Preparing to synchronize

Similar Questions

• Unable to sync iPhoto on Mac, iPhone, or iPad

  I've been Sync photos from my MacBook Pro to my iPhone and iPad for several years without many problems, but since getting a new iPhone (model 6, currently running IOS 9.2) and upgrade an older iPad to IOS 9.2 also, sync does not work.  The MacBook is a 15-inch, mid-2012, 2.3 GHz Intel Core i7, running OS 10.10.5.  It has over 500GB capacity of the hot spare.  The iPhone has 48GB of available, and the iPhoto library, I am trying to sync used to mount on my old iPhone 3 g 16 GB.  I am running iTunes 12.3.2.35.  Preparation for synchronization pass by as it was, and I always sync "Selected pictures".  I don't use the Photos on a Mac app and I will not sync via iCloud (the iPhoto library is 68 GB).  I always sync through the method of attachment (USB - 30pin / lightning connector).

  The process arrives at "Step 4 of 5" and says "Import photos", then nothing else happens.  There is no error message.  I left during the night once and still nothing happens.  Does anyone have any suggestions what to try?  Of course I tried stop, restart etc etc.

  

  First of all, I want to thank you for the thoroughness you used to describe your problem.

  You have chosen to select albums to synchronize by using the qualifier "last 12 months".  Can you assure us that at least an album corresponds to this category?

• Mouse & keyboard does not not after waking from sleep

  This problem started about 6 weeks ago, and I've exhausted all remedies except that maybe a Win update caused the problem with updates of November.  It only would be not the first time a Win update caused a problem.

  I am running Win 7 Professional 64 bit, 3.4 processor concert image, 16 gig RAM and 24 concert page file.  This occurs only when everyone is connected and puts the computer in "sleep mode" all connected, and that includes letting go the computer in mode 'sleep' a timed framework, or by using the command Win to sleep or Sleep.com.  It does not occur when you cold start, warm boot, or log off and then put the computer in standby mode, and that includes using the key on the keyboard, programmed to the Sleep.com or Win command.  In these cases, everything works fine even wake up the computer when it is disconnected.

  If I put the computer in mode 'sleep' while connected and then when I press a key or move the mouse, the computer will wake up and I get the login screen since I'm protected by Word.  The lights on the keyboard light (wired 4000 natural ergonomic keyboard) and the light on the background lights of the mouse (Wireless Mobile Mouse 4000) so I know the two USB ports are powered.  However, when you press any of the keyboard to type in my password, it does not display what I typed and the mouse cursor does not move. Both are totally insensitive.

  Short reboot, the only is to unplug the USB cable from the keyboard as well and the mouse receiver, wait 10 seconds, then reinsert them.  When I do that, everything works as it should.  It is a pain in the back since both are on the back of the computer.

  I tried using different USB ports, mouse & keyboard Centre of the reinstalled several times, checked all drivers, run ' sfc.exe/scannow"which doesn't show any problems with the system files and Device Manager has assured times checked to allow them to turn on the computer and made sure any setting relevant to the USB ports or peripheral interface that have the option to"Allow the computer to turn off this device to save power"are disabled.

  This is of course only related to someone to be connected, because it works very well when that I disconnect.  This tells me that's not the BIOS, as suggested by older discussions.  If it was the BIOS, then there is a problem when you do a cold or warm boot.  Also, I have the BIOS configured to recognize all USB devices when starting and not only ports keyboard or mouse.  The reason for this setting must be my hard drive to backup (USB 3.0) available at startup.  I checked everything I can think in the registry and can't find anything that could cause this.  I have hibernate off (never use it and it uses 10 GB of disk space for the file), and the implementation of the options for "USB selective suspend setting" is set to off.

  My solution is as follows: I disconnect, and then put the computer on "standby".  When ready again, I have simply to move the mouse, type my password, and Windows opens with the mouse and the keyboard works as it should.  It takes a little longer to wake the computer if it was put in mode 'sleep' when you are connected with the exception of the time and the hassle of having to unplug the mouse & keyboard, but I don't have to jump through that hoop to make it work.  Up to 6 weeks ago that this computer was fine with the same exact material because there now.  In the night, I just put it in "sleep" mode when connected from the computer has a task in Task Scheduler that wakes up the computer by running the insomnia (to keep him awake for backup) and backup programs runs, then shuts down the computer when finished.  This works because I do not use the keyboard or the mouse as I SLEEP.

  I would be grateful for any suggestions!  I'm a user for more than thirty years (even go back to the PMO for those of you who know what it was), built my own computers for years, so I can handle everything that needs to be changed.  It intrigued me, and I don't have very often coming up with computers.

  PROBLEM SOLVED!

  I thank very you much for working with me and remember to do things.  Sometimes techies like us, as they say, 'can't see the forest for the trees' If you know what I mean.  It's like the authors of the software manual do sometimes in that they assume you already know the steps has a B, and they begin to step C.  Sometimes it is more obvious that we see because we are looking for something more complicated.

  I had already tried another keyboard and a mouse, and I thought some time ago, I did a clean boot, because I know that can open the door and where is the problem.  If I did, I forgot or did not find the problem.

  I apologize for him accusing Microsoft of having caused the problem with an update, but I've had this happen before and thought that it had happened again.  It turns out that it was a software problem, but not here where I thought it was.

  After doing a clean boot and noting that the computer and the mouse worked after the return of the mode 'sleep' with a clean boot, I knew there must be something to load into memory and showing in the notification area.  The only things I had done in the six weeks was to add a quick Weather Channel.com Weather app and I had exchanged and received my new SkyCaddie.  It is a portable device that shows the yardage, etc. on the golf course.  The SkyCaddie uses a program called CaddieSync Express that allows the device to communicate with the web site to download updates of the course, the software updates, etc. scores.  The version of the program used on my old unit had a problem after I unplugged in that when you open Internet Explore nothing would show - no communication with the web.  I had to sign out and then sign back in and then fix it every time.  It seems that in this new version the problem has been resolved, but they have created a new.

  By default, the program loads into memory and the icon appears in the notification area.  When you connect the SkyCaddie using its USB cable, the program recognizes and prepares to synchronize.  The problem with this new version, is that even if you do not use the synchronization program, this is what prevents the keyboard and the mouse works correctly.  It must focus on a USB hub even if you do not use.  The solution was to go to the configuration of the system to prevent this program from loading at startup, it placing a shortcut on the desktop and then clicking this shortcut to load the program prior to attaching the SGX.  I then let him do his thing, and when it's over and I disconnect the SkyCaddie from the USB port, I close the CaddieSync Express icon. and then when I put the computer to sleep and then wake it up, the keyboard and mouse work fine.

  I knew that I had installed the new CaddieSync Express all the time, this problem started, but I never thought about it because he had never caused this problem before the cause of the problem.  Trust me, they will receive a call from me tomorrow so that I can tell them that the problem they cause.  Remember what I said in the first paragraph.  They would not yet be aware of the problem, and maybe after I speak with people of their software, they'll send an email informing the owners of this problem until they get it fixed.

  Now, since systems vary so much, including how are managed USB hubs, this can occur only in rare cases.  I came just to be one of these.

  Thanks again!  Perhaps some of these other people who have posted in the forum who had the question keyboard & mouse will read this thread and it will help them solve their problem.

• BlackBerry Smartphones new Version of the Software Desktop 7 hangs at "Preparing overview of synchronization.

  The PC Version, updated the message of solicitation of this morning, is now above message, therefore cannot sync.

  Uninstalled and tried to find the Version 6.0 on site - clicked on earlier versions, but only to take them to the new version.

  Help!

  Just version 6 download Softonic and I'm back where I was before the 'upgrade '!  Don't forget to uninstall version 7 first and also be careful when you browse download Softonic - they provide 2 "extensions" that I chose NOT to.  Good luck!

  http://BlackBerry-Desktop-software.en.softonic.com/BlackBerry/download

• 'Manage account' page for SYNC has no controls other than change password, delete the account & disconnection? !!! How does one choose to synchronize the information on Safari?

  I am very impressed with this mozilla support. For one I got this detail section filled completely and communication it was not accepted when I pressed the button question post...! Half an hour to write these to the top... GO?

  Anyway to be more concise: I see the synchronization preferences page. I chose the stuff on the left side, and my computer is already pre-registered on the bottom.

  Other than that how does one choose what to synchronize with (in my case, Safari also can a sync for firefox 'cloud' there to prepare for a clean reinstall? And where would progress & achievement shown?

  Sync does not support cross-browser. I have working installation of Firefox Firefox installation only, with the synchronization server in the middle.

  The use of the term 'cloud' could be misleading; the data are encrypted and are decrypted in Firefox to be usable. Without the correct hidden 'key' [created from the password] data can not be decrypted and Sync does not connect to attempt to recover the data of the user.

  Not recommended to use Sync as a backup media for a clean reinstall of the OS. Some users have done the job, while many others have involuntarily lost their data because of stupid mistakes, they did, and wrong to understand how works the synchronization service.

  See this support article for how to back up and restore data in Firefox, which in your profile folder.
  https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

• Download iPhoto to iCloud: when it starts loading and synchronization

  I decided my iCloud 200 GB of storage on the rise so I could back up my iPhoto (65 GB) library on iCloud for safety and, secondarily, sharing to my other devices. I upgraded iCloud and then clicked on the preferences to save my iPhoto library to iCloud. Nothing has changed at the moment and I was wondering if I should do something else to get the download/synchronization began. Any advice on when it will start or if I should take further measures. Thank you very much for all the advice.

  Skip

  You should not need to do anything extra. Check if, by chance, the download is suspended. Photos > Preferences > iCloud > Pause button someday. If this is the case, you can resume at any time.

  The download takes a long time. With a large library, it could be a week or more. Even the initial preparation takes many hours.

  Give him time and leave your computer turned on and connected to the Internet during the night.

  

• I replaced the synchronization of the data on the server, how do I access an older version of sync my data?

  Hello!

  I have a problem. I have synced my desktop browser data and then reinstall the browser. After I pressed Sync now entered my credentials and I thought that this browser will download my data. But this acts, I replaced my previous data. How can I restore it?

  Hello Mightymad,

  Please contact the Mozilla Support. Sorry about your data loss.

  Sync is not intended to be a service of "backup" while the user re - install their operating system. It was made to synchronize the data between the installations of Firefox on multiple devices, where not all devices are devoid of their data and installation of Firefox at the same time.

  Unfortunately, if you have replaced the synchronization of your previous data is lost.

  I wish we had better news for you, but I hope that gives you a better idea of how Sync works, then you're better prepared the next time you want to reinstall.

  Patrick

• Whenever I add several or even just a trac to my iphone, it takes several minutes 'PREPARATION OF the UPDATE.

  Hello world...
  Whenever I add several [or one] track from my iTunes to my iPhone library, there are several minuets 'PREPARE to UPDATE' and then he goes to copy the tracks I wanted with 900 or so titles and several videos I did not update..., can someone explain why this is happening?
  I think I have all the auto update features are disabled, and I do not use the cloud or new music thingy.

  Thank you!

  Fredy

  The following steps should solve the problems around the synchronization, assuming that all the content you want in your library.

  (If it isn't see recover your iTunes from your iPod or an iOS device)

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  NB. A feature introduced with iOS 9 called thinning or slicing app app allows each device to download just the code and resources required by this device, resulting in smaller downloads and a better use of the storage on the device. Therefore the device is no longer the universal version of the application that can be installed on any device to transfer applications is no longer supported. I hope that Apple will bring some changes to how it works, but in the meantime, you can download past purchases from iTunes or activate the automatic shopping app downloads to ensure that iTunes has always the apps you want on your device. As long as you make sure that all of the apps are present and updates in iTunes before you attempt a restore there should be no loss of data. I cannot confirm, but it seems a way to recent update all data are restored and apps that are not in the library are waiting to download from the iTunes Store over Wi - Fi, in a similar way to the restoration of the iCloud way works.

  TT2

• Synchronization of analog and digital output with the external sample clock

  Hello

  First of all sorry for my English, I will try to explain what I want to do.

  I want my PCIe-6321 to send two custom signals (modification sawtooths) on a mirror controller. I would also like to generate output with my card at the beginning of each tooth of saw. Everything must be synchronized with an external k-clock signal of 100 kHz. The idea is that whenever the PCI receives a trigger to external clock, it sends two analog output voltages and when he received 1024 clock ticks it will also send a pic of triggering TTL. What I do is first prepare the map and after that in a loop sending and modifing the output values of the two signals and at the same time send a digital signal Boolean in each arch, so when's done it 1024 iterations of the loop I send an event to the digital port. Attached you can see.

  The problem is that I don't know how to synchronize both. Can I use the sample clock just to the analog output? I can use sample for the two outputs clock, or do I need to use the output of the meter? If don't know how to use it here.

  If I do nothing else bad/wrong, I would be grateful for feedback.

  Thanks in advance,
  Pablo

  I don't know how but I find the solution. I'm generating more than a positive value (as I was triggered maybe very fast the oscilloscope has been absent there). If I put the sample clock of digital output to use the sampling/ao/Dev1 clock that it doesn't, but if I put to use the same source as the OD (terminal where my external clock is connected), but the trigger to start the DO to be Dev1/ao/StartTrigger this works. I don't really know why, but it does.

  Thank you for your patience and your help. I put here the final code.

• HAVE multiple AO-synchronization-2 multiple while loops

  Hi all

  I want to characterize my RF circuit by using an additional narcotics control and map PXI-6229. I wrote a simple VI in Labview, which is almost similar to the example, multiple-HAVE-AO-synchronization, seen in LABVIEW. According to my VI, 4 analog outputs with different offsets dc, amplitudes and phase values must be generated to my RF circuit and 2 analog inputs must be acquired by this circuit simultaneously and continuously. But the problem with my VI is that I try to observe two diagrams at the same time to see the changes in signals generated and acquired. However, I don't see the two signals simultaneously. The second while loop, which belongs to the acquisition of analog signals, does not start while the first loop generates analog signals continuously. How can I synchronize these two while loops in order to observe the two parties in the diagrams?

  I have attached my VI.

  Thanks in advance.

  T. Eray

  Hi Eray,

  I will be brief and I'll keep it simple. If I understand correctly, you have trouble with the data stream in LabVIEW. When you work in LabVIEW, you must understand the order in which the blocks (functions/nodes/structers) are run in LabVIEW - stream. Each block can be executed just at the moment where there values on each entry. This means that if the 2 blocks are connected with a wire, the 2nd block waits until the first ends its execution.

  In your case, that means, this 2nd loop does not execute before the first loop (with the DAQ Assistant) ends its execution, because the son comes from the inside of the first loop, then they go to some DAQmx features and then DAQmx features they go to the 2nd loop.

  In principle, what you could do is to put the content of the first loop, where you prepare the signal generated in the 2nd loop. Good course without the DAQ Assistant. Instead, you can use DAQmx writing in the 2nd loop.

  Kind regards

  Martin

• Delivery failure in the form of synchronization?

  Do not use wifi sync that my network is hidden and does none of the confure this kind of wifi access, I can say. I had no problem with wired syncing through my mac, but today I can't synchronize my race. On the device, he says prepares fitness data, then the sync report told that he failed. The dialogue on the computer crashes just indefinitely and that when I hit the x here button to cancel the synchronization (after a delay of 10-20 minutes - long after the device shows the exclamation point for synchronization of failure of fitness) desktop software announced that the synchronization failed.

  Help!

  90% of my fitness synchronizations fail, wired or wireless. I have to power cycle before synchronization in order to work. Not a great situation, but at least it works.

• How can I synchronize time between two computers?

  If I have computers connected via a LAN, how can I get to synchronize their time of a computer authoritative? I do not fear that they have the true, but just time that they have the same time. I looked at this page here configure various things in regedit so that one is prepared to act as a time server authoritative:

  http://support.Microsoft.com/kb/314054
  However, I'm not sure how to actually do other computers process as their source. As I know if you mention the date and time properties in windows, there is a section to automatically synchronize with an internet time server. This is where I would specify computers do not have authority to read the authoritative? And what I would put the server? My first thought was the IP address, but when I try that it just gives an error after trying for a little while.
  I do that with windows XP computers, although the layout setting date/time in windows 7 is basically the same.
  Any help would be appreciated.

  It is an interesting question.

  Of course, if your LAN is connected to the Internet, the obvious solution is to synchronize two computers at the same time source Internet, such as time.windows.com and time.nist.gov (see http://tf.nist.gov/tf-cgi/servers.cgi).

  The time real internal clocks (RTC) in most computers don't are not particularly accurate, but if you want to do is have two computers Sync to the same clock, put all these settings from registry return to their default values and see the response from Hans-Georg Michna here--> http://www.pcreview.co.uk/forums/sync-time-among-pcs-lan-ntp-t244334.html

  The "windowsservername" corresponds to the "display name" of the computer. Do right click my computer, select properties and select the "Computer name" tab

  If the computer name is not recognized, it is probably because the NetBIOS name resolution is not enabled.  To test, open a windows command prompt (start > run > cmd > OK) and type

  ping ComputerName {press Enter}

  Note that you do not use the two slashes back in the ping command.  For example, if the computers named Alice, Bob and Carol are on the local network, on computer, Alice, you would type

  Bob ping {press Enter}

  But if you try to synchronize the time on Alice using Bob as the time source, you could type

  NET time \\Bob/set

  To test the command net time, run it without parameters selected.  For example:

  NET time \\Bob

  You should get the following output (following comes from Windows 7, but it should be basically the same for XP):

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\LemP>net time \\Bob
  Is currently at \\Bob 07/10/2013 14:30:30

  The command completed successfully.

  To enable the NetBIOS name resolution:

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right-click on the icon for your network adapter, and then select Properties
  • Select "Internet (TCP/IP Protocol" and click on the button 'properties '.
  • Click on the button "Advanced".
  • Select the WINS tab
  • Select the medium radio button to "Enable NetBIOS over TCP/IP"
  • OK your way out

• Synchronization of calendar blackBerry Smartphones from outlook to Pearl

  used to synchronize my outlook (wired) calendar to my Pearl.  synchronization of contacts is very well.

  I had this problem once before;

  where in your handheld can change you the setting for the calendar?

  or other solutions, thank you,

  If you encounter errors in your calendar on your BlackBerry and you want to delete the entire database of calendar on your BlackBerry, follow the instructions below. Make sure that you have a good copy of your calendar or Contacts, because this procedure will delete all entries in calendar on your BlackBerry.

  1. open the Desktop Manager on your PC.

  2. open Backup/Restore > advanced.

  3. in Advanced Options, you will see a split pane screen. The left pane, it is what will be saved from your device, and the right is a list of the existing databases.

  3. highlight on the side right your Calendar database, and then click the arrow in the Middle pointing to the left. This will copy the information on and prepare it for the backup.

  4. once the backup is complete, click on the Clear button down to wipe and clean all the basis of the calendar.

  5. once it is finished, it will ask if you want to save the backup that you created, say you Yes and check the device to ensure that the calendar has been duly authorized to come out. Now, Resync the necessary contact details and you should be set to go.

• adoption phase = prepare failed

  Hi all

  EBS R12.2.4

  11 GR 2

  OL6.5

  I'm running adoption phase = prepare but I got error

  Please help how to solve problems.

  Thank you

  JC

  $ adop-status

  Enter the password for APPS:

  Current patch ID of Session: 7

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  fitr12 master PREPARE failed February 3-16 15:12:58 + 08:00 February 3-16 15:16:09 + 08:00 0:03:11

  APPLY NOT STARTED

  FINALIZE NOT STARTED

  COMMISSIONING IS NOT STARTED

  CLEANING NOT STARTED

  Folder synchronization system used in this Patching Cycle: light

  $ adopscanlog-latest = yes

  Directory/scanning/u02/TEMP/appcrp/CRP/fs_ne/EBSapps/log/adoption/7...

  /U02/temp/appcrp/CRP/fs_ne/EBSapps/log/adop/7/adop_20160203_151059.log:

  -----------------------------------------------------------------------

  #(166-170) lines:

  [EVENT]     The call: /u01/appcrp/CRP/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl

  [STATEMENT] Output directory: / u01/appcrp/CRP/fs_ne/EBSapps/log/adoption/7/prepare_20160203_151059/CRP_fitr12

  [UNEXPECTED] Erreur s'est produite lors de l'exécution « perl /u01/appcrp/CRP/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl-contextfile=/u01/appcrp/CRP/fs1/inst/apps/CRP_fitr12/appl/admin/CRP_fitr12.xml-patchcontextfile=/u01/appcrp/CRP/fs2/inst/apps/CRP_fitr12/appl/admin/CRP_fitr12.xml - promptmsg = cacher - console = off - patchtop = / u01/appcrp/CRP/fs_ne/EBSapps/patch - mode = mise à jour - sessionid = 7 - timestamp = 20160203_151059 - workercount = 4 - outdir = / u01/appcrp/CRP/fs_ne/EBSapps/journal/adop/7/prepare_20160203_151059/CRP_ fitr12 - autoskip = no ".

  [UNEXPECTED] Error then that subroutine runSyncFS called

  [PROCEDURE] [EARLY 2016/02/03 15:15:57] Check and stop Patch Server Admin

  #(167-171) lines:

  [STATEMENT] Output directory: / u01/appcrp/CRP/fs_ne/EBSapps/log/adoption/7/prepare_20160203_151059/CRP_fitr12

  [UNEXPECTED] Erreur s'est produite lors de l'exécution « perl /u01/appcrp/CRP/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl-contextfile=/u01/appcrp/CRP/fs1/inst/apps/CRP_fitr12/appl/admin/CRP_fitr12.xml-patchcontextfile=/u01/appcrp/CRP/fs2/inst/apps/CRP_fitr12/appl/admin/CRP_fitr12.xml - promptmsg = cacher - console = off - patchtop = / u01/appcrp/CRP/fs_ne/EBSapps/patch - mode = mise à jour - sessionid = 7 - timestamp = 20160203_151059 - workercount = 4 - outdir = / u01/appcrp/CRP/fs_ne/EBSapps/journal/adop/7/prepare_20160203_151059/CRP_ fitr12 - autoskip = no ".

  [UNEXPECTED] Error then that subroutine runSyncFS called

  [PROCEDURE] [EARLY 2016/02/03 15:15:57] Check and stop Patch Server Admin

  [EVENT]     [EARLY 2016/02/03 15:15:58] Check and stop Patch FS Server Admin

  #(177-181) lines:

  [STATEMENT] Skip the check and Stop Patch Node Manager step.

  [PROCEDURE] [END 2016/02/03 15:16:09] Check and stop the Patch Node Manager

  [ERROR]     Prepare phase completed with errors or warnings. Check the log files.

  [STATEMENT] SQL statement: "update ad_adop_sessions".

  set status = 'F'

  /U02/temp/appcrp/CRP/fs_ne/EBSapps/log/adop/7/prepare_20160203_151059/CRP_fitr12/TXK_SYNC_update_Wed_Feb_3_15_15_38_2016/txkADOPPreparePhaseSynchronize_Wed_Feb_3_15_15_38_2016.log:

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  #(316-318) lines:

  TIME: Kills Feb 3 15:15:57 2016

  FUNCTION: main::validatePatchLocation [level 1]

  ERRORMSG: / u01/appcrp/CRP/fs_ne/EBSapps/patch/18955265 directory does not exist.

  I mean to the point where you have cloned the source environment.

  When clone you your source environment, which is your level of apps, / U01/U02.

  Why you have 2 level apps mount points.

  According to my understanding, this leads to confusion.

  Kind regards

  Hugues

• ADOPTION PHASE prepare crashes at txkADOPPreparePhaseSynchronize.pl

  Hi all

  EBS 12.2.4 and make ADOPTION prepare phase and it crashes right here. I don't see any errors on the CLONE newspapers.

  ************

  Start of session *.
  version: 12.2.0
  begins: Friday, June 12, 2015 21:37:40

  APPL_TOP is set to/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl
  [STATEMENT] [EARLY 2015/06/12 21:37:40] Determine the admin node
  [STATEMENT] [END 2015/06/12 21:37:42] Determine the admin node
  [STATEMENT] [EARLY 2015/06/12 21:37:44] Acquisition of a lock on the sessions table
  [STATEMENT] [END 2015/06/12 21:37:45] Acquisition of a lock on the sessions table
  [STATEMENT] [EARLY 2015/06/12 21:37:45] Check that the waiting for sessions
  [STATEMENT] [EARLY 2015/06/12 21:37:48] Staging of the current session
  [STATEMENT] [EARLY 2015/06/12 21:37:52] Check if the node 'ebswl' is abandoned
  [STATEMENT] [END 2015/06/12 21:37:54] Check if the node 'ebswl' is abandoned
  [STATEMENT] [END 2015/06/12 21:37:55] Staging of the current session
  [STATEMENT] [EARLY 2015/06/12 21:37:58] Unlock sessions table
  [STATEMENT] [END 2015/06/12 21:37:59] Unlock sessions table
  [STATEMENT] [EARLY 2015/06/12 21:37:59] adzdoptl.pl run
  [STATEMENT] Session ID: 16
  [STATEMENT] Phase: prepare
  [STATEMENT] Log file: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/adop_20150612_213726.log
  [STATEMENT] [EARLY 2015/06/12 21:38:06] prepare phase
  [STATEMENT] PREPARE Phase START TIME: 06/12/2015-21:38:07
  [STATEMENT] [EARLY 2015/06/12 21:38:12] Configuration validation
  [STATEMENT] The call: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSanityCheck.pl
  [STATEMENT] Output directory: / data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adoption/16/prepare_20150612_213726/PROD_ebswl

  Program: launched @ Fri Jun 12 21:38:15 2015

  Log File = /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/TXK_SANITY_filesystemcheck_Fri_Jun_12_21_38_15_2015/txkADOPPreparePhaseSanityCheck_Fri_Jun_12_21_38_15_2015.log

  
  Program: complete @ Fri Jun 12 21:38:16 2015

  [STATEMENT] [END 2015/06/12 21:38:16] Configuration validation
  [STATEMENT] [EARLY 2015/06/12 21:38:17] Detect FS config changes
  [STATEMENT] [EARLY 2015/06/12 21:38:18] The execution of adConfigChangeDetector on ebswl
  [STATEMENT] The call: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/adConfigChangeDetector.pl
  [STATEMENT] Output directory: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adConfigChanges.log
  The log file is /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adConfigChanges.log

  / Data/nfs_share/D01/Oracle/prod/FS1/inst/Apps/PROD_ebswl/Appl/admin/cutover directory not found, so configuration changes cannot be detected.
  The folder may have been deleted intentionally or accidentally. Or, if it comes to the first cycle of the adoption, the directory will be created only after failover.

  Without this directory, configuration changes will be propagated in the filesystem patch with force.

  Detected configuration change.
  [STATEMENT] [END 2015/06/12 21:38:23] The execution of adConfigChangeDetector on ebswl
  [STATEMENT] Config changes detected in ebswl
  [STATEMENT] [EARLY 2015/06/12 21:38:24] Insert the Config clone online tracking for the NŒUD: ebswl
  [STATEMENT] [END 2015/06/12 21:38:29] Insert the Config clone online tracking for the NŒUD: ebswl
  [STATEMENT] [END 2015/06/12 21:38:30] Detect FS config changes
  [STATEMENT] [EARLY 2015/06/12 21:38:31] Check to see if, in anticipation of cleaning measures exist
  [STATEMENT] Check if pending clean-up
  [STATEMENT] [EARLY 2015/06/12 21:38:34] The cleaning steps
  [STATEMENT] Cleaning call because the cleaning has not been accrued in the previous session of patching.
  [STATEMENT] [EARLY 2015/06/12 21:38:36] Cleaning steps
  [STATEMENT] [EARLY 2015/06/12 21:38:38] Break-in DDLS CLEANING table manager ddl
  [STATEMENT] [Early 2015/06/12 21:38:39] ADOP::DefaultsFileUtil:substituteDefaultsFileTokensForPatchApplTop
  [STATEMENT] Default values for reading file /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/admin/PROD/adalldefaults.txt
  [STATEMENT] Substitution of chips...
  [STATEMENT] Regenerate default file...
  [STATEMENT] [End 2015/06/12 21:38:39] ADOP::DefaultsFileUtil:substituteDefaultsFileTokensForPatchApplTop
  [STATEMENT] Calling: adpatch options = /hotpatch, interactive nocompiledb = no console only = no workers = reboot 24 = no abandonment = Yes defaultsfile=/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/admin/PROD/adalldefaults.txt patchtop=/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/driver logfile = cleanup.log driver = ucleanup.drv
  [STATEMENT] ADPATCH logs directory: / data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adoption/16/prepare_20150612_213726/PROD_ebswl/log
  [STATEMENT] Race: options adpatch /hotpatch, interactive nocompiledb = no = no console only = no workers = reboot 24 = no abandonment = Yes defaultsfile=/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/admin/PROD/adalldefaults.txt patchtop=/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/driver logfile = cleanup.log driver = ucleanup.drv stdin = yes

  Managed to create directory
  [STATEMENT] [END 2015/06/12 21:39:01] Break-in DDLS CLEANING table manager ddl
  [STATEMENT] [EARLY 2015/06/12 21:39:02] Report generation to view all DDL to ad_zd_ddl_handler
  [STATEMENT] Report: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/sql/ADZDALLDDLS.sql

  [STATEMENT] Output: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adzdallddls.out

  [STATEMENT] [END 2015/06/12 21:39:05] Report generation to view all DDL to ad_zd_ddl_handler
  [STATEMENT] Cleaning of the call in STANDARD mode
  [STATEMENT] [WARNING] Cleaning may take some time. Please wait.
  [STATEMENT] [END 2015/06/12 21:39:09] Cleaning steps
  [STATEMENT] [EARLY 2015/06/12 21:39:10] Report is generated to display the status of cleaning
  [STATEMENT] Report: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/sql/ADZDCLEANUPRP.sql

  [STATEMENT] Output: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adzdcleanuprp.out

  [STATEMENT] [END 2015/06/12 21:39:46] Report is generated to display the status of cleaning
  [STATEMENT] [END 2015/06/12 21:39:50] The cleaning steps
  [STATEMENT] No. pending the actions of cleaning, proceed with other steps
  [STATEMENT] [END 2015/06/12 21:39:52] Check to see if, in anticipation of cleaning measures exist
  [STATEMENT] [EARLY 2015/06/12 21:39:53] Delete rows in the ad_patches_tables table
  [STATEMENT] [END 2015/06/12 21:39:55] Delete rows in the ad_patches_tables table
  [STATEMENT] [EARLY 2015/06/12 21:39:56] Performing DB sanity checks
  [STATEMENT] [EARLY 2015/06/12 21:39:56] Check if there are users of the edition enabled
  [STATEMENT] [END 2015/06/12 21:39:58] Check if there are users of the edition enabled
  [STATEMENT] [EARLY 2015/06/12 21:39:59] Perform a check of the existence of service patch
  [STATEMENT] [END 2015/06/12 21:40:01] Perform a check of the existence of service patch
  [STATEMENT] [EARLY 2015/06/12 21:40:02] Check for clearance and the existence of the Logon trigger
  [STATEMENT] [END 2015/06/12 21:40:04] Check for clearance and the existence of the Logon trigger
  [STATEMENT] [END 2015/06/12 21:40:05] Performing DB sanity checks
  [STATEMENT] [EARLY 2015/06/12 21:40:05] Tablespace report generation
  [STATEMENT] [EARLY 2015/06/12 21:40:07] Report is generated to display the status of the large storage spaces. (ie. the free space)
  [STATEMENT] Report: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/sql/ADZDSHOWTS.sql

  [STATEMENT] Output: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adzdshowts.out

  [STATEMENT] [END 2015/06/12 21:40:10] Report is generated to display the status of the large storage spaces. (ie. the free space)
  [STATEMENT] [END 2015/06/12 21:40:10] Tablespace report generation
  [STATEMENT] [EARLY 2015/06/12 21:40:11] Run the competitor program ADZDPATCH
  [STATEMENT] [EARLY 2015/06/12 21:40:15] Check the status of the competitor program ADZDPATCH
  [STATEMENT] Status of ADZDPATCH:
  [STATEMENT] The next available simultaneous Manager will process this request.  This
  request will process as soon as the concurrent Manager ended his
  current processing and the processing of other applications to this
  request. The SYSADMIN user submitted this request on June 12, 2015 21:40:14.  NO.
  measures to be taken. It is a normal condition. You can speed up the beginning of
  the processing of this application by reducing its priority value. Only the
  Responsibility of the system administrator can update the values of priority of application.
  [STATEMENT] [END 2015/06/12 21:40:19] Check the status of the competitor program ADZDPATCH
  [STATEMENT] The concurrent application number: 474176
  [STATEMENT] [END 2015/06/12 21:40:51] Run the competitor program ADZDPATCH
  [STATEMENT] [EARLY 2015/06/12 21:40:52] Report generation to view all DDL to ad_zd_ddl_handler
  [STATEMENT] Report: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/sql/ADZDALLDDLS.sql

  [STATEMENT] Output: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adzdallddls.out

  [STATEMENT] [END 2015/06/12 21:40:56] Report generation to view all DDL to ad_zd_ddl_handler
  [STATEMENT] [EARLY 2015/06/12 21:40:56] Check and create Patch (if necessary) edition
  [STATEMENT] [EARLY 2015/06/12 21:40:57] Check if the edition Patch already exists
  [STATEMENT] There is no Edition of patch
  [STATEMENT] [EARLY 2015/06/12 21:41] Edition of Patch creation
  [STATEMENT] [END 2015/06/12 21:41:17] Edition of Patch creation
  [STATEMENT] [END 2015/06/12 21:41:18] Check if the edition Patch already exists
  [STATEMENT] [END 2015/06/12 21:41:18] Check and create Patch (if necessary) edition
  [STATEMENT] [EARLY 2015/06/12 21:41:19] The steps to synchronize data FS
  [STATEMENT] [EARLY 2015/06/12 21:41:20] Steps to CLONE FS to EXECUTE it and PATCH appltops
  [STATEMENT] [END 2015/06/12 21:41:25] Steps to CLONE FS to EXECUTE it and PATCH appltops
  [STATEMENT] [EARLY 2015/06/12 21:41:26] The steps for syncup FS of RUN and PATCH appltops
  [STATEMENT] [EARLY 2015/06/12 21:41:28] Sync FS RUN and PATCH
  [STATEMENT] The call: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl
  [STATEMENT] Output directory: / data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adoption/16/prepare_20150612_213726/PROD_ebswl

  Program: launched @ Fri Jun 12 21:41:30 2015

  Logfile = /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/TXK_SYNC_update_Fri_Jun_12_21_41_30_2015/txkADOPPreparePhaseSynchronize_Fri_Jun_12_21_41_30_2015.log

  cmd = / data/nfs_share/d01/oracle/PROD/fs1/EBSapps/comn/util/jdk32/jre/bin/java - classpath /data/nfs_share/d01/oracle/PROD/fs1/FMW_Home/Oracle_EBS-app1/shared-libs/ebs-appsborg/WEB-INF/lib/ebsAppsborgManifest.jar:/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/comn/java/classes-mx256m oracle.apps.ad.tools.configuration.ADOPCustomSyncUp - contextFile /data/nfs_share/d01/oracle/PROD/fs1/inst/apps/PROD_ebswl/appl/admin/PROD_ebswl.xml - custSyncDrv /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/appl/ad/custom/adop_sync.drv - logFile/data/nfs_share / D01 /. Oracle/prod/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/TXK_SYNC_update_Fri_Jun_12_21_41_30_2015/txkADOPCustomSyncUp.log - promptmsg 'hide '.
  ADOPTION Custom Synchorization executed successfully

  Program: complete @ Fri Jun 12 21:41:49 2015

  [STATEMENT] [END 2015/06/12 21:41:49] Sync FS RUN and PATCH
  [STATEMENT] [END 2015/06/12 21:41:50] The steps for syncup FS of RUN and PATCH appltops
  [STATEMENT] [EARLY 2015/06/12 21:41:51] Steps for CONFIG_CLONE FS to EXECUTE it and PATCH appltops
  [STATEMENT] There is a clone session waiting for the file system/data/nfs_share/d01/oracle/PROD/fs2
  [STATEMENT] [EARLY 2015/06/12 21:41:56] FS CONFIG_CLONE following steps
  [STATEMENT] [EARLY 2015/06/12 21:41:57] CONFIG_CLONE PATCH FS with RUN FS
  [STATEMENT] The call: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl
  [STATEMENT] Output directory: / data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adoption/16/prepare_20150612_213726/PROD_ebswl

  Program: launched @ Fri Jun 12 21:42 2015

  Logfile = /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/TXK_SYNC_migrate_Fri_Jun_12_21_42_00_2015/txkADOPPreparePhaseSynchronize_Fri_Jun_12_21_42_00_2015.log

  *************

  and then the session just stays there and does not move.

  STATUS of the ADOPTION reveals:

  Current patch ID of Session: 16

  Name of node node Type Phase status started completed elapsed
  --------------- --------------- ----------- --------------- ------------------------------ ------------------------------ ------------
  ebswl master PREPARE running 12 June 15 09:38:07 - 07:00
  APPLY NOT STARTED
  COMMISSIONING IS NOT STARTED
  CLEANING NOT STARTED

  
  Folder synchronization system used in this Patching Cycle: None

  File system information:
  ========================

  ***********

  How long is it supposed to work?

  I don't see the necessary CHANGES or configs side WLS...

  Thank you
  

  I bounced the server and this has solved the problem.  Go figure... Thank you to everyon' help... very appreciated... !!