Preparing to move need FrontPage comments on my assumptions

Similar Questions

• character movement needs fine tuning

  This code to move my mc hero around the screen.

  However, when you click directly below or above the mc it does not move. When I say directly above, I want to say the angle distance. That is to say: I am well above the mc, but it does not move.

  Kids are going to read that and he needs to be more sensitive, or they feel frustrated.

  var speed: Number =. 99;

  public void onEnterFrame(event:Event):void {}

  var xDistance:Number = clickPoint.x - this.hero.x;

  var yDistance:Number = clickPoint.y - this.hero.y;

  if (Math.abs (xDistance) > 10) {}

  var angle: Number = Math.atan2 (yDistance, xDistance);

  this.hero.x += v * Math.cos (angle);

  this.hero.y += v * Math.sin (angle);

  { } else {}

  this.hero.gotoAndPlay ("static");

  }

  enemy1.x = speed * enemy1.x +(1-speed) * hero.x;

  enemy1.y = speed * enemy1.y +(1-speed) * hero.y;

  if (clickPoint.x > = hero.x) {}

  this.hero.gotoAndPlay ("right");

  / / trace (Math.abs (xDistance));

  }

  if (this.hero.x > = clickPoint.x) {}

  this.hero.gotoAndPlay ("left");

  / / trace (Math.abs (xDistance));

  }

  }

  Glad I could help!

• Need layout comments

  Well, I don't exactly know if I love this layout or the look, but I could use some professional eyes here... Trying to tie in the tech look, circuit board of the banner in the video page layout on this page, but maybe the lines are too varied or boxes around the video title too big?
  
  Playing with it for a while, need comments. Also, have you quite quickly and easily load the page and play the videos? Or was it more than 10 seconds?
  
  Thank you very much
  KO
  
  http://www.enhancedwireless.NET/technology/ODMA.shtml
  

  Hello

  > Well, I don't exactly know if I love this layout or the look, but I could use some
  > professional eyes here... Trying to tie in the eyes of tech, circuit board of the
  > banner in the page layout video on this page, but maybe the lines are too varied
  > and/or boxes around the video title too big?

  One thing I don't like is the menus. I hate the menus where you do not get the
  the finger. Also the floating side menu... that just so 2004 :)

  The main menu also disappears if images are disabled. It is a serious
  accessibility/usability problem. It would be a better choice in an img
  swap menu http://tjkdesign.com/articles/using_real_images_in_menus.asp

  Not to mention that I think you are close to the technical aspect. Perhaps a contrast
  color somewhere would remove printing "pastel". A
  strong orange (the logo which BTW could be bigger that sounds good)
  in the menu and perhaps on the topics would do the trick.
  >
  > Playing with it for a while, need comments. Also, could you easily
  > and enough fast to load the page and play the videos? Or was it more than 10
  > dry?

  I'm on a connection of 8 mbit and load in 10 seconds for me... but
  probably not the connection speed average!

  Kim

  >
  > Thank you very much
  > KB
  >
  > http://www.enhancedwireless.net/Technology/ODMA.shtml
  >
  >

• Need some comments on this license I should buy.

  I have 2 servers to virtualization in. 2 8 CPU cores to come. We probably 5-6 virtual computer running. I thought I have to go with vSphere Essentials or Essentials but I'm confused about one thing. In the past I have vCenter Server installed on a dedicated server on. Is it an additional license or come Essentials and Essentials Plus with that? Can I just install vCenter on a virtual machine on one of the 2 hosts or to be on its own box? Some have started the installation of the last one I made in measuring and licensing and everything and then I took over. I am very familiar with Veeam and was looking to go down this path and and replicate by using these 2 servers. Is there another function, I need to really consider paying the extra money for the more version?

  Thanks in advance,

  Keith

  Is it an additional license or come Essentials and Essentials Plus with that?

  vCenter Essentials is part of the Essentials and Essentials Plus kit.

  Can I just install vCenter on a virtual machine on one of the 2 hosts or to be on its own box?

  No need to have dedicated host to vCenter server, you can run it in a virtual machine in one of these two ESXi hosts, you're going to have. Just make sure that you have enough resources left to run your production on these hosts workload after your management as vCenter server etc..

  with respect to the use of alternatives to backup/replication of third parties who use the vSphere API, Essentials would do the job. Don't consider using Essentials more if you need these good feature as vSphere Hypervisor, vMotion, high availability, Data Protection, - vShield Endpoint, vSphere replication see more at: https://www.vmware.com/products/vsphere/compare#sthash.GZQ46vix.dpuf

  So if you spend money on much more, you will then go to third-party solutions for backup/replication, because he will then be part of the solution as you have the right to use vSphere Data Protection (WTP) and vSphere replication as it is.

• Using the CF grid, need to comment on the creation of editable columns.

  I have an attempt at creating a page of recipes,

  Issue 1:

  Columns will have the days of the month - don't know how to do this without hard coding in it, but I would like to somehow fill it dynamically.

  The data will be from a database:

  https://bubbl.us/view/2788d1/5195a9/25F4oONgeDEtU & r = 1719403621 /.

  2nd question:

  How can I match the entry in the database with the appropriate column.

  There might be another way to make who I am open to, can't seem to wrap my head around this issue.

  Any contribution is appreciated.

  Everyone is away from the Coldfusion user as cfgrid controls Interfaces, as they are dated. Use the editable grids provided by Javascript libraries, for example, Slickgrid.

• Is it possible to export a movie with .mp4 format?

  I've prepared a movie to post on YouTube. And YouTube says it needs of videos in the .mp4 format so that it can process quickly. So I need to export in .mp4 but I still can't find the way to do it. Please help: C

  Thank you

  Arda

  Share > main file. In settings, set the computer Format. After export, use the YT uploader.

  

  Good luck.

  Russ

• Comment by Canon RAW EXIF Import

  Until LR5 the EXIF 'UserComments"field has been imported into the field of the legend of the metadata.  As a new feature LR5 continues to import all shooting information, but does not load the comment.  Does anyone know what EXIF field is now read in the area of the legend.  I use EXIFtool to put my comment in the RAW file, so I can put it as needed?

  John

  When I bought my Canon 30 d in ' 06 I started put ID info in the comments using ZoomBrowserEX field which provides Canon.  As increased my volume of photo I found 2 problems with my workflow: 1) put the identical or similar ID in a large number of images has been a real pain and 2) if I needed to change my ZoomBrowserEX comment tended to put the changes in an XMP file to the directory rather that individual will produce so to move an image left the ID behind in the old directory.  To automate the workflow more I started to use exifutils www.hugsan.com to insert comments into the EXIF:UserComment field using a batch file.  Around the same time, I started using Lightroom (I think version II) who picked up the EXIF:UserComment domain and placed him in the legend as shown in this screenshot:

  

  I used exifutils rather than EXIFtools, which does not directly support the comments of several entry lines.  From LR3, with ZoomBrowserEX could not import inserted comments, but those inserted with exifutils would be important.  As near as we could find the end of the line codes used by ZoomBrowserEX caused problems LR while the CRLF inserted with exifutils was OK.  Due to several problems with exifutils, I could imagine a workaround for inserting comments from multiline using EXIFtools with the command line: perl C:\EXIFTOOL\exiftool.pl "-UserComment.<=Cmt" 1401c_0989.cr2="" after="" creating="" a="" multiline="" id="" file="" named="" cmt. ="" using="" exiftools="" i="" have="" been="" working="" to="" extract="" the="" comments="" inserted="" with="" zoombrowserex="" and="" reinsert="" them="" using="" exiftools="" which="" is="" time="" consuming="" for="" thousands="" of="" images. ="" lr3="" and="" lr4="" have="" consistently="" imported="" these="" comments="" to="" the="" caption="" field="" as="" shown="" above. ="" somewhere="" in="" the="" last="" updates="" to="" lr4="" or="" the="" new="" lr5="" these="" comments="" are="" no="" longer="" imported. ="" i="" have="" verified="" by="" having="" lr="" export="" the="" metadata="" to="" an="" xmp="" file,="" as="" it="" does="" automatically="" with="" raw="" images,="" that="" the="" exif:usercomments="" i="" inserted="" is="" in="" the="" xmp="" export="" for="" both="" images="" where="" the="" comment="" formerly="" imported="" to="" the="" caption="" and="" those="" where="" it="" does="" not="" import="" now. ="" the="" only="" difference="" in="" the="" image="" structure="" is="" what="" formerly="" imported="" no="" longer="">

  I think, but does not guarantee that I have the chronology above completely correct.   Having satisfied thousands of unidentified Dad's photos, I try to do that mine localization and subject data physically in the picture and not in a file that can be lost.  I need the comments of several lines that do not appear in the Canon ZoomBrowserEX and Digital Photo Professional like Lightroom.  If necessary I can insert the comment in several locations within the image, but I really need to know where, in the mysterious depths of files from RAW Canon LR can Pick-up a comment and place it in a displayed field.  The legend is kind of practice, but another may do just fine.  I also need to process RAW files from Canon 30 d, 70 d and S95 as well as any camera, I buy in the future.

  Thank you very much for your help.  I'm under 64-bit Win7 on an I3 processor. I think I started with one of the middle of LR2 versions and have done at every update since they were issued and bought two upgrades months after they come out.  I like to use Lightroom despite some limitations, but who need to constantly refer to an another installer of my keywords is a real pain.

  John

• Spawning multiple instances of a sprite (shoot the balls).  Need help.

  Hello.  I am currently doing a game in director 11.5 for a University project.  I decided to make a scrolling space shooter, but I encountered a problem.  A tutorial I found has created a limited 'Bank' of the balls of fire, allowing only a number on the stage at one point.  What I have to do is to let a single sprite ball off the edge of the page and copy essentially he and behaviours lingo to spawn another instance of the ball on the scene when the player fires (using the left button of the mouse in this case).  I also need this copy should be deleted entirely when it collides with an enemy or leaves the boundaries of the stage, otherwise the game will just run more slowly and more slow several shots are taken.

  I heard that it is possible using the puppetSprite() method, but the API is not shine much light on the issue and no a literally hours of searching on google.  If anyone can let me know any method to do so, I would be very grateful.

  On a related, when matter fired the bullet will need to intsect the situation where the mouse cursor was when the bullet was fired and then continue on a linear trajectory.  I worked on a method to do this, but it's not very effective or efficient (the speed of the balls would be determined by the cursor of the mouse is how far from the ship of players and I think that there is probably a less intensive calculation method to achieve) and as I can't spawn bullets from now I really don't know if it will work yet.  If anyone has any advice on how to best implement this mechanic, even once, I'd appreciate your comments.  Thanks in advance.

  -start-up of the main script, movie named "main script.

  on startMovie

  _movie.idleHandlerPeriod = 0

  end

  on mouseDown

  Bullet = script ("ball script") .new)

  end

  -end of movie script
  -start of the script of the frame, frame script named 'script-framework '.
  on exitFrame me
  go part
  end
  -end of the frame script
  -beginning of the script of the ball, parent of script named "ball script."
  bulletSp property

  minY property

  pObjTimer property

  the new me

  -create sprite

  -find an empty channel from the channel in the foreground

  CNT = _movie.channel.count

  Repeat with i = cnt until 1

  If sprite (i) .member = (member 0 castLib 0) then

  -make sprite

  bulletSp = channel (i) .makeScriptedSprite (member ("bullet"), _mouse.mouseLoc)

  bulletSp.scriptInstanceList.add (me)

  minY =-(member("bullet").height)

  -start moving the ball

  pObjTimer = timeout () .new ('ball' & i, 3, #moveBullet, me)

  output of repetition

  end if

  end repeat

  return to me

  end

  on moveBullet me, _objTimer

  bulletSp.locV = bulletSp.locV - 1

  sendAllSprites (#collisionTest, me)

  If bulletSp.locV<= miny="" then="">

  me. Destroy()

  end if

  end

  to destroy me

  pObjTimer.forget)

  Channel (bulletSp.spriteNum) .removeScriptedSprite)

  end

  -end of the script of the ball
  -beginning of the collision test script, script behavior called "script of collision."
  on collisionTest me, _spOrg
  If sprite (_spOrg.spriteNum) .intersects (sprite (me.spriteNum)) then
  sendSprite (_spOrg.spriteNum, #destroy)
  end if
  end
  -end of the collision test script
  1 paste the script 'major' in one of the film's script and give it the same name.
  2. double-click on frame 1 in the script to frame channel and past the image inside script.
  3. create a new script, assign a Parent script in the property inspector and stick the ball in there script. Name it "script of ball."
  4. create a new script, assign a script of behavior in the property inspector and passed the test of collision inside script. Name it "script of collision."
  5. create an image of the ball and make sure the registration point is defined to be at the high point of the ball. Name the image of Member 'ball '.
  6 Create rectangle shapes to the top of the screen, and then drag and drop the script "collision" on them.
  7 press the Play button and move the mouse around the scene while clicking the left button of the mouse to shoot bullets. The balls will be destroyed when they reach the top of the scene or when they hit a rectangle.
  8 study scripts. If you need the commented code, or a more complete explanation/walk-through of what happens in the code then let me know and I'll give it.

• Slow movement of the icons of file

  I just upgraded to Sierra and discovered that move file icons became very slow. Whether on the desktop or in a window, I can choose an icon of file instantly, but if I try to move, even a small distance, there is a long pause, and I often get the beach ball, until the icon jumps in position. In this case if I move the couple icon of millimeters right through the window.

  The same thing happens if I move a file between windows. There is a long delay, then a 'Preparing [location] move' dialog box is displayed with a process bar. Another long pause, then a quick movement of the bar and the icon jumps to the new location. Even with a copy operation. Moving to and from the trash by clicking and dragging is also slow. File used for the test was 8 k on disk, 699 bytes of content, is not large files. Movement of file in the trash by command + delete soon also. Open the file information dialog box has been the normal speed.

  I also started having very slow save as... dialog box speeds, slow opening and then slow to fill. The beach ball appeared regularly.

  Any ideas?

  Hello, N.W.J. Hazelton.

  Thank you for using communities Support from Apple.  I see your message that you met some slowness during the management of files on your MacBook Pro, since you upgraded to macOS Sierra.  I know that personally, I want to be able to move, copy, and back up things quickly, without a lot of spinning Rainbow cursor to run, so I can see why you've posted.  I'd be happy to help you.

  When my MacBook behaving this way, I found a System Management Controller (SMC) reset helped.  If you are not familiar with how to do this reset, see the following link:
  Reset the management system (SCM) controller on your Mac.

  If you always see the same behavior after this reset, then start in safe mode can tell you if a program or process could be the cause of the delay.  Follow the instructions here and test your functions copy/move while that started in safe mode: macOS Sierra: start in safe mode

  If your MacBook Pro works fine in safe mode, reboot normally and check to see if the problem has been resolved.

  Have a great rest of your week!

• Error in import of my. MOV video file in the Windows Movie Maker program.

  I tried to import my videos in Windows movie maker program and I still get the following error message.

  The file . MOV cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  I downloaded a software called of 1.40 of Prism of the internet and the software allowed me to make the format change .mov to .avi, however; When I played my video, she played in slow motion.

  Can someone help me with what needs to happen.  I used the format .mov since 2008, now all of a sudden, I got the error above in bold.

  Signed. MOV needs HELP of AVI!

  Hi Michaelle1,

  ·          You did it of any material changes or software on the computer before this problem?

  ·          Do you have any third party media player and codec installed on your computer?

  Temporarily uninstall them if you have any third-party media player installed on your computer and check if you are able to import files video .mov in Windows Movie Maker.

  Secondly, if you have any third-party codec player installed temporarily uninstall them and check.

  To uninstall codec and third-party multimedia player, you can use the Windows Cleanup utility.

  Download and install the Windows Installer Cleanup utility from this link:

  Description of the Windows Installer Cleanup utility

  Now, run the utility ("' start > all programs > Windows Installer Cleanup" "). In the list of programs displayed in the cleanup, select programs, and then click on remove. Quit out of cleaning.

  Or uninstall programs feature & programs in Control Panel.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Reference:

  Import video, photos and audio on Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

  A problem of importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Comment of tables and columns are included in the Data Modeler

  Hi all
  I used Oracle SQL Developer Data Modeler (Version 3.0.0.665) and created a data model for my project. I sent an email a PDF version of the data model to our systems analyst. She asked if I could re - create the data model and include table and column comments. Is this possible and if so how this work is it?
  
  Thank you for your comments,
  
  Seyed

  Seyed salvation,

  I used the Data Modeler and create a report. The report included 36 .csv files

  What is the purpose of this 'report' task, because 36 files csv does not sound like report to me. Watch "files > reports" feature - you can generate reports for your model. -for any model, single table or tables belonging to specific subview. The report of the complete table contains additional details, so if you need these comments, then only you can create a template and select column comments appear only. So some general information table will be also included.

  Philippe

• Preparer of the change request submit it after

  Hi all experts...
  
  I have a situation of order picker, this situation is:
  I want to change the order picking, while the application is submitted (which means status = rejected, returned, In Process, pre-approved or approved). I know you have questions about this situation, why you need to change the preparer?
  
  I need to change the preparer because sometimes:
  1A retired.
  2. has left.
  3. on vacation and he did not have a delegation.
  4. .. etc., there are many cases may need that.

  Hi, Ahmed.
  We're sorry, we couldn't be able to find a workaround for you: (...) Since you are using a lower version of R12, there is no such a request is to change the name of applicant trainer in 1 GB... Karthik & Shivraj also gave their valuable contributions, but it seems that nothing works for you...

  Would you mind to ask the same question to Oracle via a SR Oracle? Make reference to the version of Oracle Apps you use...

  Oracle can give an idea of box, you never now out... Just give a try.

  Kind regards
  S.P DASH

• error code 80096004 how to fix

  update of Windows has error code 80096004 how to remove

  Hi Gerald,

  If the spirit messages ae out of your reach, it's OK.  BSOD problems are difficult for even the best of us and sometimes even if we do all that is there and even more, we still do not solve the problem.

  I offer the following choices at this point (we'll talk about the order of them later):

  1. try an installation of repair as explained here: http://www.sevenforums.com/tutorials/3413-repair-install.html.

  2. try a clean install of Windows 7 (from scratch in essence).  If you move from Vista to Windows 7 with a upgrade disk, use this tutorial: http://www.sevenforums.com/tutorials/31402-clean-install-upgrade-windows-7-version.html.  If you move from Vista to Windows 7 with a full Installation disc, use this tutorial: http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html.  If you want to do a custom installation of Windows 7 instead of a clean install to preserve some of the old information on the system (which may be good or may retain the cause of the problem but this is rare), use this tutorial: http://www.sevenforums.com/tutorials/20146-custom-install-windows-7-a.html.

  3 do a more complete test of your hard drive to confirm that this is not a failure (as the loss of information like this, more past issues of BSOD makes be think bad hard drive).  To test your hard drive, check the manufacturer and try to diagnosis HD (http://www.carrona.org/hddiag.html) or this test: hard drive diagnostics tools and utilities (storage) - Corp of TACKtech (http://www.tacktech.com/display.cfm?ttid=287) or see if the manufacturer of the computer or the hard drive manufacturer have their own diagnostic utility you can download and run (which could be the best (, as it is sure to be very specific and current for this drive).  If it fails the test, replace it and then see option 2 above, making sure to add the appropriate when installing drivers.  If it is bad, it can fix everything once you reinstall everything.  On the other hand, even if it is bad, while replacing it will help and may be necessary anyway (or at least should be done if you intend to keep the computer), there is no 100% guarantee that it was the only problem or replacement can all solve.  It is likely, but not a guarantee.  You must decide if the cost is worth it to test a solution likely but not proven to a known problem but not necessarily or only behind the problems you encounter.  Of course, if it comes with a money back guarantee, making the choice a little easier because if it does not, you can always return it little or no cost.  But given your level of understanding, while trials may be possible, I suspect you will need help if turned out to be bad and you decide to replace it.

  4. find a reputable computer repair shop (not Geek Squad, but one that has true professionals, a long history and wonderful comments from reliable sources) or see if the computer manufacturer will repair it if you ship to them (and compare the cost, schedule, guarantees and other factors--like buying a place to fix television or a car).  A parent, friend, neighbour, who will do the work for free with you pay only for the parties can save money, but to ensure that this person doesn't REALLY know what he's doing and you select not based on your social interactions or dealing with someone who says he knows much more is actually true (and as all these choices that can turn out to be a great victory or a great regret - it may end up a lot cheaper) or maybe find themselves much more expensive as well as risk to your personal information or to do things which are only slightly hurt much more serious - but it is a risk in a way with whoever you choose).

  5. prepare to move this computer in the basement and start again with brand new and transfer computer only your important data to make sure that you don't move potentially cause old problems to the new computer.

  In some cases, you can try several of these options or, depending on your choice, one may be required.

  Given what you have said, I would say try option 4 if it can be done economically reasonable or it will cost almost as much as a new computer anyway, then go with option 5 (assuming that you have the money to one of these - a big assumption on my part that only you can decide to do).

  If you don't have that kind of money on hand (I of course know this feeling - LOL!), so I'd try just the part test option 3 to verify that the hard drive is OK (and hope it passes) and, if so, first try option 1 and if this does not work, then try option 2.  Of course if they are out of your reach, then to options 4 or 5 are really your only choice.

  Where do you live?  If the United States of America, in what state?  If Maryland, what city?

  I hope this helps.

  Good luck!

  Kosh

• ReadyNAS 104 reports complete disc

  Hi guys,.

  I have read this thread 16 whole page and almost feel I have to now you know.

  Anyway, it was very useful to know more about all your attempts and "beta test" I know what not to waste my time on.

  As you probably understand, I have the same problems as you.

  I have a 104 with 2x2TB and 2x4TB. The last one (I will refer to the TB 8 disc later) is the stroller one.

  The problem started when I decided to UN - rar batch 5 TB of movies. It was working perfectly until a few days ago, and now my drive is completely 'blocked '.

  I can simply write files more than a few seconds before it gives up. According to the SW in use, the error messages varies between "network drive is not accessible" to "memory" in the "network name is already in use" and so on.

  -Downloading files from the internet at 60 KB/s works for a few minutes stops with one above error messages

  -Decompression of files more also the result in an accident. It can stop after 20% or 95%, which seems random. But it never ends.

  -Copy of the files using the Explorer does not work. "The disk is full.

  -J' tried to use two different machines to Win7 and a Mac. No difference of result, but as mentioned, the error messages varies.

  -Up til these attempts I thought that it was kind of a network problem or SMB protocol problem, so I tried connecting directly to a computer using the other NETWORK card - but not to prevail.

  -Finally, I tried to move about 500 GB of the 8 TB drive (2x4tb) for the other RAID (part 4 TB of 2x2tb). I used the web interface for this operation and it worked perfectly.

  -J' have decompressed the files in the sharing of 4 TB, then prepared to move them using the web interface.

  -Who... wait what he... DID NOT WORK.

  -J' I try to drag a file to a share to another action, and the web interface starts the process of moving but give 4 seconds without error message.

  Most of this was trying to use OS 6.2. I've now upgraded to 6.2.5 but it has not changed anything.

  The share of 8TB is about 50% full and I cannot write any files of more than a few seconds before crashing.

  However, I noticed in the paper that the unit reported the '70% full' long, but just before it happened he reported that '93% ' full which is very strange that the decompression process should not increase the disk space (files had no compression, and each rar archive has been eliminated after unpacking successful).

  Windows also reported a fairly full disk, and I have not had any contact with the NAS. Also my user name and password is not valid, and I made a reappattage of the whole OS it is up and running.

  But still, the share of 8TB is now useless because I can't add all the files and I probably need to buy a new drive to store my files until this issue is resolved (I'm strongly considering buying another NAS).

  Edit: I've added a screenshot to illustrate the behavior. This example is torrent files.

  

  The volume has been fully allocated and the distribution of metadata was full.

  Via Teamviewer, I managed to change that and now a balance is running. As a balance never managed has been run on the volume until it will take some time.

  I recommend you to plan a balance to run every few weeks or if at a time when the NAS is slightly used.

• I get the error message "there was an error of analysis of the data on your system" when you try to use Windows Easy Transfer

  Original title: there was an error of analysis of the data on your system

  I get this error when trying to use Windows Easy Transfer to prepare to move from an XP PC to a Windows 7 PC. It passes through the part of the selection on where I later import files then says he is scanning the disc and fails with the above error.

  In the search for this error, I found information of 2007 could be be a nero problem AVI.  I don't have Nero installed and I can't find the log files in the directory MIGWIZ.

  It is a small (50 GB) HD who do not have much space available on it (I'm not in front of it now).  Is there a minimum amount of free space needed to run this executable? That is why it is a failure?

  Could there be other issues behind this failure?
  Thanks in advance

  Hello

  Follow these methods and check if that helps.

  Method 1:

  I suggest to download from the link provided below windows easy transfer tool and install it and then try to transfer the data back.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Method 2:

  Refer to step 2 and step 4 from the link provided below:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

   

   

  Method 3:

  I recommend you to try different types of transfers using different media. You can also do a disk clean up of the Windows XP computer. Remove unwanted programs from the Windows XP computer. Do a disk clean, right click on the C drive, and then click Properties. Clean, then click on the disc.

  For use with different media windows easy transfer, you can click on this link for steps to follow:

   

  http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

   

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions