Preset device

Similar Questions

• Changing of country Sony XNV - 770BT FM radio

  I have a XNV-770BT and I try to use it in South Africa, but radio stations move in increments of 0.2, y at - it an option to change the region or country?

  Thanks in advance!

  Hi Chistucky,

  The United States FM station frequency is always an odd number. As this unit is designed to be used in the United States, the system on the presetting device stores that strange number FM radio frequencies (95.7 Mhz, 100.1 Mhz, etc) and it will not save an even number of radio frequency. There is no option to change the region or the country.

  If my post answered your question, please mark it as an "accepted Solution".

• How the output voltage is coded on 16 bits DAQmx devices?

  In our laboratory, we have two devices DAQmx, the NOR-PCIe-6363 and the NOR-PCI-6733. Both have 16-bit for bipolar analog output precision. I understand that the small voltage difference that can be made is 2 * Vref/2 ^ 16, where Vref is the reference AO voltage (10 Volts or externally provided for 6733, 10 or 5 Volts or externally supplied for the 6363).

  I wanted to know how the output voltage is coded. DAQmx functions take 64 bit floats as input, and at some point, they must have their reduced accuracy. How is this done rounding, is a floating point around the nearest possible tension, or is always rounded down or always rounded upward?

  What is all the possible output voltages? Some diagrams in NOR-DAQmx help/measurement Fundamentals, signals, Analog, sampling considerations seem like they could involve the maximum voltage + Vref is not achievable, so I think that is all of the possible tensions - Vref + 2 * Vref * n/2 ^ 16, with n ranging from 0 to 2 ^ 16-1 included. This includes - Vref and does not zero but + Vref.

  Could I get confirmation on this point, or be corrected if it is wrong?

  Hi Chris,

  The scale of writing DAQmx version performs double floating precision scaling and then he made a turn, the closest to convert the resulting code of the DAC to double int16_t (or uint16_t for unipolar devices). Floating point scale includes the custom scale AO if you have configured one, the conversion of volts or AMPS to the codes of the DAC and for some devices, the calibration scale.

  You can check the coefficients of scaling using the AO. Property of DevScalingCoeff. It takes V / A-> CAD codes and scaling into account calibration, but not the scales to customized AO.

  The PCIe-6363 X series devices preset scaling in software. The internal reference of the AO is slightly higher than 10V, to correct the errors of gain and offset does not limit the output range. It also means that you are not limited to 9.9997 V on this device when you are using an internal reference.

  The PCI-6733 uses calibration DAC instead of software scaling. RAW - 32768 means - 10 V, 0 corresponds to 0 V, 32768 is impossible because of two of the 16 bits of the add-in and 32767 translates 9.9997 V. When you continue 10 V to write DAQmx with this device, DAQmx he forced into 9.9997 V.

  Note that for these two devices, the absolute accuracy full scale includes over 305 uV of error. Look at the tables of absolute precision AO in the specs of the device for the full story.

  Brad

• Registering a dll file to start the service HID Input Device

  Hello

  I would like to register the dll located in my System32 hidserv.dll. However, when you enter the command 'regsvr32 hidserv.dll' I have an error message indicating that: "hidserv.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. "

  How I then save it, knowing that I checked that this file is not corrupt?

  I need to register this dll in order to start the "HID Input Device" who stubbornly refuses to start despite an integrity check in the registry.

  The system event viewer specifies that:

  "HID Input Service service terminated with the error:
  Error 126: The specified module is not found. "

  I already tried to extract hidserv.dll, mouclass.sys & mouhid.sys sp2 and sp3 even to put them in the C:\Windows\System32 directory, but I had no change.

  The files I have place in my SYSTEM32 have the following version:
  Hidserv.dll: 5.1.2600.5512
  Mouclass.sys: 5.1.2600.5512
  mouhid.sys: 5.1.2600.0

  but the service still does not start even after rebooting. The 126 error continues. Is there other files to extract / expansion?

  I checked the integrity of all stakeholders key in the registry (for example, to have the "ServiceDll" key whose value is "% systemroot%\System32\hidserv.dll" in the settings of the service HIDserv ControlSets), but nothing more.

  I give you an export of the current CS:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ]
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 00, 00
  "Description"="allows generic inbound access to the user interface devices, which activate and maintain the use of the active buttons preset on the keyboard, remote controls, and other multimedia devices. If this service is stopped, the normal controlled active buttons not of will operate this service don't. If this service is disabled, any services dependent on explicitly will not start. »
  "DisplayName"="HIDDEN Service entry.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000020

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" = hex (2): 20, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Enum]
  "0" = "Root\\LEGACY_HIDSERV\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  By analyzing the Observer newspaper of events more deeply, I could identify the date on which took place the first concern. The problem is dated, 18/08/2010 at 11:59:17 (it sticks with the conclusion of the first concern of losing control of my volume on my Logitech G110 keyboard also control buttons). I don't remember having a particular to this date on my system change, except perhaps a Windows Update automatically.
  I could not try a system restore, knowing that the RP oldest I have is dated 20/08, so downstream of the original problem.

  I ran a File Checker sfc/scannow system with my Windows XP Pro SP3 (current version of my system) installation cd. I've been thinking about it since a cd to install Windows XP Pro SP2, but better is worth twice more than once. I also realized a CheckDisk, but these two operations have not changed the problem.

  You will find export of address following my diary of events on the system.

  I have completed all of the tasks (start, replacement dll, see registry, SFC,...) while logged on sessions 'standard user', 'administrator' and even as a 'SYSTEM' (NT Authority), but in none of these configurations, it was possible for me to start this service. If I come to you, is precisely to avoid passing through a repair using the cd which would have made me lose a lot of time. I don't usually do the use of support services, in general the case has already been handled and the response or similar cases are on the web. But now I feel like in front of a technical impasse. I appeal to your specific skills to do what is necessary for good service restarting without using a remedy that eventually a reinstallation of the system.

  It you want to check my configuration, you can find it here.
  If you need more information, feel free to contact me. I would be happy to answer them.

  Until then, thank you very much. Kind regards.

  Arnaud TIERANT.

  First of all, the hidserv.dll is not a DLL that can be recorded.  You can try all day long, but it will not be because he is not on the list of DLLs that will be or must be registered.  There is a list, and which is not on it.  (well thought of).

  Your problem is in the registry with the HidServ, section ServiceDLL parameter.

  You have a space left in the key ServiceDLL.  In regedit, it should look like this:

  %SystemRoot%\System32\hidserv.dll

  Yours probably looks like this in regedit:

  %SystemRoot%\System32\hidserv.dll

  See the space left?  I don't know how it got that way (perhaps something that was installed for these humans), but I know that if I put a space in front of me and restart my system, HID service not start and give me an error 126 as you describe.  He has no idea about the problem in the log events.

  With space on the left, the specified module really not found because there is no such thing as the path (with the space to the left).

  Your registry export reveals this problem.

  Yours looks like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 20, 00, 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  It should look like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  In your, you can see I have stuff in bold print on the front of the chain: 20.00...  In hexadecimal, is a space and a null value (null value is correct).  You must use regedit to get rid of this leading space (20 hex), and don't forget that, in the settings section, the first character of the value ServiceDLL is the % sign (which is a hexagon of 25).

  You can, of course, just change the string, delete everything that is there, and retype the value if it looks like this without spaces attack/crawling:

  %SystemRoot%\System32\hidserv.dll

  The HID Service will not start if you come to make the changes and try to start the service.  After making your changes, you need to restart, you can check it out, and then start the service HID.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• restore factory presets - Toshiba - Windows Vista

  I bought a Toshiba laptop used with Windows Vista home premium already installed SP2 - (64-bit OS so not too bad)

  I would like to return to factory set up to my Gdaughter presets.

  The previous owner did erase any personal information - but a requirement administrator PW was left.

  So I guess I have to get the requirement of PW Admin deleted first - then I need help on how to reset this computer is 'new' so to speak - thanks in advance!

  Hello

  We can not help you with passwords.

  The advice is to clean install; in this way, you can not access everyone's data.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  @@@@@@@@@@@@@@@@@@@@@@@@

  'How to reset my computer to factory default (System Recovery) State?'

  http://www.MyToshiba.com.au/support/items/FAQ/71#HDDrec

  1 press and hold the power button for ten (10) seconds to turn off your device.

  Please note: press and hold the power button on the computer requires to turn off. All unsaved data will be lost.

  2 press and hold the 0 (zero) on the top of the keyboard (not the zero on the numeric keypad key) and at the same time, press the button power once to turn on your laptop.

  3. when the Toshiba screen appears; release the 0 key.

  etc.

  @@@@@@@@@@@@@@@@@@@@@@@@

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Dell Inspiron M5030 black screen when installing Windows 8.1 on 'Get Ready devices.

  Dell Inspiron M5030

  I had Windows 7 installed and works perfectly, but I wanted to install Windows 8.1, I tried a new install first (also tried to upgrade to windows 7). Everything installs fine but when it restarts for the first time the windows logo appears and 'Getting devices % ready' then the screen goes black.

  Ive tried:
  -For let sits for awhile to see if it comes back, and I get nothing after hours
  -J' plugged a monitor without response (also tried to close the cover put to sleep and go to bed)
  -J' quit and tried to start in Safe Mode, but it says that Windows cannot boot mode safe because windows setup has not finished

  I can start on my windows repair and go to the recovery prompt but don't know what to do. It looks like a video driver issue, the laptop has an AMD Radeon HD 4200. If thers any why to install the driver before implementation ready devices? Help, please!

  I had the same problem and did this and it worked without problems... The idea is to integrate the drivers updated in the ISO/DVD. The drivers supplied with the W8.1 DVD do not work as well as I was getting the BSOD with the installation.

  1. download Winreducer and install all the 3rd party software that it requires.  Look in the howto.pdf

  2. download the latest AMD Catalyst drivers from AMD website (not beta).  Drivers Windows 8, I think that the list.

  3. extract the files to temp dir.

  4 copy files and drivers since the temp (packages\drivers\display\w86a_inf) directory and the sub (B149756) to the dir dir drivers winreducer (work\integrate\drivers\x64).  In the x 64 dir, you should have cats, msi, INF and the b149756 files.

  5. run winreducer.  Make sure you have practice an iso to DVD Windows 8.1.

  6. Once you mount your iso, you will spend for options and features screen.  You can see the presets, appearance, features... on top.   Let alone all the options EXCEPT the location of the drivers under System.  Change this to x\WORK\INTEGRATE\DRIVERS\x64.  Don't forget to change the x to your location.

  7. click on finish.  Save as an iso. Apply.  It will save the iso changed in the winreducer folder.

  8 burn and install.

  9. After you are done installing, install the driver package that you downloaded in step 2 by running setup.exe in the main dir.

  10 thank me LOL

  It worked for me on an Inspiron M5030.  I hope that my answer is detailed enough.

• Display Dell Feature Request Manager: ability to associate an ICC profile preset and automatically switch

  I have a Dell U3014 and I love this monitor. I also like the display Manager software that allows me to quickly change the presets to monitor without messing around with the OSD or completely automatic based on the application that I use. The problem: many people, including that using end monitors need to render accurate colors and for this reason they calibrate/profile their monitors. Each preset needs that we present independently and has an associated ICC profile. Especially in windows, it is necessary to use an sRGB preset based for color unmanaged applications, while a wide range of predefined such as Adobe RGB is used on applications such as photoshop color management, lightroom etc. Manager display Dell offer a quick and elegant solution for the preselections, either by selecting a quick menu, either by automatically associating a preset for a given application (i.e. photoshop is enabled, go to Adobe RGB). It works very well, however the selection of the appropriate profile must be done manually and it's quite tedious (open the resolution of the screen change applet, click Advanced setting, open the color management applet, select the appropriate monitor and finally load the profile ICC proper). It's a lot of time and pain that could be completely and painlessly by DDM the automated solution: a small improvement to DDM may be in the form of a tab in color management, where an existing ICC profile may be associated with a given preset. If a preset has an associated ICC profile, DDM will load the appropriate corresponding ICC profile when it switches preset. Windows has API to load ICC profiles that are easy to use. I even tried to write my own software. Switching profiles is not complicated. What is difficult is to SDC/DI allows you to change the presets on the monitor. There is no free library to do that I could find. The company that makes this software to display for Dell Manager, EnTech sells libraries which SDC/DI but are more expensive that I can afford. I think to add such a device to DDM, would be an effort across very minor EnTech part, but the benefits for users would be great. If such a device would be helpful for you, or if you have any other suggestions please post them here. I hope that if there is an important need for it, Dell can ask EnTech to incorporate it into a future version of the MDD. Thank you.

  Thank you very much. It worked! Now, on the display manager, I have a small ICM button where I can link a CIM profile in a "Preset". It works beautifully. As a suggestion, it would be nicer to display in the ICM selection menu the name of the profile from its metadata rather than the file name of the profile itself as many profiling rather than application of the colour profile human-readable name in metadata and use a hex hash to force the user to open the applet from color correction to match the name of the file which is which. Also, the list is completed by the name of old profiles that have already been deleted. Whence the list?  These files are not in my windows/system32/spool/pilot/color directory more, are in the registry and also do not appear in the applet of color correction.

  Would be very happy to beta-test report and new updates.

  Thanks again for adding this feature. It is very useful

• Removed the GPS metadata while applying the Preset on Import (Canon 6 d)

  I spoke to Canon support already and I found that my pictures on my computer keep the GPS metadata on the original photo through their Digital Photo Professional App files. However, when I imported my files on my computer, I applied my own copyright info preset and I accidentally got the box "device info" checked, which did not allow me to transfer all of these GPS metadata on import. I already deleted pictures from my camera, so I'm not able to import photos without this checked.

  How to restore the files on my Lightroom photos GPS data? Or do I go through my photos manually through DPP and translate the latitude and longitude of each photo to get the GPS data?

  Simply 'remove' (do not drive delete) the pictures of the catalogue and re-importation with an "information appliance" unchecked.

• Sudden missing sequence presets

  Can someone tell me why all of a sudden I can't open most of my first stops? When I try to open them, I get the following message: "this project contained a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence. "Projects archived since last year all of a sudden does not open and neither will the ongoing projects. I googled the problem and came across a few solutions, all involving download PC files on someone's private server. Cannot do it because 1) I'm on a device of the Government, and 2.) this device is a Mac.

  It somehow connects to the fact that I use an enterprise version that has never been updated since it was installed last September, NOT once - by my local administrator?

  [Left generic Cloud/Setup forum for forum specific program...] MOD]

  It turned out that my subscription has expired. Unfortunately, CC doesn't give me any message to that effect. How CC is supposed to behave when the subscription ends?

• Configuration of the problem of presets

  I just bought a Brother MFW-L6700DW multifunction device.  When I tried to use Acrobat, he told me he can't set presets with this printer, custom scan or otherwise and makes me scan each page one at a time and set the time of the page each time.  Can someone provide advice on how to fix this so I can use the presets?  Thank you.

  Please try to install the Twain drivers for your printer.

• My mind is wiped out. I'll put up pages in Photoshop 9.0 to be then placed in InDesign 4.0 for professional printing. Can you help me configure the proper color settings, and what PDF preset to use. And output parameters, etc. Thanx.

  My mind is wiped out. I'll implement the color pages in Photoshop 9.0 to be then placed in InDesign 4.0 for commercial printing in book form. Can you help me with the settings of color in Photoshop, that is to incorporate the color profile; convert in space work, Adobe RGB, etc. and which PDF preset to use, i.e. printing, PDF / X - 1 or 3, etc. Also, what I have to select the output settings such as the conversion of colors with the Destination or the printer deals with that. I know I asked a lot, so thanks in advance for any input or advice.

  Best regards, ScottyB34

  What are the settings of your printer wants? Some may deal with sRGB some want Adobe RGB Ctrl/Cmd-Shift-k in Photoshop, then choose North Amercian prepress 2

  He'll take care of the tags for you, or if sRGB is important, Norh American General Purpose 2.

  Here is a summary of the settings PDF and their meaning:

  When you are ready to create a PDF file from an application such as Illustrator or InDesign Adobe, we give you a list of the predefined PDF settings from which to choose. Well how do you decide which is the right choice? Well, let me explain what they do.

  Let's start with the smallest file size and the name of the type of the story. It is compatible with Acrobat 6, which means that anyone who has Reader or Acrobat 6 or above will be able to open the file. Now it converts everything in sRGB color which is a common space for color monitor.

  All RGB is truncated to sRGB, CMYK and spot colors also. So that means if you have a job to print, you can see some color shifts in this outgoing PDF. You must decide whether it is acceptable. He can't stand live transparency, not flattened. It downsize image content to 100 pixels per inch and this is part of how she made a reduced file size. It also uses aggressive JPEG compression of poor quality on the content of the image. So, you can see some of these rectangular JPEG artifacts.

  But it is how it gives you a reduced file size, and results are appropriate to be posted online or attached to an email.

  High quality printing has compatibility with Acrobat 5 and above. There is no color conversion. RGB RGB stays, rest spot, stays of CMYK CMYK spot and it supports live, not flattened transparency. It does not perform some downsampling to 300 pixels per inch. So, for example, if you placed an image which was 300 ppi and then set to scale up to 50 percent there actually a res then 600 pixels per inch.

  Well, this process would take half out these pixels. Therefore, it can create larger files but that makes it suitable for in the House of printing or sending Let's say a remote office if they want to print we tell cells leaves, or brochures, or something like. It's beautiful out on an internal printer.

  Print quality and high quality printing have similar names, so this may be a bit confusing, but print quality has compatibility with Acrobat 5 or higher. It converts the content of RGB to CMYK destination values according to what you specify as the destination.

  It is usually SWOP, S-W-O-p. It supports live, not flattened transparency. It performs the subsampling bicubic to 300 pixels per inch and because that it keeps at least 300 pixels per inch, which means that it can create some large files, but it is suitable for professional printing.

  Then we start to get into the presets named 'X '. 'X' is now for Exchange. They agree on specifications and the idea is to have a set of specifications if a PDF file is compliant to these specifications, we know it's going to be printable.

  We know that imaging devices are going to treat them properly. So this goes back to 2001, and which can seem a bit old, but bear with me. PDF/X-1 has a compatibility with Acrobat 4. I know, it sounds old. It converts RGB to CMYK content, it keeps the content of good tones. It flattens transparency. Downsize it at 300 pixels per inch. It can large enough crat files if you have large size images in your project and that it is suitable for professional printing.

  The idea behind X-1 is if you send a PDF file to an unknown printer, you do not know what are their capabilities, you send abroad, it will be able to be photographed on any device. No matter the age, it is, they can print. Over the years, the concepts of Exchange became more sophisticated the workflow and devices become more sophisticated.

  SP PDF / X-3: 2002, remains compatible with Acrobat 4 and that means that it flattens transparency, but it does not perform any color conversion.

  This means that it maintains RGB content, place remains in place, rest of CMYK CMYK. He still performed bicubic downsampling at 300 pixels per inch, and therefore, it can create large files. But this is suitable for commercial printing, if the printer signals you that it is present RGB content is correct.

  PDF / X-4: 2008 is compatible with Acrobat 7 and later. See, we're getting more modern. No color conversion. RGB RGB stays, stays CMYK CMYK, spot rest spot and it supports live, not flattened transparency.

  He still performs bicubic downsampling. Therefore, it can create large files because it maintains the pieces of the image to 300 pixels per inch or higher and it is suitable for commercial printing, as long as the printer tells you that RGB content is not serious and dynamic transparency is acceptable. Some older workflow does not support dynamic transparency, or they treat well, and that's why always ask. It is a special case in Illustrator, something called default Illustrator. Its compatibility is Acrobat 6 or higher.

  It does not perform the color conversion, everything continues like this. It supports transparency live, not flattened, and it also contains the original, editable Illustrator file in the PDF file. It preserves layers and it may be return, can be reopened safely in Illustrator and it's really the only PDF format you can do with safely. But it can create larger files, because you sort of two files for the price of one, they sometimes get huge.

  So what predefined PDF is Right For You? Well, if you want to send for printing, the first thing you should do is to ask your printer how they want the created PDF.

  They should be able to give you the plug for the creation of the PDF file. They may be able to give you job options files you can simply import and use as your preset target. But if it's a stranger the printer or the printer for some reason any said, well, I don't know, just make a PDF and this happens, well, choose the lowest common denominator to the PDF/X-1 test. Anyone can image that. If it is a more modern printer and up to date, especially if you send it to someone who uses digital presses, PDF/X-4 should be safe.

  I always go back to point one, ask the printer. If you send it as an attachment or you're going to post online, well, smaller size of file is a pretty clear choice. But remember this, you can start with one of these predefined parameters, and you can always edit it to customize your specific needs. So get to know the presets, understand the destiny of the PDF you create, and then make the best PDF that you can.

• Receive the error message of synchronization video on YouTube, but by using the preset first YouTube

  Hello

  I use Premiere Pro to edit video to my YouTube channel for just about a year now.  In total, I made over 200 videos and never run into this error before.  However, on my last two videos, I got an error/warning of YouTube stating "you downloaded a video may have audio/video synchronization problems.» Please to refer to this article for tips on how to fix this problem it occur. "So, I checked my local file and haven't seen any problems with syncing audio and video, and then decided to leave the full download and see if something was off about downloading YouTube.  I watched the YouTube Uploader several times on portable devices and saw that no audio/video synchronization either questions.  My process is fairly simple, I take the .mp4 files, combining with audio .wav and export using YouTube 1080 p HD preset first.

  
  

  It drives me crazy to try to understand what I'm doing wrong here.  The only thing that has changed recently is that I am now on as opposed to 8.0 9.0 (I am a client of creative cloud, I pay $19.99 for the one application).  A test, I exported in fact just a second 20 video file with any audio using YouTube 1080 p preset and received the same error message.

  
  

  Someone please help, I'm completely lost here.  I thank in advance for any help, you may be able to provide.
  

  Adobe has changed the audio engine, but I don't think that should affect the export format/codec. I did a quick export using the preset youtube and looked at using mediainfo, it showed everything in order. the video and audio have the same length and no delay on the audio track. So it may be a false positive, as j.simon says. You can use mediainfo to check yourself if there is something different between export of version 8 and 9. MediaInfo - download

• Problems with audio playback on mobile devices

  Each project we export and reading on mobile device has a problem.

  We hear only audio track 2 off maybe 3 on different projects. Our audio tracks are stacked like this:

  Track 1 - camera Audio / dialogue

  Track 2 - music

  Track 3 - sound design (some projects, not all)

  None are dumb or the solo. Mounting on Windows 7 and using the YouTube 1080 preset for export.

  Someone at - it a problem with this and how to solve?

  This looks like a problem of audio phase, see:

  Re: audio missing on vimeo and youtube

• What is the best preset for Panasonic Ag-AC8P?

  I teach digital video and use Panasonic AG-AC8P. What is the best setting to use for this device? Thank you

  If you're on the CC14 version, simply drag your images in the project window in the Timeline to create a corresponding sequence.

  Or choose a preset in the section of AVCHD. Make sure framerate and fields match.

• Is it possible to export or save my 5 Lightroom presets and keywords/tags on an external storage drive before a wipe program and data because of a corrupted registry? Thank you.

  Is it possible to export or save my 5 Lightroom presets and keywords/tags on an external storage drive before a wipe program and data because of a corrupted registry? Thank you.

  See these instructions for how to move your computer to a new LR and copy things to a backup device until your computer is reformatted, you reinstall LR:

  http://www.lightroomqueen.com/how-move-Lightroom-to-new-computer/