Preserve order within the panelDashboard after a
Hello
I use JDev 11.1.2.4.0
-J' I panelDashboard and in it, I added 4 panelboxs.
-Inside each panelbox, I added < af:componentDragSource / > so that I can reorganize panelboxes inside the panelDashboard and orders ok.
-J' applied MDS application.
Problem is when the user is out of the page and to him once again the order of the panelboxes is reset.
Is there a way to preserve panelbox order within the same panelDashboard if disconnected from the user by the system and the connection again?
Thank you.
This is the message that describes your use case.
http://www.Oracle.com/technetwork/issue-archive/2012/12-may/o32adf-1577987.html
There is also a sample application. Please download and see how adf-config is changed to the pannelDashboard.
Thank you
Tags: Java
Similar Questions
-
I cancelled my CC order within the period of 30 days...
I canceled my original order for 2 licenses within the period of 30 days. Talked to a representative of CC in the live chat. I have the transcript. I was supposed to receive a call of 'specialist cancellation' or whatever you call the. He called. Gave me a virtual machine. I remembered and gave him details VM re: how to reach me. Never heard of him again. Now, I received an invoice for the billing period to May 18. Please help me solve this problem. I don't want to continue, but not with the original order. I want only 1 license.
Hello
According to the information I see support tried to contact you on the e-mail.
I have followed them and solve the problem as soon as possible.
^ Ani
-
Incorrect order in the region after upgrade Apex 4.2.2
We have improved our applications at Apex 4.2.2.00.11 and everything works fine. With the exception of 2 pages. These pages have a parent area (in display point 'Page (1) template body') and two parts of the child, a (seq 10) HTML tag and a region (seq 20) report. But when these pages are executed, the region of report was posted first! I discovered that when I remove the HTML region of its parent, that the original display for this region, HTML has been 'Page (2) template body '. I've changed that to "Page model body (1) ', handed the region HTML to its parent. Now the regiopns appear in the correct order. However when I do an export and import on the production environment, the regions are always displayed in the right order! It seems that during the import, the point of view of a region with a parent area, is ignored.
Any ideas how to solve this problem?
Hello
I think I've identified the cause of your problem. When importing an application we automatically point the value display child parts to 'Page (3) template body', because points of view are not really relevant for regions of the child, but we need for the good sort. Due to a bug, this is not done for regions of type 'Report' and 'calendar '.
As a solution, can you please assign 'Page (3) template body' to your sub regions and try again. I will file a bug for the issue.
Concerning
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf
-
What order are the nodes synchronized within the same NodeCollection?
Basically, is it a guarantee of the order of synchronization within a NodeCollection? I guess that there is and that it is based on the order in which the nodes were created. For example, in the SimpleChatModel the node creation order is:
HISTORY_NODE_EVERYONE
HISTORY_NODE_PARTICIPANTS
HISTORY_NODE_HOSTS
TYPING_NODE_NAME
During the synchronization of will I receive all messages in HISTORY_NODE_EVERYONE before receiving * ANY * messages for HISTORY_NODE_PARTICIPANTS? HISTORY_NODE_PARTICIPANTS all messages sent before HISTORY_NODE_HOSTS sends its messages? When I say "sent" I'm not as well what is the actual network traffic (I don't like on the order of actual arrival package, it's your job CAA developers ), that I really care to know if ItemRecieve for HISTORY_NODE_PARTICIPANTS can get executed while HISTORY_NODE_EVERYONE continues to receive messages?
Why cross the next level in the hierarchy of the NodeCollection level takes a NodeCollection to be fully synchronized before another NodeCollection (called subscribe after the first) can retrieve messages from ItemRecieve? If NodeCollection agreed before NodeCollection B is a guarantee to get synced before B? At end synchronization before B gets his first message?
I started having a problem where I have to make sure that some knots are synchronized before I begin to receive messages to other nodes. I of course can I check dependencies on reception and simply to postpone the execution until the dependency is sync'd, but this will create a lot more code points of failure that I really wanted to. I expected an easier way to do it.
VES
Hello
To begin to answer, its recommended that the collection that node is fully synchronized i.e. synchronization change event was pulled on it before you update your template or change anything in the user interface. We have built complex applications of this practice. So, I'm not sure of a use case where you can not do the update after your collectionNode synchronized and update the model and the view that collectionNode.isynschronized is true.
This will avoid any dependency data between nodes in a node in the collection.
Similarly, if the data between two nodes from the collection are dependent on each other, you can do them under a collectionNode.
And finally, we are not going for a specific order.
I hope this helps.
But please let us know the use for your case.
Thank you
Hironmay Basu
-
Yesterday I placed an order through Slim.nl. Order 850362-, costs €120,-- After that, by mistake, I filled in all the details of my Visa for future updates. Later, I realized I shouldn't have done that. How do I cancel this shoulkd process?
Slim, they advised me to contact you. Await your response.
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==>==> NOTE DAYS AND TIMECreative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html -
After you have imported into Muse, clicking on links load new page within the animation
I created an animation (cursor functionality with button) and placed a link on the button to go to another page via the "_self" tag at the end after the url tag.
Once I import into Muse, and then publish... I clicked on one of the buttons with a url link to it which should replace the current page with a new page... but it loads the new page as part of the animation! A slap.
Is this a bug? Here's a live link and click on the button in the animation of cursor 'BUY THIS THEME' and you'll see what I mean.
Or I do something wrong?
Use rather _top as the target url.
Darrell
-
I go the iphone7 order + 19/9
and he said: it will be delivery between 11/10-17/10
but the State of the process is still in its housing on part of treatment about two weeks
they will be actually delivered between the date or not?
They should be. Mine was stuck in the treatment of a week and a half, and shipping and final delivery arrived within 5 days after that State passed preparing to ship.
-
AnyConnect to ASA 5505 ver 8.4 unable to ping/access within the network
My AnyConnect VPN to connect to the ASA, but I can not access my home network hosts (tried Split Tunnel and it didn't work either). I intend to use a Split Tunnel configuration, but I thought I would get this job until I've set up this configuration. My inside hosts are on a 10.0.1.0/24 network and networks 10.1.0.0/16. My AnyConnect hosts use 192.168.60.0/24 addresses.
I saw the messages of others who seem similar, but none of these solutions have worked for me. I also tried several configurations NAT and ACLs to allow my internal network to the ANYConnect hosts and return traffic shaping, but apparently I did it incorrectly. I undestand what this worm 8.4 is supposed to be easier to achieve, NAT and others, but I now have in the IOS router it is much simpler.
My setup is included below.
Thanks in advance for your help.
Jerry
*************************************************************
ASA Version 8.4 (4)
!
hostname mxfw
domain moxiefl.com
activate the (deleted) password
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
switchport trunk allowed vlan 20.22
switchport mode trunk
!
interface Ethernet0/6
Shutdown
!
interface Ethernet0/7
Shutdown
!
interface Vlan1
nameif inside
security-level 100
IP 10.0.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan20
nameif dmz
security-level 50
IP 172.26.20.1 255.255.255.0
!
interface Vlan22
nameif dmz2
security-level 50
IP 172.26.22.1 255.255.255.0
!
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
name-server 208.67.222.222
Server name 208.67.220.220
domain moxiefl.com
permit same-security-traffic inter-interface
network of the Generic_All_Network object
subnet 0.0.0.0 0.0.0.0
network of the INSIDE_Hosts object
10.1.0.0 subnet 255.255.0.0
network of the AnyConnect_Hosts object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_26 object
255.255.255.192 subnet 192.168.60.0
network of the DMZ_Network object
172.26.20.0 subnet 255.255.255.0
network of the DMZ2_Network object
172.26.22.0 subnet 255.255.255.0
pager lines 24
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
dmz2 MTU 1500
local pool VPN_POOL 192.168.60.20 - 192.168.60.40 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT dynamic interface of Generic_All_Network source (indoor, outdoor)
NAT (inside, outside) static source INSIDE_Hosts INSIDE_Hosts static destination AnyConnect_Hosts AnyConnect_Hosts-route search
NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.60.0_26 NETWORK_OBJ_192.168.60.0_26 non-proxy-arp-search to itinerary
NAT (dmz, outside) dynamic interface of Generic_All_Network source
NAT (dmz2, outside) dynamic interface of Generic_All_Network source
Route inside 10.1.0.0 255.255.0.0 10.0.1.2 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
Enable http server
http 10.0.0.0 255.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
domain name full anyconnect.moxiefl.com
name of the object CN = AnyConnect.moxiefl.com
Keypairs AnyConnect
Proxy-loc-transmitter
Configure CRL
string encryption ca ASDM_TrustPoint0 certificates
certificate 439 has 4452
3082026c 308201d 5 a0030201 9a 445230 02020443 0d06092a 864886f7 0d 010105
05003048 06035504 03131641 6e79436f 6e6e6563 742e6d6f 78696566 311f301d
6c2e636f 312530 2306092a 864886f7 0d 010902 1616616e 79636f6e 6e656374 6 d
2e6d6f78 6965666c 2e636f6d 31333039 32373037 32353331 5a170d32 301e170d
33303932 35303732 3533315a 3048311f 301D 0603 55040313 16416e79 436f6e6e
6563742e 6d6f7869 65666c2e 636f6d31 86f70d01 09021616 25302306 092a 8648
616e7963 6f6e6e65 63742e6d 6f786965 666c2e63 6f6d3081 9f300d06 092 has 8648
86f70d01 01010500 03818d 00 30818902 8181009a d9f320ff e93d4fdd cb707a4c
b4664c47 6d2cc639 4dc45fed bfbc2150 7109fd81 5d6a5252 3d40dc43 696360d 5
fbf92bcc 477d19b8 5301085c daf40de5 87d7e4aa f81b8d7f 8d364dfa 0a6f07d7
6a7c3e9b 56e69152 aa5492d8 e35537bd 567ccf29 7afbeae8 13da9936 9f890d76
1d56d11d da3d039a 0e714849 e6841ff2 a3633061 03010001 300f0603 b 5483, 102
1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 86301f06 04030201 551d
23 04183016 80142f27 7096c4c5 e396e691 e07ef737 af61b71f 64f1301d 03551d
0603551d 0e041604 142f2770 96c4c5e3 96e691e0 7ef737af 61b71f64 f1300d06
092a 8648 86f70d01 01050500 03818100 8f777196 bbe6a5e4 8af9eb9a 514a 8348
5e62d6cd e430a758 47257243 2b 367543 065d4ceb 582bf666 08ff7be1 f89287a2
ac527824 b11c2048 7fd2b50d 6aa00675 e4df7859 f3590596 b1d52426 ca 35, 3902
226 dec 09 713f7ba9 80bdf7bb b52a7da2 4a68b91b 455cabba 4e77f4b0 1e97a52c
0cc4c6f3 f244f7d9 0a6e32fb 31ce7e35
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Telnet timeout 5
SSH 10.0.0.0 255.0.0.0 inside
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd dns 208.67.222.222 208.67.220.220
dhcpd outside auto_config
!
dhcpd addresses 10.0.1.20 - 10.0.1.40 inside
dhcpd dns 208.67.222.222 208.67.220.220 interface inside
dhcpd allow inside
!
dhcpd address dmz 172.26.20.21 - 172.26.20.60
dhcpd dns 208.67.222.222 208.67.220.220 dmz interface
dhcpd enable dmz
!
dhcpd address 172.26.22.21 - dmz2 172.26.22.200
dhcpd dns 208.67.222.222 208.67.220.220 dmz2 interface
dmz2 enable dhcpd
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect essentials
AnyConnect image disk0:/anyconnect-win-3.0.2052-k9.pkg 1
AnyConnect profiles AnyConnect_client_profile disk0: / AnyConnect_client_profile.xml
AnyConnect enable
tunnel-group-list activate
internal GroupPolicy_AnyConnect group strategy
attributes of Group Policy GroupPolicy_AnyConnect
WINS server no
value of server DNS 208.67.222.222 208.67.220.220
client ssl-VPN-tunnel-Protocol ikev2
moxiefl.com value by default-field
WebVPN
AnyConnect value AnyConnect_client_profile type user profiles
password username user1 $ $ encrypted privilege 15
password username user2 $ $ encrypted privilege 15
tunnel-group AnyConnect type remote access
tunnel-group AnyConnect General attributes
address VPN_POOL pool
Group Policy - by default-GroupPolicy_AnyConnect
tunnel-group AnyConnect webvpn-attributes
enable AnyConnect group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:f2c7362097b71bcada023c6bbfc45121
: end
Hello
You may have problems with the NAT configurations
Look at these 2 high page configurations
NAT dynamic interface of Generic_All_Network source (indoor, outdoor)
NAT (inside, outside) static source INSIDE_Hosts INSIDE_Hosts static destination AnyConnect_Hosts AnyConnect_Hosts-route search
The solution is either to reconfigure the dynamic PAT with the lowest priority (goes tearing down the current normal outbound connections) OR reposition the exempt NAT / configurations NAT0
Dynamic change of PAT could be done with
no nat dynamic interface of Generic_All_Network source (indoor, outdoor)
NAT automatic interface after (indoor, outdoor) dynamic source Generic_All_Network
NAT0 configuration change could be done with
no nat source (indoor, outdoor) public static INSIDE_Hosts static destination INSIDE_Hosts AnyConnect_Hosts AnyConnect_Hosts-route search
NAT (inside, outside) 1 static source INSIDE_Hosts INSIDE_Hosts static destination AnyConnect_Hosts AnyConnect_Hosts-route search
Changing the order of the NAT0 configurations as described above is probably the simplest solution and does not cause a teardown of connections for users. Of course change the dynamic configuration PAT would avoid future problems if it can generate. For example, it could overide static PAT (Port Forward) configured with Auto NAT configurations.
Try option suites you best and let know us if it solved the problem
Remember to mark a reply as the answer if it answered your question.
Feel free to ask more if necessary
-Jouni
-
Help, please! Cannot access the web after connected to the VPN
Hello
I'm a newbie on Cisco products. I configured a Cisco ASA 5505 with VPN firewall. However, I can't access the web after I connected to the remote IPSec VPN. I also cannot connect to the bands using the intellectual property. But I can connect to the internal servers in the office with no problems.
Here is my setup, can someone help please? Thank you very much
ASA Version 8.2 (5)
!
host name asa
xxxxxxxxx.com domain name
enable the encrypted password xxxxxxxxxxx
xxxxxxxxxxx encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
area of zone clock - 8 schedule
clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 107.204.233.222
name-server 192.168.1.3
xxxxxxxxx.com domain name
inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal strategy group xxxxxxxx-sc
attributes of xxxxxxxx-sc group policy
value of 107.204.233.222 DNS server 192.168.1.3
Protocol-tunnel-VPN IPSec
XXXXXXXXXX.com value by default-field
xxxxx xxxxxxxxxxx encrypted password username
Strategy Group-VPN-xxxxxxxx-sc
remote access to tunnel-group xxxxxxxx-sc type
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
Group Policy - by default-xxxxxxxx-sc
tunnel-group xxxxxxxx-sc ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02
: end
Hello
Try adding the following commands
permit same-security-traffic intra-interface
NAT (outside) 1 192.168.1.96 255.255.255.240
Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.
In this case, these configurations should do the trick
In order from top to bottom, they would do the following things
- First remove the pool VPN and VPN configurations
- Then remove the VPN pool
- Remake of the VPN Pool with different network
- Reattach the VPN pool for VPN configurations
- Configure NAT0 to the new cluster of VPN
- Remove the old line of the ACL of the configuration of NAT0
attributes global-tunnel-group xxxxxxxx-sc
no address-sc-swimming pool
no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0
IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240
Of course you also have the NAT configuration for VPN pools new Internet traffic
NAT (outside) 1 192.168.2.0 255.255.255.0
Please rate if the information has been useful if this resolved the issue as mark responded.
-Jouni
-
Continue the loop after the exception thrown in SQL
How would continue the while loop in the code below after an exception was thrown?
DECLARE v_blob_data BLOB; v_blob_len NUMBER; v_position NUMBER; v_raw_chunk RAW(10000); v_char CHAR(1); c_chunk_len number := 1; v_line VARCHAR2 (32767) := NULL; v_data_array wwv_flow_global.vc_arr2; v_rows number; v_sr_no number := 1; v_first_line_done boolean := false; v_error_cd number :=0; v_quote_pos1 NUMBER; v_quote_pos2 NUMBER; v_enclosed_str VARCHAR(200); v_errmsg VARCHAR2(4000); BEGIN delete from TEMP_MM_UPDATE where username = :P1_USER_ID; -- Read data from wwv_flow_files</span> select blob_content into v_blob_data from wwv_flow_files where name = :P2_FILE_UPLOAD; v_blob_len := dbms_lob.getlength(v_blob_data); v_position := 1; -- Read and convert binary to char</span> WHILE ( v_position <= v_blob_len ) LOOP begin v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position); v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk))); v_line := v_line || v_char; v_position := v_position + c_chunk_len; -- When a whole line is retrieved </span> IF v_char = CHR(10) THEN LOOP --Make sure there's something to replace IF INSTR(v_line, '"', 1, 1) = 0 THEN EXIT; -- If nothing to replace, exit loop and don't try END IF; --Find the position of the first and second quotes in the line of text v_quote_pos1 := INSTR(v_line, '"', 1, 1); v_quote_pos2 := INSTR(v_line, '"', 1, 2); --Extract the inner string v_enclosed_str := SUBSTR(v_line, v_quote_pos1 + 1, v_quote_pos2 - v_quote_pos1 - 1); --perform the replacement v_line := SUBSTR(v_line, 0, v_quote_pos1 - 1) || REPLACE(v_enclosed_str, ',', '<') || SUBSTR(v_line, v_quote_pos2 + 1); END LOOP; -- Convert comma to : to use wwv_flow_utilities </span> v_line := REPLACE (v_line, ',', ':'); v_line := REPLACE (v_line, '<', ','); v_line := REPLACE (trim(v_line), '-', NULL); --v_line := REPLACE (trim(v_line), '"', NULL); -- Convert each column separated by : into array of data </span> v_data_array := wwv_flow_utilities.string_to_table (v_line); --Check to see if the row of column headers has already been parsed through IF(v_first_line_done != true)THEN v_first_line_done := true; --Check column order in spreadsheet IF(v_data_array(1) LIKE '%Username%' AND v_data_array(2) LIKE '%NDN%' AND v_data_array(3) LIKE '%PCFN%' ) THEN v_error_cd := 0; v_line := NULL; ELSE v_error_cd := 1; END IF; --If first line is done and the column order is correct then ELSIF(v_first_line_done = true AND v_error_cd = 0) THEN -- Insert data into target table </span> EXECUTE IMMEDIATE 'insert into TEMP_MM_UPDATE (USERNAME, RPT_FLAG, PCFN) values (:1,:2,:3)' USING v_data_array(1), v_data_array(2), v_data_array(3); -- Clear out v_line := NULL; v_sr_no := v_sr_no + 1; END IF; END IF; exception WHEN OTHERS then v_errmsg := SQLERRM; insert into temp_mm_update (username,error_desc) values (:P1_USER_ID, v_errmsg); end; END LOOP; DELETE FROM WWV_FLOW_FILES where name = :P2_FILE_UPLOAD; DELETE FROM TEMP_MM_UPDATE WHERE USERNAME IS NULL AND PCFN IS NULL; IF(v_error_cd = 1) THEN INSERT INTO temp_mm_update (USERNAME, ERROR_DESC) VALUES (:P1_USER_ID, 'Error. Please check column order in spreadsheet.'); END IF; EXCEPTION WHEN NO_DATA_FOUND THEN insert into temp_mm_update (username,error_desc) values (:P1_USER_ID, 'No Data Found.'); WHEN OTHERS then v_errmsg := SQLERRM; insert into temp_mm_update (username,error_desc) values (:P1_USER_ID, v_errmsg); END;
When I set the exception inside the loop, as above, the procedure seems never to end, and I end up getting a 'NOWAIT' error when I try to remove the table or something like that.
The code works fine if I remove the 'START' just after the loop and also out of the exception within the loop, but I want to be able to specify what's wrong with each record rather than deal with the correct records and then stop after that it is a record that has, for example, 9 values in a column that accepts only 6.
Can anyone help with this?
Thank you
Steven
Play with my code I found what was wrong.I needed to add in the following line in my code block of exception:v_line := NULL; v_sr_no := v_sr_no + 1;
Final code:DECLARE v_blob_data BLOB; v_blob_len NUMBER; v_position NUMBER; v_raw_chunk RAW(10000); v_char CHAR(1); c_chunk_len number := 1; v_line VARCHAR2 (32767) := NULL; v_data_array wwv_flow_global.vc_arr2; v_rows number; v_sr_no number := 1; v_first_line_done boolean := false; v_error_cd number :=0; v_quote_pos1 NUMBER; v_quote_pos2 NUMBER; v_enclosed_str VARCHAR(200); v_errmsg VARCHAR2(4000); BEGIN delete from TEMP_MM_UPDATE where username = :P1_USER_ID; -- Read data from wwv_flow_files select blob_content into v_blob_data from wwv_flow_files where name = :P2_FILE_UPLOAD; v_blob_len := dbms_lob.getlength(v_blob_data); v_position := 1; -- Read and convert binary to char WHILE ( v_position <= v_blob_len ) LOOP begin v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position); v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk))); v_line := v_line || v_char; v_position := v_position + c_chunk_len; -- When a whole line is retrieved IF v_char = CHR(10) THEN LOOP --Make sure there's something to replace IF INSTR(v_line, '"', 1, 1) = 0 THEN EXIT; -- If nothing to replace, exit loop and don't try END IF; --Find the position of the first and second quotes in the line of text v_quote_pos1 := INSTR(v_line, '"', 1, 1); v_quote_pos2 := INSTR(v_line, '"', 1, 2); --Extract the inner string v_enclosed_str := SUBSTR(v_line, v_quote_pos1 + 1, v_quote_pos2 - v_quote_pos1 - 1); --perform the replacement v_line := SUBSTR(v_line, 0, v_quote_pos1 - 1) || REPLACE(v_enclosed_str, ',', '<') || SUBSTR(v_line, v_quote_pos2 + 1); END LOOP; -- Convert comma to : to use wwv_flow_utilities v_line := REPLACE (v_line, ',', ':'); v_line := REPLACE (v_line, '<', ','); v_line := REPLACE (trim(v_line), '-', NULL); --v_line := REPLACE (trim(v_line), '"', NULL); -- Convert each column separated by : into array of data v_data_array := wwv_flow_utilities.string_to_table (v_line); --Check to see if the row of column headers has already been parsed through IF(v_first_line_done != true)THEN v_first_line_done := true; --Check column order in spreadsheet IF(v_data_array(1) LIKE '%Username%' AND v_data_array(2) LIKE '%NDN%' AND v_data_array(3) LIKE '%PCFN%') THEN v_error_cd := 0; v_line := NULL; ELSE v_error_cd := 1; END IF; --If first line is done and the column order is correct then ELSIF(v_first_line_done = true AND v_error_cd = 0) THEN -- Insert data into target table EXECUTE IMMEDIATE 'insert into TEMP_MM_UPDATE (USERNAME, RPT_FLAG, PCFN) values (:1,:2,:3)' USING v_data_array(1), v_data_array(2), v_data_array(3); -- Clear out v_line := NULL; v_sr_no := v_sr_no + 1; END IF; END IF; exception WHEN OTHERS then v_errmsg := SQLERRM; insert into temp_mm_update (username,error_desc) values (:P1_USER_ID, v_errmsg); v_line := NULL; v_sr_no := v_sr_no + 1; END; END LOOP; DELETE FROM WWV_FLOW_FILES where name = :P2_FILE_UPLOAD; DELETE FROM TEMP_MM_UPDATE WHERE USERNAME IS NULL AND PCFN IS NULL; IF(v_error_cd = 1) THEN INSERT INTO temp_mm_update (USERNAME, ERROR_DESC) VALUES (:P1_USER_ID, 'Error. Please check column order in spreadsheet.'); END IF; EXCEPTION WHEN NO_DATA_FOUND THEN insert into temp_mm_update (username,error_desc) values (:P1_USER_ID, 'No Data Found.'); WHEN OTHERS then v_errmsg := SQLERRM; insert into temp_mm_update (username,error_desc) values (:P1_USER_ID, v_errmsg); END;
-
XML document lack of implementation in the form after adding the node
Hi all
I'm adding a new node to my XML document using java.
After I add, when I print the doc, I can see the xml code is not properly 'indexed' or 'formatted' (with a step internal node within the parent node.)
I have put OutputKeys.INDEX that Yes. But I still have this problem.
Kindlly help me regarding this.
Thank you
Sabarisri. NAfter I add, when I print the doc, I can see that xml is not properly "indexed" (sic, "indented") or 'formatted' (with a step internal node within the parent node.)
It is indeed a common place of what to get. Rarely these whitespace contravene semantic aspects of xml, but it's annoying to the human eye. The OutputKeys.INDENT on the transformer fixing certainly wouldn't heal and makes it worse.
If the lack of alignment gets enough wide, sometimes I use a custom xsl file to put an order of it. This is how the xsl looks like: it is just a slight development of an identity transformation. And I assume you are using jdk1.5 + packaged xerces and xalan.
Suppose to be called indenter.xsl, and put themselves in the working directory. Printing to a file may seem just that.
TransformerFactory tf = TransformerFactory.newInstance(); Transformer t = tf.newTransformer(new StreamSource("indenter.xsl")); //suppose the doc is the document parsed and edited in the memory, and outfile is the path to output file t.transform(new DOMSource(doc), new StreamResult(new FileOutputStream(outfile)));
I use xalan namespace to control the amount of space to indent. If you don't use of xalan, just leave these namespace declaration and the xalan:indent - amounted to and let the xsl processor using its default value.
If you prefer instead of writing your own small xsl utilities, you can maybe google (mainly in using key as pretty print or a utility called htmltidy with w3c) to clean the misaligned output. Or check the documentation on the xsl processor used, some processor could have custom method to do the same.
But cleaning may still run the risk of too interpret what can hold and is not. It is important to know what you finally want what to do and adjust according to your need.
Published by: tsuji on Sep 21, 2011 07:57
-
Truncate the text after the first line in TextFlow
I have a TextFlow object that is rendered in a Sprite with several lines.
For a compact display, I now want to show only the first line, followed by 3 dots (...).
I've not found a good approach up to now.
There is a support for truncation. It is limited to cases of use of label and requires the use of the TextLine factories. There is no support for text editable with truncation. Example below.
Hope that helps,
Richard
/**
ADOBE SYSTEMS INCORPORATED
Copyright 2011 Adobe Systems Incorporated
All Rights Reserved.NOTICE: Adobe permits you to use, modify, and distribute this file
in accordance with the terms of the Adobe license agreement
accompanying it. If you have received this file from a source
other than Adobe, then your use, modification, or distribution
of it requires the prior written permission of Adobe.
*/
package
{
import flash.display.DisplayObject;
import flash.display.Sprite;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.geom.Rectangle;
import flash.text.StyleSheet;
import flash.utils.ByteArray;
import flashx.textLayout.container.ContainerController;
import flashx.textLayout.conversion.TextConverter;
import flashx.textLayout.elements.TextFlow;
import flashx.textLayout.formats.TextLayoutFormat;
import flashx.textLayout.factory.StringTextLineFactory;
import flashx.textLayout.factory.TextFlowTextLineFactory;
import flashx.textLayout.factory.TruncationOptions;
[SWF(width="500", height="500")]
public class Truncation extends Sprite
{
public function Truncation()
{
stage.align = StageAlign.TOP_LEFT;
stage.scaleMode = StageScaleMode.NO_SCALE;
// sample of truncation with the StringFactory
var stringFactory:StringTextLineFactory = new StringTextLineFactory();
var stringSprite:Sprite = new Sprite();
stringSprite.x = 25; stringSprite.y = 25; addChild(stringSprite);
// this bounds has no maximum height
stringFactory.compositionBounds = new Rectangle(0,0,200,NaN);
stringFactory.text = "This is an extremely long and overly verbose string of text that I would like to see trunctated.";
// truncate after two lines
stringFactory.truncationOptions = new TruncationOptions(TruncationOptions.HORIZONTAL_ELLIPSIS,2);
stringFactory.createTextLines(function (obj:DisplayObject):void { stringSprite.addChild(obj); });
// sample of truncation with the TextFlowTextLineFactory
var flowFactory:TextFlowTextLineFactory = new TextFlowTextLineFactory();
var flowSprite:Sprite = new Sprite();
flowSprite.x = 25; flowSprite.y = 75; addChild(flowSprite);
// this bounds has no maximum height
flowFactory.compositionBounds = new Rectangle(0,0,200,NaN);
// truncate after three lines with a big red ellipsis
flowFactory.truncationOptions = new TruncationOptions(TruncationOptions.HORIZONTAL_ELLIPSIS,3,TextLayoutFormat.createTextLayoutFormat({ fontSize:24, lineHeight:0, color:0xff0000 }));
flowFactory.createTextLines(function (obj:DisplayObject):void { flowSprite.addChild(obj); },TextConverter.importToFlow(Data.markup, TextConverter.TEXT_LAYOUT_FORMAT));
}
}
}
class Data
{
public static const markup:String = "" + ";
"The following excerpt is from Ethan Brand by Nathaniel Hawthorne.
" +
"There are many such lime-kilns in that tract of country, for the purpose of burning the white marble which composes" +
" a large part of the substance of the hills. Some of them, built years ago, and long deserted, with weeds growing in the vacant round of the interior, which is open to the sky," +
" and grass and wild-flowers rooting themselves into the chinks of the stones, look already like relics of antiquity, and may yet be overspread with the lichens of centuries to come." +
" Others, where the lime-burner still feeds his daily and nightlong fire, afford points of interest to the wanderer among the hills, who seats himself on a log of wood or a fragment " +
"of marble, to hold a chat with the solitary man. It is a lonesome, and, when the character is inclined to thought, may be an intensely thoughtful occupation; as it proved in the case " +
"of Ethan Brand, who had mused to such strange purpose, in days gone by, while the fire in this very kiln was burning.The man who now watched the fire was of a " +
"different order, and troubled himself with no thoughts save the very few that were requisite to his business. At frequent intervals, he flung back the clashing weight of the iron door, " +
"and, turning his face from the insufferable glare, thrust in huge logs of oak, or stirred the immense brands with a long pole. Within the furnace were seen the curling and riotous flames, " +
"and the burning marble, almost molten with the intensity of heat; while without, the reflection of the fire quivered on the dark intricacy of the surrounding forest, and showed in the " +
"foreground a bright and ruddy little picture of the hut, the spring beside its door, the athletic and coal-begrimed figure of the lime-burner, and the half-frightened child, shrinking " +
"into the protection of his father's shadow. And when again the iron door was closed, then reappeared the tender light of the half-full moon, which vainly strove to trace out the " +
"indistinct shapes of the neighboring mountains; and, in the upper sky, there was a flitting congregation of clouds, still faintly tinged with the rosy sunset, though thus far down " +
"into the valley the sunshine had vanished long and long ago.
} -
Definition of a join in a join within the view object
I have an instance where I try to do joins in joins. The SQL is down, although it does not run. My questions are, what suggestions you have for this clean? Also, more important, I want to have the inner joins within the inner joins, within the view object. I can set the join type in the source of the VO, but what would be the type of instruction with the inner join internal?
Of MOT_QM_TERRITORY_QUOTAS TerritoryQuotaEO
INNER JOIN MOT_TERRITORIES AS TerritoryEO ON TerritoryQuotaEO.TERRITORY_VERSION_ID = TerritoryEO.TERRITORY_VERSION_ID
(INNER JOIN MOT_TERR_RESOURCES AS TerritoryResourceEO ON TerritoryEO.TERRITORY_VERSION_ID = TerritoryResourceEO.TERRITORY_VERSION_ID)
(INNER JOIN HZ_PARTIES AS PartyPEO ON TerritoryResourceEO.RESOURCE_ID = PartyPEO.PARTY_ID,)
INNER JOIN HZ_PARTIES AS PartyPEO1 ON TerritoryResourceEO.RESOURCE_ID = PartyPEO1.PARTY_ID))
INNER JOIN MOT_QM_TERR_QUOTA_CONFIG AS TerritoryQuotaConfigEO ON TerritoryQuotaEO.territory_id = territoryquotaconfigeo.territory_id
INNER JOIN MOT_QM_QUOTA_PLANS_VL AS QuotaPlanEO ON territoryquotaeo.quota_plan_id = quotaplaneo.quota_plan_id
LEFT OUTER JOIN MOT_QM_RESOURCE_QUOTAS WE ResourceQuotaEO TerritoryQuotaEO.TERRITORY_QUOTA_ID = ResourceQuotaEO.TERRITORY_QUOTA_ID
Any help would be appreciated. Thank you, KimKim,
VO expert mode allows you to specify a sql statement to create the original Version of. You put a complete SQL statement in the framework to execute it.
Again, you can change the location where clause and the order by clause. Just be careful when you use bind variables in your statement. Expert mode VO tend to be enveloped by another sql statement:select * from (your original sql statement here) QRSLT
If you add a where clause or clause by clause oder after the QRSLT (which is the case if you add where clause by addWhereClause() method, it must be remembered that the attributes are now named qrslt.attribute_name instead of org_table_name.attribute_name.)
On the other side, you can disable this envelope of the sql statement calling a method (can't remember which right now, so please look in the docs).Timo
-
Keep reading - in the order of the sibling nodes
Berkeley DB XML preserves read-in the order of the sibling nodes after reading in the XML document?
In other words does XPath expression: / node1/node2 [2] / node3 always return the same node
and doesn't depend on the storage format of data (XML file, container in Berkeley DB XML)?
TIA,
MaciejThe order of the document is always kept in the documents XML no matter where they are stored. Your query will return the same node regardless of the location of the source document (assuming it's still the same document).
Lauren Foutz
-
What is happening in the original file of the photo when I import it in Photos and I have the "Delete after import" box checked?
When organizing photos for Photos for Mac app, I find that the Photos makes "copies" of files within the library of Photos and must reference a file if your settings are such that you do not copy the original files in the Photos app.
Trying to manage the disk space for the Macbook Pro.
The delete after import is available only when you import a device - a camera, card, an iPhone, but not when you import files from a folder on the system drive.
You can delete the local image files of your system drive yourself, once you have imported the Photos and they were copied in the photo library.
I would never use the option "delete after Import. The files will be deleted until you can check if the files have been imported correctly. If you find out later, that some of the imported files are corupted and illegible, it will be repeated o toolate import, because the files have been deleted from the device. Or worse, if pictures should plant a reason any during the import, all the pictures will be lost, if you have enabled "delete after import.
Maybe you are looking for
-
iPhoto went after I updated my OS to El Capitan
Before upgrading my Macbook Pro, I had iPhoto and he had pictures in it. After that I upgraded to OS X El Capitan iPhoto is gone, also when I get on the app store its not available. If I re install, I find my photos in there? (I don't think right the
-
Satellite A300-22F - after standby fan no longer works
I use Windows 7 Professional on my laptop. If the laptop goes from standby mode the fan works no more. The laptop overheats and stops. How can I solve this problem?
-
WNDR 4300 loses 2.4 GHz Radio daily
I bought a router of 4300 in November 2013. Shortly after the purchase I had to reboot the router on a daily basis to maintain the wireless operation. Technical support provided a new update of the firmware which solved the problem. Fast forward to D
-
Hello. I am looking for the following under vi. I use a channel 16 DAQ card to read analog voltages in Labview. The main VI I use was downloaded from the examples NOR in 2004. The PC I used 04 was thrown at some point. I now use the same main VI on a
-
CRIO controllers can be configured to accept several SNTP IP addresses?
cRIO controllers can be configured to synchronize the SNTP servers using the following in ni - rt.ini: [TIME SYNCHRONIZATION]source_priority = sntp; RTC;source. SNTP. Enable = truesource. SNTP. Address = 10.0.58.1source. SNTP. Interval = 60source. SN