Presario CQ40: Display a ratio and incorrect resolution even after installing drivers

Similar Questions

• Satellite Pro 2100 strange colors and incorrect resolution on LCD internal

  Since a few days, I have problem with graphic in my Toshiba. External monitor works perfectly, but at the same time my laptop made of strange colors and incorrect resolution on screen LCD internal.

  This means that the graphics card is damaged? How to be sure what is the problem and what to do in such a case and not spendig a lot of money for the profesional service?

  Hello

  If the image on the external screen is seems perfect so I thing t that there could be something wrong with the graphics card.
  It might be something wrong with the screen of the laptop.
  In this case the best way is to contact the service partner allowed in your country because it can do some diagnostic tests.

  But be aware that parts like display or motherboard are the most expensive laptop parts. If you have experienced failure and if it s 100% the wrong display work so I would recommend looking for a second hand laptop with the screen on the right.

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• I need assistance with combine jpeg and raw photo even after import [was: Hello?]

  I need assistance with combine jpeg and raw photo even after importation

  You mean both JPG and RAW file after importing from a camera memory card? There is a setting in LR preferences to process the JPG images next to RAW files as separate photos. It is under the general tab of preferences. By default, this option is not checked.

  If this is not your problem, then we will need Lots and Lots and lots more information about what you mean by the combine

• Why my password for linkedin is still saved and appears automatically, even after stocks repeated to remove the entire chronology (including offline data)?

  Several passwords are still stored and automatically appears for several Internet Web sites (linkedin, expertconsult) even after repeatedly cancelled the chronology and the offline data...
  When I erase all data, I really want to erase all data

  Thank you for your help

  Saved passwords are stored in the Firefox preferences > Security > passwords saved. You will find a list of passwords registered and this Web site, they were saved for. You can display the passwords or delete at will.

• Internet Explorer and Firefox, both crash after installing update KB2670838

  After installing Win7 x 64 platform update KB2670838 (as recommended) no browser would go, V19.0 Firefox and Internet Explorer V9.0.13 (32 and 64 bit) would all the crash initially upwards.

  Other programs, I tried that internet access would go directly without problem.

  Be able run any internet browser, I had to uninstall KB2670838.

  What is the problem with browsers, internet and KB2670838?

  I solved the problem of Firefox after installing IE10 by opening Firefox in Mode safe mode and disabling hardware acceleration (how to in my previous post), have not had any problems with Firefox because I have disabled hardware acceleration.

• Lines and text, display of line and incorrect filling

  I started having this problem in the last few months. It becomes impossible to select and change the fill and stroke of multiple objects. They show a background and outline in the appearance Panel, but display another. This is particularly noticeable in the text. I need to change with the text tool to put in place the right color - hard if there are many. You can see that the type has a slight black halo around it. It's the same with vector lines - it's almost as if there are two appearances on an object, but as you can see - the appearances Panel is only show the black fill. It seems to happen randomly - I can't work a way to replicate it well it seems to happen more often in objects that are grouped or have been grouped. Sometimes separate will solve the problem.

  I hope maybe I accidentally selected / deselected the option I'm not aware of that. Everyone knows the same problem?

  I work in Illustrator CC 2015.3 on a MacBook Pro 2014.

  

  Actually, you're right! Your type has TWO appearances. A fill has been used for the selected characters. The other aspect has been applied to select items.

  If you select a bunch of objects of type at a time, your high screenshot of the page, you will see that black has been applied. But if you select the characters themselves with your Type tool, they are full of Cyan.

  What is really confusing, it's that your character color fill is before the filling of these objects of the selected type.

  If you want to select a bunch of objects of Type at a time and apply a fill color to all, follow these steps:

  1. Select the type of the tool Selection (V)
  2. In the appearance Panel, click the list of characters .
  3. In the swatches Panel, click on 'None' for the fill color
  4. In the appearance Panel, click the Type list at the top, look under the Options menu and choose new filling.
  5. Change the fill color to a Swatch color that you want in the appearance Panel

  You can also do the following:

  1. Fill a rectangle with Cyan
  2. Create a graphic Style
  3. Apply this graphic Style for all your objects of Type at a time.

• Satellite P100-286 with no display after installing drivers

  I reinstalled XP on my 286 P100, as I did a couple of times before and went about installing the XP drivers on the Toshiba site. I was installing video drivers when the screen went black. I assumed it was a regular part of the installation of the video driver, usually the screen goes black for a few seconds, but the screen remained black.

  I tried various commands on keyboard, but nothing has worked. So I restarted the laptop. Now, the display lights at all. I can't even an external monitor to show anything.

  Any advice would be appreciated.

  Hey,.

  Can you see photo when you in BIOS mode for example?

  If so, you should try to go into safe mode and remove the display driver. Maybe something was wrong due to the installation of the driver

• External hard drives and USB not detected after installing windows 7

  Original title: does not display the hard drives laptops, but do sticks

  for some reason any lately
  any laptop computer portable hard disk or 3.5-inch usb drives work, but do memory sticks
  some show in computer management, some don't
  I've updated the mb drivers
  trying to not format to fix this little problem
  ideas?

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the brand and model of the computer?

  3 have you tried plugging the laptop hard drive on different USB ports?

  I would suggest trying the following steps and check.

  Method 1:

  Run the utility of Windows troubleshooting for hardware and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Check if it helps.

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

  Method 3:

  Throw a virus with the Microsoft Safety scan scanner to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know the results.

• Presario 2175US not able to connect to the radio after installing Apple Airport Extreme router

  Hi all.  I have a Presario 2175US portable computer that is running Windows XP SP2.  The wireless adapter is a Broadcom 802. 11b / g WLAN adapter.  We have recently installed a router Apple AirPort Extreme in our House, with a network WPA2 key, and while the wireless network is visible on my laptop, when I try to connect, it tries to connect for about 90 seconds, but fails.  Unlike other laptops that we have, it does not ask me to enter the network key before trying to connect.  If anyone has a solution to this problem, I would be very grateful.  Thank you.

  Thanks for the comments, Paul.  I am pleased to say that the problem was solved after I installed the Windows XP SP3.

• I can't get my printer coupon program to print even after installing it again and again

  I have a coupon printer installed program on my computer, and it used to work very well.  Then, a month ago, I tried to use it and when I went to print it told me that I had to install the coupon printer in order to print coupons.  I installed again and it goes through the installation and then said it was successful, but when I try to print it tells me I need to install again.  Please help because this problem is ongoing for about a month maybe longer.

  Hello

  Step 1.
  I would ask you to uninstall and reinstall the printer completely and then see if you can print.

  http://support.Microsoft.com/kb/307895

  Step 2.
  After removing the printing of add or remove progr AMS software, delete the folder w32x86 from the following location.

  C:\System32\Spool\Drivers\W32x86
  Note: C is your system partition.
   
  Step 3.
  Now reinstall the drivers from the computer manufacturer's website and check.
   
  I hope this helps.

• Photoshop and Illustrator is like after installing Cintiq 13HD touch.

  Photoshop and Illustrator does not respond. I'm running Windows 10, having the latest updates and versions of Adobe CC and its application, applications worked until I installed a Cintiq 13HD touch, however, still after that I uninstalled the Tablet, applications do not open. It's not even an error message. I uninstalled the tablet apps would work again. Then I uninstalled and reinstalled, including my OS, and then only my programs adobe has worked again. I thought I would try reinstalling the Tablet and now I'm back to ground zero, nothing works. My computer is extremely powerful, so I know that's not a problem of material for me. Does anyone have any solutions for this?

  So I ended up going with the support of two levels, the question was that there are start-up programs that were interfering with the ability of programs to open it. It is there no specific program to do, just a combination of those, it's the Cintiq driver that heaved over the edge. Once all the startup programs have been disabled, issues vanished.

• Download installation stops at 42% for InDesign, Illustrator and Photoshop. Even after 5 hours, still nothing...

  I tried for a while but my installation may never end. All the updates stuck at 42%.

  The only update has been completed has been 'Scout CC', I don't even need but I tested it because I thought that it was not this heacy.

  So it worked, so everything is fine with my account/member number.

  I'm using an iMac with OS X 10.10.5

  Hello

  Please refer to the download error or update of Adobe Creative Cloud applications

  Kind regards

  Gag

• Presario cq40 144 do YOU: Presario CQ40-144 - TU Ram Upgradation

  Hello team HP,

  I use a Compaq Presario CQ40 - 144TU, Windows 7 64 bit. I want to upgrade RAM. But I don't know exactly the frequency of the ram to be updated. What is 667 Mhz or 800 Mhz?  which is more suitable for my laptop?

  Is it possible for me to upgrade to 6 GB. In the main location 4 GB and 2 GB in the secondary location.

  Thanks in advance.

  Hello

  You machine has 2 GB of RAM in two slots curently (1 GB each)- 2048 MB (1 x 2048 MB):

  http://support.HP.com/EE-en/document/c01573098

  It supports 8 GB (4 GB) total. Yes, you can switch to 6 GB. RAM are cheap now, you have to throw away two 1 GB parts - account up to 4 + 2 or 4 + 4 won't cost you much more.

  Please use manual #13 to the following list (Compaq Presario CQ40 Notebook PC - Maintenance and Service of Guide)

  http://support.HP.com/us-en/product/Compaq-Presario-CQ40-notebook-PC-series/3752105/model/3815418/manuals

  #2 shows you what RAM you need. page #54 shows you the part number and how to replace the RAM.

  Good luck.

• Illustrator CC 2014 open and place orders does not not after installing Yosemite

  How can I get orders open Illustrator and Place to work after installing Yosemite?

  d mar,

  I think that the good order/way is to update the operating system, and then reinstall the applications. Which was how you did it?

  Otherwise, it may be time to try a reinstall.