Re: efax on HP 7510 registration. Printer is connected to the internet but says efax said record n

Similar Questions

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• HP Deskjet 3510: Printer not connected to the Internet after new router purchase.

  After buying a new router, printer does not work. Is not connected to the Internet. I followed the instructions on how to connect but nothing I did helped. Wireless test results show the printer are currently configured with an automatic IP address, I don't know why or how this happened. Also shows that wireless and wireless is working and success to the configuration of the printer, just not connected to the Internet.

  Yes you will need a printer USB cable like this.

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?ie=UTF8&QID=1458167924&SR=8-1&keywords=printer+USB

• HP Officejet Pro 8610: printer directly connected to the Internet

  I'm trying to register for the HP ink cartridges.  The application calls a code to write on request.  However, the printer tells me that Web services are not enabled on my printer.  How can I connect a printer directly to the Internet.  I use a USB cable to connect the printer to my laptop.  Can someone help me so that I can complete the application of the ink?  Thank you!

  mcbrighde

  Hello @mcbrighde,

  Welcome to the Forums of HP's Support. I understand you are trying to join the instant ink program, but need assistance in obtaining your printers code request. I would like to help.

  In order to get the printers claim code, you will need to have the printer on a wireless network. An ethernet or LAN connection will also work. This will give the internet access to the printer so that the ink levels can be monitored.

  You need not remove your USB connection for the printer on the wireless network.

  The following link will help put your Officejet Pro 8600 on the wireless network.

  HP OfficeJet printers - printer wireless (Windows) installation

  Once the printer on the network, tap the icon of ePrint/Web Services to enable Web Services and acquire the printers claim code. The icon you are looking for is in the lower left corner of the screen printers.

  

  You can also use the following link to view more detailed instructions.

  HP - service and using HP ePrint printers

  If you need further assistance or have any other questions please let me know.

  I'll be happy to help you.

• eFax: not connected to the internet error

  I have a Photosmart 7510, running on Windows 8 (which shouldn't matter, since my question).  All internet connections are fine, except eFax custody claiming that I am not connected to the internet.  I have tried to change the DNS by hand, reset the cable modem, router, and web services and even to set the printer to the factory settings.  Nothing works.

  Hello

  Try to use another DNS such as Google Public DNS server and check to see if that can help you:

  Set the DNS server in the printer as follows:

  Primary: 8.8.8.8

  Secondary: 8.8.4.4

  Also make sure your location is set correctly, it can strongly influence any web related services.

  You can to set your region of clickign configuration icon, and then select Prefereces.

  Click Set country/region, and then select your location.

  Shlomi

• eFax already register, cannot connect to the internet.

  After tapping on the eFax print application, you receive error message "unable to connect to the internet, please activate the web services or connection eFax app."

  Steps below are ONLY if your eFax app had previously been setup.  A problem of synchronization as the eFax print requires HP Web Services to connect to the server.

  Note: eFax Soft printing is ONLY available pre-installed on select HP printers.

  1. press on the icon of web services in the upper left corner of your printer.

  

  For the brief moment the printer say loading its actually re-sync with the server ePrint to load the email address of the current x.     You should be able to press home, then press print eFax app for the previously saved eFax number.

  

  NOTE: ePrint service: STOP will cause the same error message as ePrint is required to connect to the internet.

  Press settings.

  

  Tap ePrint, then tap activate ePrint characteristic of service.

  

  Try tapping the Home button, then select eFax print app to see a previously saved eFax number.

  Note: If it does not, the selection to print the report in the web services menu above requires the printer to reconnect to the ePrint server and automatically resynchronize with eFax server.

  2. If the previous steps do not resolve the "cannot connect to internet" error message, you may need to adjust the network settings on the printer.   See post below.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/unable-to-connect-to-Internet-through-...

  ________________________________________________________
  Say 'Thank you' by clicking on the Blue Star of congratulations in the post helped you.
  Please indicate the position that solved your problem as "accepted Solution"; Therefore, it is easier for others to find.

  I am an employee of HP.

  Thank you!

• When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

  PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

  You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

  If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  

• printer does not work it tells me not connected to the internet

  my printer just stopped working.it says it is not connected to the internet.it was before.

  Exact wording of this message?

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• MY HP PHOTOSMART 7520E PRINTER IS NOT CONNECTED TO THE INTERNET

  I have a wireless printer HP Photosmart 7520e and following a power failure, I lost my Internet connection.  The printer works fine without any other problems, but for some reason any that it does not connect to the Internet. Appears on the printer 'wireless Direct' but it is not connected to the Internet.

  Hi filgrastin,

  Thank you for your answer! I have a few questions for you:

  • You are using a Mac or Windows operating system? What is the version number? To find the exact version, visit this link. Whatsmyos.
  • How far is the printer from the router?
  • What falls down on the Test report wireless?

  Here's how to print a Test report Wireless:

  • Load the white plain US letter or A4 paper in the tray, if it is not already.
  • On the Control Panel, press the Setup icon, and then tap on wireless. Wireless menu.
  • Press the Test report print wireless. The printer prints the test page.

  If you are running Windows, please try our HP print and Scan Doctorand let me know what happens.

  We hope to hear from you. and have a nice day!

• Install the device driver of printer not connected to the computer

  My printer is too old to connect to my new computer.  I want to "print to a file" and move the file to another computer on which the printer connected (this second computer is not connected to the internet). How can I install device driver on the new computer with no attached printer?

  Hello

  1. What is the brand and model of the printer?

  If you want to move the file to another computer, you can copy the file to the flash drive and move to the other computer, so that you can print the file.

  Check out the links.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  http://support.Microsoft.com/kb/308028

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://support.Microsoft.com/kb/293118

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/move-files-and-settings-to-new-computer

• Everything I print gets stuck in the queue, but the document is printed

  ORIGINAL TITLE: Spooler

  I installed a printer on a pc windows 7 64. Everything I print gets stuck in the queue, but the document is printed. The printer is on the network, I tried to restart the spooler and erased the record of the spooler, but perisisted of the question, given that the document gets stuck, no other agency will be able to print, remove the paper and print again to print but the file gets stuck again on the queue. I tried to change the IP address, but the same thing happened. Can someone help me?

  Hi, Omorguz,

  Printer brand and model, if you please.

  Start > run > type services.msc

  Press enter

  Scroll down to print spooler

  Select stop

  Let Windows stop the spooler

  Control Panel > printers and Faxes folder

  Right-click on the printer icon, then select open

  If you see pending orders in the queue, select the

  Click file > cancel all Documents

  If a job shows the deletion, but never finished, open the command prompt window

  Start > run > type cmd

  Press Ok

  Enter Net Stop Spooler

  Press enter

  Wait for the DOS window opens and is

  Open the command prompt window

  Type Net Start Spooler

  Press enter

  If that does not cancel the print job:

  Your directory of spools Windows XP is located at

  C:\WINDOWS\SYSTEM32\SPOOL\PRINTERS

  It will usually contain files like these:

  FP00008
  FP00008. SHD

  There are two files for each remaining print job.  Just delete these and restart the computer.  Your queue should now be provisioned.

  If you are printing over a network, and the queue is not clear after the above steps:

  Go to the computer that has the shared printer connected and perform steps 1 & 2 above.

  If this does not work, then go to the computer when he was sent to the printing of the task and perform the steps 1 & 2 on this computer.

  Run chkdsk

  Start > run > type CMD

  Press Ok

  Type C: chkdsk/r/f

  Press enter

  You will receive a message re: volume must be locked and you want to start scanning reboot?  Press y and press enter

  Type Exit to close the CMD window

  Restart the computer for the scan at startup

  This will check the integrity of your data on the hard drive of computer as well as find and fix errors that could corrupt your data or program files.

  I even recommend that you uninstall the printer and when you are done uninstalling, restart computer.

  When you reinstall the printer, reinstall it using the compatibility mode

  How to install a hardware device using the compatibility mode driver.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/80cae5ee-dc98-4A2F-8284-a1ab826059b7

  It works on Windows 7 Professional, comprehensive and business - Windows XP Mode - it's free

  It's the best of both worlds: the new Windows XP Mode allows you to run Windows XP older right on your Windows 7 desktop business software.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode

  e FAQ or choose a link from the top of this page.

• I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet.

  I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet. I updated drivers and tried everything that other people have told me to try on other forums to the best of my abilities. I'm not otherwise qualified in computer science. Also, I will mention this all started when I restored my computer laptop back to factory settings. I did it because that's all I could think about. As far as coming back on my laptop, he did do the trick. Thus, suggestions, thoughts will be appreciated.

  Thank you

  Jim

  Lima, Ohio

  original title: unable to print attachments from Windows Mail

  Hello

  The print job goes to the queue?

  Method 1:
  I suggest you through the Windows 7 steps in this document.

  Method 2:
  Alternatively, you can try to plug in the printer and the laptop to see if it makes a difference.

• Web services Officejet 8100 printer cannot connect to the server

  I tried to set up ePrint - HP connected on my Officejet Pro 8100, which, for some reason, it's own decided to disable the eprint service. When I try to connect to get the confirmation code for HP connected, this message appears

  "Unable to connect to the server.

  Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
  If your network requires a proxy server address to connect to the Internet, click Proxy enter or check your browser settings. »

  I tried all of the suggestions posted in this post-

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/cannot-connect-to-se... - but none solved the problem.

  Apart from not using web services or filing a compliant under the terms of the UCC for the guarantee of marketability, what to do next?

  Hello RealGomer,

  Welcome to the Forums of HP Support!

  If I understand your message your Officejet 8100 is more connected to the Web Services and you have tried to assign a manual IP address of the printer.

  In the link you provided I have not seen any information about which server DNS has been used, because it is usually the cause / root of the problem, try to enter the DNS name of 8.8.8.8 & 8.8.4.4. To enter, you must be in the Web integrated to the network printer server.

  If this DNS information do not resolve, I'll get another for the DNS installation program.

  See you soon,.

• Why my printer dell 968 of the internet feel used?

  Why my printer dell 968 of the internet feel used?

  Internet Explorer 9.0 was the problem.  When I tried to print it sounds internet has stopped working and then would not print.  I removed 9.0 and reinstalled the 8.0 and the printer works fine.