Preserving the persistence of application class id

Similar Questions

• Is there a way to disable the persistence of application frame?

  First of all, I love the beta release - the combination of the small interface, more instant layer improvements and typographic research make this obvious upgrade for me.

  But with the new awesomeness comes new issues: with CS5, if I single clicked on, say, my office so I had Photoshop (with no open files PSD), the entire application would be bit go further than I can get stuff without having to watch the big old empty shell of the app.

  This is not my experience with CS6. Maybe a beta version problem, or some prefs that I found not yet, or maybe the app is somehow interpret a pref "persist application framework" last I checked somewhere, but can't access (although I can never remember counted something like that). Whatever it is, it seems that I now need to each option-click on the desktop (which is painful, as I do on my other screen), or type the command "Hide Photoshop" to get the app out of my way, so I can do other things (I often switch between multiple applications). So my question: is there a way to make the framework of the non-persistent application?

  Otherwise, great app. I have not been this excited about a Photoshop upgrade over the years.

  Window > [disable] Appframe

  This should give you Your behavior ' e looking for

• I can't upgrade to Photoshop CC 2014, I get a Setup error: DF024: unable to preserve the original file to "/ Applications / Adobe Photoshop 2014/Adobe Photoshop 2014.app/Contents/Frameworks/ICUConverter.framework/Versions/3.6/libicucnv.dylib.36.0 CC CC" (

  I can't upgrade to Photoshop CC 2014

  I get a Setup error: DF024: unable to preserve the original file to "/ Applications / Adobe Photoshop 2014/Adobe Photoshop 2014.app/Contents/Frameworks/ICUConverter.framework/Versions/3.6/libicucnv.dylib.36.0 CC CC" (Seq 1120)

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Method Property set on the application class get

  Hi mates,

  Please help about this.

  I am self-taught on the peoplesoft application class.

  And I found that it is different from JAVA for property get method.

  Test cases, see the screenshot:

  http://note.Youdao.com/share/?ID=becfc6c74793a12e468d3f2b195a1816 & type = note

  When I create the class instance in record application peoplecode, messagebox, then the x property.

  then shows MessageBox (0, "", 0, 0, "herehere111") and the x is 1, stands for her running the get method, not run the set method and the value of z is not set at 222.

  How to call the set method?

  Reference on peoplebook:

  Set

  Syntax

  SetPropertyName StatementList End-Set
  
  
  
  

  Description

  Use the construction of the language during the implementation of the properties in an application class. All of the properties in an application class must be named uniquely. The new value for the property is available in the & parameter NewValue to the Set method.

  Note. You cannot create a property only. You can create only the get - set properties.

  Parameters

  The value PropertyName	Specify the name of the property that you are implementing.
  StatementList	Change the value of the property to be & NewValue.

  Returns

  None.

  Example of

  Set FruitCount &Fruitcount = &MyFruit[&NewValue].ActiveRowCount();
  End-Set;
  
  
  
  

  How the method to be called and the value & NewValue to pass?

  Appreciate it for any guide.

  Thank you.

  Set method is called when you assign a value to the property of the object.

  for example:

  & myFruitObj.FruitCount = 10;

• JavaFX - application of rotation transformation - preserve the State of processing before changing the parameters of rotation

  Hi people, I would like to ask for a help with my experiences of animation.

  case:

  -ball (sphere) moves and rotates in a direction around RotationAxis1. Rotation is defined on the object ball rotation by setting rotation.setAngle (angle1)

  -ball hits a wall

  -rotation axes change, now, the ball goes around RotationAxis2, new rotation of this axis starts angle2 = 0

  question:

  what I basically need is to preserve (save/apply) the transformation of rotation of the object, before changing the axis and an angle of new values, otherwise I'm ugly change in the rotation of the object

  If there is an object.rotateBy () and it would preserve his State, I wouldn't have such a problem, I could call

  object.rotateBy (angle); object.setRotationAxis (...), object.rotateBy (newAngle);

  After the piece of code works for me and it preserves the current state of rotation, all as he would continue to create new objects by adding transformations, this may not really be used in a real world scenario:

  ...

  getTransforms () .add (rotate);

  ...

  private void resetRotation() {}

  turn = new rotation (0, 0, 0, 0, new Point3D (motion.dy, - motion.dx, 0));

  getTransforms () .add (rotate); retains the current state of rotation and starts a new spin

  TODO: CELA WORKS BUT IT WOULD CASE MEMORY AND PERFORMANCE LEAKAGE - FIX IS NECESSARY!

  }

  what I'm looking for, it's something like:

  private void resetRotation() {}

  getTransforms () (rotate) .remove;

  applyTransformation (rotate);     can not find something like that

  turn = new rotation (0, 0, 0, 0, new Point3D (motion.dy, - motion.dx, 0));

  getTransforms () .add (rotate); retains the current state of rotation and starts a new spin

  }

  Any clue?

  Thank you!

  Use a concatenation:Rotate (JavaFX 8.0)

• With the persistence provider, why there is still need of so much manual effort?

  With persistence provider (EclipseLink), why there are still need so much manual effort in the following example shows how?
  Done following manual effort necessary to the app using EclipseLink?
  If the answer is Yes, the EclipseLink do for us?
  The following content is from this link: http://wiki.eclipse.org/EclipseLink/Examples/JPA/JSF_Tutorial
  
  _ Using JPA to implement Service
  
  The main resource to manage the UI tutorial is org.eclipse.persistence.jpa.example.inventory.ui.InventoryManagerBean. It contains a reference to the following classes that use APP to implement the services provided by this application:
  
  * org.eclipse.persistence.jpa.example.inventory.services.impl.ManagedOrderBean (implements org.eclipse.persistence.jpa.example.inventory.services.OrderService)
  * org.eclipse.persistence.jpa.example.inventory.services.impl.ManagedInventoryBean (implements org.eclipse.persistence.jpa.example.inventory.services.InventoryService)
  
  These two classes show how to use APP:
  
  Acquisition of an entity manager factory
  Create the entity
  * Read an entity
  * Update an entity
  Delete the entity
  
  
  Acquire a factory manager of the entity
  
  The ManagedOrderBean and the ManagedInventoryBean use an instance of org.eclipse.persistence.jpa.example.inventory.services.impl.JPAResourceBean class assistance to get an instance of the entity manager factory for the default named persistence unit that we have defined in the file persistence.xml (see Configuration of the persistence unit). This example shows how the entity manager factory is acquired.
  
  Acquisition of the managing body of the

  public EntityManagerFactory getEMF (){
      if (emf == null){
          emf = Persistence.createEntityManagerFactory("default");
      }
      return emf;
  }

  Once acquired, the ManagedOrderBean and ManagedInventoryBean classes use the entity manager factory to obtain an entity manager to perform all basic persistence operations (create, read, update and delete).
  
  
  Create an entity
  
  This example shows how the ManagedOrderBean using the EntityManager to create a new entity of the order.
  
  Creating a command in ManagedOrderBean

  public void  createNewOrder(Order order){
      EntityManager em = jpaResourceBean.getEMF().createEntityManager();
      try{
          em.getTransaction().begin();
          em.persist(order);
          em.getTransaction().commit();
      }finally{
          em.close();
      }
  }

  ...

  Hello
  If you are using an IDE like Eclipse 3.5, JDeveloper 11.1.1.1 or NetBeans 6.8M1 - EAR project assistants it will generate more all for you when you select the EclipseLink JPA default persistence provider.
  Also, try the other tutorial JPA JSF - no based which shows the minimum get a compatible standard injected JEE EM using a JTA data source in a stateless session bean used by a customer of controller simple servlet. There are versions of this example for all major application servers using Oracle or Derby as a database.
  http://wiki.Eclipse.org/EclipseLink/examples/JPA/WebLogic_Web_Tutorial
  All tutorials EE and SE
  http://wiki.Eclipse.org/EclipseLink/examples/JPA

  All Tomcat base JPA tutorial will be a little more complex because Tomcat is not an EE real container - it only implements a web container with support for JTA datasource and lack of support for a managed container of JPA persistence context (so no injection of @PersistenceUnit EMF - it uses the class persistence bootstrap instead). That is why transactions and lifecycle States EM/EMF must be managed by the application and not transparently via default values annotation as a full EA server would be for you in GlassFish, JBoss, WebSphere, WebLogic and OC4J for example - tutorials for these EA servers are simpler.

  Thank you
  /Michael
  http://www.EclipseLink.org

• Looking for a replacement for opening that preserves the adjustment (in opening).

  Photos for Mac OS is not rushing to meet the needs of more than 90%, so I need a replacement of spares for Aperture.

  I have a library approaching 100 000 photos so import is a major concern. I'm looking for an app that will preserve the adjustments made within the opening. It's almost not negotiable :/

  Thank you

  Photos for Mac is the only application I know of, who keeps the aperture settings. Too bad it does not your other needs. It does not allow to customize the workspace with presets like Aperture, it does not support the presets for metadata and bath not changing, almost no support for the referenced images.

• to access the QML attached objects in C++ and best practices for the handling of the user interface in classes

  Hello

  I have in fact 2 queries

  (1) how can we access attachedobjects defined in QML in C++?

  (2) I'm loving development on Blackberry 10 C++ is one of my favorites. But I'm a bit lost when it comes to managing the user interface in classes. For example when we create the project through momentics we have a class called ApplicationUI. It manages all the (default) user interface commands, we in C++. as for example creating the document qml and setting as root user interface, etc. I am now working on an app that have NavigationPane as root, and then I continue to push pages (like the screens). But now the code for all pages is inside my ApplicationUI. What is the best practice to keep the UI for each page logic in a separte C++ class?

  I also develop for Android that a separate class for each activity, this code does not mingle for each activity. Please guide me how can I keep logic of user interface of each Page into a separate class of C++?

  regarding your second question:
  I think this is the simplest approach to keep all things in the UI in QML. You can easily put things into separate files.

  If you want to use c ++ to the user interface: can be done, too. just put it in separate classes and include those in your application class.

• Method that returns the bb::cascades:Application?

  Hi, is there a method that returns the bb::cascades:Application?

  I solved the problem by simply passing the request of my class that needs it. If its solved because there is no such method I think.

• Persistence of application data

  Hi, guys

  Struggling for a while with the fallowing problem:

  I have a fairly complex data (a tree) structure that contains the data to a file structure and some additional info. I'm the persistence it. (Implementation Persistable and everything is fine).

  If I insert my the PersistenceStore structure, change (say adds or removes branches) and exit the application without saving it (the call to commit), I can still see the change I made.

  Is this a normal behavior?

  One solution, I can think of is to make a copy of the charge structure and use it in my code. The copy will not fall to persistence if I hit save, y at - it another way?

  See you soon!

  Alex

  «So in order to have a mechanism to backup/throw for my updates I should clone the object after loading from PS and make changes to the clone...» »

  Fix.

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• JUnit Test Suite Limitations on the number of test classes can be included in the suite

  I run JUnit tests on my ADF Model picardalice in an application. I'm getting an instance of a request through the class of the device module and it helps in my test classes. It was created using all the Test Suite of Business components in JDeveloper 12.1.3.

  I'm running a JUnit test suite and it has several test classes in its operation. It runs successfully some and others fail. If I run those who fail by themselves, they are successful. If I remove the test classes in the suite they work (even those who have failed when the test classes were listed as a result of tests).

  Here is my code for the test method.

  @Test

  public void testAccess() {}

  See ViewObject = fixture1.getApplicationModule () .findViewObject ("ProjEstimateDtlVO");

  assertNotNull (view);

  }

  the ViewObject perspective comes return null for the execution of the test suite during all test classes are ran. It's successful return if I run one test case. It's successful return if I remove test classes in the following before running the suite.

  There are 70 + test classes in the suite. Is there a limitation on the number of test classes that must be executed in a test suite? Is it because it is repeatedly using an instance of the application module? Is this other thing?

  Everyone ran through this?

  Thank you.

  The problem in my case was because in one of the test cases I was releasing the module of the application in the method of disassembly. Since the application module was created once again, when I ran after tests and he ran this test scenario, anything after this would fail due to no application being created module.

  Thanks, Timo

• JavaFX binding throws illegal state Exception: not on the thread of Application FX

  Hi all

  I am updating a label of a task using bindings.

  However, when I 'Bind' the label text property with a property of the task, Illegal state exception string is thrown. Saying: this is not not on the thread of JavaFX.

  The Exception occurs whenever I try to set the property of the task of the Interior string.

  Please do not suggest to use the platform. RunLater(). I want to do this through links as the values I am trying to display in the label (later on) could change too frequently, and I don't want to flood the queue of the thread of the user interface with executable objects.

  Please let me know what I'm doing wrong and what I need to change to make it work properly with links. (I'm new to links and concurrency JavaFx API)

  Here is my Code.

  public class MyTask extends Task<String>{
  
      MyTask(){
         System.out.println("Task Constructor on Thread "+Thread.currentThread().getName());
  
  
      }
      private StringProperty myStringProperty = new SimpleStringProperty(){
          {
              System.out.println("Creating stringProperty on Thread "+Thread.currentThread().getName());
          }
      };
      private final void setFileString(String value) {
          System.out.println("Setting On Thread"+Thread.currentThread().getName());
          myStringProperty.set(value); }
      public final String getFileString() { return myStringProperty.get(); }
      public final StringProperty fileStringProperty() {
          System.out.println("Fetching property On Thread"+Thread.currentThread().getName());
          return myStringProperty; }
      
      @Override
      public String call() throws Exception{
          System.out.println("Task Called on thread "+Thread.currentThread().getName());
  
  
         for(int counter=0;counter<100;counter++){
             try{
             setFileString(""+counter);
             }catch(Exception e){
                 e.printStackTrace();
             }
             Thread.sleep(100);
             System.out.println("Counter "+counter);
         }
         return "COMPLETED";
      }
  }
  
  
  public class MyService extends Service<String> {
  
  
      MyTask myTask;
  
      public MyService(){
          System.out.println("Service Constructor on Thread "+Thread.currentThread().getName());
          myTask=new MyTask();
      }
  
      @Override
      public Task createTask(){
          System.out.println("Creating task on Thread "+Thread.currentThread().getName());
          return myTask;
      }
  
  }
  
  
  public class ServiceAndTaskExperiment extends Application {
      @Override
      public void start(Stage stage) throws Exception {
          Parent root = FXMLLoader.load(getClass().getResource("Sample.fxml"));
          Scene scene = new Scene(root);
          stage.setScene(scene);
          stage.show();
      }
      public static void main(String[] args) {
          launch(args);
      }
  }
  
  
  public class SampleController implements Initializable {
      @FXML
      private Label label;
  
      @FXML
      private void handleButtonAction(ActionEvent event) {
          System.out.println("You clicked me!");
          myTestService.start(); //This will throw out exceptions when the button is clicked again, it does not matter
      }
  
      MyService myTestService=new MyService();
      @Override
      public void initialize(URL url, ResourceBundle rb) {
          label.setText("Hello World!");
          //adding the below Line causes the exception
          label.textProperty().bind(myTestService.myTask.fileStringProperty()); //removing this line removes the exception, ofcourse the label wont update.
      } 
  }
  //sample.fxml
  <?xml version="1.0" encoding="UTF-8"?>
  <?import java.lang.*?>
  <?import java.util.*?>
  <?import javafx.scene.*?>
  <?import javafx.scene.control.*?>
  <?import javafx.scene.layout.*?>
  
  
  <AnchorPane id="AnchorPane" prefHeight="200" prefWidth="320" xmlns:fx="http://javafx.com/fxml" fx:controller="serviceandtaskexperiment.SampleController">
      <children>
          <Button layoutX="126" layoutY="90" text="Click Me!" onAction="#handleButtonAction" fx:id="button" />
          <Label layoutX="126" layoutY="120" minHeight="16" minWidth="69" fx:id="label" />
      </children>
  </AnchorPane>
  
  
  
  

  And it is the output with links on:

  Output: when the link is activated label.textProperty () .bind (myTestService.myTask.fileStringProperty ());

  Service on JavaFX Application Thread constructor

  Creating string on thread JavaFX Application Thread

  Task, Builder on JavaFX Application Thread

  Get the property on request ThreadJavaFX wire

  You clicked me!

  Creating a task on a thread Thread Application JavaFX

  Task called threadThread-4

  Setting on ThreadThread-4

  java.lang.IllegalStateException: not on the application thread FX; currentThread = Thread-4

  at com.sun.javafx.tk.Toolkit.checkFxUserThread(Toolkit.java:237)

  at com.sun.javafx.tk.quantum.QuantumToolkit.checkFxUserThread(QuantumToolkit.java:398)

  to javafx.scene.Parent$ 1.onProposedChange(Parent.java:245)

  at com.sun.javafx.collections.VetoableObservableList.setAll(VetoableObservableList.java:90)

  at com.sun.javafx.collections.ObservableListWrapper.setAll(ObservableListWrapper.java:314)

  at com.sun.javafx.scene.control.skin.LabeledSkinBase.updateChildren(LabeledSkinBase.java:602)

  at com.sun.javafx.scene.control.skin.LabeledSkinBase.handleControlPropertyChanged(LabeledSkinBase.java:209)

  to com.sun.javafx.scene.control.skin.SkinBase$ 3.changed(SkinBase.java:282)

  at javafx.beans.value.WeakChangeListener.changed(WeakChangeListener.java:107)

  to com.sun.javafx.binding.ExpressionHelper$ SingleChange.fireValueChangedEvent (ExpressionHelper.java:196)

  at com.sun.javafx.binding.ExpressionHelper.fireValueChangedEvent(ExpressionHelper.java:100)

  at javafx.beans.property.StringPropertyBase.fireValueChangedEvent(StringPropertyBase.java:121)

  at javafx.beans.property.StringPropertyBase.markInvalid(StringPropertyBase.java:128)

  in javafx.beans.property.StringPropertyBase.access$ 100 (StringPropertyBase.java:67)

  to javafx.beans.property.StringPropertyBase$ Listener.invalidated (StringPropertyBase.java:236)

  to com.sun.javafx.binding.ExpressionHelper$ SingleInvalidation.fireValueChangedEvent (ExpressionHelper.java:155)

  at com.sun.javafx.binding.ExpressionHelper.fireValueChangedEvent(ExpressionHelper.java:100)

  at javafx.beans.property.StringPropertyBase.fireValueChangedEvent(StringPropertyBase.java:121)

  at javafx.beans.property.StringPropertyBase.markInvalid(StringPropertyBase.java:128)

  at javafx.beans.property.StringPropertyBase.set(StringPropertyBase.java:161)

  at javafx.beans.property.StringPropertyBase.set(StringPropertyBase.java:67)

  to serviceandtaskexperiment. MyTask.setFileString (MyTask.java:24)

  to serviceandtaskexperiment. MyTask.call (MyTask.java:36)

  to serviceandtaskexperiment. MyTask.call (MyTask.java:11)

  to javafx.concurrent.Task$ TaskCallable.call (Task.java:1259)

  at java.util.concurrent.FutureTask.run(FutureTask.java:262)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615)

  at java.lang.Thread.run(Thread.java:724)

  Output with links removed: (label will not be updated)

  Service on JavaFX Application Thread constructor

  Creating string on thread JavaFX Application Thread

  Task, Builder on JavaFX Application Thread

  You clicked me!

  Creating a task on a thread Thread Application JavaFX

  Task called threadThread-4

  Setting on ThreadThread-4

  Counter 0

  Setting on ThreadThread-4

  1 meter

  Setting on ThreadThread-4

  2 meter

  Setting on ThreadThread-4

  If myStringProperty is bound to the textProperty of etiquette, you can only change it on the Thread of the JavaFX Application. The reason is that change its value will result in a change of the label, and changes of live parts of the graphic scene cannot be performed on the Thread of the JavaFX Application.

  Task and Service classes expose a messageProperty you could use here. The Task class has a updateMessage (...) method that changes the value of the message on the Thread of the JavaFX Application property. It also merges calls in order to prevent the flooding of this thread. If you could do the following in your MyTask.call () method:

  updateMessage(""+counter);
  

  and then in your controller just do

  label.textProperty().bind(myTestService.messageProperty());
  

  If you don't want to use the messageProperty for some reason any (for example you are already using it for something else, or you want to make something similar to a property that is not a string), you must merge the updates yourself. What follows is based on the source code of the task:

  public class MyTask extends Task {
  
       // add in the following:
      private final AtomicReference fileString = new AtomicReference<>();
  
      private void updateFileString(String text) {
          if (Platform.isFxApplicationThread()) {
              setFileString(text);
          } else {
              if (fileString.getAndSet(text) == null) {
                  Platform.runLater(new Runnable() {
                      @Override
                      public void run() {
                          final String text = fileString.getAndSet(null);
                          MyTask.this.setFileString(text);
                      }
                  });
              }
          }
      }
  
     // Now just call updateFileString(...) from your call() method
  }
  

• How can I fix this error: DF024: unable to preserve the original file to... Error 32 the process cannot access the file because it is being used by another process. SEQ (1352).  ?

  I install creative cloud desktop application Illustrator on a machine with windows 7 64 bit running in a domain environment.  The download begins and takes about runs for a bout 10 minutes and then stops with error: DF024: impossible to preserve the original in "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" file error 32 the process cannot access the file because it is being used by another process. SEQ (1352)

  I am logged on as network administrator, and there is no other apps except a web browser (Chrome) running.  There is no other users logged in to the machine.

  How can I see what another process is using the file necessary so that I can fix it?

  Thank you

  MelissaB34 if you continue to face the difficulties of installation, you can also try to use the CC cleanup tool to help ensure a clean removal of the software.  You can find more information, as well as a link to download the CC cleaning tool, to use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

• Can you please give some advice on the ToolTip used in the new packaged applications

  Hello
  I use apex 4.1 theme 23.
  I would use the ToolTip used in the new packaged app.
  Can you please give some advice or the "Details" on ToolTip, used in the new packaged applications. for example: go live checklist request.
  Once we fly over "Check list items" region. We get the tootip.
  
  1. how to find the class "detailedStatusList".
  2. how to find "detailedStatusListToolTip();" JavaScript function used in "execute when Page Loads.
  3. is there a tool to generate the source in the region to "check list items.
  
  I don't know if there are more, I need to know...
  
  * the tooltip plugin isn't solid...
  
  Kind regards
  Water

  Good morning, water,

  My goal is to use it in IR for the column notes. I can't show all the notes on the report. so I use RPAD to show only the first words. and the rest should be available by using the ToolTip.

  Fact :D

  You need to use SUBSTR to restrict the notes to a few words, not RPAD.

• I changed the IR query as follows...

  select
  Deptno,
  Dname,
  Loc,
  substr(notes,1,25) || '<div class="long-notes" style="display:none;">'||notes||'