Press does not is to say double touch works do not enter

Similar Questions

• The press does not not - Satellite Pro A300

  I just turned on my laptop after a day of not to use and the touch pad does not work properly.

  Every time I try to move the mouse goes in all directions and starts to clicking on things when im not and highlighting and dragging things all the time when trying to move the mouse somewhere.

  Its as if he has a clean mind.

  Anyone know what is the problem with it please or do I have to just get a new one?

  Hello

  What laptop you have and what OS is installed?
  Have you tried to update or reinstall the driver of the touchpad?
  If it isn't-> do this!

  On the other hand, a hardware problem (touchpad, keyboard) might be possible.
  One of my friends had a similar problem. The touchpad does not work and the cursor jumped all the time left and right
  It was not possible to mark anything on the desktop of the technician said that there is a malfunction of the keyboard and it replaces

  It's a key.

• 8600 does not enter mode tray 2 when Tray 1 empty

  I have a premium of 8600 officejet Windows 8. When I print and Tray 1 is empty, my tray by default, the system does not go to the tray 2 but so called ' paper '.  I have no blocking of the status bar. How can I get the system to pull the tray 2 in 1 is empty?

  My first recommendation is that you visit this Web site and make sure the firmware is updated, also I recommend to uninstall and reinstall the drivers for this Web site as well as another method. In addition, if you have no more paper in the tray first and you try to make a copy directly from the machine, what is?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4323659

  Let me know and I'll get back in touch with you!

  -Spencer

• The debugger does not enter orders

  Hello
  I have a stored procedure. Here's part of it:
  
  IF (v_BANKID = ") THEN
  BEGIN
  OPEN cv_1 for SELECT SYSDATE FROM DUAL;
  END;
  
  In the debug mode when I walk through the debugger commands does not open cv_1... the part as if the v_BANKID parameter is empty, where in fact it is not. What is the reason for this? I use SQL Developer.
  
  P.S. The Select statement's nickname. The real is larger. But it does not matter which statement is here.
  
  Published by: Mikhail on February 6, 2012 12:53 AM
  
  Published by: Mikhail on 6 February 2012 21:57

  >

  IF (v_BANKID ") THEN

  What does that mean?
  What type of data is v_BANK_ID?

  If you want to say

  v_bankid = ''
  

  then it is equivalent to

  v_bank_id = null
  

  which is never true.

  You must use

  v_bankid is null
  

  Published by: Jim Smith on February 6, 2012 11:59

• message. Text = ""; Does not enter after tank in a hurry

  After you press enter in a message box, the message.text = "" does not remove the tank from the entrance of the message box. " No idea why? Thank you.

  Message.addEventListener (KeyboardEvent.KEY_DOWN, handler);

  function handler(event:KeyboardEvent)

  {

  if(Event.charCode == 13)

  {

  If ((Message.text) .length > 0)

  {

  client_nc. Call ("msgFromClient", null, Message.text);

  Message.Text = "";

  }

  }

  }

  KEY_DOWN has replaced by KEY_UP.

• I have a genuine copy of Windows xp professional that I bought, when I enter the serial number it does not enter the letter "N".

  I have re-formatted a computer for my friend, boiught a genuine copy of windows xp pro, but when I have bin and enter the serial number on the last block of numbers it will not enter the letter "N", so I can't validate the copy I have... why?

  I tested the keyboard and the letter "N" works perfectly

  N is a character not allowed in the Windows product key - check the label again.

  Where did you purchase this license?

• Press does not not on Ideapad 500-15

  Hi people

  I have a brand new 500-15 i use in recent weeks.

  Today, the touchpad has stopped working. An external mouse works fine, but nothing on the touch pad. I rebooted as well - but it did not help.

  Can anyone suggest what can be done?

  (I actually get disappointed with this high-end laptop... I had problems of graphic drivers as well, that I had to bring myself)

  Hello

  Yes, it's the 500-15ISK

  I really did not solve it, but after trying to update the drivers manually by using what has been on the Lenovo site, then fron Synaptics site - I finally solved this problem to roll back the driver and then auto-updated drivers, and then she returned to the lif

• Wireless Notebook Presenter Mouse 8000 does not enter pairing mode

  I replaced the batteries in the mouse, and now I can not place the mouse in pairing mode.  When I turn the mouse on the green light is on continiously.  When I press the button of twinning on the mouse it alternates with a flash no matter how long I hold the button for red/green.

  Any ideas?

  Hello
   
   
  1. have you checked this mouse on another computer?
   
  First of all I ask you to download and install the latest version of the IntelliPoint 8.0 for Windows 7 software. Here are links to the software.
  For 32-bit operating system.
  http://download.Microsoft.com/download/1/3/B/13B6BCAA-603C-4F7C-B03E-2DC23E307D47/IPx86_1033_8.0.225.0.exe
   
  For 64-bit operating system.
  http://download.Microsoft.com/download/F/F/2/FF20250F-0C25-4139-BCAD-CFC5EABFA159/IPx64_1033_8.0.225.0.exe
   
  Here's how you can do it.
  a. remove the device from Bluetooth devices.
  b. turn on the mouse and select "Add Device".
  c. immediately after selecting "Add Device" push the Bluetooth button on the bottom of the mouse (must flash red/green on top).
  d. move the mouse as I used it (probably 10 seconds or more) until the mouse showe up as a new device in the window add the device.
  e. notification of automatic driver installation will pop up.
  f. should be able to use the mouse now.
  
  Also, see installation and configuration information in the article below.
  http://www.Microsoft.com/hardware/mouseandkeyboard/IntelliPoint/Readme/en-us/default.mspx#installation
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• iMac does not enter sleep mode

  Hello

  My iMac will all of a sudden not more "standby". He worked for a long time without problem.

  MAC OS: OS X El Capitan version 10.11.5.

  MAC: iMac mid-2010 27 "

  FileVault is turned on.

  What I tried:

  1. Fix disk problems (first aid function)
  2. Discount to zero NVPRAM
  3. Reset the SMC
  4. The repaired disk permissions
  5. Restarted several times
  6. All updates are installed
  7. Update firmware (interface EFI)

  Hypernation is set to the standard. Value = 0 (not changed)

  Yes, it worked well with active FileVault. If this isn't the problem.

  The computer will not be simple go to sleep or self according to setting Energy or actively by selecting mode 'sleep'.

  In the console of the system log, I constantly see these errors when the iMac try to go to sleep:

  06/18/2016 19.15.21,941 WindowServer [311]: device_generate_desktop_screenshot: authw 0x7f8ecc869c00 (2000), shield 0x7f8ecc0ab000 (2001)

  06/18/2016 19.15.21,941 WindowServer [311]: device_generate_lock_screen_screenshot: authw 0x7f8ecc869c00 (2000) [0, 0, 0, 0] shield 0x7f8ecc0ab000 (2001), dev [2560,1440]

  06/18/2016 19.15.22,068 WindowServer [311]: no sleep for WillPowerOffWithImages image

  Especially the last of them worry. And there is no/private/var/vm files if it must be that.

  Is there a simple and understandable way to solve this problem. Don't just suggest to just turn everything off as he worked and I did not change any settings.

  I have the console of the system there is also a lot of errors/warning on Itunes if it could be linked to the issue:

  18/06/2016 19.15.39,437 iTunes [738]: entry: _AMMuxedDeviceDisconnected, mux-device: 76

  18/06/2016 19.15.39,437 iTunes [738]: entry: _AMMuxedDeviceDisconnected, mux-device: 71

  18/06/2016 19.15.39,449 iTunes [738]: entry: __thr_AMMuxedDeviceDisconnected, mux-device: 76

  18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - Mux ID not found in the mapping Dictionary

  18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - handle cannot disconnect with invalid ecid

  18/06/2016 19.15.39,450 iTunes [738]: entry: __thr_AMMuxedDeviceDisconnected, mux-device: 71

  18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - Mux ID not found in the mapping Dictionary

  18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - handle cannot disconnect with invalid ecid

  18/06/2016 19.15.39,454 com.apple.xpc.launchd [1]: (com.apple.dpd [5986]) Service came out with abnormal code: 75

  18/06/2016 19.15.39,000 kernel [0]: PM response has taken 100 ms (81, coreduetd)

  This found ID of MUX is here for a long time.

  Please launch the built-in activity monitor application and select the Select power tab

  Discover ▹ all processes

  in the menu bar, if it is not already selected. Also select

  View columns ▹ ▹ prevention of sleep (or assertion of power)

  Click on the header of the column preventing sleep to sort the table of process. A process which, if any, show Yes in this column?

• Satellite Pro M30: Computer does not enter standby mode

  Hi all

  I have a Satellite Pro M30...

  When my computer is in stand-by or is closed, the first keeps flashing orange led and it refuses to start. It reboots only when I unplug the connection and remove and replace the battery several times...

  Anyone knows what is the cause of this and what is the long-term solution?

  Longesson...

  Hello

  As far as I know the light glow orange or flashes while the battery is charging. If it of impossible to turn on the device while the battery is charging so in my opinion, there is something wrong with the electronic power to your laptop.
  You should contact the service partner for help.

  Good bye

• MFP HP PageWide 377dw: 377dw PageWide MFP does not enter into standby

  Hello

  For the first day or so my new 377dw printer PageWide MFP went to sleep and woke up as necessary without any problems.

  Now, he is never past in standby, but remains fully 'on' all the time.

  Yes, I tried turning off and back on.

  I also tried different sleep time settings using both the front panel and the built-in Web server. No matter what I try it is sitting here awake all day.

  Any suggestions?

  Glyn.

  Hello Glyn,

  Is it connected to the line phone yor?

  You can see any difference by disconnecting the cable from the phone to the MFP?

  If so, I suggest to try a different phone cable or check a different telephone jack and check for the difference.

• Photos does not detect iPhone

  I've recently updated my 2010 MacBook Pro at El Capitan (10.11) and several problems with the forced migration in iPhoto for pictures.

  Previously, I've kept my iPhoto on a HDD library external Western Digital. Yesterday, I threw some Photos while holding down the Option key and imported all my photos in the iPhoto library on disk external HARD in Photos.

  Now I would like to import photos from my iPhone 5s in Photos. When I plug my phone into my laptop with a USB cable, however, nothing happens. Photos do not show my phone, still less the opportunity to import pictures of her. I tried a soft reboot of my iPhone, but that has not changed anything. I don't think I have iCloud sharing to set up Photos, nor what I want.

  Thanks much for any help.

  Previously, I've kept my iPhoto on a HDD library external Western Digital. Yesterday, I threw some Photos while holding down the Option key and imported all my photos in the iPhoto library on disk external HARD in Photos.

  What size is the drive

  Exactly what you were doing - launch while the option key is pressed does not matter or move whatever it is - it just gives you a window to select another library or start a new library is empty

  LN

• Microsoft MultiMedia 1.1 wireless keyboard does not work - Windows 7 64 bit

  Keyboard does not work.  Does not enter any data.  Battery is good, the wireless signal is good.  Tested on another computer and does not work there either.  Tried to uninstall, reinstall and checked for driver updates. Original installation disk is incompatible with Windows 7.  Message says device is working, but the keyboard is "dead."

  Appreciate the suggestions, pls.  TX

  Not a good sign that it does not work on another computer. Go to control panel > devices and printers. If the keyboard doesn't appear as an installed device, think of it as dead and buried.

  Windows identifies devices of small IC boards inside the devices and guess they are ok. Windows cannot do is determine if the keyboard membrane makes contact with the small IC Board...

• Firefox does not attempt to remember the passwords even if I click the "Remember" button and I didn't erase the passwords etc. memory of passwords

  Security is set to "remember passwords" and privacy settings does NOT erase passwords. When I go to connect to a site of the bubble 'Remember password' is displayed, but does nothing when I click on "Save password". He hang around for a few seconds then disappears. When I come back on the Firefox site does not enter my username and password but still asking if I want to remember the password.

  If starting in safe mode fix then try this:

  It is possible that there is a problem with key3db and signons.sqlite files that store the encrypted names and passwords in Firefox.
  
  Rename signons3.txt and signons.sqlite files in the Firefox profile folder.
  
  You can add .old files (key3.db.old and signons.sqlite.old) names or move them to another folder to make it possible to cancel the action.
  
  You must define a new master password after renaming or removing the signons3.txt and all the currently saved passwords are lost.
  
  If that worked, then you can delete the renamed files that are no longer needed.
  
  
  
  See:

  • "Troubleshooting" in http://kb.mozillazine.org/Password_Manager

• CUCM 8.6, one of the admin page is displayed incorrectly and entry way does not work

  Hello guys!

  We have CUCM 8.6.1 (single node). All pages work fine except one - adding gateway h323.

  Page shows the parameters instead of domain names (see attached). For example gatewayH323.name instead of the name of the unit; gatewayH323.description instead of the Description and so forth...

  Also does not enter in text fields.

  We see this image in all browsers.

  Restart Tomcat and Admin Web services did not help.

  Any thoughts? Probably in trouble of DB?

  ARO

  Michael

  Hello

  Could be the bug.

  Impossible to add or change the gateway h323 gateway/device on page

  CSCtq96181

  Description

  Symptom:
  Cannot add or change a H.323 gateway on the Gateway Configuration page in
  Cisco Unified CM Administration.The text fields do not allow the addition of the new text. Field labels to use variables instead of the correct field
  names. Conditions:
  CUCM 8.6.1.10000 - 43 when you try to add or change an H.323 gateway. Workaround: Problem is solved in 8.6(1a), build 8.6.1.20000 - 1. If cluster was installed with 8.6 (1), 8.6.1.10000 - 43 construction. Installation of
  ciscocm.gatewayH323.cop.sgn, on all nodes, will solve this problem. Other alternatives: the SIP or MGCP instead of H.323 gateway configuration.
  AXL to add the H.323 of CUCM bridge.

  Known affected releases:

  (2)

  8.6 (1.10000.43)

  1,000