Press the scrolling issues after a clean install of 7.

Similar Questions

• Can I reinstall an app that I bought from the app store after a clean install of El Capitan?

  Hi all

  I did a clean install of El Capitan, which made my 2011 macbook pro currently unusable.

  A few days after installation I met problems I've ever had before. Baffled because since my drive hard worked completely fine with the Mavericks and Lion. No disk ever utility error. Computer froze a couple times the 5 years ive had the it. It has been stable.

  I explained my failed attempts to solve this problem in another thread here.

  So, if this is not relative, which seems to be caused all of this, I concluded it's a failing hard drive?

  My question is the only program of value I have logical hard disk Pro X (bought and downloaded 3 days ago) so anyway, given my problems with the hard drive I have can always reinstall logic after I got a new drive and reinstalled OSX?

  I'm on a PC at the moment and looked everywhere to find my purchase history of Logic Pro X. The only thing I can find official is my receipt by e-mail. I logged on the apple.com site with my Apple ID and it show nothing bought for the last 90 days. Active iPhone and cant find a purchase history. This suggests to me that you need to check on a mac on the App Store?

  Yes. You will need to check and it redownload via the Mac App Store with the original ID of Apple.

  (139819)

• Not able to install the HP software after a clean install of win7, hpbi and harddisk.dll error

  Hello

  I bought a tm2 with win7 home x 64, my IT guy at the office have installed win7 ultimate x 64 and of course all the HP software was missing when I returned. Fortunately, they recorded the old files and I was able to locate the SwSetup folder and managed to install essential drivers.

  However, I miss all the HP software, which means that I can no longer find it not in the SwSetup folder or it will not be installed. I found the HP Touch Smart 'something' Center (folderHPTSLC) but I get the error "hp\bin\hpbi" and I found the Recovery Manager win7 HP homepage, but I get the error "hardDisk.dll.

  I am really a bit upset that I have to spend so much time to solve a simple problem, I have an intact recovery partition, a partition HP tools intact as well as all the files in the SwSetup folder, how can it be difficult?

  I want the software I paid and so far, I spent several hours looking for a solution to a seemingly simple problem (just provide the software on your hp, or at least one that reinstalls the Sw from the hard drive to the HP computer if you fear that your software may be used on other HP computers...).

  Can someone please provide me with is the solution to the problems mentioned above, a link to the HP Touch Center application work (although I have the files, he just moved there) or tell me how I can restart the installation of the HP software and driver that happens just after you have configured your win7?

  Thank you

  Geen

  I agree, our IT screwed up guy, they didn't even know the upgrade thing... :-/

  In any case, I found a way to install the software I was looking for, just unzip to a folder and run the .msi file in the src folder.

  Even if not all the applications had such a record, most of 'em had.

  After playing with the sw a bit, I realized that I didn't like it anyway, boy I'm glad, I wasn't going to come home!

  and btw, we bought a HP Mini and it was a nice little software, called AppInstl in his swsetup, actually just the sw file I was looking for. Of course the same thing happened with the Mini ('clean' installation), but with this app, that I managed to re - install all the sw I wanted without any problem, except QuickWeb, of course, but that seems to be a general problem.

  Seems to me that HP has also seen the need for a "easy install your software after clean install" app.  :-)

  Thanks for all your comments, my problem was solved!

  Rgds,

  Geen

• HDMI issues after a clean install of Windows 7 on laptop HP 2000-2c29WM

  My mother bought a laptop of HP 2000-2c29WM of Wal-Mart with 64-bit Windows 8 is installed. They asked me to install Windows 7 on it, so I did a clean install and have all the drivers available for the PC and the Device Manager indicates that all the drivers are correctly installed and up-to-date. All updates have been applied and everything, except HDMI and VGA ports are working properly. Please help because I am at a loss to know how to solve this problem. I am including the PC model number and product as well as the operating system it is running. Any help or advice would be greatly appreciated! Thank you!

  Hello:

  Have you installed the driver amd chipset and graphics driver amd?

  First install the amd chipset driver and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then, download and install the graphics driver AMD Mobility Catalyst beta from the link below.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

• After a clean install of Windows 7 pro on the Pavilion dv6-6147tx I have no access to the Universal USB po

  After a clean install of Win 7 pro on Pavillion DV6-6147tx I have more universal access to USB ports.  I can't find a driver to download HP downloads or disk 3 recovery disc. 3 USB ports o.k.

  I finally solved my problem of usb 2 with a NEC driver downloaded from HP believe it or not... He took a large sum oh hunting via other websites. My contact with the HP service is a waste of time.

  The pilot is SP47677. EXE from HP, it does wonders, but it does not appear on a search in the HP website.

  I solved my problem.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BaseSystem.pkg.1518yN2yy file after a clean install of 10.5 - 10.5.8

  Hello

  After a 'clean install' 10.5 before moving on to 10.5.8 on my iBook to friends, I was left with this issue what a guess would be called the root folder. (Macintosh HD)

  (The folder that contains the Applications, library, system, and users).

  It is named BaseSystem.pkg.1518yN2yy that he holds 12.7 MB worth of material...

  I was wondering if everything I do with this file?

  I remember reading once you can remove it, but others have posted to leave him alone.

  Before giving my friend returned his computer, I would like to know if everything I do with this file.

  Thank you for your time,

  Eric

  If the computer works fine now, delete the folder. It's an artifact of the installation.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

  Hello

  After a clean install of windows 8.1 the audio beats does not open.

  It appears in the control, but when I click on it nothing happens.

  I have sound, and everything seems to work ok, but I'm curious to know what happened.

  When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

  I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

  Any help would be appreciated

  Hello

  Download and reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• RN v1 duo set for Time Machine and after a clean install of Yosemite I can't access my data

  Hi guys,.

  I have the ReadyNas duo v1 set for Time Machine and after a clean install of Yosemite I can't access my data.

  When I try via the Finder, files look for empty to me while info shows that they are not.

  I have no more support and I tried everything I could but all my data remains inaccessible.

  

  

  I have finally reached my backup via Time Machine, it was temporary unavailable yesterday.

  Thank you guys!

• After a clean install can I still get updates

  I came to the conclusion that I have to do a clean install and the company for the model mark I finally sent the operating system after 4 years now that I have (xp media center) came with sp2... but some how the jerk who took an illegal copy of xp pro also had put sp3 here... so when I do this may reinstall the sp3 from the ms site or I have to keep sp2 here until I can get a new copy of windows?

  And can I still get all the updates I've missed for the years spent 1 1/2?

  COPY of http://groups.google.com/group/microsoft.public.windowsxp.general/browse_frm/thread/93602a125bd8e133

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  * HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install) *.
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

  Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59664.exe

  Another option: click on the following link and click Search now :

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5306751#N2316

  Kind regards.

• No restore factory after a clean install of Windows 7

  Factory support key F11 RnR restores after a clean install of win7?

  I did a new install of win7 and installed a RnR last on my T410. When I tried F11 RnR, there is no option to restore with. My SYSTEM_DRV and Lenovo recovery xxxx exist and are suitable for all the files in them.

  I have recovery disks, but I just what to see if restore factory F11 works on this path.

  Fix. I had already understood what you were doing.

  I'll say it simple as I can:

  (1) installed at the factory

  The secret is windows 7 added windows re (recovery of win7 to the mix environment). Lenovo plant reorganizing this to factory support. This has created a hidden from the factory restore boot entry.

  (2) your installation "sideways", IE, cram lecteurC.

  This wax installation tips from lenovo. That is to say, no factory entry to move to the RNR standalone.

  (3) any property. do not delete anything. (such as SYSTEM_DRV).

  ==

  You have a dead now at the new disk space.  This works. Large.

  Use RNR and backup every week in a place (external). I know that it was not fun, but has been a learning experience.

  ==

  To clarify: (confusion)

  RNR is the main big daddy.  This is the main task is to rescue by using a backup RNR. Recovery (factory) is a subset, not exactly. This just transfers control to another entry for starting a recovery plant stuff. Thus, Rescue and Recovery.  I answer all the time about it. Yes, they look different, they are.

• Threats of virus after a clean install... where is the 'old machine' file?

  My PC has a virus; My anti virus would not repair it... After doing a clean install of Windows XP, I remember reading that I can delete a file named 'old machine' if the new installation worked. I installed Microsoft Security Essentials... For 3 days, everything worked was great until this evening...

  Tonight, I ran an update of virus definitions and then run the 'full' scan Microsoft Security Essentials has notified me that I had a few threats. There was also a warning on a temporary file and asked if I wanted to send it to Microsoft I did...
  I am trying to be proactive and prevention viruses take over this machine again... I remembered reading after installation 'own' that I should remove the file 'old Machine' if the computer works well after the clean install? .. .also had a warning on a temporary file.
  Any idea where I can find the 'old machine' file; (I thought the clean install would remove all)... I did a search on my computer and come with nothing
  Help, please!...

  Hello

  Step 1: You can remove it in c:/Windows. With the help of old cleaning disc.

  In the disk cleanup, select the previous installation of windows. Put a check mark to remove it.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2: Run a virus scan to make sure that the computer is Virus-free:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  For more information:

  The disk cleanup tool stops responding while it is compressing old files on a Windows XP-based computer

  http://support.Microsoft.com/kb/812248

  It will be useful.

• After a clean install of Windows 7, I can't connect to the wireless network and more problems...

  I recently did a clean install of genuine copy of Windows 7 Home Premium to clear unwanted programs all on my computer. Because the product key are disabled unexpectedly.

  The installation works fine, but after the installation. I can't connect to a wireless network, because there is no network adapter installed on the computer.

  Also, I can't set my screen resolution of 1366 x 768. Before any new install, the screen resolution sets to 1366 x 768 as native and recommended screen resolution. Now, I'm stuck at the screen resolution 1024 x 768. I need to change the graphics card so my laptop screen can support 1366 x 768? If necessary, please give me instructions on how to do this.

  Thank you.

  Acer Aspire one C5Cbb-722

  Go here, select your model, then download and install the network and video drivers.

  http://www.Acer.ca/AC/en/CA/content/drivers