Presario cq60-224nr does not start, cannot recover

Similar Questions

• Satellite A305D-S6848 does not start - cannot load Windows

  The DISPLAY SHOWS "Windows failed to load because a required file is missing or corrupt... »
  file: ntoskrnl.exe
  status: 0xc0000098

  I DON'T HAVE AN INSTALLATION DISC, AND DON'T KNOW HOW TO GET SYSTEM OPERATIONAL RETURN?

  CAN SOMBODY IF YOU PLEASE HELP ME?

  Hello

  There seems to be a series of Toshiba laptops we and that's why the recovery process can be different on Toshiba notebooks European

  However, the recovery procedure must be mentioned in the manual of the user. Check this box

  First try this:
  Switch on and press F8.
  Select Safe Mode, and then try to start the Windows mode without failure.
  If this does not work, try to repair the computer option.

  I think the laptop must be equipped with HARD drive recovery. This means that you could recover the device without the use of the recovery diskette.

  As mentioned it's series American TV to laptop and I know that you must press the 0 key immediately after the laptop has been powered.
  This should start the recovery

• Reference Dell 760 does not start, cannot access the bios menu

  Desktop Dell 760 not start and displays a message: unsupported video configuration detected. I can't access installation or the bios menu. any ideas?

  http://support.Dell.com/

  Link to Dell technical support above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Reference Dell coordinated at the link above.

  I'm sorry, but we cannot help you with Bios problems.

  See you soon.

  Mick Murphy - Microsoft partner

• Apllication failed startl does not start cannot locate wmv core.dill

  VHS dvd 4.0 deluxe sections ask mode advanced and recorder digital audio will not start up error message that this application has failed to start because core.dill wmv not found. Re-installing may correct the problem.

  Have reinstalled several times but still get the same error message.

  What should I do to crrect this problem

  Hi geo,

  I suggest you to scan sfc on the machine and check if it helps.
  http://support.Microsoft.com/kb/310747

• Recovery Manager cannot restore Presario CQ56 & system does not start, the error BOOTMGR is missing

  1. number and product name

  Compaq Presario CQ56

   

  2 operating system installed (if applicable)

  Windows 7

   

  3. error message (if any)

  in the error log:

  Your hard disk (result-failure) id # UAMBXQ - 5H06AK - XD003F - 618U03 - DISK 1

  Start (result-failure) id # UAMBXQ - 5H60AK - XD003F - 40G 403 MEMORY MODULE 2

   

  4. all changes made to your system until the problem occurred

   

  There is no change made to the computer, before the restoration of what the computer should start, however, it would freeze once the system was running. Restarting the computer didn't help, and when I tried to restore to an earlier point, he stated that it was impossible to complete the restore. I tried the factory reset, however, it gave me an error message: "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. Error code: 0xe0ef0003. When I tried to restart the computer later, it gave an error message: "BOOTMGR is missing, press Ctrl + Alt + Delete to restart» How can I fix it?

  305 error refers to a failing hard drive. You will need to replace the hard drive.

  You can check the status of your warranty here.

  If you do not want to repair the laptop you need to contact HP support. If you are in the United States / Canada you can give them a call at 1-800-474-6836. For other countries you will need to visit this site.

  If you do not want to repair the laptop you I can provide useful information, but I'm going to need your product number. This document contains instructions to find the product number.

  I'll keep an eye out for your answer.

• What to do when it does not start or recover after updating Vista SP1, error 0xc01a001d.

  This is the place where it freezes.
  37370 (\Registry\Machine\compo nets\Derived data...)
  Or
  Loaded\Windows\system32\drivers\crcdisk.sys
  Thank you
  Wine

  Hi wine,

  If you can get a full version of disc Vista, you can read the following article and try to perform a repair starter or the system restore.

  What are the system recovery options in Windows Vista?

  If you still experience the problem, try a Checkdsk to repair problems related to bad sectors, lost clusters, reticulate files and directory errors.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the lock buttonand then click restart. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click on command prompt.

  f. at a command prompt, type the following command and press on ENTER.

  chkdsk /f /r X: ( drive letter)

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. restart the computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows 7 does not start & cannot access the advanced boot options

  Ive a 4Yr old windows 7 computer acer laptop, on start-up I get black screen saying:

  PXE - E61: media test failure, check cable of
  PXE - MOF: out broadcom PXE ROM.
  No boot device insert the diskette boot & press one touch
  same message when I insert the disc of recovery, even when ive him asked to boot from the cd first through f2 drive, I can enter the setup through f2, but can't access boot options via f8, help! I don't know what else to do.
  Thanks in advance.

  Hello

  There are normally 3 possible reasons of this error you have.

  1 BIOS Boot Oder set to Network Boot: BIOS settings to check the boot order.

  Check the boot sequence, if possible and make sure that HD is set to 1 in the boot order

  2. check the cable connections between the motherboard and the hard disk to ensure that they are not loose

  3. doesn't have a hard drive.

  Test the hard drive.

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  See you soon.

• Satellite Pro U400 - WXP does not start & cannot run recovery is

  Help please!

  I tried running the recovery disc using the F12 key, I kept getting WARNING 'this HARD drive is not initialized' - initialize HARD drive & restart. are you sure you want to continue? I clicked on Yes-error F3e1000001 (HDD not not found) - I clicked on none he turned off the computer!

  I tried a different way by pressing the 0 im power on, because then I can no longer load window XP, it automatically runs 'Virtual disk Image', then by loading the tool recovery & followed the same HDD warning is not initialized & etc. and then eventually turn off the laptop itself!

  Please help if you can! Thank you!

  Hello

  I guess that your HARD drive is defective.
  The HARD drive is recognized in the BIOS?

  If this is not the case, replace the HARD drive and then try the recovery disk.

• Presario CQ60-615DX: Presario CQ60-615DX does not illuminate

  When it is connected to AC power and the button push, the headlamp three flash twice and nothing happens. If I immediately check the transformer, no juice, but after a few minutes it is good (short circuit and thermofuse?). Should I try once again after unplugging the hard drive or the DVD drive or assumed that the battery is at fault and change it? Yes, I have change the power jack connector nothing helps. Thank you.

  Hi @Wiseronny,

  Please the following link http://www.hp.com/contacthp allows you to create a folder for your problem and contact HP.
  If you do not live in the United States / Canada, please click on the link
  http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html for details in your area.

  Kind regards

• My Presario CQ61 NoteBook does not start. It shows a white screen.

  Hi, I'm back. This time, my laptop displays a white screen when I turn on. In addition, Caplock and Numlock indicators blink for 3 times and then the system powers off by itself and turn on again with a regular flashing, almost to infinity. I need a help. What could be the cause and what is the solution? Thank you.

  Hello

  If you have several modules of memory installed, try the following.

  In regards to the link below, delete one of your modules of memory and then see if the laptop will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to start.

  The procedure for withdrawal of these modules is detailed from Page 56 of your & Maintenance Guide.

  Kind regards

  DP - K

• Compaq Presario CQ62-412NR does not start. Caps lock flashes.

  The LED caps lock flashes repidadly with long breaks between each blink, the wireless light and constant and the adapter LED is steady. I read blink codes and determined, he was the processor, but the problem persists after him substituting a known good. I finished the resets power to clear the bios before and after the change of the CPU. I also tried to replace the RAM. Anyone here have a clue whats going on?

  This looks like a problem with the motherboard if you already replaced the CPU and RAM.
  
  It would be probably cheaper to replace the unit at this time only so, fix it or replace the motherboard.

• Compaq Presario CQ60-425SL: recharge the battery but the laptop does not start

  Hi, I tried to clean my laptop fan, because on the CPU temperatures up to 90 degrees Celsius. But after the opening of the laptop, clean the fan and put all the pieces together again once, it does not start. The led near the power cord plug is on, and the other indicating that the battery is also on. But when I press the power button / nothing happens. All cables and screws are in the right place. Model of the laptop Presario CQ60-425SL. Thank you!

  @georgedragan,

  Hello and thanks for the display on the HP support forums.  Here is the link to your maintenance and service guide.  What you can do, is use to open the new system and each point using the guide to make sure that everything goes back together in the right place.

  Compaq Presario CQ60 Notebook PC HP G60 Notebook PC Maintenance and Service Guide

  If you still experience problems at this time where the only option would be to contact HP support for service options.

  Use the following link to contact the correct service.

  Connect with the HP Support

  Please let me know how things are going.  Thanks again for posting and have a great day.

• Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

  Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

  Lately, I'm leaning toward the Hiren's BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

  Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

  If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• NEED to recover files from the xp computer that does not start.

  I changed startup on an old xp computer programs and now it does not start (I can accidentally put driver not run at startup). blue screen; STOP: 0x0000007B (0xF8992528, 0xC0000034, 0x00000000, 0x00000000) xp sp3 no safe mode without recovery does Center no disc. I just bought a computer to try to recover the information with win 7 but can not slave the drive to him because it is ide and the new computer is too modern. I need to save files are important on the xp computer is it possible to save them?

  I met this BSOD error several times, and the following fix usually (not always) allows the hard disk to be read by the system...

  -Boot your system and access the BIOS Setup
  -It will vary with different systems, but try to press "F2", "F10" or "delete".
  -If you need help with this step, let me know the model of the system, and I'll see what I can come up with
  -In the configuration of the BIOS, looking something like "Device Boot Configuration"
  -Go to the hard disk configuration and change the current option
  -Here are the most common options that I can think of:
  -SATA IDE, AHCI, (newer systems have more options, such as IRRT)
  -If the current option is "SATA", change it to "AHCI" or "IDE".
  -If the current option is 'DCIS', change it to "IDE", etc...

  It's just a quick run through a possible fix, without knowing the details of your system!  If you need more detailed help, I would like to know the details of the system, and we'll see what we can do!

  -Riley