Photosmart 2610 won't install on windows xp Pro 64-bit

Similar Questions

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• 5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit.  "Problem retrieving some files.  Check space abailable, etc.. "Worked OK on Windows 7 64 bit.  400 GB of available space.

  5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit.  "Problem retrieving some files.  "Check available space, etc. and the privaleges of Scripture on the destination folder. Worked OK on Windows 7 64 bit.  400 GB of available space.  Tried changing the compatibility of Wiindows 8 and 7, but same problem.  I am the administrator, so there should be no problem of privileges.

  Clear your tmp folder.

  Restart your computer

  replace.

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart Wireless e-All-in-one printer - B110a install on Windows 8 pro (64-bit)

  Hello

  I am trying to install the appliance above on my new laptop computer.

  Island firewall and AV are disabled, and I have downloaed the latest installer of Hp.

  the software does and that he sees the device, but towards the end of the installation (after picking if its usb or wifi (wifi), he stopped for a second, and then opens a screen saying:)

  Printer installation has not completed.

  Click Retry to try to reinstall the printer, or click next to continue the installation without connecting to the printernow, it will install later.

  Retry gives me the same message. Then comes ends the installation.

  I caraa complement thew indows printer from the printer section, but the hp Solution Center will not work because it cannot find a dev ice slider.

  How to get the installation to work, or get the solutions Center to see the device?

  Thank you

  Hi Travis. It still does not work.
  Took the plunge and erased from my HARD drive and reinstalled Windows 8 pro. Tried to install the HP software after installation. EVERYTHING IS OK.

• Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

  Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

  @JCL9

  Here you go...

  Your Web site Support Page printer - and full functionality Softaware for Windows 7:

  All-in-one printer, HP Photosmart C6280 range

  Help, information and examples:

  Install the full features software - printer

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• installation of windows 7 pro 64-bit will not complete installation. clean install.

  I tried to install windows 7 pro 64-bit and I got all the way to the last part of the installation and the screen goes black for 5 minutes approximately and restarts. then he tries to run windows and the screen becomes black and black rest for at least 30 mins +... is when I gave up on it. What can be wrong? I have overcome all the req and even tried 2 games of motherboard and processor and came to the same problem. I think it's a bad dvd but the store won't Exchange it. They let me just go back. then before I have to send back tomorrow I figured I would give it a try more.

  at this moment I have amd athlon 64 3800 + and 4 GB of ram and I also tried a quad core from amd phenom 2 and 6 GB of ram with the same result.

  Joe can you be more specific, what stage the installation goes on black screen...?

  I had a same problem once and there is a possible resolution to do so,
  If it is in the final phase of installation is mainly due to the video card..,.
  Then restart the computer and keep tapping F8, select "enable Mode low resolution" because the option and now the installation program will continue...
  see if it progresses and ends with the installation by inviting you to enter the user name and password then your product key.
  Once you have finished with these steps and that reach you your office update your video card driver and restart the computer.
  Hope it will work for you :D
  Please let us know if it works :)

• I would do a clean install of windows 7 Professional 64 bit in my hp probook 4540 s

  I would like to do a clean install of windows 7 Professional 64-bit in my hp probook 4540s.after install exactly what are the necessary to install drivers and whence? Thank you

  Hello:

  Here is the link to the support page and drivers for your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&prodTypeId=321957&prodSeriesId=5229455&swLang=13&TaskID=135&swEnvOID=4059

  Now, we can tell you exactly what drivers to install the adapter wireless because he could be one of several models installed in your laptop.

  You must install the following drivers in this order.

  Chipset: Installation and reboot

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105389-1

  Video: How to know what graphics card is in your notebook (AMD or Intel). Install and reboot.

  Audio: Installation and reboot

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106423-1

  Wired network:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105307-1

  Then these are the drivers, I know that you will need:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105298-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-104954-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-104949-1

  Paul

• HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

  Hello

  For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

  

  When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

  This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

  That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

  So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

  [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

  [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

  Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

  HI Varadar,

  You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

  Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

  What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

  I hope this helps,

  Charles

• How to do a clean install of Windows 8 Pro (x 64) without the bloat-ware?

  I just got my W530 but its no fun to use it until I made a correct installation.

  How do a - clean install - of windows 8 Pro (x 64) without the bloat-ware that are on the recovery discs?

  As I read I need an ISO file but which I expect and where?

  
  

• Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

  Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59664.exe

  Another option: click on the following link and click Search now :

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5306751#N2316

  Kind regards.

• How to install Skydrive Windows application for 32 bit Win XP?

  How to install Skydrive Windows application for 32 bit Win XP?

  You do not have.  Like the Skydrive page will tell you, that Windows XP is not supported by the software.

• I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to

  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.

  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to
  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  Relax and breathe.

  FIRST: Uninstall IE8 and IE7 if they are installed.  Back to all the way back to IE6.  You want other patches before you get those.  Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• Install windows xp pro 32-bit on pc that is already running Windows XP pro 64 bit. Product key does not work

  I have a windows xp pro 64 - bit PC. I would like to install windows xp pro sp3 32-bit. This is a PC that was used in our Engineering Department and now will be sent to a standard user in our society. I went through the installation and when I enter the product key on the COA label a message that is not valid. Do I need a different product key to install the 32-bit version of XP?

  A Windows XP 64-bit product key will not work with Windows XP 32-bit installation media.  You would need a genuine Windows XP 32 - bit product key. Carey Frisch

• Windows 8 Pro 32-bit install in Vista 64 Bit Machine

  I have a HP dv4 laptop with Vista 64 installed... You want to install Windows 8 Pro 32 bit on this computer, when I try to guard asking for the 64 bit Win 8 disk... how to replace this...

  Hi Roger,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, you have problems with the installation of 32-bit Windows 8.

  The Architecture Cross upgrade is not possible. This means that you can not upgrade to Vista 64-bit for Windows 8 32-bit. However, you can perform a new installation of Windows 8 32-bit.

  Note: Make a backup of all your data on an external hard drive, as new facility will result in the loss of data.

  Meet us if you encounter any problems during the installation of Windows 8 32 windows little or any other issue, and we would be happy to help you.

  Good day!

  Hope this information helps.