without the quotes and press ENTER to stop the wmi service.
  
  8) type winmgmt /resetRepository and restart the system.
  I hope this helps.