Need layout comments

Similar Questions

• Need some comments on this license I should buy.

  I have 2 servers to virtualization in. 2 8 CPU cores to come. We probably 5-6 virtual computer running. I thought I have to go with vSphere Essentials or Essentials but I'm confused about one thing. In the past I have vCenter Server installed on a dedicated server on. Is it an additional license or come Essentials and Essentials Plus with that? Can I just install vCenter on a virtual machine on one of the 2 hosts or to be on its own box? Some have started the installation of the last one I made in measuring and licensing and everything and then I took over. I am very familiar with Veeam and was looking to go down this path and and replicate by using these 2 servers. Is there another function, I need to really consider paying the extra money for the more version?

  Thanks in advance,

  Keith

  Is it an additional license or come Essentials and Essentials Plus with that?

  vCenter Essentials is part of the Essentials and Essentials Plus kit.

  Can I just install vCenter on a virtual machine on one of the 2 hosts or to be on its own box?

  No need to have dedicated host to vCenter server, you can run it in a virtual machine in one of these two ESXi hosts, you're going to have. Just make sure that you have enough resources left to run your production on these hosts workload after your management as vCenter server etc..

  with respect to the use of alternatives to backup/replication of third parties who use the vSphere API, Essentials would do the job. Don't consider using Essentials more if you need these good feature as vSphere Hypervisor, vMotion, high availability, Data Protection, - vShield Endpoint, vSphere replication see more at: https://www.vmware.com/products/vsphere/compare#sthash.GZQ46vix.dpuf

  So if you spend money on much more, you will then go to third-party solutions for backup/replication, because he will then be part of the solution as you have the right to use vSphere Data Protection (WTP) and vSphere replication as it is.

• Preparing to move need FrontPage comments on my assumptions

  CS 5.5, Windows XP and 7

  1. the only unique features Frontpage which I think are used are includes common data. I have my navigation bar, defined as an inclusion, and the question of foot at the bottom of each page is an inclusion. I guess if I disable Frontpage extensions on my host, each page stands on its own, and if I change the navigation bar, I have to update all the pages that include it. Other than that, I guess I can update any page without problem. I understand that the PS code is bad and needs to be cleaned.

  2. I plan to replace him includes with Dreamweaver library items. Won't happen immediately, as the data included rarely changes. I don't want to do it at the server level.

  3. I am a little familiar with CSS and HTML.

  4. shared files - at the moment we have a single site on a shared disk - Windows XP and 7. I don't know if I can continue to do - have Dreamweaver on both computers, with the ability to update and publication of the changes. It is a very simple configuration, with low rates - once every two weeks, but sometimes one person does, sometimes another, depending on the page. The pitfalls here?

  The short answer is Yes.

  However, this site is full of code, invalid, obsolete HTML and Frontpage cruft formatting tags.

  http://validator.w3.org/check?URI=http%3A%2f%2Fwww.backpack45.com%2f&charset=%28detect+aut connect % 29 & doctype = Inline & group = 0

  Set as it is not value the time and effort involved.

  If it were me, I'd start over in DW with a model of formatting CSS modern, clean.

  Nav bar etc, I would like to use the Server Side Includes rather than DW library items. There is no advantage using library items in DW.

• Using the CF grid, need to comment on the creation of editable columns.

  I have an attempt at creating a page of recipes,

  Issue 1:

  Columns will have the days of the month - don't know how to do this without hard coding in it, but I would like to somehow fill it dynamically.

  The data will be from a database:

  https://bubbl.us/view/2788d1/5195a9/25F4oONgeDEtU & r = 1719403621 /.

  2nd question:

  How can I match the entry in the database with the appropriate column.

  There might be another way to make who I am open to, can't seem to wrap my head around this issue.

  Any contribution is appreciated.

  Everyone is away from the Coldfusion user as cfgrid controls Interfaces, as they are dated. Use the editable grids provided by Javascript libraries, for example, Slickgrid.

• Comment by Canon RAW EXIF Import

  Until LR5 the EXIF 'UserComments"field has been imported into the field of the legend of the metadata.  As a new feature LR5 continues to import all shooting information, but does not load the comment.  Does anyone know what EXIF field is now read in the area of the legend.  I use EXIFtool to put my comment in the RAW file, so I can put it as needed?

  John

  When I bought my Canon 30 d in ' 06 I started put ID info in the comments using ZoomBrowserEX field which provides Canon.  As increased my volume of photo I found 2 problems with my workflow: 1) put the identical or similar ID in a large number of images has been a real pain and 2) if I needed to change my ZoomBrowserEX comment tended to put the changes in an XMP file to the directory rather that individual will produce so to move an image left the ID behind in the old directory.  To automate the workflow more I started to use exifutils www.hugsan.com to insert comments into the EXIF:UserComment field using a batch file.  Around the same time, I started using Lightroom (I think version II) who picked up the EXIF:UserComment domain and placed him in the legend as shown in this screenshot:

  

  I used exifutils rather than EXIFtools, which does not directly support the comments of several entry lines.  From LR3, with ZoomBrowserEX could not import inserted comments, but those inserted with exifutils would be important.  As near as we could find the end of the line codes used by ZoomBrowserEX caused problems LR while the CRLF inserted with exifutils was OK.  Due to several problems with exifutils, I could imagine a workaround for inserting comments from multiline using EXIFtools with the command line: perl C:\EXIFTOOL\exiftool.pl "-UserComment.<=Cmt" 1401c_0989.cr2="" after="" creating="" a="" multiline="" id="" file="" named="" cmt. ="" using="" exiftools="" i="" have="" been="" working="" to="" extract="" the="" comments="" inserted="" with="" zoombrowserex="" and="" reinsert="" them="" using="" exiftools="" which="" is="" time="" consuming="" for="" thousands="" of="" images. ="" lr3="" and="" lr4="" have="" consistently="" imported="" these="" comments="" to="" the="" caption="" field="" as="" shown="" above. ="" somewhere="" in="" the="" last="" updates="" to="" lr4="" or="" the="" new="" lr5="" these="" comments="" are="" no="" longer="" imported. ="" i="" have="" verified="" by="" having="" lr="" export="" the="" metadata="" to="" an="" xmp="" file,="" as="" it="" does="" automatically="" with="" raw="" images,="" that="" the="" exif:usercomments="" i="" inserted="" is="" in="" the="" xmp="" export="" for="" both="" images="" where="" the="" comment="" formerly="" imported="" to="" the="" caption="" and="" those="" where="" it="" does="" not="" import="" now. ="" the="" only="" difference="" in="" the="" image="" structure="" is="" what="" formerly="" imported="" no="" longer="">

  I think, but does not guarantee that I have the chronology above completely correct.   Having satisfied thousands of unidentified Dad's photos, I try to do that mine localization and subject data physically in the picture and not in a file that can be lost.  I need the comments of several lines that do not appear in the Canon ZoomBrowserEX and Digital Photo Professional like Lightroom.  If necessary I can insert the comment in several locations within the image, but I really need to know where, in the mysterious depths of files from RAW Canon LR can Pick-up a comment and place it in a displayed field.  The legend is kind of practice, but another may do just fine.  I also need to process RAW files from Canon 30 d, 70 d and S95 as well as any camera, I buy in the future.

  Thank you very much for your help.  I'm under 64-bit Win7 on an I3 processor. I think I started with one of the middle of LR2 versions and have done at every update since they were issued and bought two upgrades months after they come out.  I like to use Lightroom despite some limitations, but who need to constantly refer to an another installer of my keywords is a real pain.

  John

• Comment of tables and columns are included in the Data Modeler

  Hi all
  I used Oracle SQL Developer Data Modeler (Version 3.0.0.665) and created a data model for my project. I sent an email a PDF version of the data model to our systems analyst. She asked if I could re - create the data model and include table and column comments. Is this possible and if so how this work is it?
  
  Thank you for your comments,
  
  Seyed

  Seyed salvation,

  I used the Data Modeler and create a report. The report included 36 .csv files

  What is the purpose of this 'report' task, because 36 files csv does not sound like report to me. Watch "files > reports" feature - you can generate reports for your model. -for any model, single table or tables belonging to specific subview. The report of the complete table contains additional details, so if you need these comments, then only you can create a template and select column comments appear only. So some general information table will be also included.

  Philippe

• Spawning multiple instances of a sprite (shoot the balls).  Need help.

  Hello.  I am currently doing a game in director 11.5 for a University project.  I decided to make a scrolling space shooter, but I encountered a problem.  A tutorial I found has created a limited 'Bank' of the balls of fire, allowing only a number on the stage at one point.  What I have to do is to let a single sprite ball off the edge of the page and copy essentially he and behaviours lingo to spawn another instance of the ball on the scene when the player fires (using the left button of the mouse in this case).  I also need this copy should be deleted entirely when it collides with an enemy or leaves the boundaries of the stage, otherwise the game will just run more slowly and more slow several shots are taken.

  I heard that it is possible using the puppetSprite() method, but the API is not shine much light on the issue and no a literally hours of searching on google.  If anyone can let me know any method to do so, I would be very grateful.

  On a related, when matter fired the bullet will need to intsect the situation where the mouse cursor was when the bullet was fired and then continue on a linear trajectory.  I worked on a method to do this, but it's not very effective or efficient (the speed of the balls would be determined by the cursor of the mouse is how far from the ship of players and I think that there is probably a less intensive calculation method to achieve) and as I can't spawn bullets from now I really don't know if it will work yet.  If anyone has any advice on how to best implement this mechanic, even once, I'd appreciate your comments.  Thanks in advance.

  -start-up of the main script, movie named "main script.

  on startMovie

  _movie.idleHandlerPeriod = 0

  end

  on mouseDown

  Bullet = script ("ball script") .new)

  end

  -end of movie script
  -start of the script of the frame, frame script named 'script-framework '.
  on exitFrame me
  go part
  end
  -end of the frame script
  -beginning of the script of the ball, parent of script named "ball script."
  bulletSp property

  minY property

  pObjTimer property

  the new me

  -create sprite

  -find an empty channel from the channel in the foreground

  CNT = _movie.channel.count

  Repeat with i = cnt until 1

  If sprite (i) .member = (member 0 castLib 0) then

  -make sprite

  bulletSp = channel (i) .makeScriptedSprite (member ("bullet"), _mouse.mouseLoc)

  bulletSp.scriptInstanceList.add (me)

  minY =-(member("bullet").height)

  -start moving the ball

  pObjTimer = timeout () .new ('ball' & i, 3, #moveBullet, me)

  output of repetition

  end if

  end repeat

  return to me

  end

  on moveBullet me, _objTimer

  bulletSp.locV = bulletSp.locV - 1

  sendAllSprites (#collisionTest, me)

  If bulletSp.locV<= miny="" then="">

  me. Destroy()

  end if

  end

  to destroy me

  pObjTimer.forget)

  Channel (bulletSp.spriteNum) .removeScriptedSprite)

  end

  -end of the script of the ball
  -beginning of the collision test script, script behavior called "script of collision."
  on collisionTest me, _spOrg
  If sprite (_spOrg.spriteNum) .intersects (sprite (me.spriteNum)) then
  sendSprite (_spOrg.spriteNum, #destroy)
  end if
  end
  -end of the collision test script
  1 paste the script 'major' in one of the film's script and give it the same name.
  2. double-click on frame 1 in the script to frame channel and past the image inside script.
  3. create a new script, assign a Parent script in the property inspector and stick the ball in there script. Name it "script of ball."
  4. create a new script, assign a script of behavior in the property inspector and passed the test of collision inside script. Name it "script of collision."
  5. create an image of the ball and make sure the registration point is defined to be at the high point of the ball. Name the image of Member 'ball '.
  6 Create rectangle shapes to the top of the screen, and then drag and drop the script "collision" on them.
  7 press the Play button and move the mouse around the scene while clicking the left button of the mouse to shoot bullets. The balls will be destroyed when they reach the top of the scene or when they hit a rectangle.
  8 study scripts. If you need the commented code, or a more complete explanation/walk-through of what happens in the code then let me know and I'll give it.

• Toshiba and their Vista update

  What is the problem with Toshiba and Microsoft?

  they promise and advertising windows vista on all their computers, laptops and this was one of the reasons that encourage buying Martin one.

  Now I have my laptop, it is impossible to register for windows upgrade (http://upgradeweb.moduslink.com/Vista/). I tried 10 times and have sent emails to moduslink and not a single response. It seems even useless and difficult to get in touch with Toshiba.

  I get all my details for the toshiba satellite p100-347 and I just get either 21 messages in the end after payment:

  -There is an error, please try again later
  -You must contact customer support to reactivate your order if you cancel now

  That means the second message? Actually, my order went through. are there not any kidn of confirmation? I havn't even received any email or order number to track my order.

  > But it isn't for lack of Toshiba...

  Why lack of Toshiba?

  Windows Vista Home Premium costs about 80 EUROS, if order you it WITHOUT the coupon/flyer brand by your computer dealer.

  Question do you have a serialized form of redemption Upgrade? What has been your choice? Yes or no?

  This whole program is made not only to Toshiba, but for many other manufacturers of mobile and he will be in the company of ModusLink. The same procedure is for customers of Sony, Siemens and so on. Because of that I understood why permanent claim to the producers of the laptop.

  Contact this company ModusLink and see what they do and why is the problem. If you have a cupon valid upgrade, you must pay for shipping and handling only.

  Dear snipe, I put really t you understand. Of course, you did something wrong. Now, you're probably frustrated and write such stupid comments here. This will not help other users simply make it insecure.

  If you post here, then try to help!
  Please don t be mad me but nobody don't need stupid comments or some personal opinions without reserve.

• Atrix 4 g (stock 2.3.6) memory card suggestions

  Recently, I have lost my 16 GB sandisk sdhc class 4 memory card for atrix 4g. I need to comment on a new map, as it is to say "Go how and what grade is recommended for atrix 4 g. I especially use the device for work and store files, photos and presentations power point. any suggestion would be appreciated. Thank you!!

  Technically 32 GB is the maximum in the SDHC - but SDXC specification allows for up to 2 TB cards and some will work with SDHC - the 64 GB, being one of them, but this does NOT all 64 GB or SDXC cards will work.

  If you want to be safe, stay at 32GB or less, but if someone has a good experience with a larger map or 64 GB, it should work on your phone. This is related to hardware, software change a phone should not matter in that regard.

  Other MotoXprts have used the 64 GB cards in some of their phones and they work fine. Do not forget this, you pay a premium to get the largest on the market today. 32 GB cost well now - 64 GB were always expensive, last time I looked.

  http://en.Wikipedia.org/wiki/Secure_Digital#SDXC

• PWM output

  Hello

  I would like to know if someone could make a recommendation for me. I'm looking to use a material OR PWM output to control 2 motors. I used only for usb 6008 front and concluded that I need a different material for this, but think also that he does not need to be Compact RIO. I need something that does just what I need it to do. Just output PWM for control of 2 motors. The material to drive the motors is not a concern at this time, I'll build later. I just want to see what are the solutions the cheaper for something like this (although I know that this is not "cheap").

  Any recommendations would be greatly appreciated.

  Thank you

  Hey nano,.

  If there is feedback involved, your terms of latency will be an important factor in the choice of a hardware configuration.  In the order of latency:

  USB DATA ACQUISITION< pci="" daq="" (windows="" )="">< pci="" daq="" (rt)=""><>

  For the acquisition of data-driven solutions, I suggest to look in the series ( PCIe-6320, USB 6341) X.  These have 4 counters that support a wide range of including functionaity to generate PWM signals.  If you don't require comments, these commissions have the power output meter in the buffer.  If you need your comments, I recommend you to consider alternative Council PCIe latency is much lower than that of USB.  RT and FPGA solutions give a latency low but can be quite expensive.

  Best regards

• Example of a State-space?

  Hello;

  I'm a grad student and I got my presentation tomorrow and really I need your comments.

  I select a topic which is the ANALYSIS of the STATE-SPACE.

  The attached file has my file vi.

  I have dwsign a simple survey. control loop of l which has a transfer works then I him I convert it to a SS I do analysis.

  Appreciate your quick response.

  also try to clean your face a bit. use the tab containers or make it to where the person doesn't have to scroll down to view your items.

  and use the suggestions of Altenbach.

• Problems with USB devices in Windows XP Mode on Windows 7 Pro

  I have a Palm Zire 21 that I use with ACT! Contact Manager to keep track of my appointments.  I was able to sync the Palm with my ACT database until this week. The device appears on the list of USB devices, but does not connect to Windows XP mode.

  I used this device in XP Mode since August without any problem.  Last week, I started having problems with the integration of XP features and had to uninstall and reinstall the integration features a few times.  I think I have a corrupted somewhere driver.

  Any help would be appreciated.

  No need to comment unless you have more insight.

  I solved the problem myself.  In XP mode, I went to the Device Manager and scroll down to USB controllers.  A virtualization USB bus drivers showed a problem.   I uninstalled this device and then managed to reinstall my Palm correctly after connecting it to the USB port, and then going back to the menu at the top of the XP USB mode screen and hit connect when I saw my camera.  The device connected in XP automatically and I was off to the races.

• I can load the speed in real time?

  Hi, guys.

  I'm working on my project now. Right now I use PCI 7344, UMI-7764, AC/DC motor sevro, their amplifiers and the camera of the UAB.

  I try to repair the braiding point machine to weave leadership x. usually the Plait point oscillates around a point in x direction.

  At first, I need to get the position of the point using cam USB, I've done braiding. The positions I got the cam of the UAB is in real-time.

  Then, I need your comments the position of the motion control loop. I intend to use the position to calculate the speed that responded to the questionnaire, which is real-time, too.

  Engine going this speed. Thus, it is supposed to get that engine will decrease or increase depending on the weaving point moving.

  I don't know if we can do it. I have yet found the relative position.

  Anyway, thanks in advance. Any idea and the idea is really appreciated.

  Guangli

  Guangli,

  as the camera of feedback is coming from a USB camera and with the during the calculations necessary to analyze the images, the behavior of your system in real-time is probably not very tight. Delays and jitter of the additional movement control operations are probably in the same order of magnitude as the delays and jitter, introduced by processing the image. If it's okay with you, can do the following:

  1. Load a maximum travel speed and acceleration/deceleration of the values for the axis
  2. With "Load Velocity override", you can pass the speed between 0 and 100%. Transitions of value axis a velocity to the adjacent spire to the value of the acceleration that you defined before.
  3. If you need change the direction of travel, you need to use 'Load speed' and 'Motion to start. " This operation is much longer that a speed of loading a substitute value, but in general you should not call this sequence too frequently.

  I hope this helps.

  Jochen Klier

  National Instruments

• GeForce GTX 650 Ti with a t HPE-510 installation problems

  Need some comments about installing a GTX 650 Ti for a Pavilion Elite HPE-510 t.  Try swapping the GPU for the OEM GeForce 405.  I have improved the PS to a unit of 450w with 12v/20 a & have updated the BIOS to FRIEND 7.15 13/10/2011.

  When the new card is installed the PC boots never pass Gets the blue screen HP, not able to get into safe mode.  The specification for the States of 650 it's 400w & 20 minutes.

  Is it a potential conflict with the MB (Pegatron 2AB6) or not enough in the public Service?

  Thanks a lot for any suggestion or comments.

  Hello

  Assume is a bad word without knowing the particular specifications for the PNY GTX 650. I'm sure it's the 650 individual you use and not only the NVIDIA 6xx series.

  But thanks for your efforts.  It kinda confirms my suspicions.

• My judgment of mouse/keyboard after some time of work.

  Plug

  Nvidia GeForce GTX 570 GPU

  CPU: Intel Pentium G630 2.70 ghz

  (only the specs I could find so I apologize for the bit of info)

  Right then, there are four ports on the back of my PC and the other on the front of the case. What happens is I'm going to be a game or browsing internet and maybe, every 4 hours, ish, is connected to the rear, will stop working. Completely. If its my mouse, the cursor disappears and the mouse does not work. If it is the keyboard, the same thing. will not work. If I unplug whatevers does not and plug it into the front, it works very well. I do not understand why this happening not unfortunately know a fix that's why I come to the community of MS for help on how to resolve this issue, if questions are needed please comment them down below.

  Thank you!

  Hello

  Thank you for the update on this issue.

  1. are there that a failed update of Windows which is on display at the title of the history of Windows Update?

  Note: For the KB updates of failure numbers, follow the underlying steps:

  1. Press Windows + C, click on the search option.

  2. In the search box, type Update, and then in the list of results, click Windows Update.

  3. In the left pane, click view update history.

  Alternatively, you can try the following steps:

  Please try reinstalling the Chipset Driver from the computer manufacturer's website. If the problem persists, please reinstall the USB controllers:

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. press Windows + R, type Device Manager and then click on ok.

  2. expand Bus USB controllers. Right click on a device, and then click Uninstall.

  3. Once complete, restart your computer. Your USB controllers will automatically install.

  Note: Be sure to keep PS2 Keyboard or mouse, just in case of USB controllers installs automatically.

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.