using the CTRL, ALT and delete appears to lock the computer... why

Similar Questions

• Image recovery after the use of Ctrl-alt-shift-DEL in a collection

  Today a do a really stupid move and accidentally used the Ctrl-alt-shift-del to command to remove 31 images from a Collection (so that what I really wanted to do was remove this particular collection. D'oh!!!! D'oh!!!! Oh !!!)

  (It of on a PC running the Version 6.6.1 LR and earn 10, and I learned the command of a post years ago: Re: ways to 'Remove the lot' )

  I immediately is gone in the trash and found 6 images in there and used the restore from Recycle Bin command and I hope that these were "given".

  Can I ask the following prayer:

  1. If there were only 6 images from the trash, does mean that the other 25 deleted images in the collection were Lr Copies of original RAW files and that therefore the 25 Raw original will always be OK? (I use Copies a little bit, but without a way to check I don't know)  Is it correct to assume that Lr destroyed all Copies for good in this scenario?
  2. Are there any other "recovery protocols" I can try to restore images of 31 'that '?
  3. As of the best way to re - synchronize the 6 files that I restored the trash? Should I use synchronize folders?

  Now, IF I have lost the RAW files (which is my real concern here) I have recent backups and full on external hard drives of all catalogs and all RAW images too which will contain these 'lost' images (if RAW OR just copy), BUT is it a protocol of identification in some way what specific files have been deleted and copy then back ' up' one of the backups I have? (Spirit I don't know which files have been deleted!) I am wary of simply copying all THE catalogs and the Backup Images, because this will cancel the other recent work, I am ideally looking to just put in the articles 'lost' if it's possible?

  Thanks in advance for your help on this messy problem!

  1. CTRL-Alt-Shift-Delete Deletes immediately and without a prompt dialog box photos from Lightroom and your hard drive. If they original RAW photos are not in the trash, and then they are not on your computer. The photos are imported is not as your catalog. There is no such thing as "Lr of Copies of original RAW files"
  2. You can try a program called "undelete utility.
  3. Never tried, but certainly import would work here, but see my next paragraph

  Now, IF I have lost the RAW files (which is my real concern here) I have recent backups and full on external hard drives of all catalogs and all RAW images too which will contain these 'lost' images (if RAW OR just copy), BUT is it a protocol of identification in some way what specific files have been deleted and copy then back ' up' one of the backups I have? (Spirit I don't know which files have been deleted!) I am wary of simply copying on all catalogs & Images of backup, because this will cancel the other recent work, I am ideally looking for simply put in the articles 'lost' if it's possible?

  You must copy a recent backup of the file catalog somewhere else (not in the same folder as the backup), and then double-click it to open it. Your changes and the metadata provided by the user are here. Use the command search for the missing files to Lightroom to determine which photos are now missing. Then copy backups of photos you want to the location in your original folder hierarchy that these photos were previously. This should be the photos to be reconnected in Lightroom.

• window will stop in less than a minute, stops and restarts everytime I use the computer

  message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer

  Hello

  ·        This happens randomly, or when you open any application on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Check the event viewer for the newspapers and let us know. Follow the steps mentioned in the link below.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 1:

  Step 1:

  I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  I suggest you do a clean boot and see if the problem still occurs.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 2:

  It may be there is a scheduled task on your system. Check in Task Scheduler and if there is no scheduled tasks then, remove and check if the problem persists.

  Automate tasks with Task Scheduler

  http://Windows.Microsoft.com/en-us/Windows-Vista/automate-tasks-with-Task-Scheduler-from-Windows-Vista-inside-out

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Why is my desktop stop often randomly, at all hours of the day and night without prompting even when I use the computer. This is even though I changed the power option setting.

  Why is my desktop standby stop so often?

  It appeared sometimes several times per day or night. He stops consecutively, at random, at any time of day or night time. Even when I was with the computer, there is no incentive to me. The screen is blank. My computer nevers switch down. It's on 24/7-24 hours and 7 days, 365 days.

  It happened like this:

  1. you can hear the exhaust off the computer fan all of a sudden. There was no incentive. You can hear computer calmed down suddenly. The fan can be seen from the back of the grid of ventilation of the processor of the computer of the metal casing.

  2. the screen monitor suddenly stop. The screen is blank. The indicator light on the bottom of the screen of the monitor is always lit. He showed the monitor screen is on and running.

  3. When you look at the led on the computer, it is still lit. This shows that the computer has on photo and runnig. It is dormant, however.  He showed the computer CPU is entered in mode 'sleep'.

  4. whenever this judgment occurs, I would like to shut down the computer and restart the computer from scratch. I pressed the power button on the computer to stop it.

  5. I then press again the start/stop button to restart the computer, restart the computer, and then when she comes back to life, I clicked to restore sessions, and then I keep using the computer again.

  6. the process of restarting the computer was like that, as stops have been going like that for five months and is always like that, because I have been unable to solve. The point of contact in the power button is not more urgent are frequent.

  7. I changed the VGA cable as I said by a computer hardware that my problem could be due to the VGA cable is old, as in the VGA cable copper wire that feeds on the computer to the monitor screen can be broken or twisted, and so the video signals are not stable to feed the data to the screen of the monitor.

  8. Although I don't think that was the case, as my cable never touched the ground, or cluttered or kick or broken, I still went ahead to change the existing cable 15 pin VGA to 3 years with a new as it was only 3 males - the range of the cheapest I found in the shop costs...

  9. However, even if the VGA cable is changed, the stop is always the same, as before.

  10. on another month, I learned by my friend that I should change the setting in the computer mode 'sleep'.

  11. the new settings made in start/programs/system and Security / Option/power Power Plan/High Performance / 'Turn off display' to 'Never' and 'Put on the eve of the computer' to 'never '.

  12 even if I changed the setting of "Balanced (recommended) 'High Performance'" and two high-performance setting has been changed to "Never", the judgment fixed computer sleep mode, and as usual, no warning, the screen of the monitor erased.

  13. it seems the Option "power" and "Power Plan" and "Balanced" or "High Performance" in Windows 7 does not work. Window 7 does not in my computer.

  14. whenever I rebooted and restarted the computer, it is some normal time to see the operating system, repair files stop suddenly, before may be back from normal window of operation conditon.

  15. for more information,.

  My computer is not a brand. It was customized and installed. He bought two or three years ago. The use of the 350 GB hard drive is used by 50%. The computer in the past goes to sleep when there is no movement of the mosue for 15 minutes, or when not in use. He wakes up again when there mouse moves to restart the CPU and turn on the monitor screen.

  Now, he had problem with this kind of stop suddenly attack never wake up its "sleep" again during the month five, which I believe it was several viruses in the files of e-mail in the past months, and when it is very likely that I downloaded from CNET some cleaners or anti-spyware.  I don't know what problem is.

  I then withdrew them a month later of the program/Control Panel / uninstalled program. On the advice of my friend, I then changed version free download AVG.

  16. the information contained in the computer, start/program/computer/properties, gives the following information:

  It's Intel Core Due E7500 @ 2.93 Ghz, 4 GB of Ram, 32-bit operating system, windows 7 Home Premium, 2009.

  It is a Microsoft Firewall protection and is installed with fre download AVG anti-virus protection. He is shown to start/program/system and security / firewall /- and he said: 'Stat window firewall' is 'on '.

  17, finally, with the light of the foregoing, I would sincerely ask the Microsoft community to help solve this problem of closure. I would like to thank all the people in the community who can help me in advance here.

  18. I hope to hear your solutions with you. Thank you.

  Run "cleaners" or optimizers may have caused a number of problems.

  And since you have them installed some time ago a system restore won't help.

  Run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Run a scan for malware http://www.malwarebytes.org/products/malwarebytes_free/

  Maybe to repair your installation of win

  Ensure that the chipset drivers have been updated by the author of the motherboard

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• I had a power surge and I couldn't use the computer. Blue screen error: RQL_NOT_LESS_OR_EQUAL

  Original title: RQL_NOT_LESS_OR_EQUAL blue screen

  Windows Vista Home Pemium

  System
  Hewlett-Packyard
  Model:-s3580a
  RAM memory (RAM) 2.00 GB
  Type of system: - 32 bit - OS

  I get a blue screen with this message. Sometimes it's memory something...

  Win32k.sys - address 972FC9CF base at 9726000, DateStamp 4f79ab49 STOP: 0x0000008E (0 x 0000005, 0x972FC9cCF, 0xA72AACAB, 0x00000000

  I had a power surge and I couldn't use the computer. When she did finally after 4 months, he would sometimes load. Now in the past 2 months, the computer has been great. A bit slow sometimes. Now, I get this message. How can I fix?

  Neva mind, I got the number fixed... with a new hard drive... lol.  My other drive hard :*(broken

• computer automatically opens Internet start up how can I stop this? When I would use the computer and open internet when I'm ready to use it

  computer will automatically connect to IE start up how can I stop this.

  When I would use the computer and open IE when I'm ready to use it.

  I have a ZYXEL router.

  This has happened only since I checked a pop box that says connect automatically very stupid, I know, but now can not cancel.

  help please

  Hi Tansy,

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I understand that you want to disable the open Internet Explorer at startup option.

  Method 1
  Step 1: I suggest to start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem is solved in SafeMode with networking, then I suggest to perform clean boot and remove the program that is causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  See also: Stop a program from running automatically when Windows starts
  http://Windows.Microsoft.com/en-in/Windows7/stop-a-program-from-running-automatically-when-Windows-starts

  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you

• FBI scam and not being able to use the computer

  I used you tube yesterday evening to watch a video "elmo" for little girl, and this morning I got a screen that says FBI

  and I couldn't use computer until I paid 200.00 to green dot pre paid card.  I Googled it and said it was a scam

  and I could use the computer in safe mode, but I'm stuck now and don't know what to do.  I did a Norton scan and a

  free scan Microsoft security, and both show computer is fine, but I can't use the computer in normal mode.

  So what's up? What can I do?  Help! Please

  Hello

  1. excatly are you referring to when you say "tube"?
  2. What exactly happens in safe mode? When you say "stuck now" what error or problem you are facing?
  3. You are not able to start the computer in mde normal? What exactly happens when you try to start in normal mode?
  4. You receive an error message?
  5. What exactly is the problem you are having?

  If it works fine in safe mode, and then perform a clean boot.
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: Once you have completed troubleshooting, perform step 7: to reset the computer as usual from the article mentioned above.

  I hope this helps!

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• on paint it willnt allow to use the text why

  on paint it willnt allow to use the text why

  Hi logannill,

  What version of windows are you using?

  You can add text to pictures using paint, you can follow the steps below

  1. open MS Paint your current photo.

  2. find the area where you want to add text.

  3. Select the text tool, represented by the letter A, in the box to tools on your left.

  4. position the cursor on the location where you want the text to start.

  5. Select the font style and size of the help box that appears when you select the tool.

  6. start to type. You will see the text added during typing. It is a good indicator of how it will look when you are done.

  7. click outside of it, and it will be fixed on your photo. If the spacing, size or placement is not quite right, scrap it and start again by selecting 'Cancel' in the Edit menu, and then restart the process again

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've e-mailed photo now I can't use the computer! What should I do now?

  What I've done wrong? Cannot use the computer? Computer says error! What is the future. ?

  I turned everything off and re started, seems ok, but I'll try and sent pictures of different e-mail.

  Thank you

• I am trying to download an application on my cable company, but it won't be over because my computer 'administrator' will not allow him. How to solve this. I'm the only person using the computer.

  I am trying to download an application on my cable company, but it won't be over because my computer 'administrator' will not allow him. How to solve this. I'm the only person using the computer.

  Start > run > control userpasswords2 > OK

  will take you to what you need to access and change permissions for logon not required

  On the users tab uncheck users must enter a user name and password to use this computer

  other options are available to facilitate access

  If a default administrator password has been entered it would probably be adminpass or empty field

  In both cases, it would be entered twice or white field, then move the cursor to confirm the blank

  as non-existent password then confirm white... you see an empty field is itself a password.

• How can I not access a file if I am the only person using the computer?

  If I'm the only person using the computer, I'm the administrator? How can I deny access to all users. documents? I'm trying to set up Quickbooks and realized that I have limited access.

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

• To use the computer with the different Flight Simulator equipment that is only compatible with 32-bit versions of Windows

  Original title: change the version of Windows

  I have a computer used only for Flight Simulator and is running Windows 7 Home Premium 64-bit.  I want to use the computer with the different Flight Simulator equipment that is only compatible with 32-bit versions of Windows.  Is there a way I can upgrade to Windows 7 64 bit for Windows 10 32 bit and enjoy free upgrade of Windows 10?

  No, the upgrade program will replace existing windows with the same number of bits, 32 to 32 and 64 to 64.

  Even within the same version of Windows, passing from 32 to 64 and vice versa requires a clean installation.

• Whenever I use the computer, I get the message "install new updates"

  The most recent 2 Win7 security upgrades/downgrades are on my computer. I checked.

  Whenever I use the computer, I get the message "install new updates"

  How to set the flag that says I have miserable things?

  Thank you

  Trevor

  Original title: upgrades

  Hello Tworg,

  Thank you for the update on the question and sorry for a delayed response.

  If your Windows Update history shows that .NET Framework 4.5.1 is installed successfully. If troubleshooting says ' registration for the service is missing or corrupt... not fixed "then you can try the methods provided below and see if help."

  Method 1

  I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Method 2

  If after performing more high question method persists try to follow the steps described in the following Microsoft article methods.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Important:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.