Presario CQ62: obsolete BIOS presario cq62
Looking at the info from BIOS it says the modus BIOS are obsolete, but I can't find a newer version.
What to do next?
Kind regards
Marko
Downloadable here, F.37 BIOS:
http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52604.exe
You use the original BIOS to factory, and quite a few updates have been issued.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
Tags: Notebooks
Similar Questions
-
Obsolete BIOS can not find update
Hello, I need help with my bios oudated, is my 3.10 Phoenix-Award BIOS and the last update was made in 2006, so it is very old. I don't have the computer all this time and I'm young enough, so I didn't know the BIOS. I tried to find an update for the bios but I can't find one.
Any help is appreciated.
Thank you.
I have an impossible to access your link because of global permissions on networks that I use. Please provide the full HP p/n (part number) of the motherboard or insert pictures of HP labels on the motherboard as shown below;
Please note that your labels will vary and the 'P/N' may be of a different format.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
Presario CQ62 with BIOS password
I just bought a CQ62 and discovered that it has a BIOS password. It happens eventually with a disabled system key: 72677771
How can I get a code to unlock it?
Thank you
Meniga
Hi Meniga
Come in:
63755377
-
Presario CQ62: Hp Presario cq62 bios password reset
Hello. I want to open the bios Setup, but it asks me the administrator password. After that 3 bad test error code is [62429887].
I tried the password: 70641938
75721087
75974169
NOTE: I can only enter 6 digits in the password field.
Please help me!
Thanks in advance.
Hello:
Enter the unlock code... You should be able to enter the 8-digit. If you can not I do not know the reason why.
73581209
-
Presario cq62: password bios clear (Compaq CQ-62)
My laptop has a bios code preventing it from loading after having a friend and they don't know what the code is and said that they did not do. I saw a post were someone could help with this, but I was unable to put in the post to ask. I tried 3 attempts of unlocking and got system disable code: 66791413, please help
Hello
Please try:
79699435
Kind regards.
-
Laptop Presario CQ62: SETTING THE BIOS TO BOOT FROM a USB STICK
I need to set the BIOS to boot from a usb key. The options in the BIOS are
BOOT CD-ROM
Startup disk
Internal network cardAnd in the boot order:
USB disk on key/USB hard drive
USB CD/DVD ROM drivePortable hard drive
USB floppy drive
Internal CD/DVD drive! Network adapter (but it says that the ability to start will be disabled if the device is marked with an exclamation point, which, in my case, it is)
A question who should I set to boot from a usb flash drive which has the operating system that you want to install Windows?
I tried boot F9 options, but it gives me two options:
Portable hard drive
CD/DVD drive.
No drive Flash Drive or USB in the list options.Then he said: press F10 for BIOS Setup Options. That's why I'm trying to see what to implement as boot device in the BIOS boot options.
-
clear the bios password on presario cq62
The code lock on the screen is
99202430
can you help me pleaseTry MB.
26160416
Use this code to go into the BIOS.
Disable all passwords that are enabled.
If demand for CURRENT password using this code.
Request NEW password just press ENTER.
If asked to hit just to CHECK password to enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
Compaq presario CQ62: clear bios password
Hello my key after 3 failed password is 68719117.
Please help, thanks!
Cindy
Try 77671139
If it works, go to the BIOS and clear/disable password. Use the code as the old password and let the new white.
-
Presario CQ62: Bios password reset
Same problem
The code is 58071743
Help, please?
Hello
Enter 47959385
Kind regards
DP - K
-
clear my bios administrator password for compaq presario CQ62 (my code 63859453
pleaase help (my code 63859453)
Hello
Please try:
72731495
Kind regards.
-
Impossible to install Win7 on Qosmio F30-112
There is a problem with ICH7 driver trying a CD installation and obsolete BIOS problem when you try to upgrade existing instalation of Win.
Where to get propper ICH7 driver or where to find the upgrade of BIOS? F30 - 112 is no longer on the Toshiba support list.The latest version of the bios of your laptop either 3, 90 - WIN, can be downloaded from http://support1.toshiba-tro.de/tedd-files2/0/bios-20080505133719.zip here. Check your current version!
-
HP ENVY h8-1409: upgrade the GPU card mother IPMMB-FM (Formosa)
I currently have a ti 750 EVGA installed without any problem with this motherboard. The BIOS on this forum is listed as UEFI with a version of 8.21 FRIEND whose date of 21/10/2014.
I'll be able to spend to the 10xx GTX as a 1060 series, or maybe a RX 480 without any obsolete BIOS problem? I know that some old motherboards from HP could not start even a card GTX series 7xx due to an outdated BIOS that HP did not update.
Hello
You said that the jury is listed with FRIEND 8.21. Check that your PC is running FRIEND 8.21?
You shouldn't have a problem to start the recent graphics cards, if your computer is running a version 8 BIOS. Ensure that the selected card suits and corresponds to the power supply of your PC.
-
New Dell Latitude 3540 with Windows 7 Professional, which stops unexpectedly.
When Windows 7 stops without warning I have to restart even if the protection of the system is checked for an automatic restart.
When I reboot I get the black screen asking if I want to start in safe mode, because Windows was not shut down properly. I usually start it in normal mode and it works very well.
This occurs on average about once every three to four weeks and can be at any time, that is to say that I might be in Outlook, Word or surf the net, etc.. I do not make any game.
Can you help me
Hello
Thank you our writing about Microsoft Community.
There are various reasons that can lead to random the computer stop. Heating, hardware problems and an outdated version of the BIOS are some of the main culprit.
I would ask allows you to check if the computer is getting overheated while it shuts down.
To check for hardware problems, I would recommend that you run Dell Hardware Diagnostic tool.
For more information on Dell Hardware Diagnostic tool, please see the link below.
Obsolete BIOS can also cause computer to stop randomly, depending on the version of Windows installed on your computer, please download and install the latest firmware of the BIOS from the link provided below.
http://www.Dell.com/support/home/us/en/19/product-support/product/latitude-3540-laptop/warranty
Note:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Please let us know the State of the question, so that we can help you further.
-
Compaq Presario CQ62-a20EC does not load
OK, the original (defective) power adapter details are:
Pei/n: 608425-003
-spare part: 609939-001
The other of Presario CQ61-315EC that I used for the test is:
Pei/n: 519329-002
-spare part: 463958-001
Part Locator does not contain my country (Slovakia). I played with him in selecting other nearby countries, but it has not helped me a lot. I contacted three local stores for proper AC adapter and I already bought a.
p/n: 608425-001 - this has a different suffix as the original
-spare part: 609939-001
CQ62-a20EC works correctly with both above mentioned functional power supplies.
==
There is another problem that appeared in fact after the update of the BIOS (F.8-> F2. (B).
(Press F2 during POST) diagnostic-> battery test system:
-F.8 BIOS with defective power supply = > has failed with the message "no adapter not connected" - this seems reasonable
-BIOS f.2bs with defective power supply = > failure with "primary - replace (30)", failure id: 0GFM7R - 52T 693 - 9XL03G - C0E903 - sounds strange and I do not expect such different error after BIOS update
-BIOS f.2bs with the new power adapter = > failure with "primary - replace (30)", failure id: 0GFM7R - 52T 699 - 9XL03G - C0E903 - please see that failure is different
-
Wireless problem Compaq Presario CQ62 220 sv here is the solution! for 220 sv!
Hi, I need help! Fast please I have a compaq presario CQ62 and do not work wireless
I installed the driver for the wireless, but do not work
is a BIOS problem? or anithing alse
Please I need help! Fast!
Thanks, Alex
Sorry for my bad English!
FAST!
Update > I enter the device maneger and network controller is not installed
Hardware ID >
PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
PCI\VEN_10EC & DEV_8171 & CC_028000
PCI\VEN_10EC & DEV_8171 & CC_0280Hello
First of all, download and reinstall the Chipset driver from the link below.
http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46940.exe
When this has completed, restart the laptop.
When windows has completely recharged, download and install the Realtek WLAN driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46673.exe
Kind regards
DP - K
Maybe you are looking for
-
Equium L40 - 10 X brightness issue
EQUIUM L40-10 X, brightness Please could someone help me, I recently bought an EQUIUM L40-10 X and it came with windows vista so I erased everything on and put windows xp pro sp2 + and everything works and is installed its similar 100 x faster now an
-
Stage custom expression edition open when it is placed in the order
TestStand 3.5 is possible to create a custom step (for a copy of the label step type) type that automatically opens the "edit label step...." GUI when it is placed in a sequence? Thank youJason
-
Update for Windows Vista (KB978338) security, code error 80004004
Tried to perform my automatic update tonight, security for Windows Vista (KB978338) has not however one number of other updates succeeded. I received an error code 80004004 for the update has failed. How can I get this update take? Pretty novice a
-
Re-install win xp oem existing c: drive
I installed windows xp oem hard disk C:. I have reason to believe that the operating system is corrupt. I want to reinstall the same xp oem halogram dvd on the hard drive in the same card mother/ram/card video/hard drives. When I boot from the dvd, I
-
BlackBerry App Telltale walking dead
Tell tales in walking dead will appear in the world of blackberry?