How do microsoft lync 2010 live on the public ip address?

Similar Questions

• With the help of MicroSoft Lync 2010

  I am currently using MicroSoft Lync 2010 and when I send an invitaiton to someone I can share my screen, but when I try to make him the presenter it does not work? all ideas

  Hello

  These Forums, the community of Microsoft (formerly responses).
  does not specifically support Lync.

  You should also check in the Lync Forums:

  Lync - Forums
  http://Lync.Microsoft.com/en-us/communities/pages/communities.aspx?title=forums

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Microsoft Lync 2010: When you add users to the Conference for the first time without having to type anything, the chat window is grayed out.

  Hello

  Microsoft Lync 2010: When you add / invite users to the Conference for the first time without having to type in the chat window, the chat window is grayed out. I am not able to type anything in the chat window to continue the Conference.

  Thank you
  Rajeev G C

  Phone: 9886540640

  Hello Rajiv Iyer,

  There is a forum for questions about Microsoft Lync 2010.
  Click here for a link to repost your questions in forums Microsoft Lync.

  Thank you

  Marilyn

• After updating to release 21.0, I'm more able to join a meeting by using Microsoft Lync 2010 online if Firefox is set as my default browser.

  After updating to release 21.0, I'm more able to join a meeting by using Microsoft Lync 2010 online if Firefox is set as my default browser. I am invited to "Join the meeting using your web browser" or "download and install Lync participating." None of these options work. Join using web browser results in a command prompt to install missing plugins, but then no appropriate plugins can be found. Try to install Lync Attendee fails because Lync 2010 is already installed.

  I also tried to install the beta version of Firefox 22.0, but the problem persists.

  Hello ScottRey, please try this: enter about: config in the firefox address bar (confirm the message information where it appears) and search for the preference named plugins.load_appdir_plugins. Double-click it and change its value to true (a restart of the browser may be needed later for the change to take effect). some information on the issue are explained in http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/

• How can I hold the public IP address on a specific profile on the asa 5510

  Hi guys

  How can I hold the public IP address on my session NAT VPN cisco customer for no one else can use it? I have a cisco ASA 5510

  the Interior is 172.10.20.86

  public 166.245.192.90

  Need to call my ISP?

  Thank you

  Sorry to say but your qustion is not very clear. Can you please post what you are trying to achieve?

  Thank you

  Ajay

• Is it posible to the public ip address of the default locking?

  Is it posible to block the public IP address by default on multiWAN routers?

  I have several RV016 with up to 4 30Mbps Internet VDSL lines each and using the latest firmware to load 50-200 customer balance.

  When it is used for navigation, some sites will have to lock public source IP of the customer (especially sites that requires a user authentication).

  From a server point of view, public IP address will be between public IPs provided by ISP, automatic suite 4 round robin load balancing strategy.

  As public IP, read by the server changed server reduced session, users will need to enter username and password again to connect.

  Is it posible to lock this public IP for awhile to idle? (he has been featured on my old router BeWAN LX400H as "timer LockSource IP")

  ebarriera,

  The RV016 has no functionality like timer LockSource IP unfortunately. It's a common problem with load in the Cisco Small Business routers and key balancing mainly "secure them" traffic like HTTPS and RDP. I would test balance HTTP traffic and link HTTPS traffic to a WAN port and see if you get decent results.

  -Marty

• Configure my VCSC with VCSe on the public IP address

  Hi guys,.

  I have a session of control VCS under my company Private IP and I my client on public IP VCSe.

  It will be possible to configure my VCSC with the VCSe after the configuration of the areas?

  The ports must be opened by my team of firewall in this scenario?

  Anything else I need to keep in mind.

  For the record, it is only for the objective test.

  You will appreciate any response.

  Thank you

  Saurabh

  > Then, practically there is no as such risk, and my client can use the public IP address on VCSe

  > without going to double network Option key. (which is used to secure more VCSe).

  Cisco highly recommend VCS-E deploy under the DMZ but it's true, too, many customers deploy VCS - E on public network directly.

  Please visit https://supportforums.cisco.com/thread/2154738?tstart=150 for more information security VCS.

  Next version of the plan to be supported VCS X7.2 software build - in the characteristic basic firewall, which allows configuration to allow/deny list based on the IP / port / protocol which should contribute to better security level or even VCS-E deployment on the public network directly.

  > So, I'll ask my client just buy a public IP address, that's all, and we are ready to go?

  A public IP will demand on VCS Expressway, VCS control can be use the NAT address glow (IE share internet access of the network of offices).

  You must also SRV DNS management (if small deployment probably better to use the external DNS service, there are a lot of company provide a service the two service also responsible DNS hosting and as free service).

• Microsoft Office 2010 purchased with the new computer

  Hello

  I bought a new Dell XPS 8500 with Microsoft Office 2010 Home and Business computer. The packing list with the computer shows two elements in the delivery: 225-4158 XPS 8500 Fast track config38 and 421-8669 Microsoft Office Home and Business Kit, SW, OFCHB-2010, MPI, ENG, DAO.

  I looked everywhere in the box of the computer delivered to and I can't find the Microft home kit and the office and I can't activate the office without the MPI card.

  I received this order 24/01/2013 and the box was intact and still sealed with security tape Dell. A kit of office should have been included and MPI?

  Thak you for your help.

  I looked back through the box and I finally found the Microsoft Office MPI card. He was completely at the bottom of the box and one of the cardboard flaps. Thans for your help.

• MS word offers the option of Microsoft Word 2010 (2) in the list of the start menu

  Original title: program registration under Start button

  Today, when I was looking for a program that is displayed when I select the Start button, I noticed that the number 2 see the next to registration for Microsoft Word 2010.  It looks now like this: Microsoft Word 2010 (2)

  I don't think it was like that the other day when I finally used Word.  Any ideas on why it would start that looks like this?  I made no changes to my computer.

  I use Microsoft 7 Home Premium.

  Thanks in advance.

  Hey Debba,.

  -You have two entries in the start menu for Microsoft Word? One is Microsoft Windows Word 2010 (2) and the other is Microsoft Word 2010 Microsoft Office on the start menu?

  -Is this Microsoft Word 2010 (2) successfully opened?

  -This happens to you with other programs in the list?

  If there are two icons for Microsoft Word 2010 on the Start menu, remove the icon of Windows of Microsoft Word 2010 (2).

  All you have to do is click on Microsoft Word 2010 (2) and click on remove from this list.

  This seems to be only a Microsoft Word 2010 shortcut added to the list of the start menu.

  Hope this information helps. If you have any questions, please let us know.

• How to access SPA3102 configure page if the gateway IP address is not visible?

  Hi, in the middle of my adapter troubleshooting, we lost the address to the configuration page (empty by default gateway shows).

  Here's what I see on my online status:

  Address type: automatic private address

  IP address: 169.254.150.92

  Subnet: 255.255.0.0

  Default gateway:

  any ideas how I can access the map settings to address this problem?

  Hello

  the automatic IP address is auto-assignée IP who thought the Windows o/s.

  So you must first of ALL try to 'fix' the adapter under windows while the SPA is connected, your computer is wired for plug LAN and SPA is started... If the adapter will get the IP address of the DHCP server, you have won.

  Second, if this does not help, you can use IVR of SPA to read the addrresses WAN and LAN IP and then you must configure your card of lan of computer to "similar" IP manually - for example if the LAN IP of the SPA must read 192.168.1.1, you should set your computer 192.168.1.2, netmask 255.255.255.0 IP and access the 192.168.1.1.

  Third, if even that are not present, you can IRV SPA - 3102 allows to perform the default adapter factory reset and then follow the manual on IP addresses and connections.

• The IP address private VC directly to the public IP address

  Hello

  I'm a bit puzzled as to why a specific call, I saw worked for a couple of guests and wonder if there was no change in the situation in the H.323 protocol that allows a form any NAT crossing built natively into the codec without involving and external gateway function.

  the reason I ask is the following

  I got a call from a customer with a codec on a private no routable IP to my system that is located on a public IP address, the client had no details of NAT configuration in the endpoint and was able to call my system directly without issue by calling directly to my public IP address.

  historically now if I had a system on a private IP address was sitting behind a NAT, I expect that the public system IP would see no routable IP address of the H.225 message and try to answer the private IP RTP media that would not go through, it does not seem to occur.

  the call that I have lived seemed ends without problem, media flowed in both directions.

  My endpoint is a Cisco edge 85 on the version of the firmware F9.x

  the other codec parts is an 85 edge on the version of the firmware F9.x

  My codec is on a public IP address that is completely open to the H.323 ports

  the other codec parts is on a private IP address.

  while I can't call the other party, the other party may call for me, and I wonder how it worked, taking into account the fact that there is no gateway service aware H.323 in the call, either a VCS or aware firewall H.323.

  Experience, firewalls and other gateways outside of Cisco, Tandberg, Polycom, have struggled to deal with the new H.323 version, again this is why I'm puzzled as to why the call worked.

  I did a bit of reading on the new version of H.323 and noticed the option multiplex logical channel, however on a call where I saw this apparently works again of a life-size codec for a Codian MCU 4505 shows no sign of this logical channel multiplex, unless that is named differently in the newspapers that the ITU document calls the function.

  greatly appreciated all all all the answers, I don't understand exactly how the firewall impact VC calls.

  Thinking with portals

  The MXP has NAT builtin functions. Please take a look at the guide admin 9.x:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/MXP-series/F9/administration_guide/mxp_series_administrator_guide_f90_excl-full-menu-structure.PDF

  The description of the NAT setting is on page 77.

  EX series admin guide http://www.cisco.com/en/US/docs/telepresence/endpoint/ex-series/tc6/administration_guide/ex-series-administrator-guide-tc62.pdf has the same details on page 63.

• EBS 12i on Cloud server with the public IP address but no DMZ

  Hello

  I installed Oracle EBS in a server (such as AWS EC2) cloud with a public IP address. I'm simply looking for personal learning and knowledge about security risks. As there is no given production safety is not serious at this point.

  Also, I don't mean to enter the configurations of the DMZ at the moment.

  I am able to access APPS internally under the server on port 8000 with URL http://<server:8000>/OA_HTML/AppsLogin. but I'm unable to access the URL above on internet.

  
  

  The environment is EBS 12.2.0 on Oracle Linux 5.11.
  

  
  

  I tried the options following, but so far without success.

  1. I tried to completely disable the Linux and SELinux firewall on the server. I have also authorized above URL in my personal office. So the 8000 port is not blocked anywhere.

  2, I followed this note to try to set it up on port 80, but still without success-> configuration Oracle E-Business Suite Release 12 on Amazon Cloud Infrastructure (Doc ID 1205963.1). But you should know that mine isn't on AWS EC2 but similar model.

  So simple question is how can I access front-end EBS on internet (DMZ) using port 8000? I do need to update httpd.conf of EBS Webtier (besides point 2 above)?

  Any help will be greatly appreciated. Thank you.

  See you soon!

  Gray

  Hello

  I discovered that I was using the CDN was blocking port 8000. So when I bypassed the CDN, then I could manage to access the URL with the port 8000.

  Thanks a lot for your help on this one.

  Concerning

  Gray

• Configure the router WRT54G with the PUBLIC IP address and use the DHCP protocol for internal computers

  Hello

  I have a service online Internet with 5 public IP addresses.

  The router and the AP are connected to a switch.

  I would like to set up a WRT54G Router with a public IP address and use DHCP (with private ip address) for the computers that will connect to the AP.

  That the AP is connected to the switch, it is possible that the other wired computers that are connected to the same switch can get an IP from the DHCP?

  Thanks in advance

  In this case, the routing is automatic.

  WRT54G configuration:

  WAN:

  Internet connection: static IP address

  IP address: 180.X. X 170

  Subnet mask: 255.255.255.248

  Gateway: 180.x.x.x (Ex: 180.x.x.1)

  DNS: servers your ISP DNS

  LAN:

  The IP address of the router: 10.10.10.1

  DHCP range: 10.10.10.100 of-online 10.10.10.200

• EX90 two autonomous with the public IP address can make video calls among them self on the Internet or not?

  Dear expert;

  I am very new to VCS and TP Cisco.

  We implement now presence Cisco TV with VCS - C, VCS-E TMS, TCS, MCUS and endpoints with Jabber in a single edit.

  and in another configuration CUCM 10.5, UCCX 10.5 IM & P, Jabber with some 10 officers.

  Now the question is in our building on the 2nd floor we have an EX90 and on the 5th floor an EX90 and on local network, we can make video calls using the IP address.

  In the same way is it possible to make a video call between 2 devices EX90 (both have public IP) present in a location different in the same city on the Internet without the participation of VCS - C and VCS-E.

  It's the client request :)

  Concerning

  Paiva

  Yes, but leaving these systems outside in nature with public IP addresses, leaving you are vulnerable to a number of questions. See for example http://www.videonationsltd.co.uk/2014/11/h-323-cisco-spam-calls/

  https://supportforums.Cisco.com/discussion/12336591/sourceh323idcisco-incomingcalls

  https://supportforums.Cisco.com/discussion/12340591/nuisance-h323-calls-SX20

  The offers above with H.323 calls, in addition to this, you will encounter similar problems using SIP where the systems will be analyzed by tools such as SIPVicious

  /Jens

  Please note the answers and mark questions as "answered" as appropriate

• internal web server access to the content of the network using the public ip address

  Hi, I saw similar topics, but not a clear answer about it. I have a PIX 515e with two interfaces, a web server internal (ip 192.168.0.5) and internal users want to access the server by its (99.99.99.9) ie public ip address is not using DNS. Tried the command alias ' alias (inside) 99.99.99.9 192.168.0.5 "but does not work for http. I can access the server on the local network using the public address for smtp, pop3 and ftp with or without command alias, but not the http service. Any idea?

  a few quick comments.

  a function of the command "alias" is to force the pix to manipulate the dns response. However, you mentioned that you didn't use dns.

  'alias' command will also force the pix to send traffic to 192.168.0.5 when it receives a packet from the inside and intended to be 99.99.99.9. However, since the host and the server are located in the same segment, i.e. pix must re - route the packet to the inside interface, and this operation is not supported with pix v6.x.

  In addition, you mentioned the inside host can access the smtp, pop3 and ftp using 99.99.99.9. This is interesting because the host of 192.168.0.0 would not directly have access to the host of 99.99.99.x without router.