Pressing the power button opens the marshmallow camera app

Similar Questions

• the iPhone camera App is not memorize the recording mode

  Hello

  I use the default photo from Apple on my iPhone App, especially because I can shoot while the iPhone is locked. No other applications can do that, not even using the Notification Center (other applications for registration as Strava can do it, but not to record video).

  However, I noticed that most of the time (but), mode (video, panorama, photo,...) is not like it was before.

  I turn almost only videos (idling, when outdoors). Whenever I start the camera application, either in the "sweep upward" screen (locked phone), or from the home screen in unlocking the phone, the camera always (or almost) default is still Photo. I have not found a way to default to the video.

  When you have to take action, it is very annoying to have to fumble with the buttons until you can actually draw. Not to mention that the app is so slow that initialize in the meantime, you cannot drag on the video mode (until the camera is completely initialized); then you drag too and the video mode Miss... it's a mess...

  However, sometimes, apparently when you start the camera after making a video, the unit starts in video mode... but you expect it to start in photo mode, you can already drag by anticipation and video mode Miss yet :-)

  The behavior is not very consistent.

  Unless there is something that the camera behave correctly, I think apple should seriously improve at least 3 things in the camera application:

  (1) in previous versions of iOS, the initialization of the camera was not otherwise slow. How about you do it as fast as it was before?

  (2) pass from still photo to video, then to move slow takes too long. The control must be more effective and faster. You should have a faster and more direct access to the different modes of recoding. How about a configurable "by scanning screen?

  (3) the camera app to set the frequency of default images for videos. What about settings for the default recording mode? (video, panoramic)

  Hi there redtomato,

  I understand that the camera on your iPhone app will automatically in video mode you want. If I always had to take videos, I think it would be very convenient to open the camera in video mode application every time I opened it.

  I tried what you said on my end, opening the camera my screen lock and video mode change application then blocking of my iPhone, and then repeat the same steps. Surprisingly, when I conducted my test of the camera to video mode application.

  I'm quite uncertain that if if it is a small problem with iOS, or if it was something that apple designed specifically, or maybe I'm just having chance repeating the steps you mentioned. To help troubleshoot your device, I recommend you to make sure that you use the latest version of iOS if your device is up to date. Once you have done this, try to restart your iOS device and see if you're still having problems.

  On reflection, maybe you can force the camera app to quit smoking? If this is the case, this could explain why you may need to manually change the camera in video mode application each time.

  I think your suggestions are great ideas, and if you want too, you can submit your ideas to Apple directly here: http://www.apple.com/feedback/.

  I love my iPhone and I like the camera on it and especially photography, so I can understand how you feel about the inconvenience, but I really hope the information I've provided help it it, otherwise, if all goes well it will be or is somehow.

  Continue to take great videos!

• The Microsoft camera app does not work... I got the message: 'Add photo '...

  I have improved my Pavilion dv6-2151lc to Windows 8...

  The Microsoft Windows 8 camera app does not work... When I opened the application, received the message: 'Add camera '.

  I tried to download the drivers from HP, but found no driver Webcam for Windows 8...

  Try your Win 7 webcam software, should work to win 8:

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49996.exe

• The camera app stuck and camera screen is off.

  Original title: using the camera in windows application 8

  I took a video of 4 seconds with the video camera app and now the screen is stuck in 4 seconds at the bottom of the screen and the camera is not turned on. There is no arrow on the right or left side of the screen to access the video either. Please tell me how this erase and start over. Thank you very much.

  Hello

  All other applications work properly on the PC?

  If the camera app is still stuck, then I suggest you to complete the application process camera from the Task Manager.

  a. from the desktop, right-click on the taskbar and choose Task Manager.

  b b.. now, on the process tab, select camera and click on end task.

  Please note: the camera app can stay or come slowly if you have just started Windows, or have simply picked up the PC from sleep. If the PC performs a large amount of background processes, as it does when the start or resumption of his sleep, this will affect the performance of the camera application. The app must iron out and improve performance in a short period of time, when there is less background running processes.

  You can run the Troubleshooter of Apps.  This tool can automatically identify and fix problems with the applications.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Webcam not working not not in the metro style apps, but working in desktop applications.

  I use windows 8 pro edition on my desktop. It doesn't have a built-in webcam. I use Zimny-700wc cobera webcam. I installed the software and it works very well in desktop applications, but it does not work in windows 8 metro style apps like camera application. I'll try to find a solution for a month, but I have failed every time.
  This is my first Forum. Please help me.
  Thanks in advance

  Hello

  Right-click on the camera application and select uninstall. Then, from the Windows Store, search for camera and install the exact camera app.

  If this does not work, you may need to reinstall the webcam.

• WEBCAM HP HD 3100 want support for windows 8 pro camera app

  Hi, this is first time I write a post, because I am not able to find any support for my HP WEBCAM HD 3100 for windows 8 pro , with windows 8 I have a camera app name , and what problem I face is that whenever I want to use my webcam with this application, the error message has just been not detect camera , I went for the support of the windows forum 8, they said to refer to the manufacture for driver problem, and there is not the issue, that the software HP HD 3100 driver installation is ARCHSOFT and ARCSOFT I VISION which I had already installed on my PC, the webcam works perfectly with other services webcam chat webcam with another application , Its just that it does not work with the individual CAMERA app.

  Please tell me what I can do to remove this problem with the camera application.

  Respect of

  Amit

  Yes, it is compatible with Windows 8.1 since it works in my laptop even without installing the supplied software suite. I had to install it for Win XP but win 8 pilots inside to operate the camera. Try it on a different usb port. Remove and uninstall the software from the Control Panel programs and do a system restart. Let the appliance must be installed by windows with it is in built drivers. This would remove any incompatibility between Windows and drivers you have installed.

• Xperia Z5 camera app

  Hello

  TP just wanted to bring something up and I hope to find answers because when I called customer service they seem to not really know anything.

  I got my Xperia Z5 yesterday and played with her. I know that the announcement at 2015 IFA there is a revised camera app to go with the new sensor; It is proudly displayed on the Sony site, when you look at the Xperia Z5 Product Page. However, my Z5 has the old camera application which was perhaps for the launch of Z1. When I spoke to the woman on the phone, she said this is how it is supposed to be. I have explained on the new application and she said "well I have a Z5 in my hand now and he looks at how he has always done." That's my problem, it shouldn't do...

  When I explained that there is a new application, she kept just explain on how one in his hand has the same application as the Xperia had for a few generations.

  Therefore, my ad here. I hope that I will find someone who A) will simply ignore my explanation on the new camera app and B) may be able to provide me with an answer as to why it is not on my phone.

  Many thanks in advance,

  Kind regards

  Mike

  Sony rushed the new phones at the door before the new software was ready, he's going to be delivered as an update before Christmas.

  New topic series Xperia Z5 camera interface

• macOS Sierra - press and hold the power button to enter the mode 'sleep'

  I recently updated my MacBook Air (13 inch, early 2015) model of El Capitan macOS Sierra 10.12. Before the update, hold down the power button / stop for 2-3 seconds, put the machine in standby mode. It does not properly after the update. Release the power button to switch to sleep mode works only once after each time you start the machine.

  I know he has an option to set the mode of sleep using Ctrl + button / stop and by selecting one of three options to restart, sleep and Shutdown, but who needs 3 more click click and is not fast. Also, independently of any application that is open, pressing the button walk / stop worked fine before the update, but now I need to be on the desktop even do Ctrl + Power button work.

  All patches available for it? Miss me the old way of put my Mac to sleep I do not remember if I did some tweak in my Mac, or was it a default feature...

  Greetings jainam2209,

  Thank you for using communities of Apple Support. It seems you want to put the Mac to sleep, but it does not always work.
  I would recommend read you these articles, the first article explains the ways that macOS Sierra is supposed to go to sleep.
  The second article can help if the computer won't sleep when you're trying to sleep.
  

  macOS Sierra: put your Mac to sleep

  macOS Sierra: If your Mac won't go or stay asleep

  Take care.

• HP Pavilion DV7 laptop: Touchpad, sometimes active, even when the power button is pressed on off (light orange)

  I use a wireless mouse (or a wired mouse) preferably instead of the touchpad.   The touchpad has a power button to press - white light indicates on and off Orange light.    After booting, I usually disable the touchpad and mouse wireless, however, sometimes when you type I realize my palms are contacting the touchpad and the cursor jumps around accordingly.    The touchpad is disabled (orange light) but I can control it with a finger, it works like its supposed to as if it is enabled.     Any ideas?   I have not downloaded a driver updated or do anything to try to solve this problem, as I fear, it could actually cause other problems.

  Update the driver it is the usual Council for problems - that is the solution here?   Has anyone else had a similar problem.    Most of the touch pad problems I've read is in regards to an erratic touchpad - nothing to do with 'on' or 'off' problems.

  HI @WayneCM,

  Thank you for your inquiry. I will do my best to help you!

  I understand that you use the power button / stop to turn off the touchpad.  Sometimes, you will notice that your palm is in contact with it and the cursor is accordingly jump around but the rest light orange, to show that he has disabled.  Here is a link for HP Notebook PCs - using the touchpad and ClickPad (Windows 10). Please review the section on "Open the properties of the ClickPad" in figure 4, you'll see there's a button where you can disable the touchpad, until you want to reactivate it. Please let me know if this helped.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on ' Thumbs Up ' to give me a Kudos.

• Tecra 5200 - nothing happens after pressing the power button

  When I press the 'power' of my Tecra 5200 kids button nothing happens, only the front panel power led lights, but laptop does not start - in fact, nothing happens.

  Earlier, I lived as a result of problems;
  -the internal HARD drive didn't work, so I put the HARD drive in the Select Bay adapter and switched 2 hard drives (for each child 1 HDD with their own software / games)
  -computer had very hot on the surface (I had tried to open the computer and to clean inside, but it is still very warm)

  Now to my question.
  -If the computer does not start, is because of the HARD internal disk problem (found out once in awhile, he recognizes an old HDD, I had attached to internal port, otherwise the DVD player was not working)- and an easy repair is possible
  - or would it be possible that the CPU got too hot and bust, which means that I spend any money on the repair.

  I hope someone can help and give his opinion.

  > Toshiba guy;
  > Please publish guides on your website on how to open the 'old' notebooks, in fact no one would spend money to repair them.
  I agree with you. I don't think that someone will spend a lot of money to pay reparations for these old books.

• 15 170tu ac: I HAV to press the power button several times to start the laptop...

  I HAV to press the power button several times to start the laptop... works well with the power supply on.

  all My drivers & bios is updated... but when I opened the lid... I HAV poer press several times the button and he then began 4-5 min.

  Hi @Vishalwagh123,

  Welcome to HP's Forums a great way to get help. It's a great place to find answers and advice! Thanks for the post.

  I understand you have questions turn on/off the device and you must press the power button several times for him to start. I'll be happy to help you.

  Please try these steps first. Perform a hard reset.

  • Steps to do:
  • Turn off the computer and unplug the charger. Then remove the battery.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.

  If it fires up immediately the issue is resolved. Otherwise, try to turn on the computer without the battery and check that it works immediately.

  In your message, you said that it works very well with the charger. However, I need more clarity here to help you better.

  It works immediately when the adapter is connected and the power button is pushed only once?

  If you again press the power button several times, it may be a faulty power button, and you will need to contact the hotline at the service of the unit.

  Let me know what happens when you try to turn on the unit without the charger?

  Visit this link to contact support phone:

  http://HP.care/2bjG4nE

  Hope the problem is solved without hassle. Please keep me in the loop.

  Take care and have a week Holy.

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

  Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

  Hi John,.

  Please let me know exactly what happened when you tried my suggestions of first and second.

  Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

  When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

  With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?

  Tricky

• My laptop will not be closed unless I have press and hold the power button

  Computer laptop MU shut unless I press the power button. There is no closing

  Go to control panel-> Power Options control. Click on choose what the power button and the click of the left mouse.

  Look at the options. Select other options to test.

  Also, see the documentation that came with the computer or the web site of the manufacturer for other possible options.

  It is possible that the laptop tries to install updates and the process is blocked somehow.

  Tom Ferguson

• my laptop stops automatically and randomly and start again after pressing the power button / stop

  Hello

  my laptop stops automatically and randomly and restarts after pressing power button.my pc running windows 8 version of system.can you please solve this problem.

  Hello

  Check if the quick start option is enabled, your laptop. Here are the steps:

  1. open the Power Options window. Use one of the following methods:

  A. press the WIN + R keys at the same time to launch the Run dialog box. After that, type powercfg.cpl , and then press enter.

  B. press the WIN + X keys at the same time to launch WIN + X Menu. After that, select Power Options.

  C. the Start screen and the Windows of type power will show the results, select the Power Options.

  2. click on settings , then choose change how the power buttons.

  3. scroll down and look for turn the (recommended) quick start under stop settings.

  4 uncheck the checkbox, and then click save changes.

  Note: if the option has said isn't here, scroll down and select change settings that are currently unavailable to change.

  5 restart your laptop.

  Let us know how it goes.