Preserve the State of the button is hidden or shown if reintroduction SCORM?

Similar Questions

• Cp8: Advanced - Interactions cannot get 'Forced browsing' through the buttons

  I'm going a little crazy because I am tring to do something fairly simple, and I've done it before. , I've reached a point of desperation.

  I'm just trying to do something 'forced browsing', where the user has all the buttons on a timeline before they:

  1. read audio library file

  2 see her continue button (which is hidden in the properties panel)

  My (default) method so far is to do this:

  1. create a variable for each button that is equal to 0.

  2. create a stock Standard, which assigns the value 1 to the variable (success)

  3. fix the Standard Actions to each button.

  4. create a conditional action that indicates if the value of all variables are equal to one, then the button continue will be shown, and will play the audio.

  Me seems logical, and other online sources suggest that it is correct, but it does not work.

  Can someone help me? I am desperate and pressed.

  You need a conditional action with two stops for each button. If you're on CP8, would recommend a personally shared action and put it in a file that you can always reuse as external library. For an action button will look like this:

  

  

  There are several threads showing the same solution. And on my blog there are that many use cases as well.

• Preserve the State of the radio between the frames button

  Is there a way to CS3 to preserve the radio button state (selected or not) from the frame to the frame?

  I have a multi application where users select Yes or no (radio buttons) to an array of questions; they complete these questions they click a button before moving on to the next section (set of questions). But I'm wanting to add a back button that allows them to go back and change their answers... How can I preserve the State of radio buttons clicked on the previous images, so that when they return to a previous image (or frameworks) these radio buttons, they chose are still selected?

  If the design is chronology based on you need to configure a form any memory (for example, a table) to keep the selection data so that when you enter a framework will you use what is stored to configure things.

• If the else statement when click the button

  Hello all;

  I ran into a project, I'm having a problem on how to encode.

  Scenario.

  You have 3 States of a button.

  MouseOver

  Mouseout/mouseouthandler()

  Mouse click

  Now.

  When the click of the mouse is done, I need to do the following.

  Under the MouseOver and mouseout/mouseouthandler().

  IF THEN MouseClick

  (Check if the button has been clicked or not)

  Preserve the State of the button

  ON THE OTHER

  (If has not clicked on the button, then change its status)

  Change the State of the button

  How do I d code this?

  Thank you

  Wayne

  Update of productivity: I added a second file (same link: see previous post).

  Productivity means that I then use a symbol.

  • ==> right click and then convert to symbol.
  • use ==> drag and drop library to the stage.

• How to change the initial state of the button text?

  blank_page

  The initial state of a button switches is one established in IUR editor before the program runs in the Panel of property whose screenshot you have set. I'm not aware of a way to programmatically change the IUR, especially if the target computer is not installed on the development system.

  If for some reason you won't change the default value in the editor of the UIR, then what you have to do is to define the corresponding attribute BEFORE the Panel opens and possibly call DefaultCtrl before you set the value by default so that the control is set programmatically by default, you have just put , depending on what it is.

• How to I raise an event based on the State of a button?

  I'm trying to trigger an event based on the State ON / OFF button.  When I click on the button, I want the structure of the event in a loop to trigger each iteration until the button goes back to the OFF position, manually or programmatically.  Is there an easy way to do this?

  Thank you very much.

  A structure of the event is absolutely necessary?  It's so simple with just a case structure, as shown in figure 1.  If you use a structure of the event, you can place the structure dealing with the push button inside the time-out event, as shown in Figure 2.

  

• change the State of the button

  Hi, I'm new to labview and I have a few questions.  I came to a point in my code where I'm stuck.  I have attached the code so you can see where I am.  My problem comes into play with the toggle button.  I need to know if there is a way to change its operation based on a condition.  I want to it have where when you press the button, it remains pressed.  But if it meets a condition, it turns itself off.  In my code, I have a point where I need an output message, but because the State of the button does not change, it keeps out the message unless I have disable the program.

  If that makes sense, anyone know of a solution to this?

  Thank you much for the help in advance.

  You can use a local variable of the control inside the structure of case where you write a fake to she to him popping up when you need to.  Your not actually change its operation, but it allows you to programmatically change the current state of the button.

• Several months ago the button, if that's what it's called, the task bar that displays hidden icons has stopped working.

  Original title: the task bar icons

  Several months ago the button, if that's what it's called, the task bar that displays hidden icons has stopped working. Can I get a virtual device driver format in the registry is incorrect when you use a disk with the drivers on this subject. I found information on how to correct this problem and now the botton of task bar work again although it works until the computer is used for a while. How is the hidden icon button suppose to work or it should be visible all the time? Also the virtual device driver registry entry has something to do with it? I think that the problem of the DMV has installed a Norton program antivirus software that was on a disc that came with the computer.

  Hello

  1 have had any changes made to your computer before this problem?

  I suggest you try the methods mentioned below and check if it helps:

   

  Method 1:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

   

• Where is the button "see the hidden taskbar icons?

  I can't find the button 'To see the hidden icons.'  I want to disconnect my external hard drive and it doesn't have an icon eject.  He had last week.  Huh?  When I go to MS Help I tells me to click on the button "See the taskbar hidden icons" but I don't see one.

  Is the small arrow to the right of the taskbar notification area.

• Is it possible to change the State through several buttons?

  If I have already created, say, 100 identical buttons, and I want to change the State 'down' to a new color other than black. is it possible to do it quickly? I use 9 Captivate.

  Because you talked about "buttons" I assumed that you were pointing to the InBuilt States: Normal, rollover and down. The situation with styles is a little confusing IMO concerning States. You cannot set the States in Manager of Style of the object, as was the case of the Captivate 8 buttons. Since 9 Captivate, you will need to define States in the Panel object, for custom reports also state in regard to integrated States. Part of the InBuilt says are really integrated in the style: this is the case for all of the State for the Image buttons, for the background/outline for other types and form buttons. The labels on the buttons (text, system and form) are not part of the style. The exception are the image buttons because you have to put the text in the images. If you add objects in integrated States, they wil not be part of the style.  Even for States custom: they are not part of the style. I have problems with this configuration of confusing. It would be much easier, I think, if everything was recorded in an object style could be edited and changed in the Object styles Manager.

  The button menu "three lines", also called the hamburger or hot dog button, has opportunities to save changes to an existing style, to create a new style to apply a style to objects with a different style by default (as long as you override, leading + sign to appear).

  This no doubt confused answer: the workflow, I proposed with object styles, does that for characteristics that are saved in an object style (there no real explanation to help him as far as I KNOW). Now, I understand your last answer (sorry) that you are talking about a State that isn't integrated, but custom. In this case, you cannot change this State for all buttons at the same time. Only way is to duplicate the buttons. My apologies, I may have to write a blog about the object styles and its Director. I've heard several trainers proclaiming that they never use the OSM.

• Position/size of the buttons changes when the state changes

  I have a lot of problems with forms configured as buttons ("use like button" checkbox checked) changing position on the stage, or changing size, when their States change. In other words, the size or position of a shape is different when the condition is 'Flipping' or 'Down' as opposed to the "Normal" position Are you looking for assistance to understand and control the behavior of the button shape.

  Thank you.

  What version do you have? It was a bug in the first release of 9. The current version is 9.0.1.320.

  Take a look at: release notes for Adobe Captivate 9.0.1

• State of the button does not

  Creates a button that has worked fine the first download.  slightly modified its size and now States have stopped working.  It's back to the top at the bottom of the page:

  Cakes for weddings, birthdays, events | The Cakery - Bristol Tea Cup

  The button above, it works fine.

  any help much appreciated.

  I had for some reason any two images of background on one of the button States. Click on remove the background and it worked perfectly.

  Thanks to ankushr40215001

• State of the button to trigger an action

  I am trying to create a button that when clicked will perform several actions: play a short audio and access to a slide. Is it possible to do by assigning an action to the button state down?

  You never raise the action of a State, always by the event of success of the

  button.

• States of the button (up/down/over) image does not work properly.

  The pictures below show the button before and after flying. I work in Captivate 9 - responsive project

  Why pointed State does not automatically the same size as the 'low' and 'up' State?

  How can I fix?

  

  You can check the exact version number? There was a fix published, which gives the 8.0.0.230 version. That the problem has been solved with the fix:

  Hot fix | Adobe Captivate questions 9

  Why an image button and not a form button?

• I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?

  I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?   using DreamWeaver CC

  Among the contributors here has a nice page explaining how to do what you want, using css.

  Indicator of persisting in the Menus - Page http://alt-web.com/