Presario does not start
Presario CQ61 won't start. It flashes the witnesses power and drive forward three times but nothing happens. It was running last night when I left this download a upgrade to WIndows 7 (I don't know who, alone of the automatic upgrade) and he said "do not turn off." Is there any hope for him?
I found the problem. Your advice was leads me to a bad decision. Duh. I should have checked that before worrying about you all. Thanks for the good advice.
Tags: Notebooks
Similar Questions
-
Compaq Presario CQ60-425SL: recharge the battery but the laptop does not start
Hi, I tried to clean my laptop fan, because on the CPU temperatures up to 90 degrees Celsius. But after the opening of the laptop, clean the fan and put all the pieces together again once, it does not start. The led near the power cord plug is on, and the other indicating that the battery is also on. But when I press the power button / nothing happens. All cables and screws are in the right place. Model of the laptop Presario CQ60-425SL. Thank you!
Hello and thanks for the display on the HP support forums. Here is the link to your maintenance and service guide. What you can do, is use to open the new system and each point using the guide to make sure that everything goes back together in the right place.
Compaq Presario CQ60 Notebook PC HP G60 Notebook PC Maintenance and Service Guide
If you still experience problems at this time where the only option would be to contact HP support for service options.
Use the following link to contact the correct service.
Please let me know how things are going. Thanks again for posting and have a great day.
-
Computer does not start after the screen of the bios, Compaq Presario SR1023WM
Ok. Trying to fix a friend's computer and seem to have met a strange barrier.
Problem: The computer does not start after the bios screen.
Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well. And that's it as far as the computer becomes. After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect. I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point. I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected. Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success. I tried using a different memory stick and different memory as well... Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).
The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.
http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.
I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.
I have a pretty strong understanding of computer repair, so feel free to give me something to try.
If you need more information out of me, let me know as well.
Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.
At the back of the pc is the condition of the PSU led green or flashing?
-
Computer does not start. Automatic start of repair can not solve the problem. Description of the problem: StartupRepairV2 AutoFailover 6.0.6001.18000.6.0.6001.18000 6 45879 SystemRestore NoRootCause NoRootCause 1 0 0 6.0.6001.2.1.0.256.1 3082'd appreciate any help how to solve... have pictures of family etc. on the pc!
Boy, that might be embarrassing. Just open the HP total care advisor and can see that the C: drive is full 99%... so I guess that's the problem? Apart from deleting files or programs not needed... any recommendations for doing this?
-
CD player does not start automatically
HP Presario CQ71-140EA; Windows 7 Professional.
When you insert a CD into the CD player, that player does not start automatically.
I have to launch Windows Media Player or iTunes before CD games. Any ideas please?
Hello:
Please see if this tutorial will solve your problem.
http://windows7support247.blogspot.com/2010/12/how-to-enable-or-disable-Autorun-for.html
Paul
-
When my power supply laptop (Presario CQ40 AMD Turionx2) on, it cannot start with a black screen and no response to all keys. The lights indicating Caplock and Numlock Flash four times. I appreciate if someone here can advice me a clue?
Siowlian wrote:
When my power supply laptop (Presario CQ40 AMD Turionx2) on, it cannot start with a black screen and no response to all keys. The lights indicating Caplock and Numlock Flash four times. I appreciate if someone here can advice me a clue?
Hello
Let me help you SLEEP that...
Here's something first, read about this document:
Computer does not start and the lights blink or the computer will beep
Follow each steps quickly.
I suspect graphics controller does not work.
Hope this helps,
Thank you
* "ACCEPT MY SOLUTION" to HELP others THE PROBLEM SIMILAR & CLICK KUDOS TO APPRECIATE MY ANSWER *.
-
CPU does not start. No beeps.
I have a Compaq Presario SR1729NX. It's mostly stock except for the memory and video update. I noticed a week or two ago she turned slowly. When I went it reboot, all the lights were flashing as they do normally, but the fan just spun and 'polyurethanerouge '. Held the power button for 10 seconds and it has restarted correctly. A restart a week later took five times. Today, it does not start. I read through the forum, and a person with a similar probem was asked about a bulging capacitor. I don't have one, but it is not rounded to the breaking point. What are the chances that a bulging capacitor is the problem? I'll be able to fix it myself? Thanks in advance for all advice.
The motherboard is: EK458-69001
I found a supplier for this part right hereonline.
Motherboards are not so difficult to replace in a desktop computer.
-
Computer does not start after the screen goes blank &; Compaq.
Hello
A few weeks ago, I turned on my PC and it showed at the Compaq screen and then went to a blank screen & would not respond. I held the switch button to turn it off and after 4 attempts, it start fine. Next time, it took 20 attempts to initialize and now it does not start, it will be maybe if I try like 100 times he can do... The problem is when the Compaq screen comes up it comes only for like a second so I know that it does not start, if the Compaq screen stays for a few seconds as 3 + I know it will load windows and start.
History > the computer originally had XP and has been replaced with VISTA memory was 2 * 512MB, but it was a bit slow and I was advised to upgrade. I bought 2 * 1 GB memory and put it in my PC a few months there may be 5 + had no problem so far.
I tried the following:
Remove the memory and replace it. Remove the 2 * 1 GB of memory and its replacement by the Moose 2 * 512MB to check if the memory is at fault.
Cleaning of the dust around the fan (at this point, I removed the fan over the CPU and cleaned the thermal compound from the CPU to make it nice and shiny, only tried to start one time after that for a few seconds heard blowing fan and turend it took off. Depuis_lors, I realized that it wasn't just muck and had a purpose na derwiche put a little more on)
Remove the battery of the BIOS for half a day
Move jumpers CMOS from1, 2 to 2, 3 positions
I can not get into the same if BIOS start and hold F1 he will show me the BIOS for a second and then go to a black screen.
Specifications of the computer
Compaq Presario SR1629UK desktop PC
Details can be found in the following link
http://support.HP.com/us-en/document/c00579251
Your help would me much appreciated...
Hi guys,.
Thanks for your help, I wanted to just give you a batch update. After the grueling process of verifying the destop, memory suppression, cleaning it & all the other techo checks. I gave my pc to somone to look to the he tried not to turn on he opened it removed cleaning my thermal paste back on and told me it was working fine.
When I bought home all happy, I realized that I had the same problem, I borrowed another monitor and found it worked well! So the question is with my monitor, if anyone has the same problem first check another monitor.
-
Hello!
As you can guess Windows Update is not installed for a few months. Cryptographic services does not start . CPP is the beginning.
Error: 80070426
Already tried a few suggestions MSKB.
Method 2: Set Cryptographic Services to automatic, network logon. Result: Error (unsigned) 1083
Method 3: Rename the Catroot2 folder
Reregister DLL files that are associated with Cryptographic Services.
However, suite couldn ' t be installed.regsvr32 initpki.dll
regsvr32 gpkcsp.dllregsvr32 sccbase.dll
regsvr32 slbcsp.dllDCOM service - access denied when running.
sfc/scannow couldn't fix some corrupted files.
Computer HP laptop came with Vista pre-installed, so I do not have the repair disk.
No doubt the system restore won't help, as I remember recently that c-Cleaner wiped the old restore points.
NOD32 Antivirus + Spyware Doctor still running. Already run MSRT and Super Spyware, but nothing much.
Kindly help!
Kind regards
Satyajit
Diagnostic report (1.9.0011.0):
-----------------------------------------
Given WGA-->
Validation status: genuine
Validation code: 0Code of Validation caching: 0x0
Windows product key: *-* - GD2PK - BD3R2-44MV3
The Windows Product Key hash: f7FPE6g/CLFmnJ4E6GbEU9Xn1sA =
Windows product ID: 89572-OEM-7332166-00021
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6000.2.00010300.0.0.002
ID: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D} (3)
Admin: Yes
TestCab: 0x0
WGA version: registered, 1.9.9.1
Signed by: Microsoft
Product name: Windows Vista (TM) Home Basic
Architecture: 0x00000000
Build lab: 6000.vista_gdr.080917 - 1612
TTS Error: M:20091104073513946-
Validation of diagnosis:
Resolution state: n/aWgaER data-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: 6.0.6002.16398WGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 103 blocked VLK
Microsoft Office Enterprise 2007 - 103 blocked VLK
Microsoft Office Home and Student 2007-100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\Slsvc.exe[6.0.6000.16509]
[File mismatch: C:\Windows\system32\drivers\Spsys.sys[6.0.5840.16389]
[File mismatch: C:\Windows\system32\Slcext.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\advapi32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\kernel32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rpcrt4.dll[6.0.6000.16525]
[File mismatch: C:\Windows\system32\authz.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\msvcrt.dll[7.0.6000.16386]
[File mismatch: C:\Windows\system32\samlib.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\ntdsapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\dnsapi.dll[6.0.6000.16615]
[File mismatch: C:\Windows\system32\ws2_32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\nsi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\user32.dll[6.0.6000.16438]
[File mismatch: C:\Windows\system32\gdi32.dll[6.0.6000.16766]
[File mismatch: C:\Windows\system32\msimg32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\powrprof.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\setupapi.dll[6.0.6000.16609]
[File mismatch: C:\Windows\system32\oleaut32.dll[6.0.6000.16609]
[File mismatch: C:\Windows\system32\ole32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\shell32.dll[6.0.6000.16774]
[File mismatch: C:\Windows\system32\shlwapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\version.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winmm.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\oleacc.dll[4.2.5406.0]
[File mismatch: C:\Windows\system32\mmdevapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wtsapi32.dll[6.0.6000.16553]
[File mismatch: C:\Windows\system32\regapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\crypt32.dll[6.0.6000.16425]
[File mismatch: C:\Windows\system32\msasn1.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\userenv.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\secur32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\netapi32.dll[6.0.6000.16764]
[File mismatch: C:\Windows\system32\psapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\netrap.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wldap32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winbrand.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\iphlpapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\dhcpcsvc.dll[6.0.6000.16512]
[File mismatch: C:\Windows\system32\winnsi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\dhcpcsvc6.dll[6.0.6000.16512]
[File mismatch: C:\Windows\system32\gpapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\slc.dll[6.0.6000.16509]
[File mismatch: C:\Windows\system32\gpsvc.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\sysntfy.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winsta.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\nlaapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\ncrypt.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\bcrypt.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mpr.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\credui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\cryptui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wintrust.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\imagehlp.dll[6.0.6000.16470]
[File mismatch: C:\Windows\system32\dbghelp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mssign32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wininet.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\normaliz.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\iertutil.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\tapi32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rtutils.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rasapi32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rasman.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rasdlg.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mprapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\activeds.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\adsldpc.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\atl.dll[3.5.2284.0]
[File mismatch: C:\Windows\system32\certcli.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winscard.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\netplwiz.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\urlmon.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\propsys.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\xmllite.dll[1.1.1002.0]
[File mismatch: C:\Windows\system32\mlang.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\advpack.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\apphelp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\msiltcfg.dll[4.0.6000.16386]
[File mismatch: C:\Windows\system32\shunimpl.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\devmgr.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\newdev.dll[6.0.5054.0]
[File mismatch: C:\Windows\system32\dwmapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winspool.drv[6.0.6000.16386]
[File mismatch: C:\Windows\system32\cscapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\windowscodecs.dll[6.0.6000.16740]
[File mismatch: C:\Windows\system32\ntshrui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\feclient.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\shdocvw.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\imm32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\msctf.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\duser.dll[6.0.6000.16386]
[File mismatch: C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16386_none_9ea0ac9ec96e7127\gdiplus.dll[5.2.6000.16386]
[File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16550_none_56f0fd51b4f462f8\gdiplus.dll[hr = 0 x 80070002]
[File mismatch: C:\Windows\system32\msrating.dll[7.0.6000.16386]
[File mismatch: C:\Windows\system32\ieframe.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\msi.dll[4.0.6000.16386]
[File mismatch: C:\Windows\system32\mshtml.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\msls31.dll[3.10.349.0]
[File mismatch: C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_87e0cb09378714f1\comctl32.dll[5.82.6000.16386]
[File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_40339432230aebeb\comctl32.dll[hr = 0 x 80070002]
[File mismatch: C:\Windows\system32\comdlg32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\printui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\cfgmgr32.dll[6.0.6000.16609]
[File mismatch: C:\Windows\system32\puiapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\hlink.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\imgutil.dll[7.0.6000.16386]
[File mismatch: C:\Windows\system32\usp10.dll[1.626.6000.16386]
[File mismatch: C:\Windows\system32\inetcomm.dll[6.0.6000.16669]
[File mismatch: C:\Windows\system32\msoert2.dll[6.0.6000.16480]
[File mismatch: C:\Windows\system32\ieui.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\efsadu.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mfc42u.dll[6.6.8063.0]
[File mismatch: C:\Windows\system32\odbc32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\oledlg.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\linkinfo.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\query.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\clbcatq.dll[2001.12.6930.16386]
[File mismatch: C:\Windows\system32\cabinet.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\scecli.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\w32topl.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rpchttp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winhttp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\fwpuclnt.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\ktmw32.dll[6.0.6000.16386]Other data-->
Office details:{5FC29B42-80DC-4BE3-B5EA-37281853FA7D} 1.9.0011.0 6.0.6000.2.00010300.0.0.002 x 32 *-*-*-*-44MV3 89572-OEM-7332166-00021 2 S-1-5-21-3747016915-1105364745-1034703816 Hewlett-Packard laptop Presario V6500 Hewlett-Packard F.2A 20080222000000.000000 + 000A4313507018400EE 4009 0409 India Standard Time(GMT+05:30) 0 3 HPQOEM SLIC-MPC 103 103 12 C0A25836FDBE5AC FmDbcrRY1pTOcrz4ZUZRHhpUuc0 = Microsoft Office Enterprise 2007 89388 726-2958074-6564314 100 Microsoft Office home and Student 2007 12 19 Spsys.log Content: U1BMRwEAAAAAAQAABAAAAC58AgAAAAAAYWECADAgAADCBCA/81zKARhDs/4hWdo7Xkl9D+HKpni6Sfv7jmoHEBVqqW/xcrQYytms9RtRtLWsIPXcLJpmwOfDvX0zCybmDilyQLttVIyTRhimAiUiBLOYhz3eEQj3sEGnmR0ReJ9KlWCJouxq6PAIwHwHVMfvNauSbFvmaTCDPKtQZQFIQcDXIAwFGl6D9S/GUDYecePFRKM/leS97bxOVVm9fICZUkfHdDNbo72qUqYYmAlRJO05+WV1r70w2O6Pl99gqTnSYR4j0FashTOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAw=
License data-->
The software licensing service version: 6.0.6000.16509
Name: Windows Vista HomeBasic edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: 199086aa-6cb8-4e5b-b698-f2be56f1e8ee
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89572-00146-321-600021-02-16393-6000.0000-0492008
Installation ID: 234075993312598255872244522405847072649516093605215141
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
Partial product key: 44MV3
License status: licensed--> HWID data
Current Hash HWID: QAAAAAEABwABAAIAAgABAAAAAwABAAEAnJ9ERYTHdhu84yC + gASIzAaYmGC6ZEQsznDy9J4v6lrYfiqsrFZ4qg isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP NVIDIA MCP67-M
SRAT AMD HAMMER
HPET PTLTD HPETTBL
START PTLTD $SBFTBL$
MCFG MCFG PTLTD
TCPA Phoenix x
SSDT PTLTD POWERNOW
SLIC SLIC-MPC HPQOEMThank God!
Finally, I worked it out myself. But it's painful to watch than virtually any other that Uday has responded to my problem. Something I've been waiting for so eagerly.
I applied my common sense and defragmented the dirives then sfc/scannow, and it worked. Cryptographic Services said when I began to log in as network account. So my problem is solved. Now, windows update works fine.
Interestingly, Microsoft Fix it, says it cannot start the Cryptographic Services. Are God, while the _____ you supposed to difficulty? It made Internet Explorer icon on my desktop and other places.
-
Compaq does not start without charger
First of all:
Product name: Compaq Presario CQ57 301SA
Operating system: Windows 7 Home Premium (64-bit)
My problem is that whenever I try to boot my laptop with only the battery as energy source, it does not start. The equipment starts and everything, but displays only a black screen. No flashing in the keyboard and the power led is displayed.
If I plug in charger and connect it to the laptop, which is the only time that the contineus to laptop to display the startup process.
At first I thought that there may be a problem in the battery, but it is completely charged (100%), said the HP battery check is OK, and whenever I remove the charger after startup and the logon Windows stage, the laptop does not turn off.
Just for the background story: I recently sent my HP laptop for hardware failure and they replaced my motherboard. When I picked up, they turned on without the charger plugged and it starts up successfully. When I turned it on in my own home, this happens.
Any thoughts?
Thank you.
Hello Kazu081,
Did you get this resolved? I thought that since you had the motherboard replaced, and that's when your troubles started, you must call and speak with a representative. Let them know what is happening and please let me know the results.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
Good luck!
-
Call of duty black ops does not start on my pc and another game in hand is intall correctly
I have compaq presario pc with processor pentium 4 3.2 ghz, 1 GB, vga 256 MB ram and 32-bit Windows 7...
but call of duty black ops does not start on my pc and another game in hand is intall correctly...Please tell me the solution...I'm sure that if you looked at the requirements on the box, you would see that you do not respect the minimum requiremnts to run the game.
You need at least a Core 2 Duo E6600 or better cpu and 2 gigabytes of memory.
-
My laptop fell and does not start
Hello! My compaq presario cq56 bowed down and now won't start. I opened it and checked everything. Hars battery, memory disks. I have replaced everything but nothing. I checked the mem, battery and the drive on my second laptop and it worked. When I connect to the AC, the indicator light is on, but when I push the power button, it does NOTHING. What should I check?
Unfortunately, it will have to be disassembled and inspected if it is does not start due to a fight with gravity.
Warranty does not cover damage inducer owner, even if inadvertently.
You could try to remove the hard drive and then see if the laptop responds to the power button. If the motherboard is OK, the BIOS must meet in showing an error message that says it found no bootable disk (or operating system) found. A fall can make a hard drive unusable.
-
Siri does not start under macOS Sierra
I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.
In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.
Y at - he of the log files that I should be reviewed to determine the cause of this problem?
Thank you
Steve
Same thing here on a MacBook Pro (13 inch, late 2011)
-
I have a 10 year old black Macbook, which does not start when a battery is installed. If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off. I got a new battery and charge it where the charger turned green, but the results are the same.
Any suggestions?
It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.
http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.
-
iPhone hot 5s fees and does not start
phone is connected to the load. After a while I checked it and it was very hot. I unplugged it and now it does not start.
Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.
More troubleshooting can be found in this article:
If your iPhone, iPad, doesn't respond or won't turn on - Apple Support
Maybe you are looking for
-
As I upgraded Microsoft Office 2011 updated 14.6.2, Word documents are converted to PDF in Word 2011 appear in the preview with a ¼ of an inch from the edge of the page border and the border is printed on each page. This happens not when the pdf file
-
So I need to install windows, but I can not access the boot menu. And the laptop whitch password of bios that I don't know. Is there way to delete the password? Tried to remove the CMOS battery for a few hours, but it does not work.
-
Optiarc DVD RW AD - 7560A ATA DEVICE do not work
My CD-ROM/DVD-ROM does not work. Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.1 device state poster (this device cannot start. (code 10)).2 update driver... shows that the best device driver software is already instal
-
How to change the name "complete."
WNE Yes, I bought my computer, there is already a user called Test, I put in place with her for a year now, but only now, for some reason, has my OCD began to kick. I don't know what will happen if I make a new user, but I don't want to lose any of m
-
How can I put a "/" in my url?
I have a site in multiple languages. I made different pages in Muse and calls them "EN/CONTACT". But muse does not put the "/" in the url...He always dissapeares.