The debugger does not enter orders

Similar Questions

• Debug the device - missing .debug files - debugger does not slaughter

  Hello world

  I'm trying to debug on my bold 9700.

  If I attach the debugger to the jde to my device through debugging--> join to---> Pocket I can see debug messages in the output window of the jde. But the debugger does not stop at breakpoints also I get error messages while the debugger is endearing to the device. Missing files 'net.rim.cldc' etc.

  Searching the Internet has proved I have the specify a location where the debugger can find the ".debug" missing files.

  I hope someone can tell me where to download these files f *. I'm tired of searching...

  Thanks in advance

  Harry

  Hello. Debug files are provided with BlackBerry simulators, so you can install a BlackBerry Simulator that corresponds to your version of BlackBerry device software.

  BlackBerry simulators can be downloaded here: https://www.blackberry.com/Downloads/entry.do?code=060AD92489947D410D897474079C1477

  Best regards, Dmitry.

• Debugger does not stop at breakpoints

  The debugger does not stop at breakpoints for most of my applications.

  I also created two new projects using the templates provided to Hello World, for a project, that it stops on my breakpoinbeing the first line to the breast

  ApplicationUI::ApplicationUI () :

  QObject()

  Sometimes, for the second project he doesn't stop... very frustrating.

  I tried this on two separate devices, either via wifi either by using the USB connection.  I'm running this on a new thinkpad with tons of ram and an ssd, Os is Windows 8.11 and I installed the 64-bit version of momentics...  I also tried to use the SDK 10.2 and 10.3 with the same results...

  Very strange, I copied the project in another directory and then it re-imported in the workspace and then debug started working again.

  Must have been a thing of directory permissions.  in any case, I just wanted to post the resolution of other interests of peoples...

• Debugger does not stop at breakpoints for some applications

  The debugger does not stop at breakpoints for most of my applications.

  I also created two new projects using the templates provided to Hello World, for a project, that it stops on my breakpoinbeing the first line to the breast

  ApplicationUI::ApplicationUI () :

  QObject()

  Sometimes, for the second project he doesn't stop... very frustrating.

  I tried this on two separate devices, either via wifi either by using the USB connection.  I'm running this on a new thinkpad with tons of ram and an ssd, Os is Windows 8.11 and I installed the 64-bit version of momentics...  I also tried to use the SDK 10.2 and 10.3 with the same results...

  Very strange, I copied the project in another directory and then it re-imported in the workspace and then debug started working again.

  Must have been a thing of directory permissions.  in any case, I just wanted to post the resolution of other interests of peoples...

• After hiighlighting a Word and paste it into another document, the Clipboard does not; When I hit enter again and again blocks. How should I do?

  When I select a word or phrase and copy to the Clipboard, then paste it into another area of the Clipboard does not erase the expression. Therefore, every time that I type and press the Enter key it continues paste the sentence throughout my document. I have the latest download of Firefox are installed (16.0, win 7 and that's when it started.) How to stop this heinous behavior so I can type a sentence with normality?

  Louise

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  The problems of Firefox using Firefox SafeMode

  When in Safe Mode...

  • The State of plugins is not affected.
  • Custom preferences are not affected.
  • All extensions are disabled.
  • The default theme is used, without a character.
  • userChrome.css and userContent.css are ignored.
  • The layout of the default toolbar is used.
  • The JIT Javascript compiler is disabled.
  • Hardware acceleration is disabled.
  • You can open the mode without failure of Firefox 15.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• CQ60-104tu: a, s, d, f, j, k, l, enter the key on the keyboard does not

  I shut down my pc in working condition but when I turn the next morning some keys not working, row of the Middle exapt g & h all the keys does not, (a s f d j k l; enter) a s d work, but I have to press more n longer and pressing lasts.

  I tried unistallation of the keyboard driver and reboot but no improvement. is this hardware or software problem?

  1 buy a new a 2. shipped it to you and 3. install it. Where are you located (country?) is a UK English keyboard, right?

  This is the part you need:

  For use in the United Kingdom 496771-031

  Your Service Manual:

  Manual

  For instructions, see pages 17-4 to 4-19. If you prefer the video:

  https://www.YouTube.com/watch?v=-8xp89IIao8

  In the United Kingdom, looks like the keyboard is about 20 pounds:

  http://www.eBay.co.UK/ITM/HP-Compaq-CQ60-G60-laptop-keyboard-496771-031-UK-layout-/161139740069?PT=LH_DefaultDomain_3&hash=item2584ad4da5

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I can't tp perform actions on email or some Web sites because the pointer does not change from a helping hand on all orders at the top of a page - any more down works fine

  In Hotmail, for example, I can open any message in the Inbox except the top one, but then I am unable to answer or to take further action because the symbol of the pointer does not change from a helping hand and clicking on has no effect.

  If I try to open the top message from the page by clicking on the command "Open" is gray.

  If I open the type of web page that has a number of menu items at the top of the page, I can't open anything either for the same reason - something more to the bottom of a page is fine. The type of Web site with menus on the sides can be used for all items except the top menu!

  Help!

  Concerning

  Brian

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported because of this problem. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Unfinished system recovery - the computer does not start

  I have a laptop Packard Bell EasyNote who was running slowly and decided to do a restore of the system using a restore CD I created for it (no disc has been provided by the vendors, some instructions on how to create a). In order to start from scratch, I decided to do a full restore, which means wipe the existing drive. I booted from the restore CD and everything seemed to go well until part way through it asked me to insert disk 2. I don't have one of the drives. Now, the system does not at all - it comes up with an error that BOOTMGR is missing and hangs up. I don't know what to do now. I tried searching for downloads on the site of PAckard Bell, but apparently not my particular model from the list. I tried to look on the Microsoft Web site, but it does not seem to recognize the product identifier on the Microsoft label on the base of the laptop. I don't know what to do to recover a working laptop.

  I have a laptop Packard Bell EasyNote who was running slowly and decided to do a restore of the system using a restore CD I created for it (no disc has been provided by the vendors, some instructions on how to create a). In order to start from scratch, I decided to do a full restore, which means wipe the existing drive. I booted from the restore CD and everything seemed to go well until part way through it asked me to insert disk 2. I don't have one of the drives. Now, the system does not at all - it comes up with an error that BOOTMGR is missing and hangs up. I don't know what to do now. I tried searching for downloads on the site of PAckard Bell, but apparently not my particular model from the list. I tried to look on the Microsoft Web site, but it does not seem to recognize the product identifier on the Microsoft label on the base of the laptop. I don't know what to do to recover a working laptop.

  Hey Pete Skett

  problem with the packard bell recovery media, or how it was made by yourself you will need to contact them for support

  It's their recovery process and the media

  http://IL.PackardBell.com/PB/en/IL/content/support

  I suggest that you ask them to send you a set of vista recovery disks that they should have for a nominal dollar cost and also ask them if you have a recovery partition on your hard disk to perform a recovery to factory standards

  If you have a recovery partition, it will save you money

  You can press F11 on startup to see if you can enter the recovery partition recovery process, if you still

  Ask packard bell for the correct key sequence

  Walter, the time zone traveller

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• inside the host does not ping external host in transparent mode

  Hi all I need urgent help on this pls I have host on ip add 1.1.1.2/24 connected inside interface of the pix with ios 7.0 in transparent mode. and the external interface of the pix connected to a router IP 1.1.1.1/24.i enabled icmp inspection.i can see the router arp entry into the host and the host arp entry in the mac address router.both are well learned by the pix. no traffic flow form the host to the router. There is no access on the pix of pix.the list does not create an arp entry in the stange very pix. I tried to manuaaly add the entry:

  ARP in 1.1.1.2 0011.d80d.f6ac it gives an error <1.1.1.2>not allowed. network address I do not get it .my question is why the pix don't is not create entry arp. what could be the problem. could someone pls help me with this thanks pls.

  Assane

  Lol this is not as you mentioned. I'll explain the communication all in detail. I hope this helps.

  Assumptions:

  PIX configured to L2, with outside as 0 and inside as 100. insidehost on inside the network and external network configured outsidehost.

  scenario 1

  ==========

  If pix is not configured with the IP address, all IP packets are dropped and syslog Id 322004: no management IP address configured for transparent

  Firewall is saved. So lets see how communication works on L2

  outsidehost tries to communicate with insidehost. ARP request is from outsidehost and is sent through dissemination and it is received by PIX and sent to the inside network, without change.

  Return of InsideHost and the response is sent through to the outsidehost. When you see the arp on the outsidehost and the insidehost entries you will find the corresponding arp entries.

  PIX will forward arp request/reply.

  You can give the command "local host" and you won't see any entries created on the box.

  2nd scenario

  ==========

  An ip address is configured on pix and insidehost starts communication with the outsidehost. Communication is from top to bottom and will allow pix.

  No change in the behavior of the ARP. Exactly as mentioned in scenario 1.

  Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from insidehost to outsidehost.

  Connection between outsidehost and insidehost is denied because there is no access list to allow traffic from low to high.

  You can give the command "local host" and you will see the entrance to insidehost, outsidehost.

  3rd scenario

  =============

  An ip address is configured, created in order to allow the circulation of outsidehost insidehost and applied to the external interface of access list access list.

  No change in the behavior of the ARP. Exactly as mentioned in scenario 1.

  Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from outsidehost to insidehost.

  Access list being present to allow the traffic, the connection is allowed and entry is created in the box.

  Hope that the foregoing erases the entire communication L2 and the communication of different security levels.

  I hope this helps.

• Unable to boot to the desktop does not work auto repair

  I recently updated my windows 7 to windows 8 and now the PC is stuck in a loop of auto repair of windows 8. The PC does not the same page and there is no way to start the PC in safe mode (as you can when you get a virus). The repair just doesn't work.

  I have read various other forums (and it seems that this is a common fault) and I tried all the things suggested on the command screen but none of them work.
  Anyone know how I can fix this without losing my personal data - I have over 10,000 photos on the PC and do not want to lose any of them. So I really don't want to uninstall it and wipe the data.
  Help, please!
  Thank you

  Separated from the:

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/Windows-8-stuck-in-automatic-repair-loop-help/456ca2a5-e9c2-4197-9087-a179384e92e7

  Andrew B. salvation,

  Thanks for the reply with more information.

  We have of Windows 8 installation media or create an installation media.

  Once you have the disc, follow the steps above and try to rebuild the configuration Data (BCD) start.

  Note: If the computer is newly purchased, it would be preferable to contact the computer manufacturer to address this problem. (If during the warranty period).

  Here are some measures that could help solve this problem.

  I suggest you to rebuild the BCD (Boot Configuration data) fromcommand line and check if that helps.

  1. Insert the installation of Windows 8 media and start the computer using the disc.

  Note: You will need to consult the computer manual on how to set the CD/DVD drive as the first boot device in the BIOS.

  2. Once you start using the installation disk of Windows, on the installation of Windows 8 window, click on repair your computer.

  3. click on Troubleshooting and Advanced options. Select command prompt. Enter the following commands to four in the command prompt.

  Bootrec /fixmbr
  Bootrec /fixboot
  Bootrec /scanos
  Bootrec /rebuildbcd

  Once the order is complete, restart the computer.

  Hope this information helps.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices &amp; their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Some records are not in my list of bookmarks; the individual bookmarks can be found in the search, but the record does not show.

  Some records are not in my list of bookmarks; individual bookmarks can be found in the search, but the folder does not appear in the list of bookmarks, and results do not indicate where the individual bookmarks.

  You can use an add-on to display add a column to the Library dialog box for the folder of the bookmark.

  https://addons.Mozilla.org/firefox/addon/show-parent-folder/

  The extension can indicate only the name of the folder or you can view the full path via the menu in the folder. This full path option is useful if a file accidentally gets you drag somewhere in order to explore the it and find it.

  To access the settings of the extension, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, find the Options button under the specific extension.

  A little luck?

• using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

  We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  I hope this helps!

  Curtis

• The food does not contain an image valid podcast.

  Hello

  I asked this question before and the control point was that the image is in https. We addressed it now and the image is http, but I always get the error the food does not contain an image valid podcast. Podcast images must be at least 1400 x 1400 pixels.

  Flow validates correctly as well, although when tested in iTunes, the episode does not show.

  Here is my feed - http://feeds.feedburner.com/accenture/stagemanual

  Thanks in advance.

  I checked in the Podcasts connect and the error is not with the image, but it complains that it cannot download episodes of your EDI. This is because the URL of your media file is

  http://link.videoplatform.limelight.com/Media/?Mediaid=01bc098836b64009915f2aa89 00aa4ab & amp; width = 480 & amp; height = 321 & amp; playerForm = player

  It is a Flash drive. You can't use a player incorporated - you must provide a direct link to the media file. and it's not Flash. For video, it must be .m4v, .mov or .mp4. The file should play in a browser when you enter the URL, not force a download or appear in a player.