Presence of Lync Mobile 2010

Similar Questions

• MS VirtualLab Lync Server 2010 does not. error code 1. tested from multiple PCs. What is the problem?

  Hello
   
  While trying to start wirtual lab I received the following error:
   
  There was an error in the environment of virtual laboratory of construction. Try again or contact support support if the problem persists. Error code: 1. status: failed
   
  I tried to run the laboratories of different pc and got the same error each time.
   
  Please specify what is the problem?
   
  Yesterday, I used these labs without all the problems.
   
  I added the site in the zone of confidence. also all of the custom software add-ons necessary have been installed.
   
  Thanks in advance.

  Hi AndriiKyianov,

  Thanks for posting your question in the Microsoft answers Forum. Your question about Lync Server 2010 it will be better answered by experts in the Lync Server Forums. Please repost your question here.

• How do microsoft lync 2010 live on the public ip address?

  Can someone help me how to make server lync 2010 live to use the lync client 2010 outside the network by using the intellectual property of live\public?

  Hello

  I suggest you address questions of Lync Support forum for better support.

  Here is the link: http://social.technet.microsoft.com/Forums/en-US/ocsclients/threads

• Migrate the file server between domains in the same server, I need to do?

  I need to know the steps to migrate between areas without movingdata diferents fileserver will be because in the same server. I have found no support document, or someone who did share their experiences, I onlyfound for information on how to migrate a file server between domains but mobile from one server to another with the WSTF tool. -

  The information of my it environment is based on Windows 2008 R2 with the domain Active Directory forest root, with Exchange 2010 and Lync Server 2010.
  Thanks for any help. See you soon. Good bye.
  Kind regards
  Diego Alonso.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• 500FPS when imorting mp4 video of the Nokia N8

  When I import video of the Nokia N8 (.mp4) to PrE9 it detects the cadence at 500FPS and the clip duration is reduced. The music video plays too fast and slow. The sound is normal except a short part of it is played. The clip normally plays in VLC, Quicktime, Media Player Win.

  GSpot report:

  File_name 20101230011.mp4
  FILE_NAME_WITH_PATH C:\Users\Uffe\Videos\Mobil\2010-12\20101230011.mp4
  FILE_SIZE 26,339,727
  CONT_AUDIO_STREAM_COUNT 1
  CONT_BASETYPE MP4 indeterminate (.) MP4 file)
  CONT_TOTAL_BITRATE 0
  VIDEO_BITRATE 10855
  VIDEO_CODEC_NAME H.264/MPEG-4 AVC
  VIDEO_CODEC_STATUS Codec status undetermined
  VIDEO_CODEC_TYPE avc1
  VIDEO_DAR 1.778
  VIDEO_DURATION 0:19.185
  VIDEO_FRAME_COUNT 477
  VIDEO_FRAMES_PER_SEC 24.979
  VIDEO_PICS_PER_SEC 24.979
  VIDEO_QF 0.472
  VIDEO_SAR 1.778
  VIDEO_SIZE_X 1280
  VIDEO_SIZE_Y 720
  AUDIO_BITRATE 128
  AUDIO_CHANNEL_COUNT 2
  AUDIO_CODEC m4as: MPEG-4 AAC LC
  AUDIO_CODEC_STATUS Codec status undetermined
  AUDIO_SAMPLE_RATE 48000

  Any idea? Codec from Adobe?

  My config: HP EliteBook 6930p, Win7 64-bit.

  Thank you

  Ulf

  http://kb2.Adobe.com/CPS/887/cpsid_88760.html

  Please let us know if that helps.

  Team first Elements

• VCS 7.2.2. and the integration of Lync 2010

  Hi all / Andreas,.

  I was hoping that you could help us with a problem we have in our lab environment to get one of our areas of Lync 2010 and our video customers talk together.

  Basically, we have only one video field ([email protected] / * /-2 areas of Lync and [email protected] / * / and [email protected] / * / )

  We use a single gateway to lync VC to our laboratory and a VC control that takes care of all the [email protected] / * / registered customers.

  The [email protected] / * / can make calls with the two areas of lync 1 and 2 with success.

  However only Lync field 1 can communicate with our [email protected] / * /. Lync doman 2 users can not reach a customer VC that their presence shows unknown.

  We have no active findMe and prefer not to do this now. (If no record of FindMe on Lync)

  Any suggestions/help would be appreciated... Is it even possible that we are trying to achieve?

  Thank you

  SC

  With the help of several areas and a third domain for shared video endponints for these two areas is not at least common deployment.

  For the best support findme is btw a requirement.

  If you want to use two different areas that you would waste away should look into if the old relay of ocs / road direct way might

  be a workaround or get two VCS (clusters), one for each area of lync you can point only to a lync destination

  address signaling. Not sure if you can fix the routing to Domain2 also in both servers lync.

  If you do not get a response better / more input here, be sure to ask your Cisco partner / rep.

• Integration of Lync B2BUA and presence

  Hello

  I try to get the presence working between Lync and VCS. I use Findme exposed in Microsoft OCS 2007, Lync 2010, and Cisco VCS methodology

  Deployment Guide Cisco VCS x7.1.  We use x7.1 and we have a dedicated control of VCS and a second dedicated VCSLyncGW, we use the running 4.2 and 5.1 codec C20. We have followed the guide and all end points in a subdomain that Lync would start to VCS for the endpoints that are not configured with Findme accounts.

  Presence seems to work as it should for staticly assigned endpoints, but for the endpoints findme we can't operate the presence. Calls will work very well between Lync Clents and endpoints are configured with Findme accounts.

  When I go to VCSLyncGW and look under the OCS/Lync user status it shows the uri "findeme" with a State of the presence of 'offline' but his 'seat' and 'subscribe '.

  I made sure that the account of Lync was first Setup and connected to her waiting 10 minutes before setting up the account findme.

  Tips on how to solve the problems?

  Ryan,

  did you do that to combine devices in these accounts, using the URI FindMe ([email protected] / * /)?

  Could you maybe post a screenshot of one of the accounts FindMe, showing its features and places?

  The presence server is enabled on the VCS of GW Lync and not the other control VCS?

• After updating to release 21.0, I'm more able to join a meeting by using Microsoft Lync 2010 online if Firefox is set as my default browser.

  After updating to release 21.0, I'm more able to join a meeting by using Microsoft Lync 2010 online if Firefox is set as my default browser. I am invited to "Join the meeting using your web browser" or "download and install Lync participating." None of these options work. Join using web browser results in a command prompt to install missing plugins, but then no appropriate plugins can be found. Try to install Lync Attendee fails because Lync 2010 is already installed.

  I also tried to install the beta version of Firefox 22.0, but the problem persists.

  Hello ScottRey, please try this: enter about: config in the firefox address bar (confirm the message information where it appears) and search for the preference named plugins.load_appdir_plugins. Double-click it and change its value to true (a restart of the browser may be needed later for the change to take effect). some information on the issue are explained in http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/

• How to get Firefox Mobile to open Outlook Web Access Premium 2010/Full?

  Microsoft Exchange Website indicates that Firefox is one of the browsers to access the full/premium version of OWA 2010 level 1.

  Firefox (v. 16) on my desktop and laptop computers accessing premium/full version of OWA 2010.

  However, the two (v.17 and Beta 18) Firefox for Android and Tablet do NOT access bonus/full version of OWA. Only a light version of OWA is available. Check box for the light version can be deselected.

  What settings can I change or add-ons can install to access premium/full version of OWA using Firefox Mobile?

  Thank you.

  I wonder if it is wise to use a web application 3-column on a tiny screen. That said, you can try to pass for a desktop browser by changing the user agent. There is an add-on called Phony that may be useful for testing.

• Why would MS Lync 2010 will not connect you without company VPN?

  I work in the service desk and I was the user who could not connect to MS-Lync 2010 without a company VPN, user asked me why and I was not completely answering his question no matter who wants to answer this question in order to expand my knowledge?

  Hello

  Your question is beyond the scope of this community.

  I suggest that you post your question in the Forums on Technet Lync.

  https://social.technet.Microsoft.com/forums/Lync/en-us/home?category=Lync

  See you soon.

• With the help of MicroSoft Lync 2010

  I am currently using MicroSoft Lync 2010 and when I send an invitaiton to someone I can share my screen, but when I try to make him the presenter it does not work? all ideas

  Hello

  These Forums, the community of Microsoft (formerly responses).
  does not specifically support Lync.

  You should also check in the Lync Forums:

  Lync - Forums
  http://Lync.Microsoft.com/en-us/communities/pages/communities.aspx?title=forums

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Lync 2010 - different tone for internal vs external calls

  Is there a way to Lync 2010 to make a distinction between internal vs external calls? Now, if you are already online, you get a beep if a call comes in to the general response group or if it comes from an internal caller.  How can I configure the system so that people can make a difference? All suggestions will be useful!

  Hello

  The question you have posted is related to Lync2010 Forum, and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs/

  You can also check this link: http://technet.microsoft.com/en-us/library/gg195677.aspx

• Lync 2010 - is lack of submit button?

  Hello

  I am using Lync 2010.

  It is one of the best application for communication.

  However, I use the mouse more keyboard to copy paste the content.

  that works very well, my question is sent the message I have to press the ENTER key on the keyboard.

  so I think that microsoft should add send button on the user interface, which will allow the user to the message sent on a click (mouse).

  It will also help others.

  Best regards, Céline

  Hello

  Your question/request is beyond the scope of this community.

  I suggest that you post your question in the Forums on Technet Lync.

  https://social.technet.Microsoft.com/forums/Lync/en-us/home?category=Lync

  See you soon.

• Lync 2010 won't download - error says that it requires Windows 7

  Lync 2010 won't download - error says that it requires Windows 7 BUT I HAVE WINDOWS 7!

  Very frustrating. After the use of Lync 2010 for the last year, he made a self-introduction to date and in a first, told time that a file was missing. So I uninstalled and reinstalled and now I am told that "only windows XP3, Windows Vista and Windows 7 are supported. Please update your PC"but I don't have Windows 7.

  Yes I know it's old. My new PC is sitting here waiting for me to move, but that cannot be done for another month or two that I need to more memory in it. In the meantime, I need to get my Lync 2010 works again.

  Any help is greatly appreciated!

  Hello Susie,

  Thank you for your response.

  I hope you've got the resolution of the question in the forums of Lync.

  However, if the problem persists, I suggest you to try the steps in this article and the Coachman.
  Reference:
  The Lync 2010 installation did not finish using Windows Installer (MSI)
  http://Support2.Microsoft.com/kb/2477965

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Thank you