Presentation services starts not... can connect to EM, Weblogic

Similar Questions

• SSO Presentation Services does not start

  Hi all
  
  I'm currently implementing SSO in the windows environment. I followed the stets as provided in the deployment guide.
  
  1. create the Replicator user: success
  2. credentials look-alike user was added to the credential store: success
  3 configured Oracle BI Presentation Services to identify the store of credentials: success
  4 but when I configure the instanceconfig.xml file to run in a SINGLE authentication mode, presentation Services does not start.
  
  This is the code that was added to the instanceconfig.xml < ServerInstance > article
  
  < Auth >
  < SSO enabled = "true" >
  < ParamList >
  < Param name = 'seem the IDENTITY '.
  source = "serverVariable.
  nameInSource = "REMOTE_USER" / >
  < / ParamList >
  < / SSO >
  < / Auth >
  
  Please note this point 3 i.e. adding credentials to the instanceconfig.xml file presentation services is restartnig.it, it's only when I add to the foregoing code it fails.
  
  The system error I get is
  "The Oracle BI Presentation Server service stopped with error 4294967295 (0xFFFFFFFF) special service."
  
  Kind regards
  Bla

  The problem has been resolved. I tried different combinations to copy paste and several reboots of the Referral Services to make it work.

  Can I get my points now? :-)

  Again my understanding is that after you have configured the details below, I should be able to bypass the authentication process (OBIEE login screen) and see the
  Dashboard directly when I switch on the connection URL. But in my case it is not the case because I put the credentials once again.
  Is there anything else I need to configure. Just trying to make single sign with Windows so when the user logs on to Windows desktop
  and passes the URL to see the OBIEE dashboards.

  Your understanding is wrong, but I suggest that to start a new thread as this if a different issue that is completely different from that described in this thread.

• Oracle BI 11.1.1.7 presentation service starts do not

  Hello world

  We have installed just BI 11.1.1.7 on RHEL 6.3 64-bit

  the presentation service does not start

  Here are the contents of the sawlog0.log file

  the error occurred with the command opnmctl startall

  [2015 02-10 T 17: 15:17.000 - 00:00] [OBIPS] [ERROR: 10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid:] [tid:] Odbc driver returned an error (SQLDriverConnectW).

  State: HY000.  Code: 10058.  [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred.

  [nQSError: 73006] Impossible to get from the main Cluster controller (SRV39 - DG.mydomain) or secondary (Cluster controller) specified for the DSN Oracle BI server cluster. (HY000) [[

  Leader: odbcuserpoploaderimpl.cpp

  Online: 329

  Geographical area:

  Saw.Security.odbcuserpopulationimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  ECID:

  ]]

  [2015 02-10 T 17: 15:17.000 - 00:00] [OBIPS] [ERROR: 16] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid:] [tid:] cannot create a user to BI Server connection when you start. Try again. [[

  Leader: odbcuserpoploaderimpl.cpp

  Line: 330

  Geographical area:

  Saw.Security.odbcuserpopulationimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  ECID:

  ]]

  [2015 02-10 T 17: 15:22.000 - 00:00] [OBIPS] [ERROR: 31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid:] [tid:] could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again. [[

  Leader: odbcuserpoploaderimpl.cpp

  Online: 347

  Geographical area:

  Saw.Security.odbcuserpopulationimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  ECID:

  ]]

  [2015 02-10 T 17: 15:22.000 - 00:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services are shut down. [[

  Leader: sawserver.cpp

  Line: 713

  Geographical area:

  Saw.sawserver

  ECID:

  Database server:

  Oracle database: 11.2.0.1 64-bit

  6.3 64-BIT RHEL

  Application server

  Client Oracle 11.2 64 bit

  6.3 64-BIT RHEL

  We need urgent assistance

  Thanks in advance

  We have solved the problem

  Disc 5 (V37451 - 01.zip) has been altered

  We redownloaded it and this medication works now

  I recommend to unpack t to check all your files before starting the installation.

• Presentation service is not started get: already started process: instance1 ~ coreapplication_obis1 ~ OracleBIServerComponent ~ coreapplication_obis1 message

  Hello

  My network admin has restarted the server abnormally and stop internet access from the system, where I installed OBIA 11 g. After that I started my BI services but now my presentation service will not LIVING. all services are started except service presentation:

  Following error message;

  Process pending: instance1

  ---------------------------------+--------------------+---------+---------

  IAS-component | process type.     The NEST | status

  ---------------------------------+--------------------+---------+---------

  coreapplication_obips1 | OracleBIPresentat ~ |     N/A | Down

  essbasestudio1 | EssbaseStudio |    4328 | Alive

  essbaseserver1 | Essbase |    4456. Alive

  coreapplication_obiccs1 | OracleBIClusterCo ~ |    4300 | Alive

  coreapplication_obisch1 | OracleBIScheduler ~ |    4292 | Alive

  coreapplication_obijh1 | OracleBIJavaHostC ~ |    4316. Alive

  coreapplication_obis1 | OracleBIServerCom ~ |    4308. Alive

  If I'm trying to start the service manually by using following command then, also, it is not started. I entered after a command:

  D:\Middleware\instances\instance1\bin > opmnctl startproc ias-component = coreapplication_obis1

  Now I get after message.if I try the same command again

  D:\Middleware\instances\instance1\bin > opmnctl startproc ias-component = coreapplication_obis1

  opmnctl startproc: from opmn managed the process...

  ================================================================================

  opmn id = ACLBS05:9501

  0 out of 0 process started.

  Already started process: instance1 ~ coreapplication_obis1 ~ OracleBIServerComponent ~ coreapplication_obis1

  I don't get if the process are already so why my presentation service is not started.

  Please, help me to my presentation service.

  Thank you

  Looks like your catalog is damaged. See this

  [2015 08-13 T 04: 57:23.000 - 07:00] [OBIPS] [ERROR: 1] [,] [saw.catalog.impl.read] [ecid:] [tid:] invalid element \\?\D:\Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\OracleBIApps\root\system\mktgcache\sawguidstate.atr. [[

  Leader: catalogimpl.cpp

  Online: 968

  Geographical area:

  Saw.Catalog.impl.Read

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ECID:

  ]]

  [2015 08-13 T 04: 57:23.000 - 07:00] [OBIPS] [WARNING: 1] [,] [saw.catalog.impl.read] [ecid:] [tid:] error loading \\?\D:\Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\OracleBIApps\root\system\mktgcache\sawguidstate.atr []

  Leader: catalogimpl.cpp

  Online: 989

  Geographical area:

  Saw.Catalog.impl.Read

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Then try to copy these files to some other working environment

• Presentation services do not come to the top

  Hello
  the local server on my machine works fine, all suddenly it has stopped working. The MA is running but OBIPS does not come to the top. Here's the log of errors for services closely. any help is very appreciated.
  
  
  [2012 07-15 T 09: 07:33.000 - 04:00] [OBIPS] [ERROR: 1] [,] [saw.catalog.impl.read] [ecid:] [tid:] invalid element \\?\C:\OBIEE\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\SampleAppLite\root\system\mktgcache\ldn5151trange\sawguidstate.atr. [[
  Leader: catalogimpl.cpp
  Online: 842
  Geographical area:
  Saw.Catalog.impl.Read
  Saw.Catalog.impl.Scour
  saw.sqlNodeCacheMgr.loadCatalog
  Saw.webextensionbase.init
  Saw.sawserver
  Saw.sawserver.initializesawserver
  Saw.sawserver
  ECID:
  ]]
  [2012 07-15 T 09: 07:33.000 - 04:00] [OBIPS] [WARNING: 1] [,] [saw.catalog.impl.read] [ecid:] [tid:] error loading \\?\C:\OBIEE\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\SampleAppLite\root\system\mktgcache\ldn5151trange\sawguidstate.atr []
  Leader: catalogimpl.cpp
  Online: 862
  Geographical area:
  Saw.Catalog.impl.Read
  Saw.Catalog.impl.Scour
  saw.sqlNodeCacheMgr.loadCatalog
  Saw.webextensionbase.init
  Saw.sawserver
  Saw.sawserver.initializesawserver
  Saw.sawserver
  ECID:
  ]]
  [2012 07-15 T 09: 07:33.000 - 04:00] [OBIPS] [INCIDENT_ERROR:1] [] [saw.webextensionbase.init] [ecid:] [tid:] / system/mktgcache/LDN5151TRANGE/sawguidstate of the invalid element. [[
  Leader: catalogimpl.cpp
  Online: 660
  Geographical area:
  Saw.webextensionbase.init
  Saw.sawserver
  Saw.sawserver.initializesawserver
  Saw.sawserver
  ECID:
  ]]
  [2012 07-15 T 09: 07:36.000 - 04:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services are shut down. [[
  Leader: sawserver.cpp
  Online: 712
  Geographical area:
  Saw.sawserver
  Saw.sawserver.terminatesawserver
  Saw.sawserver
  ECID:

  Can you try these steps and see how it works for you.
  (1) take a backup of the catalog
  (2) copy the files sawguidstate and sawguidstate.atr a different folder in the folder
  C:\OBIEE\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\SampleAppLite\root\system\mktgcache\ldn5151trange
  (3) start OBIPS
  Let me know updates.

  Just in case allows, please mark appropriate or useful

• Essbase service starts not (planning 11.1.2.3.501)

  Work with Planning version: 11.1.2.3.501

  This morning we received the following error message in planning when you open a form:

  "Unable to get a connection for Hyperion Essbase. If the problem persists, please contact your administrator. "

  For our UAT environment, it was enough to just stop and start services. For our production environment, all the services seem to be start correctly, but when I try to connect to Essbase through the administrative console I get the following error:

  Error [10061] network: could not connect to [BXTS131040.eu.rabonet.com:1423]

  When I run diagnostics I get the following error (see attachment):

  Validate the connection to the server Essbase to BXTS131040.eu.rabonet.com

  Error: Could not connect to the olap service. Unable to connect to the server of Essbase to 'BXTS131040.eu.rabonet.com:1423 '. Error network [10061]: unable to connect to [BXTS131040.eu.rabonet.com:1423]

  Recommended action: check Essbase server is started.

  The startup log does not say much either. Watch only a different way of exploitation forest (UNKNOWN?) and THREADS is [1 num] rather than [issue 4]. I don't know where to look for this "UNKNOWN" part in the log... see below:

  Successful start (previous):

  departure:

  (7 June 2015 09.45.06 PM) DISCUSSIONS [issue 4] used (s)

  (7 June 2015 09.45.11 PM) Col [T = 2] [000 min 05 sec] from EisServer

  (7 June 2015 09.45.11 PM) Pass [T = 3] [000 min 05 sec] startup Essbase

  (7 June 2015 09.45.12 PM) Col [T = 2] [000 min 00 sec] from EssbaseStudio

  (7 June 2015 09.45.18 PM) Col [T = 2] [000 min 05 sec] from SST

  (7 June 2015 09.47.01 PM) Col [T = 4] [001 min 53 sec] from EssbaseAdminServices

  (7 June 2015 09.47.01 PM) Col [T = 1] [001 min 53 sec] from AnalyticProviderServices

  (7 June 2015 09.47.02 PM) Col [T = 1] [000 min 00 sec] from RMI

  (7 June 2015 09.47.27 PM) Pass [T = 2] [002 min 05 sec] from planning

  (7 June 2015 09.47.31 PM) Pass the borrowing of departure [T = 3] [002 min 17 sec]

  (7 June 2015 09.47.38 PM) Col [T = 1] [000 min 27 sec] from RaFrameworkAgent

  (7 June 2015 09.49.10 PM) Col [T = 4] [002 min 05 sec] from RaFramework

  (7 June 2015 09.49.12 PM) To the Total [T = 4] [004 min 06 sec]

  Departure from unsuccessful (now):

  departure:
  (June 29, 2015 03.02.59 PM) DISCUSSIONS [1 num] used (s)
  [start] Com.oracle.hit.logging.EPMLogger June 29, 2015 error 15:02:59
  [start] GRAVE: Could not start the service: OracleProcessManager_EPM_epmsystem2
  (June 29, 2015 03.02.59 PM) Pass [T = 1] [unknown] startup Essbase
  (June 29, 2015 03.03.00 PM) To the Total [T = 1] [000 min 01 sec]

  BUILD SUCCESSFULLY
  Total time: 2 seconds

  When I try to run Essbase via startEssbase.bat, I get the following message (even if no Essbase.exe is visible in the Task Manager):

  departure:
  (June 29, 2015 04.48.14 PM) DISCUSSIONS [1 num] used (s)
  (June 29, 2015 04.48.14 PM) Pass [T = 1] [000 min 00 sec] startup Essbase (already done)
  (June 29, 2015 04.48.15 PM) To the Total [T = 1] [000 min 01 sec]

  BUILD SUCCESSFULLY
  Total time: 2 seconds

  Hi John,.

  Thanks for the tip.

  The problem has been resolved by restarting the server... Essbase starts again. But I need to know why it happened... so I did some research... discovered all the problems started 27-06 at 00:43

  
  

  The OPMN.log shows this error since Friday night [2015-06 - 27 T 21: 00:43 + 02:00]:

  [2015 06-27 T 21: 00:43 + 02:00] [opmn] [TRACK: 1] [536] result [pm-workers] Job 0 242: []

  EPM_epmsystem2 ~ Essbase1 ~ EssbaseAgent ~ OFFICER ~ 467543836:6128

  Status: alive

  Operation: internal (success)

  ErrFile: D:\Oracle\Middleware\user_projects\epmsystem2\diagnostics\logs\OPMN\opmn\console~Essbase1~EssbaseAgent~AGENT~1.log

  Chain: Essbase ping utility has generated an error.  See his diary.

  This message keeps going until Monday: I tried manually stop and start all services via D:\Oracle\Middleware\user_projects\epmsystem2\bin\stop.bat and start.bat

  Then, the newspaper showed this error:

  [2015 06-29 T 10: 30:03 + 02:00] [opmn] [TRACK: 1] [536] [pm-workers] job 0 0 results: []
  EPM_epmsystem2 ~ Essbase1 ~ EssbaseAgent ~ OFFICER ~ 467543836:6128
  Status: stop
  Operation: internal (expire while you wait for a managed process stop)
  ErrFile: D:\Oracle\Middleware\user_projects\epmsystem2\diagnostics\logs\OPMN\opmn\console~Essbase1~EssbaseAgent~AGENT~1.log
  Chain: second stop attempted

  ]]
  [2015 06-29 T 10: 30:03 + 02:00] [opmn] [NOTIFICATION: 1] process to stop [pm-process] [663]: Essbase1 ~ EssbaseAgent ~ OFFICER ~ 1 (467543836:6128)
  [2015 06-29 T 10: 31:03 + 02:00] [opmn] [TRACK: 1] [536] result [pm-workers] Job 0 245: []
  No address for the request

  ]]
  [2015 06-29 T 10: 40:04 + 02:00] [opmn] [NOTIFICATION: 1] process to stop [pm-process] [663]: Essbase1 ~ EssbaseAgent ~ OFFICER ~ 1 (467543836:6128)
  [2015 06-29 T 10: 40:04 + 02:00] [opmn] [ERROR: 1] [[libopmness]] with strength of the termination process: Essbase1 ~ EssbaseAgent ~ OFFICER ~ 1 (467543836:6128)
  [2015 06-29 T 10: 41:04 + 02:00] [opmn] [TRACK: 1] [536] result [pm-workers] Job 0 246: []
  EPM_epmsystem2 ~ Essbase1 ~ EssbaseAgent ~ OFFICER ~ 467543836:6128
  Status: stop
  Operation: internal (too many links)
  ErrFile: D:\Oracle\Middleware\user_projects\epmsystem2\diagnostics\logs\OPMN\opmn\console~Essbase1~EssbaseAgent~AGENT~1.log

  Essbase ping:
  [2015 06-27 T 21: 00:43.735 - 19:00] Initializing request Ping
  PM-PingUtility: the Ping port is not defined
  PM-PingUtility: unable to parse the command line arguments 1003

  EssbaseAgent.log:
  Class 'oracle.core.ojdl.logging.LoggingConfiguration' of the configuration of connection failed
  oracle.core.ojdl.logging.LoggingConfigurationException: ODL-52050: failed to process the file 'D:\Oracle\Middleware\user_projects\epmsystem2\EssbaseServer\essbaseserver1\bin\logging.xml', XML parse exception (line: 58, column: 6): org.xml.sax.SAXParseException: file:/D:/Oracle/Middleware/user_projects/epmsystem2/EssbaseServer/essbaseserver1/bin/logging.xml: XML-20146: unexpected text (errors) in the content of element 'loggers', the forthcoming "[newspaper].
  27 June 2015 20:38:20 com.hyperion.hit.registry.SecurityUtils

• We can connect through embedded weblogic ldap

  Hi all

  We can connect to weblogic incorporated using following code

  < String, String > Hashtable env = new Hashtable < String, String > ();

  env.put (Context.INITIAL_CONTEXT_FACTORY,

  "com.sun.jndi.ldap.LdapCtxFactory");

  env.put (Context.SECURITY_AUTHENTICATION, 'Simple');

  env.put (Context.SECURITY_PRINCIPAL, "CN = admin, CN = Users, DC = ucm_domain");

  env.put (Context.SECURITY_CREDENTIALS, "welcome1");

  env.put (Context.PROVIDER_URL, "ldap://198.168.0.147:7001"); ")

  env.put ("com.sun.jndi.ldap.connect.timeout", "1");

  DirContext ctx = new InitialDirContext (env);

  System.out.println ("connection successful.");

  } catch (NamingException nex) {}

  System.out.println ("connection LDAP: FAILED");

  nex.printStackTrace ();

  Well, you can try to connect using weblogic identity internal store

  	try {}
  	JpsContextFactory ctxFactory = JpsContextFactory.getContextFactory ();
  	JpsContext ctx = ctxFactory.getContext ();
  	LdapIdentityStore idstoreService = (LdapIdentityStore) ctx.getServiceInstance (IdentityStoreService.class);
  	idStore = idstoreService.getIdmStore ();
  	} catch (IdentityStoreException ise) {}
  	Logger.severe ("IdentityStoreException in OCCSpacesUserDataClient. Failed to initialize the objects of static block. ", ise);
  	} catch {} (I JpsException)
  	Logger.severe ("IdentityStoreException in OCCSpacesUserDataClient. Failed to initialize the objects of static block. "(,je);"
  	} It will give all the information of the user. It has different method like searchuser etc.

• SSH and SMB service starts not more

  Dear community,

  After you have installed the Add-it-Analyzer Log my RN10200 started having some problems that I was not able to see the shares via Samba more. I tried to connect via SSH to see what is the problem, but also the SSH no longer works. Since the web-admin panel still works, I tried to enable SMB and SSH in the Panel, but it briefly passes green and gray then again. I also tried to uninstall the add-on, but now get a package manager error. I then tried to reinstall the operating system using the boot option, but that did not help either.

  I removed the hard disks in the unit and their read-only to see what is poorly mounted. There, I found some permissions to be set wrong on the system partition:

  / mnt/systemOld # ls - la
  Total 124
  drwxr-xr-x 26 root root 4096 May 19 21:03.
  drwxr-xr-x 4 root root 4096 24 May 07:04...
  drwxr-xr-x 2 root root 4096 may 5, 2015 apps
  drwxr-xr-x 2 root root 4096 19 May 19:51 bin
  drwxr-xr-x 2 root 4096 17 June 2012 boot root
  drwxrwxrwt 2 root 4096 5 may 2015 given root
  drwxr-xr-x 4 root root 4096 19 May 19:51 dev
  drwxr-xr-x 79 root root 4096 19 May 21:32 etc.
  drwxr-xr-x 6 guest invited 4096 19 May 19:51 frontview
  drwxr-xr-x 2 root 4096 17 June 2012 home root
  lrwxrwxrwx 1 comments 5 houses 18 July 2015-> / home
  drwxr-xr-x 14 Guest invited 4096 19 May 19:51 lib
  drwxrwxrwx 2 Guest invited 16384 5 may 2015 lost + found
  drwxr-xr-x 2 root root 4096 media of 18 November 2012
  drwxr-xr-x 3 root root 4096 mnt 17 June 2012
  drwxr-xr-x 9 root root 4096 Nov 26 10:59 opt
  drwxr-xr-x 2 root root 4096 proc 17 June 2012
  -rwxrwxrwx 1 comments 1024 may 5, 2015 .rnd
  drwx - 5 root root 4096 May 19 19:51 root
  drwxr-xr-x 3 guest invited 4096 19 May 17:52 rsyslog
  drwxr-xr-x 2 root 4096 run of 18 August 2015 root
  drwxr-xr-x 2 4096 invited guest 19 May 19:51 sbin
  drwxr-xr-x 2 root root 4096 selinux 10 June 2012
  drwxr-xr-x 2 4096 comments 18 November 2012 srv
  drwxr-xr-x 2 root root 4096 sys 8 February 2013
  drwxrwxrwt 7 guest invited 4096 19 May 21:32 tmp
  -rwxrwxrwx 1 invited guest 33 19 May 17:48 .update_fail
  drwxr-xr-x 10 root root 4096 Nov 26 10:59 usr
  drwxr-xr-x 18 root root 4096 May 19 19:51 var

  Instead of:

  ls - la /.
  total 120
  drwxr-xr-x 26 root root 4096 23 May 07:40.
  drwxr-xr-x 26 root root 4096 23 May 07:40...
  drwxrwxrwx 1 root root 116 23 May 20:45 apps
  drwxr-xr-x 2 root root 4096 23 May 07:39 bin
  drwxr-xr-x 2 root 4096 17 June 2012 boot root
  drwxr-xr-x 1 root root 250 given may 22, 10:36
  drwxr-xr-x 13 root root 3480 23 May 20:53 dev
  drwxr-xr-x 79 root root 4096 23 May 20:46 etc.
  drwxr-xr-x 6 root root 4096 23 May 07:39 frontview
  drwxr-xr-x 1 admin admin 0 19 May 22:17 home
  drwxr-xr-x 14 root root 4096 23 May 07:39 lib
  drwx - 2 root root 16384 19 May 22:17 lost + found
  drwxr-xr-x 2 root root 4096 19 May 22:49 md124
  drwxr-xr-x 4 root root 80 May 23 20:53 media
  drwxr-xr-x 4 root root 4096 24 May 07:04 mnt
  drwxr-xr-x 9 root root 4096 May 13 16:48 opt
  root of Dr-xr-xr-x 188 root 0 1 January 1970 proc
  -rw - 1 root root 1024 19 May 22:17 .rnd
  drwx - 3 root root 4096 23 May 07:39 root
  drwxrwxr-x 26 root admin 820 run 23 May 20:53
  drwxr-xr-x 2 root root 4096 23 May 07:39 sbin
  drwxr-xr-x 2 root root 4096 selinux 10 June 2012
  drwxr-xr-x 2 root root 4096 srv 18 November 2012
  Dr-xr-xr-x 11 root root 0 may 24 07:05 sys
  drwxrwxrwt 7 root root 4096 24 May 07:17 tmp
  -rw - r - r - 1 root root 0 23 May 07:38 .update_success
  drwxr-xr-x 10 root root 4096 13 May 16:48 usr
  drwxr-xr-x 17 root root 4096 23 May 07:39 var

  could be the cause of the problem? Other ideas how to get SSH and SMB work return service or more diagnostic information?

  I have a backup of everything so a complete reset would be an option. However, I would like to understand the problem and solve it rather by using telnet, as seems to be a simple problem? It would be enough to reset permissions? What else could be causing this behavior?

  Thanks for the tips

  Best

  Steffen

  You will have to go folder by folder and read all the files, he complains and chown the permissions back to root instead of comments. Loïc but eventually you can get everything again.

• OBIEE presentation services do not come on the recreation of the role Application BISystem

  Hi guys,.

  I accidentally deleted BISystem role of Application of Console. But, went through couple of posts and recreated the Application role, and characterized by the BISystemUser to the role.

  In short, I did the procedure below.

  1. stop BI Service

  2. create a role and a member with the user BISystem

  3. Add the policy to the role

  •Oracle.bi.Scheduler.manageJobs

  •Oracle.bi.Server.queryUserPopulation, it not appear in the list you can add it manually using following parameter

  permission class: oracle.security.jps.ResourcePermission

  Resource type: oracle.bi.server.permission

  Name of the resource: oracle.bi.server.queryUserPopulation

  Action: subject

  • oracle.bi.server.impersonateUser, it does not appear in the list you can add it manually using following parameter

  permission class: oracle.security.jps.ResourcePermission

  Resource type: oracle.bi.server.permission

  Name of the resource: oracle.bi.server.impersonateUser

  • oracle.bi.server.manageRepositories

  • EPM_Essbase_Administrator

  4. start the BI Service

  
  

  But I can't launch the presentation BI Services login page.

  I got the bi_server1 error - diagnostic.log below file and it seems that the user BISystemUser is always having a problem of authentication with the server.

  
  

  Please note that I haven't restarted the server. Just restarted the BI Services.

  
  

  [2016 01-27 T 13: 02:53.544 + 04:00] [bi_server1] [WARNING] [] [oracle.j2ee.ws.common.jaxws.JAXWSMessages] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 8b2c6332e32ecb3b:-3907915 c: 1527-c 794733:-8000 - 000000000001717e, 0] [APP: bisecurity #11.1.1] [J2EE_APP.name: bisecurity_11.1.1] [J2EE_MODULE.name: bisecurity] [WEBSERVICE.name: SecurityWebService] [WEBSERVICE_PORT.name: SecurityWebServicePort] Exception during execution of the business logic: SecurityService::checkPermission [OBI-SEC-00060] BISystemUser current user is not authorized to perform the impersonation.

  [2016 01-27 T 13: 03:04.954 + 04:00] [bi_server1] [NOTIFICATION] [] [oracle.bi.security.service] [tid: [ASSETS].] [ExecuteThread: '5' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 8b2c6332e32ecb3b:-3907915 c: 1527-c 794733:-8000 - 000000000001718f, 0] [APP: bisecurity #11.1.1] [J2EE_APP.name: bisecurity_11.1.1] [J2EE_MODULE.name: bisecurity] [WEBSERVICE.name: SecurityWebService] [WEBSERVICE_PORT.name: SecurityWebServicePort] SecurityService::checkPermission [OBI-SEC-00060] BISystemUser current user is not authorized to perform impersonation. [[

  oracle.bi.security.service.UnauthorisedAccessException: SecurityService::checkPermission [OBI-SEC-00060] BISystemUser current user is not authorized to perform the impersonation.

  at oracle.bi.security.service.AbstractSecurityServiceAction.checkPermission(AbstractSecurityServiceAction.java:231)

  at oracle.bi.security.service.AbstractSecurityServiceAction.enforceImpersonateUser(AbstractSecurityServiceAction.java:257)

  at oracle.bi.security.service.GetRunAsUserAction.performAuthorisationChecks(GetRunAsUserAction.java:37)

  at oracle.bi.security.service.AbstractSecurityServiceAction.invoke(AbstractSecurityServiceAction.java:154)

  at oracle.bi.security.service.SecurityServiceBean.getRunAsUserWithLanguageAndProperties(SecurityServiceBean.java:484)

  at sun.reflect.GeneratedMethodAccessor4206.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  Am I missing any step in the process. Also, I checked the steps of two discussions and a few other items.

  Thank you very much

  Prasanna

  Hello

  The problem is resolved after you restart weblogic server.

  Thank you

• When I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not work.

  Separated from this thread.

  I ve acer aspire e1 - 531, now I am having problem about the internet, when I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not" can u tell me how to fix it... Please stp by step... Thank you

  Hello

  Thanks for posting your request.

  I would ask you to follow the steps below and check.

  While you are on the start screen, type cmd. Right click on cmd.exe returned and select 'run as administrator'.

  Once the command prompt window opens, type the following commands and press ENTER after each:

  net localgroup administrators / add networkservice

  net localgroup administrators / add localservice

  Type exit to close the command prompt window, or simply X starting at the top right.

  Restart computer and check if you still receive the message.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Confused about BI Publisher and BI Presentation Services

  Hello
  
  I have read this document: http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e12188/toc.htm
  
  I have already created a user, role, and data sources, to integration with the presentation Services. Now, what is the relationship between the BI Publisher with services presentation BI? So far, I could only connect to the presentation of the Services as administrator. I tried to use "user" I created on BI Publisher to log on as a normal user presentation Services, but it is said that it is not valid. How can I set up a normal user for presentation Services create the report? (if that's the goal of it). What is the diff of the user on presentation of BI and BI Publisher Services? I'm still confused and so far I can not create a report on the responses =) would a person also refer to a document on a setup step by step if I could create a report?
  
  
  Thank you!

  If you use BI_SERVER security, your BEEPER users will be authenticated against the installation of server of BI (RPD), which in itself is a table of data types, LDAP, authentication 4 IE select in the table where

  If you go in Server BI, take care to ensure that your users are in the appropriate groups of the XMLP_XXXX. -See documentation for exact priv given to each group.

  If you use the security of the OPE, you users BEEP etc..

  Offline / online:

  Is offline when usually build you the repository 1st time when ready (overall consistency checks that is spent in the administration tool), you will put the RPD in the folder /Server/repository. Point the NQSConfig.INI to the RPD file and start the BI Server service. OBIEE takes RPD file, load into memory ready for use with BI presentation services. When you connect 'Online', you connect to the RPD in memory (and 'Live' in the service) when you make changes, they are immediately in effect (changes to presentation catalogs usually require a pressure on the "Reload server metadata" responses)
  * When BI services are on the rise, the RPD specified in NQSConfig is locked for editing, if you try and open with the administration tool you will get only the playback mode.

  What repository?
  It's simple: when you connect online, you specify an ODBC connection that you have need to configure in data sources - ODBC type "Oracle BI Server", here you give the IP address / hostname of the BI server and what RPD you want to use, just specify the RPD in the ODBC connection IF you have several RPDS specified in the NQSConfig.INI , otherwise the 'failure' RPD will be selected.

  Does that help? -Maybe that start a new thread for questions, this mark as being closed to help other users of the research.
  See you soon
  Alastair

• How can I get my account? "the user profile service could not connect..." User profile can not be downloaded... »

  I can't access my account... message says: "the user profile service could not connect..."  User profile can not be downloaded... »

  Help, please...

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• My 6to4 network card can not start code 10. How can I fix it? I think he asks me not to connect to the internet

  My computer is an inspiron 1525 Vista Home Basic

  Hello

  The basics of the Internet runs on IPv4.

  03:54 is not necessary unless you click on and link that is configured as IPv6, where the name 03:54 (chahge IPv6 to work on IPv4).

  To turn on/off and set the IPv6 components - http://support.microsoft.com/kb/929852
  -------------
  Generally to evaluate wireless.

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

• After cleaning viruses with Norton software, I lost my Brother printer connection. Message: Printer Spooler Service does not. Can anyone help me to restore

  I lost the connection to the printer or I can add a printer because it - Printer Spooler service does not. Can you have a suggestion or an opinion. Thganks much. Michael

  Right click on 'My computer' / select 'manage '.

  Under "Services and Applications", select 'Services '.

  Check to see if the "Print spooler" service is "started" and "Startup Type" is set to "auto".

  Also check if the 'RPC Remote Procedure Call () service is also "started" and "Startup Type" is set' auto.

  J W Stuart: http://www.pagestart.com